Portable Car Fuel Saver Gas Economizer Plug is a compact, plug-in device for daily use. It connects to your vehicle's 12V outlet and operates with minimal setup, offering a straightforward way to optimize engine behavior on the road. Designed for everyday driving needs, it supports smoother throttle response and steadier acceleration during city commutes or highway trips, helping you maintain predictable performance across varied conditions. Faster throttle response and smoother acceleration Reduces electronic noise signals to improve ECU response and electrical efficiency Smoother automatic gear shifting Potential for improved fuel economy and better overall engine efficiency Built-in fuse protection enhances safety and device longevity Built-in noise filter can improve audio system performance Fit: designed for use in most standard vehicles with a 12V power outlet.

Read more less

BMW Motorcycle Tire Pressure Sensor Direct Replacement. This sensor monitors tire internal pressure and reports status to your bike’s TPMS, helping you track tire condition during rides with reliable readings. Ideal when TPMS functionality is lost due to a failed sensor or after tire service on BMW touring and sport bikes across F, K, and R series. Installation replaces the old sensor; after fitting, follow the matching procedure to pair with the bike’s system. Direct replacement for worn or damaged TPMS sensors on compatible BMW models Provides tire pressure readings to the onboard TPMS with consistent response Simple installation: remove wheel, swap sensors, then perform the required matching Requires motorcycle TPMS activator for pairing and proper setup Compatible across a broad range of BMW models in F, K, and R series (verify exact year and model) Fit: Suitable for rear-wheel TPMS replacement on the listed BMW models; confirm year and configuration before purchase.

Read more less

This SAE to O-Type Ring Connector is a battery extension cable designed for motorcycle and automobile use. Use it to power portable 12V accessories by connecting to the vehicle battery. It supports equipment such as inflators, portable tools, or small electronics when parked or during maintenance. Brass construction with nickel-plated 205 female terminals for durability SPT-2 18 AWG / 2C cable provides flexible power delivery Includes a 10A automotive fuse for circuit protection Quick connect/disconnect design at SAE and O-Type ring ends for fast setup Cable length approximately 60 cm to reach accessories without excess slack Protective cover included for safe storage when not in use Direct battery connection suitable for most motorcycle and automobile electrical systems Specifications: Length about 60 cm; Cable: SPT-2 18AWG / 2C; Terminal: 205 female, nickel-plated brass; Fuse: 10A. Fit: Compatible with standard car battery terminals and motorcycle batteries using SAE and O-type ring connections.

Read more less

This Glove Box Lid Handle is a plastic replacement part for the Volkswagen Polo (2002–2009). It comes in black and matches OEM reference 6Q0857131D5. Use this handle to replace a broken, loose, or missing glove box lid pull. It is designed for tool-free installation with no drilling required, supporting a straightforward repair and restoring access to stored items. Material: plastic; Color: black; OEM number: 6Q0857131D5; Weight: 52 g Compatibility: Volkswagen Polo 2002–2009 Installation: easy, no punching holes, direct-fit replacement Includes: one glove box lid handle Function: enables smooth opening and closing of the glove box lid Optional specifications: Material plastic; Color black; Weight 52 g; OEM 6Q0857131D5. Fit: Designed for VW Polo models from 2002 to 2009. Please verify compatibility with your vehicle before purchase.

Read more less

This fused cigarette lighter plug with lead is designed for 12V and 24V vehicles, offering a safe, plug‑and‑play power option for a range of automotive accessories. It supports powering items such as car blankets, seat cushions, electric kettles, car cleaners, coolers, CB radios, and inverters from standard lighter sockets. Built-in fuse for overload protection to prevent overheating Universal 12V/24V compatibility across common vehicle outlets Non-slip flat spring plug with pure copper construction for reliable contact Plug-and-play installation—no tools or wiring required Broad accessory compatibility: blankets, cushions, kettles, cleaners, coolers, CB radios, inverters Compact, lightweight design suitable for tight spaces and quick setup Packing size: 21x10 cm. Gross weight: about 92 g. Fits standard 12V and 24V cigarette lighter sockets in most cars, trucks, RVs, and vans.

