Explore Syndmart's wide range of consumer electronics — from audio and home entertainment to smart home devices, power solutions, and specialty gadgets. Whether you're upgrading your living space or looking for the latest tech innovations, our consumer electronics department has everything you need to stay connected, entertained, and powered up.
Consumer Electronics
-
Wireless Lavalier Microphone With Digital Display Case
Capture clear audio for vlogs, live broadcasts, and other recordings with this wireless lavalier microphone. Its 2.4G wireless connection works after plugging in, with no wiring or app required. The upgraded digital display shows connection, reverb, battery, and mute status, helping you check settings at a glance. Flexible pickup: 360-degree omnidirectional recording captures sound from every direction. Sound modes: DSP processing supports simulated original sound, while reverb adds a fuller, more spacious effect. Noise reduction: Vlog mode supports clear vocals, while live broadcast mode adds reverb. Charging use: Use the microphone while charging when your phone battery runs low. Charging case: The 600mAh charging compartment provides convenient storage and recharging. This wireless lavalier microphone helps you record vocals for vlogs and live broadcasts without a wired setup. Specifications Wireless transmission: 2.4G Charging box capacity: 600mAh Microphone battery capacity: 60mAh Battery life: 6 hours Frequency response: 40Hz–20kHz Signal-to-noise ratio: ≥75dB Charging time: Approximately 2 hours Charging current: 70mA Input voltage: DC 4.8–5.2V Display information: Connection, reverb, battery, and mute Packaging Individual package weight: 0.16kg / 0.34lb Individual package size: 18 × 14 × 6cm / 7.09 × 5.51 × 2.36in Quantity per carton: 174 pieces Carton weight: 30kg / 66.14lb Carton size: 50 × 50 × 60cm / 19.69 × 19.69 × 23.62in 20GP loading: 177 cartons × 174 pieces = 30,798 pieces 40HQ loading: 412 cartons × 174 pieces = 71,688 pieces Package Weight One Package Weight 0.16kgs / 0.34lb One Package Size 18cm * 14cm * 6cm / 7.09inch * 5.51inch * 2.36inch Qty per Carton 174 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 174 pcs = 30798 pcs40HQ: 412 cartons * 174 pcs = 71688 pcs
$40.84 - $41.17
-
RGB Mobile Phone Fill Light, Adjustable Brightness
Light your live streams, videos, and photos with this compact RGB mobile phone fill light. Adjustable brightness helps you set the lighting for different shooting situations, while the 120-degree illumination angle covers a broad area. The flexible shaft lets you change the light angle as needed. A touch switch provides quick control, and the lightweight 95-gram design is easy to carry. Two conversion base clips are included for setup flexibility. Portable design: Compact dimensions make it convenient to take anywhere. Bright illumination: 32 large lamp beads deliver 800 lux at 0.5 metres. Rechargeable power: The 1,500 mAh battery provides 2–10 hours of battery life. This mobile fill light is designed for live broadcasting, filming, and photography. Specifications Product type: RGB mobile phone fill light Power supply: 3.7 V Power: 6 W Brightness: 800 lux at 0.5 m Illumination distance: 5 m Colour temperature: 5,600 K Illumination angle: 120 degrees Battery capacity: 1,500 mAh Battery life: 2–10 hours Light source: 32 large lamp beads Controls: Touch switch Dimensions: 110 × 95 × 55 mm Weight: 95 g Shaft: Flexible Package Contents Fill light × 1 Type-C charging cable × 1 Conversion base clip × 2 Manual × 1 Packaging Individual package weight: 0.12 kg / 0.26 lb Individual package size: 13 × 15 × 3 cm / 5.12 × 5.91 × 1.18 in Quantity per carton: 63 units Carton weight: 7.50 kg / 16.53 lb Carton size: 42 × 21 × 27 cm / 16.54 × 8.27 × 10.63 in 20GP loading: 1,119 cartons × 63 units = 70,497 units 40HQ loading: 2,599 cartons × 63 units = 163,737 units Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 13cm * 15cm * 3cm / 5.12inch * 5.91inch * 1.18inch Qty per Carton 63 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 21cm * 27cm / 16.54inch * 8.27inch * 10.63inch Loading Container 20GP: 1119 cartons * 63 pcs = 70497 pcs40HQ: 2599 cartons * 63 pcs = 163737 pcs
$27.50 - $28.89
-
Male To Female XLR Microphone Cable With OFC Shielding
