Auto Replacement Parts

This 3-pin car toggle switch features red and green indicator lights for clear status visibility. It is designed for 12/24 V DC vehicle circuits. Use it on dashboards or accessory panels to control lights, relays, or power feeds. The dual-color indicators help you confirm when the circuit is active. 3-pin wiring enables straightforward installation. DC 12/24 V compatibility suits most vehicles. Red and green indicator lights show switch status. Universal car use for dashboards, relays, and power feeds. Includes 1 x switch in the package. Durable, compact housing suitable for in-dash mounting. Low current draw helps minimize battery impact. Indicator LEDs provide quick status cues while drawing minimal current from the vehicle electrical system. Fits standard 3-pin toggle footprints; verify panel cutout and wiring before installation.

Read more less

Compact 5-pin fog light switch for Toyota vehicles. This cable-free unit is a straightforward drop-in replacement designed for easy dashboard installation. Use it to replace a worn fog light switch or add fog light control in dashboards that lack a dedicated switch. It installs into a standard front-panel hole and does not include wiring. 5-pin electrical connection for reliable control On/Off toggle with a precise action Small footprint and slim profile for tight dash spaces Durable ABS housing with heat and daily-use resistance Cable-free design (no wiring harness included) requires compatible wiring Broad Toyota compatibility: Land Cruiser, 4Runner, RAV4, Camry, Highlander, Hilux, Tacoma, Sienna, Innova, Corolla/Altis, Yaris, Prius, Aurion, and more Fit: Designed to accommodate standard front-panel switch openings in compatible Toyota models with fog-light installations.

Read more less

The Fog Light Switch is a 5-pin On/Off control designed for use with aftermarket fog lamps in a wide range of Toyota models. Constructed from durable ABS plastic, it installs in standard front-panel switch holes for a clean, factory-style look. Ideal for upgrading fog lamp functionality in your Toyota SUV or sedan, this switch supports common 4-wire fog lamp wiring and provides simple, reliable control from the dash. It’s suitable for replacement installations or new builds. 5-pin connector design 4-wire fog lamp wiring compatibility Durable ABS housing Fits standard front-panel switch openings Wide compatibility with Toyota models (Land Cruiser, 4Runner, Prado, Highlander, RAV4, Sienna, Fortuner/Hilux SW4, Tacoma, Tundra, Hilux Revo, Camry/Aurion, Prius, and more) Easy installation with minimal tools Specifications: Connector type – 5-pin; Wiring – 4-wire; Material – ABS. Fit: Designed to fit standard front-panel openings in the Toyota models listed above. Confirm your dash opening before installation.

Read more less

The Car Lip Support Rods are a two-pack telescopic set designed to provide structured support for front and rear lip areas on a wide range of vehicles. Use them to stabilize and position lip spoilers or trim during installation, maintenance, or display. The telescoping design allows you to adjust length to fit your specific lip clearance. Two-pack set includes front and rear bars for versatile use Telescopic design with adjustable length for a precise fit Crafted from steel with wear resistance and higher tensile strength Good seismic resistance helps maintain lip alignment during work Rod surrounds the lip area for secure contact and stability Compatible with a wide range of vehicles and lip styles Specifications: Material - steel; Finish - protective coating; Pack size - 2 pieces; Type - telescopic front and rear bars. Fit: Suitable for most passenger cars with exterior lip designs; confirm lip dimensions and mounting points prior to installation.

Read more less

This 2-pack Telescopic Car Lip Bars are designed for front and rear use, offering adjustable length and a durable steel construction to fit a range of vehicles. The bars are built to withstand normal vehicle movement without sagging or slipping. Use case: Ideal for lip alignment during installation, securing lightweight accessories, or serving as a stable mounting point on sedans, SUVs, and trucks during temporary setups. Material and finish: steel with a wear-resistant coating for lasting durability Telescopic length: adjustable to accommodate different lip widths and gaps Front and rear compatibility: suitable for use on both ends of most vehicle models Vibration and movement resistance: maintains position under common road conditions Easy installation: quick, tool-free setup with reliable clamping Light specifications: two bars per pack; adjustable length to suit various lip dimensions; no power or electronics involved Fit: compatible with a wide range of cars that have front and rear lip bars. Check your lip width to confirm the adjustable range covers your model.