Read more less

Boxed Car Bumper Repair Welding Wire Set offers six repair nail shapes in 0.6–0.8 mm to match cracks, nicks, and edge damage on automotive plastics. It supports repairs on bumpers, front and rear fenders, dashboards, lamp holders, and other common plastic components. Six nail shapes in 0.6–0.8 mm (round, flat, M, V) for diverse repair profiles. Tungsten steel nails provide hardness and toughness with corrosion resistance. Low-melt welding wire offers good flow and sealing. Boxed sets come in 600–3000 pieces with even distribution. Portable storage box keeps parts organized for on-site use. Compatible with bumpers, dashboards, lamp holders, and other plastic components. Specifications: Nail sizes 0.6–0.8 mm; six shapes; material: tungsten steel; packaging options: 600/1200/1500/1800/3000 pcs with box sizes 21x11x3.5 cm up to 28x18x5 cm. Fit: Designed for automotive plastic repairs on bumpers, dashboards, lamp holders, and similar parts.

Read more less

The 24V Wireless Winch Controller enables wireless control for electric winches with a compact remote and receiver. It uses a 315 MHz link with a practical range beyond 25 m for distant operation from a handheld device. Ideal for off-road vehicles, trailers, or worksites where wired controls are impractical. Pair with a 24V winch to manage forward and reverse from a handheld remote. Remote: 24 V DC; ~25 mA; 315 MHz; 10 dBm; 1x 23A/12V battery (not included). Receiver: 10–15 V DC; ~35 mA; 315 MHz; sensitivity > -106 dBm; drive up to 10 A. Operating temperature: -20°C to 85°C. Controls: Hold OUT for forward, IN for reverse; release stops. Range: over 25 meters (typical, line of sight). Wiring compatibility: designed to integrate with standard winch wiring harnesses. Technical notes: Remote battery type is 1x 23A/12V (not included). Receiver operates from 10–15 V supply; no separate power source required beyond the winch circuit. Fit: Designed to fit 24V electric winches with compatible 315 MHz receiver interfaces; verify your harness and connector compatibility before installation.

Read more less

JST-SM 2.54mm Header Connectors Set provides a compact, versatile collection of 2- to 5-pin headers for hobby electronics. Ideal for quick prototyping, model projects, and simple wiring in automotive, toys, and home appliances where reliable, space-saving connections are needed. 2-pin to 5-pin configurations in a single set for flexible use 2.54 mm (0.1 in) pitch matches common PCB headers and housings SM terminal block termination supports quick, secure plug-in connections Aerial docking wiring method enables fast assembly and reconfiguration Includes 5 pairs each of 2-, 3-, 4-, 5-pin connectors and 80 pins total Compact weight around 62 g with a 12.8 × 6.5 × 2.2 cm box Weight: about 62 g. Box size: 12.8 x 6.5 x 2.2 cm. Fit: Compatible with JST-SM series 2.54 mm header connectors and matching housings.

Read more less

The 3.5mm Stereo Car Audio Cable with a Gold-Plated Elbow provides a sturdy, signal-friendly connection for car stereos, video devices, and massage chairs that use a standard 3.5mm jack. Its durable construction and gold-plated connector help maintain clear sound transfer and reduce corrosion over time. The elbow design supports easy insertion in tight spaces inside vehicles. Gold-plated elbow connector for reliable contact and corrosion resistance Copper conductor with 7/0.12x3C/BC construction for low resistance and durability PU outer jacket with 3.0 mm outer diameter for flexibility and abrasion resistance Length 0.92 m (straightened); weight ~140 g Primary uses include car audio, video devices, and massage chairs Non-oxidizing copper plug design promotes long service life Specifications: PU outer jacket; 3.0 mm cable diameter; gold-plated copper connectors; 0.92 m length; 140 g weight. Compatible with standard 3.5mm stereo jacks found on most car stereos and multimedia devices.

Read more less

Kenwood Aux Audio Input Cable connects portable audio devices to a compatible car stereo, providing a straightforward, corded connection for in-car playback. Designed for car stereos with a 13-pin round disk case main unit, it lets you play music from smartphones, MP3 players, or tablets through vehicle speakers. It supports standard AUX input for basic playback. Copper-core conductor for reliable signal transmission Cable length about 100 cm for flexible routing Weight approximately 60 g for light handling Compatible with 13-pin round disk case main units Durable outer jacket suitable for daily use Simple plug-and-play installation, no tools required Specifications: Copper-core conductor; length about 100 cm; weight about 60 g. Fit: Designed for car stereos using a 13-pin round disk case main unit with AUX input.