Connect microphones and other audio equipment with this male-to-female XLR microphone cable. Its oxygen-free copper construction, bare copper wire core, and braided shielding layer support high-fidelity signal transmission with strong anti-interference performance. The cable uses a small-waist design with a durable cotton mesh covering. Its black-and-blue tweed finish is paired with a black or silver plug, making the cable easier to identify when setting up or tracking multiple connections. Audio construction: High-coverage oxygen-free copper conductor with braided shielding. Signal performance: Designed for low signal transmission attenuation and high-fidelity sound. Connections: Compatible with XLR plugs, mixers, cameras, microphones, amplifiers, speakers, and equalizers. Finish: Gold-plating process with a black-and-blue tweed cable design. Use this XLR microphone cable for connecting compatible audio equipment in recording and sound setups. Specifications Product type: Male-to-female XLR microphone cable Wire core material: Bare copper wire Wire material: Oxygen-free copper Shielding: Braided shielding layer Process: Gold plating Cable design: Small-waist design with cotton mesh Cable color: Black and blue tweed Plug color: Black or silver Package weight: 0.32 kg / 0.71 lb Package size: 20 × 18 × 6 cm / 7.87 × 7.09 × 2.36 in Compatibility XLR plug equipment Mixer Camera Microphone Amplifier Speaker Equalizer Packaging Quantity per carton: 92 pieces Carton weight: 30.00 kg / 66.14 lb Carton size: 50 × 50 × 60 cm / 19.69 × 19.69 × 23.62 in 20GP loading: 177 cartons × 92 pieces = 16,284 pieces 40HQ loading: 412 cartons × 92 pieces = 37,904 pieces Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 20cm * 18cm * 6cm / 7.87inch * 7.09inch * 2.36inch Qty per Carton 92 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 92 pcs = 16284 pcs40HQ: 412 cartons * 92 pcs = 37904 pcs
-
US18 USB to XLR Female Microphone Recording Cable 2m 3m
Connect a microphone with an XLR female output to your computer using the US18 USB to XLR Female Microphone Recording Cable. Its built-in HS-100B decoder chip provides plug-and-play USB audio, so you can record digital music without installing drivers. The cable supports USB 2.0 and USB 1.1, with compatibility for Mac OS X and Windows 98SE, 2000, XP, Vista, Windows 7, and Windows 8. Shielded wires and zinc alloy connection plugs support a firm connection during use. USB audio: UAC 2.0 support for computer recording. Audio performance: 93 dB signal-to-noise ratio and -78 dB crosstalk. Frequency response: 20 Hz–20 kHz. Low power use: 20–40 mA power consumption. Use this USB microphone cable to connect an XLR microphone for digital music recording on a compatible computer. Specifications Product type: USB to XLR female microphone recording cable Decoder chip: HS-100B USB audio: UAC 2.0 USB support: USB 2.0 / 1.1 Signal-to-noise ratio: 93 dB Crosstalk: -78 dB Distortion: -70 dB THD+N Frequency response: 20 Hz–20 kHz Power consumption: 20–40 mA Operating systems: Mac OS X, Windows 98SE, 2000, XP, Vista, Windows 7, and Windows 8 Construction: Shielded wires and zinc alloy connection plugs Packaging Package weight: 0.18 kg / 0.41 lb Package size: 23 × 15 × 4 cm / 9.06 × 5.91 × 1.57 in Quantity per carton: 60 pieces Carton weight: 9.00 kg / 19.84 lb Carton size: 42 × 40 × 32 cm / 16.54 × 15.75 × 12.6 in 20GP loading: 496 cartons × 60 pieces = 29,760 pieces 40HQ loading: 1,151 cartons × 60 pieces = 69,060 pieces Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 23cm * 15cm * 4cm / 9.06inch * 5.91inch * 1.57inch Qty per Carton 60 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 40cm * 32cm / 16.54inch * 15.75inch * 12.6inch Loading Container 20GP: 496 cartons * 60 pcs = 29760 pcs40HQ: 1151 cartons * 60 pcs = 69060 pcs
$24.64
-
TC048SL 6.35mm Electric Guitar Audio Cable Straight to Elbow
Connect your electric guitar, electronic organ, or bass to a speaker with the TC048SL electric guitar audio cable. It uses a standard 6.35mm interface with a straight plug at one end and an elbow plug at the other, making it suitable for instrument-to-speaker connections. The 6mm PVC jacket surrounds oxygen-free copper wire with aluminium foil and braided double-layer shielding. This construction provides strong anti-interference performance, effective shielding, and noise reduction during use. Metal plugs add a solid connection, while the buffer spring protects the cable tail. Connector design: Straight to elbow configuration with standard 6.35mm interfaces. Cable construction: 6mm outer diameter with a