20A 300W Synchronous Buck Converter CC CV Power Module

Description

Power LED lighting and battery charging applications can use this 20A 300W synchronous buck converter for adjustable constant-current and constant-voltage output. Its non-isolated design steps down a higher DC input voltage without boosting.

Set the output voltage and current using the CV and CC potentiometers. The module supports 4V, 6V, 12V, 14V, and 24V battery charging, including lithium, ferroelectric, nickel-cadmium, and nickel-metal hydride battery packs. It is also suitable for solar panels, wind turbines, and high-power LED constant-current drive.

  • Adjustable output: Set voltage from 1.2–35VDC and current from 0.2–20A.
  • Protection: Includes instantaneous output short-circuit protection.
  • Wiring: Connect through the wiring terminals.

Use a discharged battery when adjusting charging current. Add a fan when the power tube exceeds 65°C, and reduce the rating for high-voltage output. This buck converter is intended for regulated DC step-down power and charging use.

Specifications

  • Module type: Synchronous rectification, non-isolated buck CC/CV module
  • Input voltage: 6–40VDC
  • Output voltage: Continuously adjustable from 1.2–35VDC; suitable for long-term use below 32V
  • Maximum output current: 20A
  • Long-term output current: Within 15A
  • Current limiting range: Adjustable from 0.2–20A
  • Low voltage difference: 3V
  • Operating frequency: 150kHz
  • Conversion efficiency: About 96%; varies with voltage difference and use environment
  • Output ripple: About 50mV, excluding noise; 20MHz bandwidth reference measurement at 24V input
  • Working temperature: -10 to +75°C
  • Adjustment direction: Clockwise increases; counterclockwise decreases
  • Output short-circuit protection: Yes, instantaneous protection; constant-current output must not remain short-circuited for a long time
  • Input reverse connection protection: No
  • Output anti-reverse current: No; an external diode is required for self-powered or inductive loads
  • Dimensions: 60 × 53 × 30mm
  • Weight: About 85g

Adjustment

  • Voltage: Adjust the CV potentiometer to the voltage required by the load.
  • LED current: Turn the CC potentiometer counterclockwise about 30 turns, connect the LED, then adjust to the required current.
  • Battery charging: Discharge the battery, connect it to the output, and adjust CC to the required charging current.

Packaging

  • One package weight: 0.10kg / 0.23lb
  • One package size: 7 × 7 × 6cm / 2.76 × 2.76 × 2.36in
  • Quantity per carton: 175 pieces
  • Carton weight: 18.60kg / 41.01lb
  • Carton size: 51 × 37 × 32cm / 20.08 × 14.57 × 12.6in
  • Container loading: 20GP: 441 cartons × 175 pieces = 77,175 pieces; 40HQ: 1,025 cartons × 175 pieces = 179,375 pieces
Package Weight
One Package Weight 0.10kgs / 0.23lb
One Package Size 7cm * 7cm * 6cm / 2.76inch * 2.76inch * 2.36inch
Qty per Carton 175
Carton Weight 18.60kgs / 41.01lb
Carton Size 51cm * 37cm * 32cm / 20.08inch * 14.57inch * 12.6inch
Loading Container 20GP: 441 cartons * 175 pcs = 77175 pcs
40HQ: 1025 cartons * 175 pcs = 179375 pcs

20A 300W Synchronous Buck Converter CC CV Power Module

Product form

Power LED lighting and battery charging applications can use this 20A 300W synchronous buck converter for adjustable constant-current and constant-voltage... Read more

$21.51 Excl. VAT

    • Guaranteed secure & safe checkout.

      shop pay
    • Free standard shipping on eligible products
    • No hassle returns, 14 days return
    Pay whenever you want

    Easily pay within 30 days after you have received your package. 
    Read more

    Description

    Power LED lighting and battery charging applications can use this 20A 300W synchronous buck converter for adjustable constant-current and constant-voltage output. Its non-isolated design steps down a higher DC input voltage without boosting.