Read more less

Stereo Four Section to RCA Female Car Video Cable is a universal adapter designed for automotive video and audio setups. It provides a compact, easy-to-install link between devices that use RCA connections. Use this cable to connect a camera conversion unit, car navigation display, or portable media player to an RCA-equipped head unit, monitor, or dash display. It supports standard automotive AV configurations with minimal setup. Connection: stereo four-section design with standard RCA female connectors for common car AV systems. Length and size: 0.15 m (about 6 inches) long; outer diameter around 3.0 mm; PVC jacket. Construction: PVC flexible wire that stays pliable and resists tangling during installation. Compatibility: suitable for camera-to-display, car navigation video feeds, and car audio links with RCA inputs. Signal quality: designed to reduce interference on short runs and support stable signal transmission. Light specifications: Jacket material is PVC; length 0.15 m; OD 3.0 mm. Fit: designed to fit standard RCA female inputs found on most car video and audio head units and displays.

Read more less

This four-pack Car Horn Switch Button offers a compact on/off control for vehicles and small industrial electronics. Each switch has a 34 x 25 x 14 mm ABS shell with flame-retardant properties. Use this switch to replace worn horn buttons or add a simple, reliable control to dashboards, instrument panels, or enclosure housings. The press-and-hold action provides straightforward on/off operation. Material: ABS with flame-retardant protection Size: 34 x 25 x 14 mm for compact mounting Adhesive backing enables easy surface mounting on flat panels On/off control via press-and-hold action Pack of four switches for multiple circuits or spares Broad compatibility with automotive and industrial electronics Fit: designed for flat panels and dashboards where space is limited; adhesive backing supports quick installation in cars, control boxes, or small enclosures.

Read more less

Car Air Filter High Flow Mushroom-Head Intake Cartridge Small is a universal, washable air filter designed to feed your engine with broader, cleaner airflow. Ideal for daily driving and light performance upgrades, it aims to support throttle response by delivering steadier airflow while reducing waste through its reusable design. Material and housing: stainless steel core with rubber seal; carbon fiber housing for insulation. Universal, clamp-on fit: straightforward installation for a wide range of applications. Caliber and height options: 76 mm opening; choose Small 100 mm, Medium 145 mm, or Large 155 mm. Airflow design: fine-mesh non-woven filtration guides air effectively and minimizes hot-air intake from the engine bay. Reusability: washable and reusable to cut replacement waste. Maintenance interval: clean every 5,000 km under typical highway driving. Specifications: Caliber 76 mm; Heights: 100 mm (Small), 145 mm (Medium), 155 mm (Large). Material: stainless steel, rubber, carbon fiber housing. Fit: Universal compatibility with a clamp-on installation for compatible 76 mm intake systems.

Read more less

The Instrument Panel Extension Cable extends instrument wiring for cars, boats, or motorcycles with a 1 m reach. It features a durable PVC shell and an oxygen-free copper core for reliable electrical performance. Use it to relocate gauges, display modules, or control panels when factory wiring is short or routed through tight spaces. The nickel-plated connectors resist corrosion and ensure a clean plug-in experience across temperatures. Length: 1 m cable for flexible routing Conductor: OD4.5 outer diameter with 24 AWG/28 AWG oxygen-free copper wire core Shell: high-strength PVC housing for durability Connectors: nickel-plated contacts for oxidation resistance and plug stability Compatibility: designed for most cars, boats, motorcycles, and computers Interference: engineered to reduce signal interference and maintain stable connections Optional light specifications: Length is 1 m; no color options listed. Fit: Suitable for most standard instrument panel connections; verify connector type and pinout before installation.

Read more less

This 2 m USB 3.0 and HDMI car extension cable is designed for in-vehicle use, providing a robust extension for USB 3.0 data and HDMI signals. Ideal for extending USB 3.0 data and HDMI connections to rear displays, dash-mounted screens, or head units. The 2 m length offers flexible routing, and the package includes complete accessories for easy setup. 2 m cable length High-strength PVC shell Oxygen-free copper core Nickel-plated connectors for anti-oxidation and durability Waterproof design for car environments Secondary injection molding for insulation and strain relief Fit for automotive use with USB 3.0 and HDMI extensions in cars, SUVs, and trucks, compatible with standard USB 3.0 ports and HDMI displays.