PVC jacket. Shielding: Aluminium foil and braided double-layer shielding around oxygen-free copper wire. Compatible equipment: Electric guitars, electronic organs, bass instruments, and speakers. Use the TC048SL to connect your instrument to a speaker for playing and performance setups. Specifications Model: TC048SL Product type: Electric guitar audio cable Interface: 6.35mm Plug configuration: Straight to elbow Outer diameter: 6mm Jacket material: PVC Conductor: Oxygen-free copper wire Shielding: Aluminium foil and braided double layer Plug material: Metal Tail protection: Buffer spring Packaging Individual package weight: 0.18kg / 0.41lb Individual package size: 27cm × 19cm × 2cm / 10.63in × 7.48in × 0.79in Quantity per carton: 120 pieces Carton weight: 15.50kg / 34.17lb Carton size: 44cm × 32cm × 32cm / 17.32in × 12.6in × 12.6in 20GP loading: 591 cartons × 120 pieces = 70,920 pieces 40HQ loading: 1,373 cartons × 120 pieces = 164,760 pieces Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 27cm * 19cm * 2cm / 10.63inch * 7.48inch * 0.79inch Qty per Carton 120 Carton Weight 15.50kgs / 34.17lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 120 pcs = 70920 pcs40HQ: 1373 cartons * 120 pcs = 164760 pcs
$20.66 - $24.29
-
Q02S Bluetooth Selfie Stick Tripod With Fill Light
Capture selfies, group photos, and hands-free phone moments with the Q02S Bluetooth selfie stick tripod with fill light. Its Bluetooth remote control lets you take pictures from up to 10 meters away, so you can frame your shot before pressing the shutter. The aluminum alloy and ABS design combines a selfie stick with a mobile phone holder. The phone grip holds your device firmly, while the built-in fill light makes taking selfies more convenient. Fold it to 19.4 cm for storage, or extend it to 104.5 m when you need a wider shooting position. Two-in-one design: Use it as a selfie stick or mobile phone holder. Bluetooth control: Take pictures remotely from up to 10 meters away. Fill light: Add light while taking selfies. Secure grip: Holds the phone firmly and is not easy to fall. Use the Q02S for convenient selfies, group photos, and hands-free phone positioning. Specifications Product type: Bluetooth selfie stick tripod with fill light Materials: Aluminum alloy and ABS Bluetooth operating distance: 10 meters Folded bracket size: 19.4 cm Extended size: 104.5 m Weight: 165 g Functions: Selfie stick and mobile phone holder Remote control: Bluetooth picture-taking control Packaging One package weight: 0.21 kg / 0.46 lb One package size: 16 × 6 × 5 cm / 6.3 × 2.36 × 1.97 in Quantity per carton: 100 pieces Carton weight: 18.90 kg / 41.67 lb Carton size: 49 × 33 × 28 cm / 19.29 × 12.99 × 11.02 in 20GP loading: 588 cartons × 100 pieces = 58,800 pieces 40HQ loading: 1,367 cartons × 100 pieces = 136,700 pieces Package Weight One Package Weight 0.21kgs / 0.46lb One Package Size 16cm * 6cm * 5cm / 6.3inch * 2.36inch * 1.97inch Qty per Carton 100 Carton Weight 18.90kgs / 41.67lb Carton Size 49cm * 33cm * 28cm / 19.29inch * 12.99inch * 11.02inch Loading Container 20GP: 588 cartons * 100 pcs = 58800 pcs40HQ: 1367 cartons * 100 pcs = 136700 pcs
-
USB-C Mini Lavalier Microphone With Noise Reduction
Capture clearer speech with this USB-C mini lavalier microphone for Type-C devices. Its small size makes it easy to carry for video recording, web live broadcasts, online classroom broadcasts, and interviews. Noise reduction helps reduce environmental sound during recording, while the high-sensitivity design picks up clear, pure audio. The microphone offers a 20-hour working time and takes about 80 minutes to charge. Use it with compatible Samsung, Huawei, and Honor devices listed below. Compact design: Small and easy to carry. Noise reduction: Helps reduce environmental noise while recording. Clear pickup: High sensitivity for clear, pure sound. Type-C compatibility: Designed for Type-C interface equipment. Specifications Product type: USB-C mini lavalier microphone Frequency range: 2.4 GHz Frequency response: 20–30 kHz Transmission delay: 9 ms Signal-to-noise ratio: 64 dB Input voltage: DC 4.8–5.4 V Charging current: Approximately 65 mA Battery capacity: 80 mAh Working time: Approximately 20 hours Charging time: Approximately 80 minutes Compatibility Samsung: Galaxy M52 5G, A52s 5G, M21 2021, M32, A03s, A22 4G, A82, S21 FE 5G, M62, A72 5G, A53, S21 Ultra 5G, A02s, A12, S20 FE 5G, M21s, M31s, Note20 