Read more less

Durable Metal Tire Valve Caps are a practical replacement set for cars and everyday use. This 4-pack is made from metal and measures 2.2 cm by 1.3 cm, designed to fit standard valve stems and provide a secure, dust-tight seal. Use them to replace lost or damaged caps, protect valve cores during maintenance, and keep dirt and moisture out of the valve area between tire services. Material: metal with a durable, corrosion-resistant finish Size: 2.2 cm x 1.3 cm Finish: metallic appearance Compatibility: fits standard tire valve stems on most cars and bicycles Seal: tight, dust- and moisture-resistant seal Pack: four caps included for multiple tires Specifications: Material: metal; Size: 2.2 x 1.3 cm; Color: metallic. Fit: Suitable for standard Schrader valve stems on most passenger cars.

Read more less

Two-pack mini car dome tweeters provide a compact upgrade for your vehicle's sound system. They install easily to improve high-frequency clarity without major overhauls. Ideal for replacing factory tweeters or adding a second pair to expand high-end detail in smaller cabins. Compatible with common aftermarket head units and amps when used within the listed power and impedance specs. Two compact dome tweeters in a two-pack Impedance: 4 Ω Max power: 140 W Frequency response: 3.5 kHz–22 kHz Sensitivity: 89 dB/w/m Full-depth basket design for versatile mounting Optional specifications: Max power handling up to 140 W, broad high-range frequency response, 4 Ω impedance; designed for shallow mounting in dash or door panels. Fit: Designed to fit most cars' standard dome locations; verify mounting depth and clearance in your vehicle before installation.

Read more less

The Car DC to DC Converter Power Adapter delivers a compact, efficient way to power 12V accessories from a vehicle’s electrical system. Designed for automotive and mobile installations, it prioritizes reliability and simple wiring. Use it in cars, buses, trucks, EMUs, or solar setups to provide stable 12V power for displays, radios, speakers, and monitoring equipment. High efficiency up to 96% with low heat (max 40°C). Compact, lightweight design for easy installation. Overload, over-current, over-voltage, and under-voltage protection. Epoxy potting provides rugged, moisture, dust, and seismic resistance. Non-isolated topology with integrated switching regulator modules. Soft start at 50 ms; ripple ≤50 mV; fast 200 µs response. Color-coded wiring: red and yellow to positive, black to negative. Fit: Suitable for 12V vehicle power systems including cars, buses, trucks, EMUs, and solar installations requiring 12V loads.

Read more less

This LED on/off rocker switch provides simple control for power accessories in 12V systems. The unit features a SPST ON-OFF design with three terminals and a built-in LED indicator. Use it in dashboards, control panels, or accessory power rails in vehicles, boats, or off-grid setups. The LED indicator helps confirm when the circuit is active at a glance. SPST ON-OFF operation for straightforward control 12V DC rating up to 20A Three terminals with an integrated LED indicator DOT-style 12V illumination for clear visibility Housing made from nylon; terminals are silver-plated brass Compatible with 12V DC systems, suitable for automotive, marine, and RV installations Light specifications: DOT-style illumination uses a 12V LED indicator to show status when powered. Fit: Designed for 12V DC control panels and power accessories in automotive, marine, or RV applications.

Read more less

Compact car fog light switch designed for easy installation in 12V electrical systems. The durable nylon frame pairs with silver-plated brass terminals for dependable connections, and an LED indicator shows switch status. Ideal for aftermarket fog light setups, auxiliary lighting, or work lights in cars, trucks, or SUVs. The SPST ON-OFF control keeps wiring simple and prevents accidental activation. SPST ON-OFF function for straightforward control of fog or auxiliary lights 12V DC rating with 30A maximum current support 4-pin design with an integrated 12V LED indicator DOT-styled illumination provides clear on/off feedback Durable nylon frame with silver-plated brass terminals for reliable connections Compact panel footprint for easy dash mounting and compatibility with common 4-pin connectors Fit: Suitable for standard 12V automotive dashboards and aftermarket fog light kits with 4-pin wiring.