Read more less

Car Retainer Clips Remover Kit — a 680-piece set designed for interior trim work. Made from eco-friendly plastic, it is durable for replacing worn or broken fasteners. Ideal for removing door panels, dashboards, liners, and bumpers on a wide range of vehicles without damaging adjacent parts. 680-piece assortment of clips and removal tools Universal compatibility with a broad range of car models Eco-friendly plastic construction designed for repeated use Suitable for interiors, liners, bumpers, and trim panels Lightweight kit with a total weight of about 900 g and compact footprint (roughly 17 x 17 x 18 cm) Replaces worn or missing retainers and supports safe reassembly Specifications: Weight ~900 g; overall size ~17 x 17 x 18 cm. Fit: Compatible with most passenger cars' interior trim clips; check your vehicle's trim fasteners before use.

Read more less

This 10A 60cm Plug-In O-Type Terminal Power Cable provides a compact, reliable connection for vehicle chargers and 12/24V electrical systems. Use it to power accessories on motorcycles, boats, ATVs, UTVs, campers, caravans, and trailers. The 60 cm length helps keep wiring tidy and out of the way. Fuse: 10A protection for connected devices Connector: O-Type plug for quick, secure connections Cable length: 60 cm for flexible routing Construction: ABS + copper for durability and reliable contact Voltage compatibility: 12/24V DC systems Operating range: -20 to 80 °C for varied conditions Weight: ≈20 g Specifications (optional): Material ABS + copper; Weight ≈20 g; Length 60 cm; Voltage 12/24V DC; Temperature -20 to 80 °C Fit: Designed for standard O-Type terminal layouts used on many vehicle chargers and 12/24V power setups, suitable for motorcycles, boats, ATVs, UTVs, campers, caravans, and trailers.

Read more less

This two-piece dust-proof mesh set is designed for the Tesla Model 3, targeting the air vents under the front seats. Attach under-seat vents to prevent dust and debris from entering the HVAC system; quick to install and remove without leaving residue. Material: honeycomb mesh with hook-and-loop fasteners (magic tape) for easy attachment Size & coverage: approx 12 x 25 cm per piece, two-piece set to cover two vents Compatibility: designed for Tesla Model 3 front under-seat air vents Durability & finish: smooth edges, solid connection, not prone to deformation or aging Installation & care: easy to operate and disassemble; no tools or adhesives required; leaves no residue on vents Light specs: Size about 12 x 25 cm per piece; weight about 9 g per piece. Fit: two-piece set fits under-seat air vents on the Tesla Model 3; ensures coverage while leaving vent openings accessible.

Read more less

Replace a worn or damaged window switch button on your Nissan Juke with this replacement assembly. It is designed to restore reliable power window control without modifying other electrical components. Ideal for models listed, this switch replacement addresses flaky or peeling buttons by restoring tactile feedback and consistent response. ABS material provides stable, reliable performance and long life. Direct-fit replacement for Nissan Juke models: 2011–2017 and 2013–2018. Original factory-standard design ensures proper button geometry and fit. Easy installation: remove the old switch and install this one without modification. Maintains comfortable touch and improves button sensitivity where worn. Specifications: Material — ABS; Compatibility — Nissan Juke (2011–2017, 2013–2018); Finish — factory-style appearance; Installation — tool-free, plug-and-replace. Fit: Direct replacement that matches the original switch module for the Nissan Juke; verify compatibility with your vehicle's OEM part numbers before purchasing.

Read more less

This Android Navigation Cable Set provides a consolidated solution for in-dash installations. It bundles a 7-head audio cable, a 16P power cord, a GPS antenna, and rear-view USB leads in a single kit for reliable, organized wiring. Ideal for updating car multimedia systems or replacing worn connectors on Android navigation units. The kit supports audio, power, GPS, and rear-view camera connections while minimizing interference across components. Bend-resistant, flexible construction reduces the risk of breakage with daily handling Operating range from -30°C to 70°C supports all-weather use 7-head audio cable delivers good conductivity and smooth signal transmission 16P power cord with full copper core and shielding to minimize interference GPS antenna provides anti-interference design and quick satellite lock 4P and 6P USB cables are shielded with four-core copper for stable data transfer 10-pin rear-view line uses oxygen-free copper for reliable camera feed Specifications at a glance: black cables with full copper cores and the included connectors match standard Android navigation setups. Fit: Compatible with Android navigation head units and systems that use these connector configurations.

