This Car Audio Power Adapter is designed for 12V vehicle use, providing a stable, dependable power source for car audio gear on the go. Use it to power head units and compact amplifiers in daily driving, road trips, or when upgrading your vehicle's audio setup, without dashboard fluctuations. Lightweight and ultra-compact design for easy placement 100% high quality and brand new construction Full power with synchronous rectification for efficient conversion (over 90%) Built-in protection: over/under-voltage input, overload, over-heat, and short circuit Auto-recovery after faults clear and normal operation resumes Stable, reliable performance under typical car electrical loads Easy and simple installation with minimal wiring Specifications (optional): 12V DC input from vehicle electrical system. Fit: Compatible with standard 12V car audio devices and installations.

Read more less

This Car Audio Microphone uses a 3.5mm plug and a 2.1 m cable to support reliable voice capture for in-car hands-free systems and external devices. It features a clip-based design for easy mounting and stable operation in moving vehicles. 3.5mm standard plug for plug-and-play setup 2.1 m length cable provides flexible routing and longer reach Electret condenser cartridge with high sensitivity, low impedance, anti-noise, and anti-jamming performance Microphone can be detached from the clip for optimal sound in various seating positions A-shaped fixing clip offers secure, easy installation Fast, accurate data transmission helps keep voice clear and stable in driving environments Specifications: 2.1 m cable; 3.5 mm plug; electret condenser microphone; compatible with devices that accept a mic input Fit: Designed to clip to a visor or dashboard for stable positioning and reliable use

Read more less

This car DC power step-down transformer converts a 24V vehicle supply to a stable 12V output for compatible accessories. It delivers up to 10A, supporting up to 120W of load. Use it to power 12V devices from a 24V system in trucks, vans, or commercial vehicles, such as dash cams, small refrigerators, or LED lighting. Input/output specs: 24V DC in, 12V DC out, max 10A (≈120W). Construction: Aluminum alloy housing for durability and heat dissipation. Protection: Built-in overheating and overcurrent protection for safe operation. Size and weight: 112 x 72 x 43 mm; 181 g. Installation: Compact form factor supports easy mounting in vehicle compartments. Compatibility: Suitable for 24V automotive electrical systems powering 12V accessories. Specifications: Input 24V DC, Output 12V DC, rated current 10A, housing material aluminum alloy. Fit: Designed to work with 24V vehicle power setups and 12V devices up to 120W; ensure total load does not exceed 120W.

Read more less

Convert 24V vehicle power to a stable 12V supply with this DC 24V to 12V car power step-down transformer. It provides up to 20A of continuous output. Ideal for 24V vehicle systems such as commercial trucks, fleet vans, or caravans to power 12V accessories like LED lighting, dash cameras, and portable fridges. Input: 24V DC; Output: 12V DC; Max current: 20A. Aluminum alloy housing for durable, lightweight construction. Overheat protection and over-current protection for safe operation. Compact footprint: 112 mm x 110 mm x 43 mm; weight 299 g. Broad compatibility with 12V devices and automotive accessories. Key specs: Input 24V DC, Output 12V DC, Max current 20A, Case material: aluminum alloy, Dimensions 112 × 110 × 43 mm, Weight 299 g. Fit: Suitable for 24V vehicle electrical systems requiring a 12V output for accessories.

Read more less

This compact Rowing Boat Valve Adapter provides a universal valve connection for inflatable boats. Use it with a standard hand pump or a vehicle electric pump, avoiding paddle-specific fittings and enabling quick, reliable inflation. Material: brass, rubber, PA66 for durable, corrosion-resistant construction Dimensions: 7.8 x 3.5 cm; Weight: 38 g Compatibility: accepts standard pumps and car air pumps; adapts paddle plate interface to universal connection Design: switches from paddle-specific inflation interface to a common pump thread Portability: small form factor for easy carrying and storage Installation: attaches to inflatable boat valves quickly; no tools required Specifications: 7.8 × 3.5 cm; 38 g; Materials: brass, rubber, PA66. Fit: Compatible with inflatable rowing boats that use standard air valves and with most handheld or vehicle pumps.

