The 13mm Degaussing Ferrite Ring Core Cable Clip uses Ni-Zn ferrite to suppress noise on power and signal cables, helping reduce electromagnetic interference around wiring. Clip it near electrical sources or along cable runs to minimize interference in audio, video, and data connections without altering your signal. Material: Ni-Zn ferrite for stable, durable performance. Inner diameter: 13 mm; fits cables 9–13 mm (0.35–0.51 in) in diameter. Installation: elastic clip design; easy to install, removable, reusable. Compatibility: car DVR, headset cables, speaker wires, USB, mouse, keyboard cables, and more. Signal integrity: non-distorting clamp; does not distort transmission or affect audio/video quality. EMI suppression: reduces external interference around the cable and nearby sources. Specifications: inner diameter 13 mm; Ni-Zn ferrite material; suitable for 9–13 mm cables. Fit: designed for cables with 9–13 mm outer diameter; position near noise sources for best results.

Read more less

The 7-Pin EU Trailer Socket Connector for Trucks and Trailers provides a reliable link between the tractor and the towed vehicle to power trailer signal lights. Built with ABS and copper components, it supports standard 12V trailer circuits and resists outdoor exposure. Install between the tractor and the towed vehicle to activate left and right indicators, brake lights, tail lights, and license plate illumination on the trailer. Material: ABS + copper for durability and conductivity Voltage and power: 12V system, 2W power consumption Waterproof rating: IP67 protection against dust and water Pinout and wiring: 7 pins with color codes for indicators, brake, tail lights, and license lights Compatibility: suitable for trailers and trucks in EU electrical systems Installation position: between the tractor and the towed vehicle Optional light specifications: 12V operation, ~2W draw, IP67 enclosure for outdoor use. Fit: designed to connect between a tractor’s electrical system and a trailer in 12V configurations.

Read more less

This outside door handle replacement is designed for Hyundai Veracruz models from 2007 to 2012. It provides a direct exterior handle replacement for a damaged or worn unit. Ideal for DIY repairs when the outer handle is cracked, sticks, or no longer functions smoothly. Made from ABS with an electroplated finish to withstand weather and maintain an exterior look that matches the vehicle. Material: ABS with an electroplated surface finish for durability OE reference and fit: 82662-3J0106; compatible with Hyundai Veracruz 2007–2012 Installation position: Exterior/outer door handle on applicable doors Finish: Electroplated chrome-like coating for exterior appearance Design: Direct-fit replacement with identical mounting points to simplify installation Compatibility: Aligns with factory hardware for straightforward replacement Optional light specifications: This part does not include illumination features or integrated lighting. Fit: Exterior door handle replacement for Hyundai Veracruz 2007–2012; verify the OE part number 82662-3J0106 and vehicle year for proper compatibility.

Read more less

This 2-pack C-Class Front Inside Door Handle Replacement provides a direct, easy-to-install solution for restoring the interior door handle on select W203 models. Designed for Mercedes-Benz W203 C-Class sedans and wagons from 2003–2007, it helps replace a scratched, loose, or broken front interior handle while keeping a consistent appearance with the original trim. OE: 20381015/6514 Material: ABS Installation Position: Front Fitment: Mercedes-Benz W203 C-Class sedans and wagons (2003–2007): C230 Sedan (2003–2005, 2006–2007); C240 (2003–2005); C280 (2006–2007); C32 AMG (2003–2004); C320 Sedan (2003–2005); C320 Wagon (2003–2004); C350 (2006–2007); C55 AMG (2005–2006) Includes two interior door handles (2-pack) Optional light specifications: None; no electrical connections required. Fit: Front interior door handle replacement for the listed W203 C-Class models.

Read more less

Chrome Exterior Car Outside Door Handle Replacement provides a ready-to-install exterior door handle for compatible Nissan and Infiniti vehicles. Use it to replace a damaged, faded, or loose exterior handle on the outside of the front-right, rear-left, or rear-right doors. Material: ABS with chrome plating Finish: Chrome-plated exterior for a consistent look OE reference: 80640-CA012 Placement: Exterior door handle (outside the door) Compatibility: Infiniti FX35 (2003–2008); Infiniti FX45 (2003–2008); Nissan Murano (2003–2007); Nissan Rogue (2010–2013); Nissan Rogue Select (2014–2015) Function: Replaces damaged exterior handle for front-right, rear-left, or rear-right positions Optional specifications: Chrome plating and ABS construction offer durable exterior hardware with a standard finish to match factory styling. Fit: Direct exterior replacement for the listed models. Confirm the OE number 80640-CA012 and door type before purchase.

