Auto Replacement Parts

This Car Battery Inverter Cable with a 50 cm copper conductor is designed for reliable power connections in automotive and off-grid setups. Tin-coated lugs resist corrosion and a closed-end design adds durability in exposed engine compartments. Use this cable to connect a battery to an inverter, charger, or power distribution point in cars, trucks, boats, solar energy systems, or ATVs. The PVC+Copper construction, polyolefin heat shrink, and insulating wrap help maintain stable electrical performance across temperature changes. Copper conductor with tin-coated lugs for corrosion resistance Closed-end lug design protects against moisture and corrosion Polyolefin heat shrink tubing forms a tight protective seal Insulated with high-quality material to maintain stable conductivity Length: 50 cm; temperature range -40 to +125 C; material: PVC + copper Compatible with car, truck, ship, battery systems, solar energy, ATV setups Fit: Compatible with standard automotive battery terminals and common inverter inputs.

Read more less

The RV Power Distribution Terminal Block With Cover M8 and M10 Studs is a compact, 48V DC power distribution hub designed to organize and protect wiring in vehicles and boats. It consolidates multiple feeds into a single block, helping cable management in engine bays, cabins, and compartments. M8 and M10 stud connections; 62.5A per stud; total 250A rating ABS body with zinc alloy hardware and brass terminals; protective cover included 48V DC maximum operating voltage; suitable for automotive, RV, and marine power systems Auxiliary terminal screw rated at 20A for easy branching Designed to organize wiring harnesses and shield terminals from dust and moisture Light specifications (optional): Details provided focus on materials and electrical ratings; no additional lighting features. Fit: Compatible with M8 and M10 stud connections; applicable to 48V power distribution in cars, campers, boats, and yachts.

Read more less

9x13 cm car engine oil pan heater pad provides targeted warmth for cold-weather operation. It can heat engine oil pans, fuel tanks, water tanks, and batteries to help prevent freezing during start-up. Ideal for winter storage or long trips in cold climates. The pad features a double-faced adhesive backing for easy mounting on flat or slightly curved surfaces, enabling close contact for efficient heat transfer. Size and form: 9 x 13 cm, thin silicone heating plate Voltage and power: 220 V, 150 W Materials: nickel-chromium heating wire with silicone rubber insulation Waterproof construction and uniform, fast heating Adhesive-backed installation for quick mounting on oil pans, tanks, or batteries Flexible design that conforms to surface for effective heat transfer Specifications: 220 V, 150 W; size 9 x 13 cm; built with nickel-chromium alloy heating wire and silicone rubber insulation cloth; waterproof and lightweight. Fit: thin, flexible pad that sits flush on flat or gently curved surfaces for close contact.

Read more less

The Car Engine Oil Pan Heater Pad is a 15 x 20 cm heating solution designed for cold weather operation on automotive tanks and pans. It provides anti-freeze, heating, and insulation for oil pans, fuel tanks, water tanks, and batteries, helping retain heat where it's needed most. Size and power: 15 x 20 cm surface pad with 220V 150W or 12V 80W options. Material: nickel-chromium heating wire bonded to silicone rubber insulation for a thin, lightweight, flexible plate. Adhesive backing: double-faced tape enables simple, tool-free installation on flat surfaces. Performance: waterproof construction, rapid heating, uniform temperature, and high thermal efficiency. Contact and heat transfer: conforms closely to the heated object for effective heat transfer. Compatibility: designed for engine oil pans, fuel tanks, water tanks, and batteries in typical cars. Optional specifications: Voltage options include 220V 150W and 12V 80W; size remains 15 x 20 cm; includes double-faced adhesive backing. Fit: 15 x 20 cm pad that adheres to flat engine pans or tanks with the provided tape for close contact.