Read more less

The Socket Car Bulb Holder Adapter is a practical 2-pack designed for extending or replacing stock bulbs. It combines durable plastic and metal components for reliable use in standard automotive bulb housings. This adapter fits standard T5 bulb housings, enabling easy extension or replacement. It’s ideal for adding extra signal lights or updating existing bulbs without rewiring. 2-pack design for multiple bulbs Plastic and metal construction for durability Fits standard T5 bulb housings for extension or replacement Pre-wired socket for quick plug-and-play installation Ensures proper fit when matching stock connectors Simple, no-fuss installation with minimal tools Specifications: material—plastic and metal; pre-wired socket; includes two adapters. Fit: standard T5 bulb housing; verify your stock socket to ensure proper fit.

Read more less

Enhance your vehicle's pedal setup with the 3-In-1 Non-Slip Pedal Cover Set for Cars and Trucks. Crafted from stainless steel and rubber, it provides a durable grip while updating the look of factory pedals. Ideal for daily driving, long commutes, or work vehicles where reliable pedal control matters in varied conditions. The non-slip surface helps maintain footing during wet or sweaty sessions without requiring permanent modifications. Three-piece universal set for most cars and trucks Stainless steel frame with rubber grip for durability Non-slip tread improves pedal control on wet or slippery surfaces Easy, tool-free installation without modifications to existing pedals Low-profile design that blends with most interiors Specifications: Material — stainless steel outer frame with rubber grip; Finish — matte silver and black; Set includes three pedal covers; Universal fit for standard pedal layouts. Fit: Universal design suits most cars and trucks; verify fit with your vehicle's pedal size and mounting method.

Read more less

The Waterproof Car Keyless Go Trunk Sensor System enables hands-free trunk access through a foot-activated sensor, integrating with Keyless-Go and electronic tailgate setups. Open the trunk by waving your foot under the sensor, and close it with a button press or another wave. Foot-activated trunk opening with Keyless-Go and the STO system Trunk closes automatically via a button press or a second foot wave Waterproof design for all-season operation Fits vehicles with an external trunk handle or push-button, power or spring-loaded tailgate, and PKE Wiring harness: Yellow/Red ACC, Black GND, White OUT; Green to open button, Blue to tail light Retrofit-friendly installation with existing tailgate electronics The system offers a waterproof design and weather-resistant wiring to support reliability in rain or snow. Fit: Works on vehicles with an external trunk handle or push-button, a powered or spring-loaded tailgate, and keyless entry.

Read more less

Exhaust Tail Muffler Tip Pipe is a stainless steel 2-pack designed for VW vehicles with a 1.4T engine. The tips provide a durable, corrosion-resistant finish for an updated look. Ideal for DIY replacements or cosmetic upgrades when the original tips wear or lose shine. Easy to install without screws or drilling; insert and press to lock onto the tail outlet. Includes two stainless steel exhaust tail muffler tips for VW Corrosion-resistant, rust-proof construction Lock-on, press-in installation with no screws or drilling Compatible with standard tail-outlet on 1.4T VW models Suitable for DIY replacement or cosmetic upgrade Specifications: Material — stainless steel; Finish — natural metallic; Pack size — 2 tips. Fit: Designed for VW models with standard exhaust tail outlets, suitable for 1.4T engines.