Read more less

This Front Leveling Lift Kit provides a 2-inch lift at the front of compatible GM trucks and SUVs, including Chevrolet Silverado models. Constructed from aluminum alloy with a black anodized finish for durability and corrosion resistance. Designed to improve front-end stance and support rear passenger comfort, the kit enables the rear seat to tilt back by up to 20 degrees, potentially easing longer trips for occupants in the back row. Lift height: adds 2 inches to the front suspension. Material: high-quality aluminum alloy with black anodized surface. Finish: black anodized coating provides corrosion resistance. Installation location: mounts on the front chassis area for compatibility with the listed models. Compatibility: Silverado 2007–2019 2WD/4WD; Sierra 2007–2019; Yukon 2007–2019; Tahoe 2007–2019; Suburban 1500 2007–2019; Avalanche 2007–2013. Comfort improvement: aims to reduce rear-seat fatigue on long drives; rear-seat tilt capability. Fits the specified GM trucks and SUVs listed above; verify compatibility with your vehicle year and drivetrain before installation.

Read more less

The Car Engine Pulley Crankshaft Sleeve Adapter 0.75 To 1 Inch enables practical shaft and pulley customization. Constructed from iron with a galvanized finish, it offers durable, corrosion-resistant performance in engine and drive systems. Use this adapter to convert shaft diameters for different motors, adjust pulley speeds without buying new components, and align drive assemblies with existing gearboxes. It supports expanding a larger pulley hole to fit a smaller shaft and can be used with pneumatic crankshafts to accommodate pulleys, gears, and other drive parts. Diameter compatibility: adapts 0.75" to 1" shafts for a range of motors and pulleys. Material and finish: iron core with galvanized surface for durability and corrosion resistance. Versatility: reduces the need to replace motors or pulleys while meeting current speed and power needs. Drive compatibility: suitable with car engine pulleys, crankshafts, belts, gearboxes and related drive components. Installation and fit: sleeve-style adapter designed for straightforward mounting with standard hardware. Light specifications: Size range 0.75–1 inch, material iron, galvanized finish. Fit: Verify shaft diameter and mounting pattern to ensure proper alignment with your system before use.

Read more less

This 30-pack aluminum oil drain plug washers set provides a reliable seal for oil pan drain plugs during maintenance. Designed for oil changes, these washers help prevent leaks and protect engine components by ensuring a proper seal on the drain plug. 30-washers pack Material: aluminum alloy Inner diameter: 13 mm; Outer diameter: 21 mm; Thickness: 2 mm OE numbers: 9043012031, 9008043030, 9008043037, 90430C00058 Installation position: seals the oil drain plug on the oil pan Broad compatibility: fits a wide range of Lexus, Toyota, and SCION models (see compatibility details) Specifications: Aluminum alloy; inner diameter 13 mm; outer diameter 21 mm; thickness 2 mm; pack size 30. Fit: Suitable for the drain plug washer size used on many Lexus and Toyota oil pans; verify your vehicle's drain plug size before replacing.

Read more less

The Car Hose Clamp Set is a 52-piece stainless steel clamp kit designed for dependable hose fastening in automotive, home, and industrial settings. Made from 304 stainless steel with rubber cushions, these clamps resist salt, corrosion, water, and oil exposure. The six clamp sizes cover a range from compact to medium hoses, and the transparent storage box keeps parts organized for quick access. Material: 304 stainless steel with 4 mm rubber cushions for gentle grip and vibration dampening Corrosion and rust resistance suitable for automotive and appliance environments Six sizes: 1/4" (6 mm) to 3/4" (19 mm) outer diameter; band width 12 mm; screw diameter 6 mm Total of 52 pieces in a clear storage box for easy organization Includes flexible range for hoses in engines, coolant lines, air ducts, and machinery Simple installation with standard screw drive; suitable for lightweight or medium-duty applications Specifications: Band width 12 mm; screw diameter 6 mm; steel sheet thickness 0.6 mm; rubber thickness 4 mm. Fits hoses with outer diameters from 6 to 19 mm (approximately 1/4" to 3/4").