Read more less

The Car Fuel Check Valve One Way for 6-12mm Fuel Lines is a compact aluminum valve designed for carburetor and low-pressure fuel systems. It prevents backflow and helps maintain steady fuel flow along the line. Use this inline valve in fuel lines to keep fuel from returning to the tank, a practical solution for small engines and carburetor-fed setups where simple, reliable inline flow control is needed. One-way check valve to prevent fuel backflow and maintain pressure in the line Fits 6–12 mm fuel lines and is suitable for carburetor and low-pressure systems Compatible with water, gasoline, diesel, engine oil and other fluids Aluminum body provides light weight and corrosion resistance Easy installation and replacement with straightforward orientation for inline mounting Light specifications (optional): Material: aluminum; suitable for 6–12 mm hoses. Fit: Suitable for inline installation in 6–12 mm fuel lines used by carburetors and low-pressure fuel systems.

Read more less

Flexible 1.5m Shower Pipe is a durable ABS connector designed for bathroom use. It provides a straightforward replacement for a damaged or worn shower pipe and supports a handheld shower head. Use this hose to restore a leaky shower setup, route water around tight spaces, or upgrade an aging installation. It connects between the wall outlet and the handheld head, with simple, tool-free assembly. Length: 1.5 meters Material: ABS plastic for durability and corrosion resistance Flexible design: bends to fit around fixtures and corners Easy installation: standard fittings with hand-tightening Compatibility: works with most handheld shower heads and wall-mount connectors Maintenance: easy to clean; resists mineral buildup Specifications: Material ABS; Length 1.5 m; Connection type: standard shower fittings. Fit: Suitable for most domestic showers using handheld heads, bridging the gap from wall outlet to shower head.

Read more less

The 12V Automotive Ignition Timing Light Xenon Strobe Tester helps you accurately illuminate timing marks on 12V ignition systems. Designed for automotive, agricultural, and marine engines, it attaches to the high-voltage lead and uses a xenon strobe to illuminate timing marks for precise checks. 12V operation with red positive and black negative power leads. Induction clamp fits the high-voltage lead and triggers outside No.1 spark plug coil. 100 mm induction size offers flexible positioning around the engine bay. High-brightness xenon lamp with a focusing lens for clear timing marks. Speed range 200–10,000 rpm supports a broad range of engines. Shock-resistant ABS housing with ergonomic handle for comfortable use. Light specifications: high-brightness xenon lamp and focusing lens provide consistent illumination, helping visibility in dim engine bays. Fit: Compatible with most 12V ignition systems used in cars, agricultural, and marine engines; clamps onto the cylinder No. 1 high-voltage line.

Read more less

Car Exhaust Hanger Rubber Insulator for Secure Mounting provides a practical mounting solution for your exhaust system. Made from a high-density rubber compound, it resists high temperatures and avoids abrasive contact with nearby components. This insulator is a straightforward replacement for worn or broken mounts, helping secure the exhaust and reduce unwanted movement during operation. Material: high-density rubber compound that is non-abrasive and designed to resist high temperatures Durability: engineered for long life under continuous engine and road heat Easy installation: remove the old rubber, clean the area, apply silicone lubricant to retaining ends, then mount the new insulator Function: serves as the connecting point between the exhaust pipe bracket, muffler, and chassis hanger Compatibility: designed for standard exhaust hanger assemblies found on many passenger vehicles Maintenance: periodically inspect for wear or cracks and replace as needed Specifications: Material: rubber; Temperature resistance: suitable for typical under-vehicle heat. No additional hardware required beyond the mounting components. Fit: Compatible with common exhaust hanger setups; verify fit with your vehicle's exhaust system before use.

Read more less

Universal Car Air Intake Rubber Connector (63mm–76mm) provides a flexible link between intake tubes with outside diameters from 63 mm to 76 mm. Made from high-quality rubber for durability and smooth airflow in DIY setups. Use cases: Ideal for DIY custom air intakes, between a mass air sensor housing and throttle body, or between connected intake pipes on compatible vehicles. Not recommended for high-boost or high-temperature applications. Material: high-quality rubber for flexibility and durability Diameter range: 76 mm to 63 mm outer diameter (63–76 mm) Compatibility: fits tubes with 2.5" (63 mm) or 3" (76 mm) outside diameter Designed for DIY intakes and straightforward installation Universal fit for many cars Flexible, durable design for simple routing Fit: Universal; verify tube outer diameter before purchase.