5G, M01s, Note20, A71s 5G UW, M01, A21s, A51 5G, J2 Core (2020), S20 Ultra 5G, S20 5G, A31, M11, M02, S20+, S20, M40s, A51, Note10+ 5G, A80, A20e, A60, A10, A40, A50, A30, M30, S10+, S10e, A9 (2018) / A9s. Huawei: nova 8 SE Youth, Maimang 10 SE, P50 Pro, P50, Mate 40E 5G, Enjoy 20 SE 4G, nova 8 SE, Mate 30E Pro 5G, Mate 40 RS Porsche Design, nova 7 SE 5G Youth, P smart 2021, Y9a, Enjoy 20 Plus 5G, Y6s 2020, nova 7 Pro 5G, P40 Pro+, P40 lite E, Y7p, P40 Pro, P40, P smart 2020, nova 6 5G, Mate 30 Pro, Mate 30, Y7 Prime (2019), P30 Lite, Y7 Pro (2019), P Smart (2019), Mate 20 X, Mate 20 Pro, Mate 20, P20, P Smart+ (2019), P Smart (Enjoy 7S), Honor Magic. Honor: Magic3, 50, X10 Pro, 30 Youth, X10 Max 5G, Play4 Pro, X10 5G, 30 Pro+, 30, Play 4T Pro, 30S, V30 Pro, 20 Pro, View 20 / V20. Packaging One package: 0.09 kg; 11 × 6 × 3 cm Carton quantity: 120 pieces Carton: 9.84 kg; 33 × 24 × 30 cm 20GP loading: 1,122 cartons × 120 pieces = 134,640 pieces 40HQ loading: 2,605 cartons × 120 pieces = 312,600 pieces This microphone is designed for clearer audio during Type-C video recording, live broadcasts, online classes, and interviews. General Compatible with Samsung: Galaxy M52 5G, Galaxy A52s 5G, Galaxy M21 2021, Galaxy M32, Galaxy A03s, Galaxy A22 4G, Galaxy A82, Galaxy S21 FE 5G, Galaxy M62, Galaxy A72 5G, Galaxy A53, Galaxy S21 Ultra 5G, Galaxy A02s, Galaxy A12, Galaxy S20 FE 5G, Galaxy M21s, Galaxy M31s, Galaxy Note20 5G, Galaxy M01s, Galaxy Note20, Galaxy A71s 5G UW, Galaxy M01, Galaxy A21s, Galaxy A51 5G, Galaxy J2 Core (2020), Galaxy S20 Ultra 5G, Galaxy S20 5G, Galaxy A31, Galaxy M11, Galaxy M02, Galaxy S20+, Galaxy S20, Galaxy M40s, Galaxy A51, Galaxy Note10+ 5G, Galaxy A80, Galaxy A20e, Galaxy A60, Galaxy A10, Galaxy A40, Galaxy A50, Galaxy A30, Galaxy M30, Galaxy S10+, Galaxy S10e, Galaxy A9 (2018) / A9s Huawei: nova 8 SE Youth, Maimang 10 SE, P50 Pro, P50, Mate 40E 5G, Enjoy 20 SE 4G, nova 8 SE, Mate 30E Pro 5G, Mate 40 RS Porsche Design, nova 7 SE 5G Youth, P smart 2021, Y9a, Enjoy 20 Plus 5G, Y6s 2020, nova 7 Pro 5G, P40 Pro+, P40 lite E, Y7p, P40 Pro, P40, P smart 2020, nova 6 5G, Mate 30 Pro, Mate 30, Y7 Prime (2019), P30 Lite, Y7 Pro (2019), P Smart (2019), Mate 20 X, Mate 20 Pro, Mate 20, P20, P Smart+ (2019), P Smart (Enjoy 7S), Honor Magic Honor: Magic3, 50, X10 Pro, 30 Youth, X10 Max 5G, Play4 Pro, X10 5G, 30 Pro+, 30, Play 4T Pro, 30S, V30 Pro, 20 Pro, View 20 / V20 Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 11cm * 6cm * 3cm / 4.33inch * 2.36inch * 1.18inch Qty per Carton 120 Carton Weight 9.84kgs / 21.69lb Carton Size 33cm * 24cm * 30cm / 12.99inch * 9.45inch * 11.81inch Loading Container 20GP: 1122 cartons * 120 pcs = 134640 pcs40HQ: 2605 cartons * 120 pcs = 312600 pcs
$26.13
-
12 Inch USB Desktop Ring Light With 96 LED Beads 10W Lighting
Bring adjustable lighting to your desktop setup with this 12-inch USB ring light. It uses 96 LED beads and delivers 10W of lighting with a 3300–6000K color temperature range. The USB power mode works with a DC 5V USB input, making it suitable for setups with a USB power source. The ring light has a 30cm outer diameter and a 26cm inner diameter. Its ABS and PC construction weighs 485g, while the 2800LM luminous output provides the stated lighting performance. Use it on a desk for tasks that benefit from dedicated ring lighting. Specifications Product type: USB desktop ring light Model: 12-inch ring light LED lamp beads: 96 Outer diameter: 30cm Inner diameter: 26cm Color temperature: 3300–6000K Input voltage: DC 5V USB Power: 10W Luminous output: 2800LM Power mode: USB Material: ABS + PC Single product weight: 485g Packaging One package weight: 1.71kg / 3.78lb One package size: 35cm × 37cm × 6cm / 13.78in × 14.57in × 2.36in Quantity per carton: 10 pieces Carton weight: 18.10kg / 39.90lb Carton size: 37cm × 39cm × 62cm / 14.57in × 15.35in × 24.41in 20GP loading: 298 cartons × 10 pieces = 2,980 pieces 40HQ loading: 691 cartons × 10 pieces = 6,910 pieces This USB desktop ring light is designed to provide dedicated adjustable lighting for desktop use. Package Weight One Package Weight 1.71kgs / 3.78lb One Package Size 35cm * 37cm * 6cm / 13.78inch * 14.57inch * 2.36inch Qty per Carton 10 Carton Weight 18.10kgs / 39.90lb Carton Size 37cm * 39cm * 62cm / 14.57inch * 15.35inch * 24.41inch Loading Container 20GP: 298 cartons * 10 pcs = 2980 pcs40HQ: 691 cartons * 10 pcs = 6910 pcs
-
Sunnylife MC490 USB C Lavalier Microphone For DJI Action3