Read more less

Aux Audio Cable for BMW E46 (1999–2006) offers a simple link between portable audio devices and your car stereo. Made from ABS, the 1.5 m cable weighs about 40 g and uses a USB PC interface for compatibility with supported devices. Use it for everyday drives to play music or podcasts from a phone, USB stick, or other compatible source through the factory head unit. It provides a stable connection for consistent playback during commutes or road trips. Convenient connection with plug‑and‑play setup Simple installation without tools or adapters Stable transmission for clear audio during drive Broad compatibility with E46 models and listed variants Durable ABS housing designed for in‑car use Specifications: Length 1.5 m; Weight ~40 g; Material ABS; Interface: USB PC. Fit: Designed for 1999–2006 BMW E46 sedans, coupes, and convertibles, including 320i, 320ci, 323i, 325i, 328i, 330i, and M3 variants.

Read more less

This Car Reversing Radar Sensor is a dedicated rear parking aid for BMW 5 Series, specifically the E60/E61 (pre-facelift) models built 2003–2007. Use it to help detect obstacles when reversing in tight spaces, garages, or crowded parking lots, aiding safer maneuvering. Material: ABS plastic for durable, impact-resistant construction. OE compatibility: 662069891744; fits BMW 5 Series E60/E61 (Vorfacelift), 2003–2007. Compact dimensions: 8 x 5 x 3.5 cm and 40 g weight keep a discreet bumper profile. Direct replacement for the original rear bumper sensor in the specified mounting hole and connector location. Designed to work with the standard BMW wiring for this sensor, minimizing compatibility issues. Specifications: Material: ABS plastic; Weight: 40 g; Size: 8x5x3.5 cm; OE: 662069891744. Fit: BMW 5 Series E60/E61 (Vorfacelift), 2003–2007.

Read more less

Car Voltage Converter Controller for Mercedes Benz is a purpose-built power interface designed to support extra 12V accessories while preserving the factory electrical system. Designed for owners adding dash cams, USB chargers, GPS units, or heated-seat modules in compatible models, this controller aims to prevent voltage fluctuations from affecting the vehicle’s computer. C-BUS smart chip provides reliable Mercedes compatibility. Reduces interference with the car’s ECU and sensors. Plug-and-play design with automatic patching for SMT and through-hole parts. Rugged ABS housing for dash or under-seat mounting. Compact size; dimensions 16.5 x 13.5 x 5.8 cm; weight ~250 g. Operates on 12V systems with up to 3.6A current draw. Specifications: 12V input, 3.6A current, ABS plastic housing, size 16.5 x 13.5 x 5.8 cm, weight ~250 g. Fit: Compatible with Mercedes-Benz W205 C-class (2014–2018), W213 E-class (2017–2018), W222 S-class (2013–2018), CLS, GLC and related variants.

Read more less

The Car 6-Way Insurance Junction Box with a Durable Nylon Shell offers a compact, insulated solution for organizing electrical connections in 48V systems. Ideal for use in cars, yachts, and RVs, it helps distribute power safely while protecting wires from moisture, dust, and accidental contact. 6‑way distribution with an insert‑type design for straightforward wiring Nylon shell provides insulation and robust protection against impact Electrical ratings: 48V working voltage, 100A current, 40A holding current Compact size ≈ 15.5 cm x 8.2 cm and weight ≈ 250 g for easy mounting Broad compatibility with 48V automotive, marine, and recreational electrical setups Easy installation with accessible terminals and durable construction Specifications: 48V system, 100A current, 40A holding current; size about 15.5 × 8.2 cm; weight about 250 g; insert-type, nylon shell. Fit: Compatible with 48V electrical installations in cars, yachts, and RVs.

Read more less

This Anderson Plug Car Battery Connector Set for Charging offers a compact, durable interface for 12–24V charging systems in vehicles and equipment. Use it to connect portable chargers, battery maintainers, or solar controllers to cars, trucks, boats, or other 12–24V DC power setups. Material and safety: flame-retardant PC housing with high-temperature resistance for dependable operation. Electrical specs: 12–24V input and 12–24V output, with up to 5 A output current. Durability: anti-corrosion design and robust construction for outdoor or workshop use. Size and weight: compact form at about 6 x 4.3 x 4.9 cm and roughly 31.8 g. Compatibility: designed for standard Anderson-style charging connectors and 12–24V DC systems. Fit: Integrates with standard 12–24V DC charging configurations that use Anderson-style connectors.