Read more less

This rubber engine oil seal helps prevent crankcase oil leaks in select Subaru and Saab applications. It’s designed for durability under prolonged high-temperature operation. Install outside the engine crankcase to seal the joint where oil may escape, helping maintain oil retention and a cleaner engine bay. Material: rubber seal designed to endure long-term high-temperature service. Dimensions: inner diameter 86 mm; outer diameter 103 mm. OE references: 806786030, 806786040, JV16017. Installation location: mounted outside the crankcase. Compatibility: SAAB 9-2X (2005–2006) and Subaru models including FORESTER (1998–2013), IMPREZA (1993–2014), IMPREZA SPORT (2008–2011), LEGACY (1990–2012), OUTBACK (2000–2012), WRX (2014–2015), WRX STI (2014). Function: seals crankcase joint to prevent oil leakage. Light specifications: rubber seal designed for long-term operation in high-temperature engine environments. Fit: verify that the inner and outer diameters match your engine’s sealing surfaces before installation.

Read more less

This Car Air Intake Hose with a 55 mm inner diameter is a practical replacement for the Lexus ES300, years 1999–2001. It uses a rubber construction designed for engine bay flexibility and durability. Use this hose to replace a damaged, cracked, or aging intake hose on the engine side of the intake tract, restoring a secure seal and proper airflow. Inner diameter: 55 mm, sized for ES300 factory intake connections Rubber construction resists aging, cracking, and heat cycles Replaces a damaged engine-side intake hose to restore continuity OE reference numbers 17881-20100 / 17881201006 for compatibility Designed for straightforward installation with standard clamps Key specs: Material — rubber; Inner diameter — 55 mm; Installation location — engine side; Fits Lexus ES300 1999–2001; OE numbers provided. Fit: Lexus ES300 1999–2001.

Read more less

This chrome-silver interior door handle is a direct replacement for the right-side door on specified Vauxhall Corsas. Made from ABS with a chrome-plated finish for a durable, consistent look. Use this handle to replace a damaged or cracked interior door handle on the right front door of a Vauxhall CORSA D (2006–2016) or CORSA MK3 (2006–2013). It provides reliable operation and restores interior access without replacing the full door panel. Material and finish: ABS with chrome plating; silver color Compatibility: fits right-side interior door for Vauxhall CORSA D (2006–2016) and CORSA MK3 (2006–2013) OE references: 13297814 / 136045 Installation: requires a 5 mm mounting hole; designed for interior door use Replacement purpose: replaces a damaged or worn interior door handle Durability: chrome-plated surface resists corrosion and maintains appearance Optional specifications: Material: ABS; Color: Silver; Finish: Chrome plating; Installation aperture: 5 mm. Fit: Right-side interior door handle for Vauxhall CORSA D (2006–2016) and CORSA MK3 (2006–2013).

Read more less

Replacement Left Front Interior Door Handle for Seat Ibiza (2009–2012). Made from ABS with a durable electroplated finish for a stable, long-lasting interior component. This interior handle replaces a damaged or worn left-front door handle. It installs on the inside of the front door and uses OE reference 6J1837113A for compatibility with Seat Ibiza models from 2009 to 2012. Material: ABS plastic with an electroplated finish for corrosion resistance and a clean look Compatibility: fits Seat Ibiza 2009–2012, left front interior door (inside handle) OE reference: 6J1837113A Installation: designed for straightforward replacement with standard mounting points Finish: electroplated surface to match common interior trims Notes: inspect mounting points and reuse fasteners as needed Fit: left-front interior door of Seat Ibiza, 2009–2012.

Read more less

This blower motor resistor regulates the cabin fan speed for Hummer H2 models from 2003 to 2007. Built with a durable ABS and aluminum alloy, it offers stable performance and long service life. If your vehicle's blower speed is erratic or a setting won't respond, this replacement unit restores consistent airflow by accurately controlling the air outlet speed. Material: ABS + Aluminum Alloy for heat resistance and durability Terminals: 36-terminal connection for reliable electrical contact Socket: Male plug for straightforward wiring Installation: Mounted in the air duct of the A/C system OE references: 93803637 / 88986529 / 89023355 / 19331830 / 19329838 / 3GSH-19E624-CA / 4GSH-19E624-AA / 6GSH-19E624-AA Compatibility: Fits Hummer H2, 2003–2007 Specifications: 36 terminals; socket type: male plug; material: ABS + aluminum alloy; installation location: air duct of the air conditioner; OE references listed; compatible with Hummer H2 2003–2007. Fits Hummer H2 model years 2003–2007.