Capture clearer voice audio with the Sunnylife MC490 USB-C lavalier microphone for compatible DJI cameras. Its omnidirectional electret condenser capsule picks up sound from all directions, with a sensitivity of -34 dB and a 35 Hz–18 kHz frequency range. The lightweight lapel clip attaches to your collar for close voice pickup. A high-density windproof sponge helps reduce wind noise, background interference, and breath-related air spray. The shielded audio cable helps block electromagnetic interference, while the TPE outer coating resists pulling during use. Plug the microphone into a compatible USB-C device for simple external audio recording. The approximately 1.5 m cable gives you room to position the camera and microphone comfortably. Specifications Product type: USB-C lavalier microphone Sensor: Electret condenser Directivity: Omnidirectional Sensitivity: -34 dB Signal-to-noise ratio: 60 dB Frequency range: 35 Hz–18 kHz Connector: USB-C Cable length: Approximately 1.5 m Lapel clip weight: Approximately 6 g Gross weight: Approximately 33 g Compatibility DJI Osmo Action 5 Pro DJI Osmo Pocket 3 DJI Osmo Action 4 DJI Osmo Action 3 DJI Action 2 Packaging One package weight: 0.04 kg / 0.10 lb Package size: 11 × 7 × 2 cm / 4.33 × 2.76 × 0.79 in Quantity per carton: 500 pieces Carton weight: 9.80 kg / 21.61 lb Carton size: 40 × 35 × 25 cm / 15.75 × 13.78 × 9.84 in Container loading: 20GP: 761 cartons × 500 pieces = 380,500 pieces; 40HQ: 1,768 cartons × 500 pieces = 884,000 pieces This microphone is designed for recording voice audio with compatible DJI cameras through a USB-C connection. General Compatible with DJI: Osmo Action 5 Pro, Osmo Pocket 3, Osmo Action 4, Osmo Action 3, Action 2 Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 11cm * 7cm * 2cm / 4.33inch * 2.76inch * 0.79inch Qty per Carton 500 Carton Weight 9.80kgs / 21.61lb Carton Size 40cm * 35cm * 25cm / 15.75inch * 13.78inch * 9.84inch Loading Container 20GP: 761 cartons * 500 pcs = 380500 pcs40HQ: 1768 cartons * 500 pcs = 884000 pcs
$27.62
-
PULUZ Wireless Lavalier Microphone for iPhone iPad
Record clear audio on compatible iPhone and iPad devices with the PULUZ Wireless Lavalier Microphone. Its 2.4G wireless connection supports up to 48K high-fidelity recording, while low-latency operation helps keep recording free from noticeable delay. ENC noise reduction is enabled by default for recording in noisy environments. Use Bluetooth mode for karaoke or to add background sound during recording. The dodging function can automatically suppress Bluetooth music while you record, and the reverb function adds an enhanced sound effect. A 300mAh battery provides up to 12 hours of continuous recording. The system includes one microphone and one receiver, making it suitable for mobile interviews, videos, karaoke, and spoken recordings. Key Features Wireless connection: 2.4G recording with up to 48K high-fidelity audio. Noise reduction: ENC is enabled by default. Bluetooth mode: Supports karaoke and background sound during recording. Audio functions: Includes dodging and reverb modes. Battery: 300mAh capacity with more than 10 hours of talk time. Specifications Product type: Lavalier wireless microphone Channel system: One microphone, one receiver Control method: Button Active/passive: Active 2.4G solution: JieLi AD6976M4 Working system: GFSK Working frequency: 2.4G–2.4835GHz Radio sensitivity: -38dB Effective distance: ≥10m Signal-to-noise ratio: ≥65dB Frequency response: 20Hz–20KHz Monitoring: One-way monitoring Microphone: Electret Transmitter shutdown power consumption: 2μA Transmitter power consumption: 25mA in video mode; 30–40mA in Bluetooth mode Receiver power consumption: 16mA Receiver charging current for mobile phone: 1000mA Talk time: More than 10 hours Standby time: 6 months in off state Charging input: DC 5V, maximum 200 ± 10mA Charging time: 1.5–2 hours Battery capacity: 300mAh Certificates: MSDS, RoHS, FCC, EMC, RED Compatibility Compatible with Apple iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone SE (2022), iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone SE (2020), iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XR, iPhone XS Max, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, and iPhone 6. Compatible iPad models include iPad 10.2 (2021), iPad 10.2 (2020), iPad 10.2 (2019), iPad Air (2019), iPad Pro 10.5 (2019), iPad mini 4, and iPad Air 