Read more less

Andersen offers a compact 12V USB car lighter panel designed for reliable vehicle charging. Use it in cars, trucks, or RVs to power phones, GPS devices, or other USB-powered accessories while on the road. Flame-retardant polycarbonate panel with high-temperature resistance and anti-corrosion properties. Input voltage 12–24V; output voltage 12–24V; USB output up to 4.8A. Compact size: about 8 x 6 x 5.2 cm; weight around 63.6 g. Includes panel, terminals, and mounting screws for straightforward installation. Keeps cables organized and reduces exposed wiring inside the cabin. Designed for use with 12V and 24V vehicle electrical systems. Specifications: Material: polycarbonate (PC); USB output up to 4.8A; Size: 8 x 6 x 5.2 cm; Weight: 63.6 g; Input/Output range: 12–24V. Fit: Compatible with most vehicles that supply 12V or 24V power, and with dashboards or panels designed to accommodate USB charging modules.

Read more less

This is a stainless steel oxygen sensor adapter with an extended joint, designed for car O2 sensor installations. It provides reliable threading and a durable build for common repair scenarios. Use this adapter when sensor clearance is tight, or you need to relocate a sensor to accommodate wiring, heat shields, or exhaust routing during repairs. It’s suitable for universal applications across many models. Material: stainless steel, corrosion resistant Thread: M18x1.53 Length: ~35 mm Weight: ~33 g per piece Compatibility: universal fit for many O2 sensor installations Pack: 2 pieces SpecificationsFinish: metallic stainless steel; color-balanced look for most engine bays. Fit Designed for oxygen sensors with M18x1.53 threads; compatible across a range of passenger cars and light trucks.

Read more less

Car AUX USB Extension Cable for car audio extends USB data transfer and charging to your vehicle. It combines a USB lead with a 3.5 mm AUX connector, using a copper-core conductor for durability in 12V systems. Use this extension to upgrade OEM head units, route USB-AUX connections to a dash or center console, or power portable audio devices. It fits vehicles with both USB and 3.5 mm AUX inputs. USB port supports high-speed data transfer and device charging Lead wire includes USB and 3.5 mm AUX plugs for straightforward connections Copper-core conductor enhances signal integrity and longevity 12V-compatible design for typical car audio systems Compatible with vehicles that have USB and 3.5 mm AUX inputs Cable length about 1.5 m; installation hole about 30 x 17 mm Optional light specifications There are no built-in lighting features in this extension cable. Fit: Works with vehicles that have USB and 3.5 mm AUX inputs; ensure dash openings accommodate a cable up to about 1.5 m long and a hole around 30 x 17 mm.

Read more less

MAXI2 Car Audio Fuse Seat Waterproof Power Cord is a compact, fuse-protected power connector for automotive installs. The brass body provides reliable conductivity, and a high-temperature shell resists engine-bay heat. Ideal for powering car audio, dash cams, or other accessories from a protected supply. It includes two 30A fuses for circuit protection. Brass body ensures solid conductivity Two 30A fuses included High-temperature shell resists engine heat Waterproof silicone sleeve seals moisture Dimensions: 66.5 × 41 × 32 mm; 63.5 g Specifications: Material — Brass; Fuses — two 30A; Size — 66.5 × 41 × 32 mm; Weight — 63.5 g; Sleeve — soft silicone; Waterproof design for under-hood use. Fit: Designed for standard fuse-seat mounting in car audio and other accessories. Verify the mounting space accommodates the 66.5 mm length and 32 mm height.