Read more less

The OT Terminal Cable is a durable 1.4 m power lead designed to power mobile devices from a vehicle's 12–24V DC system. It provides a straightforward, secure option for everyday vehicle use. It provides a reliable connection for car-mounted devices like smartphones, tablets, navigation units and GPS. PVC+copper construction for durable, flexible power delivery. 1.4 m cable length for flexible routing and mounting. SAE socket compatible with most motorcycle models and many vehicles. DC12V–24V input range supports cars, motorcycles, ATVs, SUVs, and boats. Waterproof and dustproof cover protects the SAE port from rain and dust. Includes a free 10A fuse for circuit protection. Specifications: Length 1.4 m; Weight 38 g; Material PVC+copper; Fuse 10A. Fit: Works with DC12V-24V systems and SAE ports on cars, motorcycles, ATVs, SUVs and boats.

Read more less

This exterior door handle cover replaces a damaged or worn outer cap on the right-front door. Made from durable ABS plastic, it installs quickly and provides a clean finish without replacing the full handle. Designed to replace the outer handle small cover on eligible Lexus models, it helps maintain the exterior appearance and protects the mechanism during daily use. Material: ABS plastic for durability under daily use. Direct replacement: OE 69217-33040; replaces the damaged or worn outer handle cover. Easy installation: swaps into place from the outside of the door with minimal effort. Compatibility: fits Lexus ES350 (2007–2012), IS F (2008–2014), IS250 (2006–2013), IS350 (2006–2013), LS460 (2007–2017), LS600h (2008–2016). Exterior placement: designed for the right-front exterior door handle cover. Specifications: Material – ABS; OE reference – 69217-33040. Fit: Direct replacement for the right-front exterior door handle cover on the listed Lexus models.

Read more less

Durable Universal 60mm Round AC Air Outlet Vent for RVs offers a reliable vent outlet for mobile living spaces. Made from ABS in black/gray, it provides a sturdy, low-maintenance option for RV air conditioning, buses, and yachts. Use cases include refurbishing RV interiors, replacing damaged vents after travel, or updating a boat or bus AC system to a standard-sized outlet. Material: ABS plastic for durability Opening size: 60 mm Outer diameter: 70 mm; mounting bore Ø46 mm Color: Black/gray Compatibility: Fits standard 60 mm round vents for RVs, buses, yachts Replacement-ready: Designed for straightforward replacement in standard openings Fits standard 60 mm round openings. Please measure your current vent opening to confirm compatibility.

Read more less

Replacement steering wheel clock spring for Toyota Camry models 2010–2013. This part serves as a direct substitute for the factory clock spring, preserving steering wheel control connections and the airbag circuit. OE reference 84306-06180 is provided for cross-checking; please verify the OE number before purchasing. Use this part when steering wheel controls (audio, phone, cruise) stop responding or after airbag service, to restore reliable electrical paths through the column. Direct replacement for Camry 2010–2013 clock spring OE reference 84306-06180 for cross-checking Material: plastic, compact design suitable for steering column Easy installation with common hand tools Maintains steering wheel control signals and airbag connector integrity Specifications: Material is plastic. OE reference 84306-06180. Fits Toyota Camry 2010–2013. Confirm OE number before purchase. Fit: Toyota Camry 2010–2013 models. Verify the OE number to ensure exact compatibility.

Read more less

The B-Shaped Clip Nut for Car and Motorcycle provides a reliable fastener to secure plastic body decorations to metal panels. It supports multiple screw bases with a universal fit, forming a stable link between trim parts and the vehicle body. Ideal for attaching trim panels, fenders, bumpers, and decorative hardware on cars and motorcycles. The clip profile helps keep alignment during handling and installation, reducing the chance of part movement. B-shaped clip nut design for secure panel attachment Materials: M4 stainless steel 304 (only M4); M5/M6/M8 manganese steel for other sizes Finishes: zinc plating with primary color and blue/white accents Sets include M4x10, M5x10, M6x10, M8x10 pieces (10 each, 40 total) Easy installation: snaps into trim holes and accepts standard screws Compatibility: suitable for automobile and motorcycle trim panels, fenders, bumpers Sizes include M4x10, M5x10, M6x10, M8x10; materials vary by size (M4 stainless steel 304; others manganese steel). Finish: blue and white zinc plating. Fit: Designed for common screw bases used in automotive and motorcycle body trim; verify screw size before use (M4–M8).