Read more less

This rubber dust cover for the car steering ball offers a practical, installation-friendly solution. It uses a tongue-and-groove fastening system, with no dismantling required for fitment. Use this cover to protect the steering ball area from dust, moisture, and routine wear during daily driving or maintenance. Tongue and groove fastening system for a precise, secure fit No dismantling required, reducing time and effort Durable rubber construction resists wear and environmental exposure Size: 95 x 130 mm matches standard steering ball dust covers Protects the steering ball joint from dust, moisture, and grime Light specifications: Size 95 × 130 mm; material rubber. Fit: Designed to fit steering ball dust covers with dimensions 95 x 130 mm. Check your part measurements before installation.

Read more less

The Volkswagen Golf 6 Right Side Door Inside Handle Cover is a durable interior trim replacement for the right-side door handle area. It is made from PC material to reproduce the factory texture and keep the cabin looking integrated. Suitable for replacing worn or scratched interior trim after maintenance or cosmetic repairs. It offers a straightforward, direct-fit option that preserves the original look of the door panel. The cover helps maintain a cohesive cabin appearance during partial repairs. Material: PC plastic, scratch- and wear-resistant Compatibility: OE numbers 5K4 868 039 A and 5K4 868 040 A Design: Reproduces the original car texture for authentic appearance Installation: Direct replacement on the right-side door handle area Finish: Matches typical Golf 6 interior finishes Fit: Specifically for Volkswagen Golf 6, interior right-door-handle location.

Read more less

Replace the VW Golf left interior door handle cover with this PC-made replacement. It’s designed to restore the original look and provide a secure, clean fitting that matches the cabin interior. When the existing handle cover is scratched, worn, or loose, this replacement offers a straightforward refresh. The part preserves the interior texture, helping your car’s interior feel cohesive without major modifications. Material: PC; scratch- and wear-resistant for durable use Installation: simple, tool-free replacement for the left interior door handle Appearance: preserves OEM interior texture and color alignment Compatibility: fits VW Golf left door handle with OE 5K4 868 039 A / 040 A Fitment: aligns with original mounting points for a secure snap-in Durability: designed to withstand daily handling with minimal wear Fit: Left interior door handle cover for VW Golf; compatible with OE numbers 5K4 868 039 A and 5K4 868 040 A.

Read more less

Replace a worn or damaged interior door handle with this Ford Ranger Door Inner Handle Pair. Made from durable plastic with an electroplated finish for a clean, low-maintenance appearance. This pair is a practical solution when the original inner handles break, wear out, or become difficult to operate. It installs in the inner door handle location to restore smooth, reliable operation during daily use. Direct replacement for damaged or worn inner door handles Durable plastic with an electroplated finish for corrosion resistance and easy cleaning OE references AB3921971AB, AB3921970AB for compatibility verification Fits Mazda BT-50 (2012–2019), Ford Ranger T6 (2012–2019), and Ford Everest (2015–2019) Includes a pair to cover both doors for simple installation Light specifications: Material – plastic; Finish – electroplating. Fit: Designed to mount in the inner door handle location on Ford Ranger T6 2012–2019, Mazda BT-50 2012–2019, and Ford Everest 2015–2019; OE numbers AB3921971AB and AB3921970AB.

Read more less

Replace a worn or broken inside door handle on your Suzuki Vitara with this left front replacement. It’s designed to mirror OEM form and function, providing a straightforward repair that preserves interior feel and operation. When the interior handle sticks, wobbles, or stops releasing the latch, this replacement helps restore reliable daily use without removing the door panel. Complete left front interior door handle replacement OE-style part number 8313056B01 for direct fit Materials: ABS and PC resist wear and weather exposure No cutting or splicing required; plug-and-play connector Lightweight design at 77 g; front-door placement Simple DIY install—no specialized tools needed Fits Suzuki Vitara models 1988–1999 Specifications: OE 8313056B01; Weight 77 g; Material: ABS and PC; Placement: front Fits left front door on Suzuki Vitara 1988–1999.