Read more less

This stainless steel exhaust tail muffler tip is designed for VW 1.6T applications. It offers corrosion resistance and a durable, low-maintenance finish that enhances the visible tail end of the exhaust. Ideal for DIY replacement or upgrade, it provides a simple, tool-free installation and a refreshed look without modifying your exhaust system. Material: stainless steel for lasting durability. Corrosion resistance: resists rust and weathering. Installation: tool-free, insert and press to lock—no screws or drilling. Compatibility: fits VW 1.6T exhausts with standard tail diameter (verify fit before purchase). Replacement option: practical, straightforward upgrade for worn or dull tips. Fit: Designed to fit VW 1.6T models with compatible exhaust tail, providing a secure, clean finish.

Read more less

This 2-pack stainless steel exhaust tail muffler tips are designed for select VW and Audi models, providing a clean, finished rear appearance and a corrosion-resistant, rust-free surface. The stainless steel construction is built to endure road conditions and heat exposure while maintaining a subtle, metallic look. Ideal for DIY replacement or aesthetic upgrade, these tips slip over the tailpipes and lock in place with a simple push, avoiding screws or drilling. Stainless steel construction resists corrosion and rust for long-lasting use. Includes two tips for a balanced, paired appearance on dual-exhaust setups. Push-in, lock-on installation; no tools, screws, or drilling required. Durable exterior withstands road debris and heat exposure without fading. Compatibility: VW 1.8T/2T Swept Volume engines and Audi A1, A3, A4L, Q3, Q5. Designed to fit standard tailpipe openings on the listed models (verify diameter). Fit: Works with the specified VW and Audi models; confirm your tailpipe size before purchase.

Read more less

This universal stainless steel exhaust tail tip is designed for 6 cm pipe diameters. Ideal for DIY upgrades or replacements, with a tool-free bolt-on installation (no welding or drilling needed). Compatible with most 6 cm outlet configurations and a broad range of car models. Diameter: fits 6 cm (60 mm) exhaust pipes (measure before buying). Material: stainless steel for corrosion resistance and rust prevention. Attachment: three-bolt clamp provides a secure, tool-free installation. Installation: bolt-on design requires no welding or drilling. Finish: natural stainless steel look; easy to clean and maintain. Compatibility: universal fit with 6 cm exhaust outlets across many vehicles. Specifications: Diameter 6 cm; material stainless steel; mounting system: three-bolt clamp; installation: bolt-on. Fit: compatible with most 6 cm exhaust outlets; please confirm your pipe diameter before purchase.

Read more less

Stainless Steel Exhaust Tail Tip Double Outlet designed for a 6 cm pipe. Built from corrosion-resistant stainless steel, it resists rust and weathering for longer service life. Ideal for DIY replacement projects where a simple, bolt-on tail tip is preferred. No welding or drilling required; the three-bolt design attaches securely to existing piping. Fits 6 cm pipe diameter; measure your pipe before purchase to ensure proper fit and performance. Double outlet design creates a symmetric, sporty appearance and balanced exhaust exit on both sides. Material: stainless steel with corrosion-resistant finish for durability in road conditions. Three-bolt attachment provides secure, tool-free bolt-on installation; no welding or drilling required. Bolt-on compatibility with many standard exhaust systems; compatible with most factory and aftermarket setups. Rust-resistant finish stands up to road salt, moisture, and temperature changes for longer life. Fit: Designed for 6 cm diameter exhaust pipes; verify measurement and clearance on your vehicle.

Read more less

Universal Car Exhaust Tail Muffler Tip in stainless steel with a double outlet provides a practical, durable finishing touch for compatible exhaust pipes. Ideal for DIY enthusiasts replacing a worn tip, or updating the vehicle's appearance without altering exhaust performance. Installation requires no welding or drilling. Material and corrosion resistance: Stainless steel construction resists rust in various conditions. Diameter compatibility: Fits exhaust pipes with a 60 mm (6 cm) outer diameter. Double outlet design: Provides a symmetrical, balanced look at the exhaust end. Easy installation: Three-bolt mounting requires no welding or drilling. Finish and maintenance: Polished stainless surface is easy to clean and weather resistant. Versatility: Suitable for many makes and models with standard 6 cm pipes. Optional specifications: Color: stainless steel; Finish: brushed/satin; Style: double outlet; Installation: three-bolt clamp. Fit: designed to attach to 60 mm pipes using a three-bolt clamp; verify pipe diameter before installation.