2. Packaging Package weight: 0.12kg / 0.25lb Package size: 14 × 8 × 5cm / 5.51 × 3.15 × 1.97in Quantity per carton: 180 pieces Carton weight: 18.64kg / 41.09lb Carton size: 48 × 38 × 44cm / 18.9 × 14.96 × 17.32in 20GP loading: 332 cartons × 180 pieces = 59,760 pieces 40HQ loading: 771 cartons × 180 pieces = 138,780 pieces General Certificate MSDS, ROHS, FCC, EMC, RED Compatible with Apple: iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone SE 2022, iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone SE 2020, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XR, iPhone XS Max, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6 Apple: iPad 10.2 (2021), iPad 10.2 (2020), iPad 10.2 (2019), iPad Air （2019）, iPad Pro 10.5 (2019), iPad mini 4, iPad Air 2 Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 180 Carton Weight 18.64kgs / 41.09lb Carton Size 48cm * 38cm * 44cm / 18.9inch * 14.96inch * 17.32inch Loading Container 20GP: 332 cartons * 180 pcs = 59760 pcs40HQ: 771 cartons * 180 pcs = 138780 pcs
$29.07
-
PULUZ Wireless Lavalier Microphone Type C 1 TX 1 RX
Capture clear audio without a cable running between you and your recording device. The PULUZ Wireless Lavalier Microphone uses a 2.4G wireless connection with one transmitter and one Type-C receiver. It supports up to 48 kHz high-fidelity recording and an effective distance of at least 10 metres. ENC noise reduction is enabled by default, helping reduce noise when you record in busy environments. Low-latency operation supports recording without a noticeable delay. In Bluetooth mode, you can use the microphone for karaoke or add background sound during recording. Dodging function: Suppresses Bluetooth music automatically during recording when enabled. Reverb function: Adds reverb to make vocals more expressive. Battery: The 300 mAh battery supports more than 10 hours of talk time. Controls: Button control with one-way monitoring. This wireless lavalier microphone is designed for mobile recording, karaoke, and voice capture with a Type-C connection. Specifications Product type: Lavalier wireless microphone Channel system: One microphone, one receiver Connection: 2.4G wireless; Bluetooth mode 2.4G solution: JieLi AD6976M4 Working system: GFSK Working frequency: 2.4G–2.4835 GHz Radio sensitivity: -38 dB Effective distance: ≥10 metres Signal-to-noise ratio: ≥65 dB Frequency response: 20 Hz–20 kHz Microphone: Electret Recording quality: Up to 48 kHz high-fidelity recording Active/passive: Active Monitoring: One-way Battery: 300 mAh Talk time: More than 10 hours Standby time: 6 months in the off state Charging input: DC 5 V, maximum 200 ± 10 mA Charging time: 1.5–2 hours Transmitter shutdown power consumption: 2 µA Transmitter power consumption: 25 mA in video mode; 30–40 mA in Bluetooth mode Receiver power consumption: 16 mA Receiver charging current for mobile phone: 1000 mA Control method: Button Certificates: MSDS, RoHS, RED Packaging Package weight: 0.12 kg / 0.25 lb Package size: 14 × 8 × 5 cm / 5.51 × 3.15 × 1.97 in Quantity per carton: 180 pieces Carton weight: 18.64 kg / 41.09 lb Carton size: 48 × 38 × 44 cm / 18.9 × 14.96 × 17.32 in 20GP loading: 332 cartons × 180 pieces = 59,760 pieces 40HQ loading: 771 cartons × 180 pieces = 138,780 pieces General Certificate MSDS, ROHS, RED Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 180 Carton Weight 18.64kgs / 41.09lb Carton Size 48cm * 38cm * 44cm / 18.9inch * 14.96inch * 17.32inch Loading Container 20GP: 332 cartons * 180 pcs = 59760 pcs40HQ: 771 cartons * 180 pcs = 138780 pcs
$29.07
-
PULUZ Wireless Lavalier Microphone Type C Dual Mics
Record interviews, videos, karaoke sessions, and more with the PULUZ Wireless Lavalier Microphone Type C Dual Mics. Its dual-microphone, single-receiver setup uses a 2.4G wireless connection and supports up to 48 kHz high-fidelity recording. Low-latency transmission helps you record without a noticeable delay. ENC noise reduction is enabled by default to reduce interference in noisy environments. Bluetooth mode supports karaoke and background sound during recording. When Bluetooth music is playing, the dodging function can automatically suppress it while you record. Reverb mode adds a more expressive sound effect. Extended recording: The 300 mAh battery supports up to 12 hours of continuous recording. Wireless range: The effective distance is greater than or equal to 10 metres. Simple control: Button