Read more less

This yacht cup holder is crafted from 304 stainless steel for dependable, corrosion-resistant use on boats and RVs. Precision casting and a polished finish deliver a clean, low-maintenance accessory for deckside beverages. Designed for installation on boat decks and RV interiors, it secures cups during travel or at anchor without obstructing movement. Material: 304 stainless steel with precision casting Corrosion resistance: in marine environments Finish: polished surface that resists staining and eases cleaning Installation: easy direct surface mounting Applications: suitable for yachts and RV modifications Compatibility: holds standard cup sizes and beverage containers Specifications: Material: 304 stainless steel; Finish: bright polished; Color: natural metal; Mounting: direct installation. Fit: Designed to hold standard beverage cups securely on boat decks, with a compact footprint to minimize deck clutter.

Read more less

This electric fuel pump is designed for Mercury Mercruiser carbureted engines, providing reliable fuel delivery for marine applications. Ideal as a direct replacement when the original pump shows signs of failure such as hard starting, inconsistent fuel pressure, or odd engine performance. Premium copper and reinforced plastic construction for durable fuel delivery in marine environments. Dimensions: 15.7 cm long, 4.03 cm wide, designed to fit standard Mercruiser mounting setups. Compatibility: fits Mercruiser carbureted engines including 4.3, 5.0, 5.7, and 496. OE reference: 807949A1 for cross-check and replacement accuracy. Easy installation and operation: intended as a direct replacement with familiar mounting points and wiring. Durable and reliable: built to withstand engine vibrations and marine conditions as a replacement part. Light specifications: Copper and plastic construction, compact design suitable for standard installations. Fit: Direct replacement for Mercruiser carbureted engines listed above; verify OE 807949A1 reference for compatibility.

Read more less

Yamaha Starter Relay Solenoid Kit with Fuses for motorcycles provides a direct replacement for the starter circuit, including a copper relay and protective fuses. Ideal for maintenance and field repairs, this kit restores proper starter operation on multiple Yamaha models and ATV applications listed in the product notes. It’s designed to work as a straightforward swap for the failed relay and blown fuses, reducing downtime. Direct replacement starter relay solenoid Copper contact for reliable electrical conduction Includes two 30A fuses for circuit protection Compact enclosure: 4.5 x 5.2 x 3.5 cm Kit includes 1 starter relay and 2 fuses Broad compatibility with the listed model numbers and ATV applications SpecificationsMaterial: Copper; Size: 4.5 x 5.2 x 3.5 cm; Color: Copper tone; Fuses: 2 x 30A Fit: Direct replacement for the listed models when installing this starter relay kit.

Read more less

This ATV Starter Solenoid Relay Kit provides a compact, reliable replacement for Yamaha starting circuits. It’s suited for maintenance or replacing a failing start relay to restore dependable starting on compatible Yamaha ATVs. Kit includes 1 starter relay and 2 x 30A fuses for immediate use. Copper contacts deliver solid electrical conductivity and long-term durability. Compact dimensions: 4.5 x 5.2 x 3.5 cm, designed to fit tight starter areas. OEM compatibility includes references such as 4SV-81940-00, 4YR-81940-02, 4XE-81940-12 and related numbers. Plug-and-play wiring with standard connectors minimizes wiring work. Size: 4.5 x 5.2 x 3.5 cm • Material: Copper • Fuses: 2 x 30A included. Fit: Direct replacement for Yamaha start relays on listed YFM and related models using the OEM references above.

Read more less

Durable fuel pressure sensor with ABS+metal construction for Dodge Cummins engines. It resists corrosion and aging to extend service life. Used as a direct replacement for a worn or faulty sensor, it helps maintain accurate fuel pressure readings and supports reliable starting and engine performance under normal driving and towing conditions. Durable ABS+metal construction resists corrosion and aging for longer service life. OE reference GN49214973 ensures proper fit and electrical compatibility with Dodge Cummins systems. 35-terminal design provides a robust electrical connection and signal integrity. Easy installation as a straightforward swap for the old sensor with compatible harness and mounting. Direct replacement for Dodge Cummins engines; designed to match the original wiring and interface. Designed for plug-and-play with common Dodge Cummins harnesses for quick fitting. Specifications: Material: ABS+metal; OE number GN49214973; terminals: 35. Fit: Direct replacement for Dodge Cummins engines that require GN49214973 sensor.