Read more less

Curved stainless steel exhaust tail muffler tip with a 6 cm diameter offers a straightforward upgrade for compatible exhaust systems. It provides corrosion resistance and a clean, durable finish that withstands road exposure. Designed as a DIY replacement, it installs without welding or drilling. Simply align with your pipe and secure using the three-bolt clamp. The tip seals around the pipe edge to minimize rattling. Fits pipes with a 6 cm diameter (please measure your pipe) Curved design for a subtle, integrated look Stainless steel construction provides corrosion resistance Three-bolt clamp for tool-free installation No modification to the exhaust system required Curved profile helps blend with most factory or aftermarket exhaust trims Specifications: Material: stainless steel; Finish: curved; Diameter: 6 cm; Mounting: three-bolt clamp. Fit: Intended for 6 cm exhaust pipes. Verify pipe diameter before purchase.

Read more less

The Insulated Terminal Crimp Connectors Kit For Home Wiring keeps connectors and terminals neatly organized in a plastic case for easy access and portability. The kit is suitable for DIY projects and routine maintenance around the home, including basic wiring repairs such as replacing worn terminals on lighting, outlets, or appliance cables. Plastic case with labeled compartments for quick access and secure transport Insulated PVC-wrapped crimp terminals for safe, durable electrical connections Includes a range of connectors and terminals suitable for common home wiring tasks Compact, portable kit designed to fit in a toolbox, drawer, or project bag Components secured in a durable case to reduce loss during repairs and maintenance Fit: Suitable for standard insulated crimp terminals used in residential wiring.

Read more less

This Rubberized Car Wire Terminal Extraction Tool Kit Three Pack helps you remove vehicle wire terminals without damaging connectors. The rubberized grips provide precise handling in tight engine bays. Ideal for automotive electrical repairs, this set lets you push and pull terminal pins instead of prying, reducing the risk of connector damage during service. Three-piece kit for common automotive terminal sizes. Rubberized grips for comfortable, controlled use. Push-pull action preserves terminal integrity. Helps quickly classify and separate wire connectors. Compact tool set suitable for shop or in-vehicle use. Includes a compact storage pouch for quick access. Specifications: Three-piece set; rubberized handles; designed to engage terminals without damage. Fit: Works with standard automotive wire terminals found in most cars and light trucks.

Read more less

This 11-piece auto wire terminal extraction kit provides safe, damage-free terminal removal for automotive wiring projects. Use it to replace damaged connectors, perform routine maintenance, or diagnose wiring by safely extracting terminals without prying. 11-piece set with versatile extraction tips for common automotive terminals Safe, prying-free removal by pushing and pulling pins Works with most standard car connectors and wire gauges Helps identify terminal styles during repairs Compact, portable set fits in tool bag or console Durable construction and organized storage case Includes a simple instruction guide for quick setup and use Compact and portable, with a compact case for easy storage and transport. Fits most standard automotive wire terminals and connectors across common car makes and models.

Read more less

Car Modified Screw Gaskets Set — 24 mm diameter for bodywork. Made from stainless steel for corrosion resistance and long service life. These gaskets are designed for under-hood mounting and fender installations that use 10 mm bolts. The fender washers fit 10 mm bolt holes, providing a stable seal at mounting points. Material: Stainless steel for corrosion resistance Outer diameter: 24 mm (2.4 cm) Thickness: 6 mm (0.6 cm) Universal fit for 10 mm bolt holes under the hood and bodywork Flat washer design for even load distribution Simple, drop-in replacement for standard fender washers No installation instructions included Light specifications: Stainless steel construction; outer diameter 24 mm; thickness 6 mm. Fit: Universal compatibility with common fender and bodywork mounting points; suitable for most cars with 10 mm bolts.

Read more less