controls provide straightforward operation. Specifications Product type: Lavalier wireless microphone Configuration: Two microphones and one receiver Connector type: Type C Wireless solution: Jerry AD6976M4 Working system: GFSK Working frequency: 2.4G–2.4835 GHz Radio sensitivity: -38 dB Signal-to-noise ratio: Greater than or equal to 65 dB Frequency response: 20 Hz–20 kHz Microphone: Electret Monitoring: One-way monitoring Battery: 300 mAh Talk time: More than 10 hours Standby time: 6 months in off state Charging time: 1.5–2 hours Charging input: DC 5 V, maximum 200 ± 10 mA Receiver charging current for mobile phone: 1,000 mA Transmitter power consumption: 2 μA when shut down; 25 mA in video mode; 30–40 mA in Bluetooth mode Receiver power consumption: 16 mA Functions: ENC noise reduction, Bluetooth mode, dodging, and reverb Certificates: MSDS, RoHS, and RED Packaging Individual package weight: 0.17 kg / 0.38 lb Individual package size: 16 × 8 × 4.5 cm / 6.3 × 3.15 × 1.77 in Quantity per carton: 100 pieces Carton weight: 16.40 kg / 36.16 lb Carton size: 43 × 34 × 45 cm / 16.93 × 13.39 × 17.72 in 20GP loading: 405 cartons × 100 pieces = 40,500 pieces 40HQ loading: 940 cartons × 100 pieces = 94,000 pieces Use this wireless lavalier microphone system for portable voice recording, karaoke, and Bluetooth-supported recording sessions. General Certificate MSDS, ROHS, RED Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 16cm * 8cm * 4.5cm / 6.3inch * 3.15inch * 1.77inch Qty per Carton 100 Carton Weight 16.40kgs / 36.16lb Carton Size 43cm * 34cm * 45cm / 16.93inch * 13.39inch * 17.72inch Loading Container 20GP: 405 cartons * 100 pcs = 40500 pcs40HQ: 940 cartons * 100 pcs = 94000 pcs
$35.65
-
PULUZ Wireless Lavalier Microphone For iPhone iPad 8 Pin
Record clear audio on a compatible iPhone or iPad with the PULUZ Wireless Lavalier Microphone. Its 2.4G wireless connection supports up to 48 kHz high-fidelity recording, while low-latency operation helps keep sound and video aligned. Built-in ENC noise reduction supports recording in noisy environments. Use BT mode for karaoke or to add background sound during recording. The dodging function can automatically suppress Bluetooth music while you record. Reverb adds a more expressive sound, and the 300 mAh battery supports up to 12 hours of continuous recording. Wireless setup: Dual microphones connect to one receiver. Practical control: Button-operated design with one-way monitoring. Recording range: Effective distance of 10 metres or more. Use this wireless lavalier microphone for mobile recording, karaoke, and voice capture with compatible Apple devices. Specifications Product type: Wireless lavalier microphone Channel system: Two microphones and one receiver Control method: Button Operation: Active Wireless solution: Jerry AD6976M4 Working system: GFSK Working frequency: 2.4G–2.4835 GHz Radio sensitivity: -38 dB Effective distance: ≥10 m Signal-to-noise ratio: ≥65 dB Frequency response: 20 Hz–20 kHz Microphone type: Electret Monitoring: One-way Battery: 300 mAh Talk time: More than 10 hours Standby time: 6 months in off state Charging input: DC 5 V, maximum 200 ± 10 mA Charging time: 1.5–2 hours Transmitter shutdown consumption: 2 μA Transmitter consumption: 25 mA in video mode; 30–40 mA in Bluetooth mode Receiver consumption: 16 mA Receiver charging current for mobile phone: 1000 mA Certificates: MSDS, RoHS, RED Compatibility Compatible with Apple iPhone 14 Plus, 14, 14 Pro, 14 Pro Max, SE 2022, 13 Pro Max, 13, 13 mini, 13 Pro, 12, 12 Pro Max, 12 Pro, 12 mini, SE 2020, 11 Pro, 11 Pro Max, 11, XS, XR, XS Max, X, 8 Plus, 8, 7, 7 Plus, SE, 6s Plus, 6s, 6 Plus, and 6. Compatible with Apple iPad 10.2 (2021), iPad 10.2 (2020), iPad 10.2 (2019), iPad Air (2019), iPad Pro 10.5 (2019), iPad mini 4, and iPad Air 2. Packaging Individual package weight: 0.17 kg Individual package size: 16 × 8 × 4.5 cm Quantity per carton: 100 pieces Carton weight: 16.40 kg Carton size: 43 × 34 × 45 cm 20GP loading: 405 cartons × 100 pieces = 40,500 pieces 40HQ loading: 940 cartons × 100 pieces = 94,000 pieces General Certificate MSDS, ROHS, RED Compatible with Apple: iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone SE 2022, iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone SE 2020, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XR, iPhone XS Max, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6 Apple: iPad 10.2 (2021), iPad 10.2 (2020), iPad 10.2 (2019), iPad Air （2019）, iPad Pro 10.5 (2019), iPad mini 4, iPad Air 2 Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 16cm * 8cm * 4.5cm / 6.3inch * 3.15inch * 1.77inch Qty per Carton 100 Carton Weight 16.40kgs / 36.16lb Carton Size 43cm * 34cm * 45cm / 16.93inch * 13.39inch * 17.72inch Loading Container 20GP: 405 cartons * 100 pcs = 40500 pcs40HQ: 940 cartons * 100 pcs = 94000 pcs