Read more less

This interior door handle provides a complete replacement for the right-front door on Suzuki Vitara models from 1988–1999. It restores interior pull function and grip feel after panel removal, helping you re-enter the vehicle smoothly. Complete interior door handle replacement for the right-front door on Suzuki Vitara (1988–1999). Constructed from ABS and PC plastics with metal components for durability in all weather. No cutting or splicing required; uses the existing interior connector for plug-and-play install. Easy, tool-light installation with minimal dashboard disassembly. OE reference 8311056B01; weight 77 g; front-door placement. Compatibility: Suzuki Vitara 1988–1999; designed to align with factory mounting. Specifications: OE 8311056B01 • Weight 77 g • Material: plastic and metal • Placement on vehicle: front interior • Fits: Suzuki Vitara 1988–1999 Fit: Right-front interior door handle for Suzuki Vitara (1988–1999); aligns with factory mounting and interior linkage.

Read more less

This clock spring replacement for Toyota steering wheels is a plastic, lightweight unit designed to restore control after wear. It adheres to original-standard design for reliable fit and electrical continuity. Ideal for DIY repairs or shop service when steering controls fail or the airbag warning light appears. It provides a straightforward replacement that preserves steering-wheel functionality and cabling integrity. OE reference: 84306-0D070—confirm this matches your vehicle's original part. Material: Plastic; lightweight and durable construction. Easy installation; designed for direct replacement with common tools. Compatibility: fits Toyota Auris (from 2007), Aygo (from 2005) and Aygo II (from 2014), Corolla (from 2008), and Yaris (from 2005 and 2011). Original-standard replacement for a worn or damaged clock spring. Lightweight construction: Plastic design keeps weight low while maintaining durability. Fit: Direct replacement for the listed Toyota models; please verify the OE number before purchasing.

Read more less

Protective air outlet cover for car air intake under the seat helps prevent debris from entering the ventilation path. It mirrors the original outlet design for Model 3 and Model Y and installs discreetly beneath the seat. Ideal for daily driving in dusty environments or homes with pets. It reduces dust and hair reaching the under-seat intake while preserving airflow. Material and safety — ABS polymer; automotive-safe, odor-free. Sizes and weights — Model 3 buckle 20.5×6×0.5 cm (43 g); Model 3 bar 20.5×6.5×0.5 cm (38 g); Model Y buckle 20.5×6.5×0.5 cm (48 g); Model Y bar 21×6.3×0.8 cm (52 g). Installation options — Buckle or glue for secure mounting. Design and protection — Aligns with original outlet to help reduce clogging. Placement — Intended for under-seat installation in the vehicle interior. Optional light specifications: Not provided. Fit — Compatible with Model 3 and Model Y air outlets under the seat; precise fit depends on the outlet configuration.

Read more less

Bombardier replacement ignition switch for marine outboards provides a direct, plug‑in replacement for worn or damaged helm switches. Ideal for repairing or upgrading ignition on outboard engines that use OE 176408, this switch ships with two keys for operation. Material: ABS plastic body designed for durability in marine environments OE compatibility: matches part number 176408 for precise replacement Includes: ignition switch assembly plus two keys Keyed ignition: two keys included for easy access and back‑up Installation: designed for straightforward swap into the existing dash switch Compatibility scope: suitable for outboard models that use this ignition configuration Specifications: Material: ABS; OE: 176408; Includes: 1 ignition switch assembly, 2 keys. Fit: Compatible with outboard engines that require OE 176408 ignition switches.

Read more less

The Mercury Outboard Ignition Key Switch provides a practical replacement for starting Mercury outboard engines. Built from ABS plastic, it offers durable, weather-resistant performance for regular marine use. Use it as a maintenance replacement or spare to reduce downtime when the original switch wears or fails. The two included keys ensure quick access without carrying multiple remotes. OE compatibility: Mercury outboard ignition switch with OE number 17009A2 Material: ABS plastic for durability in marine environments Includes: ignition switch assembly and two keys Replacement use: suitable for replacing worn or failing ignition switches on Mercury outboards Installation note: verify wiring and mounting compatibility with your model Operational: standard ignition functionality to start and stop the engine Fit: Mercury outboard engines that use the OE 17009A2 ignition switch.