Read more less

Evaporator Blower Dustproof Sponge Filter for BMW vehicles. This filter uses an ageing-resistant environmental health sponge to reduce dust infiltration and help dampen blower noise in the HVAC system. Designed for BMW 5 Series and 7 Series with evaporator blower housings, it blocks dust while preserving airflow to maintain cabin comfort. Material and purpose: environmental health sponge with dustproof and soundproof properties Size and weight: 245 x 117 mm; approximately 9.8 g Compatibility: fits BMW 5 Series and 7 Series; chassis F18 and F027 Durability: ageing-resistant with good rebound; wear-resistant for longer service life Installation: designed for straightforward replacement in evaporator blower housing Dimensions: 245 × 117 mm; weight about 9.8 g. Fit: compatible with evaporator blower assemblies used in BMW F18/F027 chassis; confirm year range compatibility with your vehicle.

Read more less

Car Boot Carpet Buckle Trunk Puller for Porsche Cayenne (2010–2016). A durable, non-destructive replacement for a worn trunk puller. Ideal when the puller needs replacement or you want a sturdier part that fits the original layout. It aligns with factory mounting points for a seamless swap and preserves the boot area’s appearance. Material and construction: ABS+PC with reinforced card position to resist cracking and bending. Variants and size: Plastic model 138 × 113 × 16 mm; metal model 136 × 114 × 15 mm. Weight: Plastic ≈ 89.6 g; metal ≈ 184.6 g. Compatibility: Precisely matched to the Cayenne 2010–2016 trunk puller mounting points. Installation: Simple to install using existing hardware; non-destructive replacement with no special tools required. Specifications: Material — ABS+PC. Plastic model: 138 × 113 × 16 mm; 89.6 g. Metal model: 136 × 114 × 15 mm; 184.6 g. Fit: Designed to match the original size and mounting points for the Porsche Cayenne 2010–2016, ensuring a straightforward, non-destructive replacement.

Read more less

Replace a worn or damaged center armrest switch in your Mercedes-Benz S-Class W221 (2006–2013) with this durable, easy-to-install replacement. This part directly replaces the old switch, restoring function and interior usability without complicated steps. Direct replacement for the center armrest switch in 2006–2013 Mercedes-Benz S-Class W221 models Durable material resists breakage and corrosion over time Simple installation with no special tools or modifications required Compact size about 44 x 25 mm and weight around 9.4 g Maintains a cohesive cabin look by matching standard interior trim Specifications: Size ≈ 44 × 25 mm; Weight ≈ 9.4 g; Compatible with the center armrest switch location on the 2006–2013 S-Class W221. Fit: Designed to replace the original center armrest switch in the W221 model range.

Read more less

This Car Multimedia Handwriting Board Cover is a durable ABS+PC accessory that protects the controller console touchpad and blends with the vehicle interior. It is sized to fit the handwriting board area in select Mercedes-Benz models. By shielding the touchpad from scratches and daily wear, it helps maintain smooth control over multimedia features during daily driving. Material: ABS+PC, wear-resistant OE numbers: 2059008018, 2139008109, 20590099273 Compatibility: 2015–2018 C-Class W205; 2015–2019 GLC-W253; 2015–2019 GLE-W292; 2015–2019 GLS-W166; 2014–2018 S-Class W222 Size: about 105 x 56 mm Weight: about 12.4 g Easy installation Protects touchpad from scratches and daily wear Specifications: Size 105 x 56 mm; Weight 12.4 g; Material ABS+PC; OE numbers 2059008018, 2139008109, 20590099273. Fit: Designed to match OEM contours and install easily in these models: 2015–2018 C-Class W205; 2015–2019 GLC-W253; 2015–2019 GLE-W292; 2015–2019 GLS-W166; 2014–2018 S-Class W222.

Read more less