    Set the output voltage and current using the CV and CC potentiometers. The module supports 4V, 6V, 12V, 14V, and 24V battery charging, including lithium, ferroelectric, nickel-cadmium, and nickel-metal hydride battery packs. It is also suitable for solar panels, wind turbines, and high-power LED constant-current drive.

    • Adjustable output: Set voltage from 1.2–35VDC and current from 0.2–20A.
    • Protection: Includes instantaneous output short-circuit protection.
    • Wiring: Connect through the wiring terminals.

    Use a discharged battery when adjusting charging current. Add a fan when the power tube exceeds 65°C, and reduce the rating for high-voltage output. This buck converter is intended for regulated DC step-down power and charging use.

    Specifications

    • Module type: Synchronous rectification, non-isolated buck CC/CV module
    • Input voltage: 6–40VDC
    • Output voltage: Continuously adjustable from 1.2–35VDC; suitable for long-term use below 32V
    • Maximum output current: 20A
    • Long-term output current: Within 15A
    • Current limiting range: Adjustable from 0.2–20A
    • Low voltage difference: 3V
    • Operating frequency: 150kHz
    • Conversion efficiency: About 96%; varies with voltage difference and use environment
    • Output ripple: About 50mV, excluding noise; 20MHz bandwidth reference measurement at 24V input
    • Working temperature: -10 to +75°C
    • Adjustment direction: Clockwise increases; counterclockwise decreases
    • Output short-circuit protection: Yes, instantaneous protection; constant-current output must not remain short-circuited for a long time
    • Input reverse connection protection: No
    • Output anti-reverse current: No; an external diode is required for self-powered or inductive loads
    • Dimensions: 60 × 53 × 30mm
    • Weight: About 85g

    Adjustment

    • Voltage: Adjust the CV potentiometer to the voltage required by the load.
    • LED current: Turn the CC potentiometer counterclockwise about 30 turns, connect the LED, then adjust to the required current.
    • Battery charging: Discharge the battery, connect it to the output, and adjust CC to the required charging current.

    Packaging

    • One package weight: 0.10kg / 0.23lb
    • One package size: 7 × 7 × 6cm / 2.76 × 2.76 × 2.36in
    • Quantity per carton: 175 pieces
    • Carton weight: 18.60kg / 41.01lb
    • Carton size: 51 × 37 × 32cm / 20.08 × 14.57 × 12.6in
    • Container loading: 20GP: 441 cartons × 175 pieces = 77,175 pieces; 40HQ: 1,025 cartons × 175 pieces = 179,375 pieces
    Package Weight
    One Package Weight 0.10kgs / 0.23lb
    One Package Size 7cm * 7cm * 6cm / 2.76inch * 2.76inch * 2.36inch
    Qty per Carton 175
    Carton Weight 18.60kgs / 41.01lb
    Carton Size 51cm * 37cm * 32cm / 20.08inch * 14.57inch * 12.6inch
    Loading Container 20GP: 441 cartons * 175 pcs = 77175 pcs
    40HQ: 1025 cartons * 175 pcs = 179375 pcs

    Our Best Sellers

    See what everyone’s loving. Find your next favourite!

    Returns & Delivery

    When will my order be delivered?

    Shipping availability varies by product and destination. Available delivery options and estimated timeframes are shown at checkout. After placing your order, you'll receive an email with tracking details and delivery information.

    Can I return my product?

    Orders can be returned or exchanged within 14 days of receiving the parcel, providing they are in original resalable condition.

    What can I do if my item (or part of it) is damaged?

    We work hard to deliver your items without damage. Orders can be returned or exchanged within 14 days of receiving the parcel, providing they are in original resalable condition.

    Recently viewed products

      © 2026 Syndmart, Technologia Shopify

      • US (USD $) US (USD $)
      • Polski - flag Polski - flag
      • American Express
      • Apple Pay
      • Bancontact
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • MB WAY
      • PayPal
      • Satispay
      • Shop Pay
      • Visa