Read more less

This rear right exterior door handle replacement fits Kia Sorento 2011–2015. Made from ABS, it provides a durable, straightforward replacement for a damaged handle. Use it when the rear door handle is cracked, loose, or no longer aligns with the latch. It follows an OE-style design for a reliable exterior pull. Material: ABS for impact resistance and long service life. OE-compatible: includes handle 82651-2P010 and cap 83662-2P010 for a proper fit. Installation: designed for simple rear-right door replacement. Compatibility: Kia Sorento 2011–2015, rear-right exterior door handle. Included parts: replacement handle and cap; matches OEM dimensions for a seamless finish. Optional light specifications Material: ABS; OE numbers included; no additional hardware or lighting components are included. Fit: Kia Sorento 2011–2015, rear-right exterior door handle.

Read more less

This rear left outside door handle is designed for Kia Sportage models from 2005 to 2010. It uses ABS material for reliable performance and is intended as a direct replacement for a damaged or worn handle. When the exterior handle on the rear left door becomes loose, sticks, or breaks, this replacement restores access and maintains the vehicle's exterior appearance. Material: ABS for durability and impact resistance OE part number: 83651-1F0104 Installation location: rear left door Compatibility: Kia Sportage 2005–2010 Easy installation: simple swap using common tools Replacement purpose: replaces a damaged or worn handle Durability: designed for long service life Fit: Kia Sportage 2005–2010, rear left exterior door

Read more less

The Tailgate Cable with rubber-coated steel wire rope is a practical, direct replacement for select GM tailgates. This part is built for durability and straightforward installation. Replace a damaged or worn tailgate cable to restore reliable operation and reduce recurring tailgate issues. Material and coating: rubber-coated steel wire rope provides abrasion resistance and a long service life. OE compatibility: OE numbers 88980509 and 889805103 for easy identification. Installation location: tailgate mounting point, intended as a direct replacement. Durability: designed to withstand repeated opening and closing with minimal wear. Broad compatibility: fits multiple GM models from 1999–2007, including Silverado/Sierra, Avalanche, Escalade, GMC Sierra, and HUMMER H2. Replacement purpose: suitable for replacing damaged or aged tailgate cables to restore function. Specifications Material: rubber-coated steel wire rope. OE numbers: 88980509, 889805103. Installation location: tailgate. Fit: designed to fit tailgates on Cadillac Escalade (2002–2006), Chevrolet Avalanche (2002–2006), Silverado/Sierra (1999–2007 and Classic 2007), GMC Sierra (1999–2006 and Classic 2007), and HUMMER H2 (2003–2007).

Read more less

Right Side Air Intake Hose Replacement for Your Vehicle is a direct-fit part designed to restore the right-side air intake path on select Mercedes-Benz models. It uses durable polypropylene and is built for a long service life. Use this hose when the original right-side intake hose is cracked, collapsed, or leaking, which can affect engine airflow, idle stability, and overall efficiency. OE compatibility: OE number A2720902882; verify against your vehicle before purchase. Material and construction: polypropylene (PP) offers heat and chemical resistance for reliable service. Installation: direct replacement with minimal tools; designed for a straightforward swap. Vehicle compatibility: fits Mercedes-Benz GLK350 2010–2012 with 3.5L V6 (Base and 4Matic) air duct. Location: installs on the right side of the intake hose assembly. Notes: Please check OE number A2720902882 to confirm compatibility prior to purchase. Fit: Mercedes-Benz GLK350 2010–2012 Base and 4Matic with 3.5L V6, right-side intake hose.

Read more less

Grey 198x114 mm Rectangle Louvered Vent Panel Cover for RVs offers a practical replacement for damaged vent panels. Made from ABS with a precise fit and easy installation. Use this vent panel to upgrade RV, bus, or modified vehicle vents that require improved airflow and a secure cover. Material: ABS for durability and light weight Size and mounting: Outer dimensions 198 x 114 mm; screw hole spacing 175 mm and 92 mm; screw hole diameter M45 Color/finish: Grey louvered vent panel with a durable, low-sheen finish Compatibility: Fits RVs, buses, passenger cars, or other modified vehicles Replacement: Replaces damaged or old grille vent panels; straightforward install Optional light specifications: ABS construction with integrated louvers; color remains grey after installation; mounting hardware not included. Fit: Confirm opening measures 198x114 mm, with screw holes spaced at 175 mm and 92 mm and hole diameter M45 to ensure proper mounting.

Read more less