Read more less

This MC4 to Anderson battery charging cable is designed for mobile energy storage systems that use MC4 solar connectors on one end and Anderson 30A power contacts on the other. It provides a reliable link for portable battery packs in compact setups. Common use is charging or replenishing portable energy stores from solar arrays or other DC sources, where a 1.0 m run is needed to keep cables tidy and organized. Connection types: MC4 2-pin on the MC4 end and Anderson 30A on the opposite end Conductor material: pure copper with 3.31 mm² cross-section (approx. AWG 12) Insulation and sheath: environmentally friendly PVC with 0.8 mm insulation thickness Electrical ratings: 36 V nominal, 30 A current, up to 360 W Length and weight: 1.0 m long; about 107 g; 2x12 AWG Compatibility: suitable for 30A Anderson‑compatible mobile energy storage equipment Key specs: length 1.0 m, copper conductors, PVC insulation and sheath, 36 V, 30 A, 360 W. Fit: Designed to fit devices using 30A Anderson connections for mobile energy storage systems.

Read more less

Designed for everyday driving, this brake pedal combines metal construction with practical features to support safer braking. The anti-skid surface and enlarged pedal area are designed to improve grip and control during routine stops. Ideal for daily commuting and city trips, the pedal's durable metal build withstands regular use, while the textured surface helps maintain foot traction in wet or slick conditions. The enlarged pedal area provides more surface contact for confident braking. Material: metal construction for durability Anti-skid, textured surface for reliable grip Enlarged pedal area increases contact and control Exquisite workmanship with a unique design Designed for standard car brake pedal installations Specifications: Material - metal; Finish - anti-skid surface; Pedal area enlarged for improved control. Fit: Designed to fit typical car brake pedal assemblies found in many passenger vehicles.

Read more less

The Universal Car Plastic Fasteners Rivet Clips Set includes 100 plastic clips designed to replace worn or damaged fasteners on various vehicle surfaces. Made from durable plastic, these universal clips are intended for use on license plates, fenders, bumpers, interior panels, doors, and other car surfaces. They offer a practical, no-fuss solution for reattaching trim components. Use-case: Ideal for DIY repairs when replacing lost clips during panel removal or trim reattachment, ensuring surfaces stay secure without gaps. 100 pieces included Universal plastic rivet clips for cars Suitable for license plates, fenders, bumpers, interior panels, and doors Durable plastic construction with long service life Lightweight and corrosion resistant Specifications: Plastic material; 100 pieces; universal type. Fit: Universal type designed to fit many car models; verify the original fastener size to ensure compatibility.

Read more less

Direct replacement glove box handle switch for Mercedes-Benz CLS-class models. This part is designed for plug‑and‑play installation with no cutting or splicing required, helping restore the original feel of the glove box operation. Ideal when the existing switch is worn, cracked, or unresponsive, allowing you to open and close the glove box reliably while maintaining the vehicle's interior appearance. Direct replacement for CLS-class glove box handle switch Easy installation; no modification needed Preinstalled connector; no cutting or splicing Durable ABS + PC construction Size: 120 x 50 mm; Weight: 47.5 g Compatibility: Mercedes-Benz CLS-class models Material features: ABS and PC offer a sturdy, lightweight component with a consistent finish suitable for typical interior trim tones. Fit: Specifically shaped for the glove box area in CLS-class interiors. Verify model year compatibility to ensure proper fit.

Read more less

Replace the right rear platform cover on BMW 3 Series E93 with this direct-fit replacement. It mirrors the OEM design for a balanced, functional cargo area. Ideal after cargo loading or trim damage, providing a solid, stable surface for mats and gear. The part aligns with factory mounting and maintains even edge lines across the platform. Direct replacement for the right rear platform cover on BMW 3 Series E93 ABS plastic with aluminum alloy reinforcement for durability and lighter weight Original-position design with reinforced gear to resist breakage Simple, tool-light installation using existing mounting points Maintains OEM-like fit and finish in the cargo area Lightweight design aids handling during installation. Fit: BMW 3 Series E93 models (convertible).

Read more less