Read more less

The Mercury Outboard Ignition Key Switch with Two Keys is a direct replacement part built for durable marine use. Constructed from ABS plastic, it offers reliable performance in variable conditions and a long service life. Use this switch to replace a worn or lost ignition switch on Mercury outboards that use OE 17009A5. The kit includes one ignition switch assembly and two keys, ready for installation. Durable ABS plastic construction suitable for marine environments Direct replacement for Mercury outboard ignition switches with OE 17009A5 Includes one ignition switch assembly and two keys Standard wiring interface compatible with common Mercury control panels Designed for reliable starting and basic safety in everyday use Specifications Material: ABS plastic • OE compatibility: 17009A5 • Package contents: 1 switch assembly, 2 keys FitCompatible with Mercury outboard models that use OE 17009A5 ignition switches. Verify your engine part number before ordering.

Read more less

Outboard Vertical Control Box Tilt Lift Switch Replacement provides a direct, durable swap for worn tilt lift switches in outboard control boxes. Built for reliable, long-term service, it matches standard dimensions for simple installation. Designed for marine outboard installations, this replacement restores manual tilt and lift control without modifying the control box. It offers a practical option to revive an aging system. Direct replacement for old or broken tilt lift switch (OE: 858679T26) Material: ABS with high elasticity and toughness Easy installation with no extra adjustment required Precise fit for common outboard vertical control boxes Exquisite workmanship and dependable operation Compatibility with control boxes that use OE 858679T26 Light specs: Not applicable. Fit: Designed to fit outboard vertical control boxes using the OE tilt lift switch 858679T26.

Read more less

Direct replacement steering angle sensor for 2014–2017 Toyota Corolla and 2015–2017 Toyota Camry. It is manufactured from durable plastic for light weight and long-term use, designed to restore accurate steering angle readings without altering other systems. Use this sensor when diagnostic codes indicate steering angle or stability control issues, or when steering input appears inconsistent. The part aligns with OE specifications and listed OE numbers to ensure proper fit and function on the specified models. Material: plastic; lightweight yet durable. Direct replacement for listed OE numbers: 89245-02080, 89245-0K020, 89245-06020. Compatibility: 2014–2017 Corolla and 2015–2017 Camry. Simple installation with standard tools; no vehicle modification required. Helps provide accurate steering angle data to ESP/ABS systems. Optional specifications: Plastic construction helps keep weight down and maintains overall steering system balance. Fit: 2014–2017 Corolla and 2015–2017 Camry with OE numbers 89245-02080, 89245-0K020, or 89245-06020.

Read more less

Designed as a direct replacement tilt switch for Suzuki outboard control boxes. It provides a straightforward option for replacing an aging or malfunctioning tilt switch. Ideal for boat owners performing routine maintenance or mid-season repairs. Restores tilt-switch control so you can monitor engine angle reliably without complex wiring or modifications. OE part number 37850-93J106 for direct compatibility with Suzuki control boxes and assemblies ABS material provides durable, weather-resistant construction suitable for saltwater environments High elasticity and toughness support long-term tilt sensing under vibration Easy installation with no extra adjustments required and clear alignment cues Exquisite workmanship enables straightforward assembly and disassembly with minimal effort Direct replacement—no rewiring or modifications needed, compatible with standard control box layouts Material: ABS. OE: 37850-93J106. Fit: Direct replacement for Suzuki outboard control box tilt switch with OE 37850-93J106.

Read more less

Yamaha Outboard 10 Pin Control Box Extension Cable provides a longer, plug-and-play wiring solution for Yamaha's 10-pin remote systems. It is designed for clean routing at the helm and reliable connector performance. Use this extension when the control box must reach a distant helm position or when routing through tight cabin spaces. Length: 5.2 m (16 ft); extends the control wiring to accommodate longer runs. Compatibility: designed for Yamaha outboard 10-pin interface and the 703 remote control box. Buckle-style connector matches the original interface for straightforward installation and secure fit. Construction: ABS body with metal contacts provides durable, corrosion-resistant connections. OE reference: 668-8258A-20-0 supports traceability with Yamaha equipment. Plug-and-play design: plug into existing harnesses without rewiring or modification. Fit: Suitable for Yamaha boats using a 10-pin control wiring system; verify connector type and length before purchase.

Read more less