$35.69
-
1/4 Inch TRS Male To 3 Pin XLR Female Microphone Cable
Connect microphones and audio equipment with this 1/4-inch (6.35 mm) TRS male to 3-pin XLR female microphone cable. It uses a balanced connection and supports 48V phantom power when used with compatible microphones. The double-layer shielding helps reduce noise, while the metal shell is designed to resist interference and noise. Gold-plated joint: Supports good contact performance and antioxidant resistance. Flexible construction: Soft PVC wire helps the cable bend during setup. Protected cable end: A buffer protective sleeve helps protect the wire and reduce the risk of breakage. Wide application: Connect mixing consoles, sound cards, microphones, active monitor speakers, and other equipment. Use this balanced audio cable for microphone and equipment connections where 48V phantom power support is required. Specifications Connector 1: 1/4-inch (6.35 mm) TRS male plug Connector 2: 3-pin XLR female plug Connection type: Balanced Phantom power: Supports 48V phantom power Wire material: Soft PVC wire Shielding: Double-layer shielding wire Shell: Metal Packaging Individual package weight: 0.09 kg / 0.21 lb Individual package size: 20 × 15 × 2 cm / 7.87 × 5.91 × 0.79 in Quantity per carton: 100 pieces Carton weight: 10.00 kg / 22.05 lb Carton size: 50 × 40 × 30 cm / 19.69 × 15.75 × 11.81 in 20GP loading: 444 cartons × 100 pieces = 44,400 pieces 40HQ loading: 1,031 cartons × 100 pieces = 103,100 pieces Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 20cm * 15cm * 2cm / 7.87inch * 5.91inch * 0.79inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 40cm * 30cm / 19.69inch * 15.75inch * 11.81inch Loading Container 20GP: 444 cartons * 100 pcs = 44400 pcs40HQ: 1031 cartons * 100 pcs = 103100 pcs
$21.09 - $25.43
-
RCA20 XLR Female to Dual RCA Y-Splitter Audio Cable for Players
Connect an audio player’s XLR output to two RCA inputs with the RCA20 XLR Female to Dual RCA Y-Splitter Audio Cable. It converts the signal to two RCA male outputs carrying two mono audio signals at the same time. Use it with a power amplifier or mixing console input. The cable is also suitable for mixers, active speakers, microphones, and other compatible audio equipment. Its OFC oxygen-free copper conductor supports near-zero-loss sound transmission, while double-layer aluminum foil and copper-wire shielding helps reduce interference and excess noise. Connector design: Metal shell with gold-plated RCA plugs and a detachable XLR Canon head. Cable protection: Soft PVC XLR sheath with a 4.0 mm outer diameter and woven-mesh protection. Connection method: RCA signal is connected in parallel to XLR pin 2; the RCA shield connects to XLR pins 1 and 3. Direction: Converts XLR audio output to dual RCA output; it does not combine dual RCA signals into XLR. This cable is intended for routing an XLR audio output to two RCA mono inputs. Specifications Product type: XLR female to dual RCA male Y-splitter audio cable Output: Two mono audio signals Conductor: OFC oxygen-free copper Shielding: Double-layer aluminum foil and copper wire Insulation: Polyethylene XLR sheath: Soft PVC XLR sheath diameter: 4.0 mm Packaging One package weight: 0.06 kg / 0.14 lb One package size: 16 × 21 × 1.5 cm / 6.3 × 8.27 × 0.59 in Quantity per carton: 120 pieces Carton weight: 8.10 kg / 17.86 lb Carton size: 42 × 48 × 30 cm / 16.54 × 18.9 × 11.81 in 20GP loading: 440 cartons × 120 pieces = 52,800 pieces 40HQ loading: 1,023 cartons × 120 pieces = 122,760 pieces Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 16cm * 21cm * 1.5cm / 6.3inch * 8.27inch * 0.59inch Qty per Carton 120 Carton Weight 8.10kgs / 17.86lb Carton Size 42cm * 48cm * 30cm / 16.54inch * 18.9inch * 11.81inch Loading Container 20GP: 440 cartons * 120 pcs = 52800 pcs40HQ: 1023 cartons * 120 pcs = 122760 pcs
$21.68 - $22.12
-
LZ1179 6.35mm TRS Male To XLR 3-Pin Female Adapter
Connect equipment with different audio interfaces using the LZ1179 6.35mm TRS male to XLR 3-pin female adapter. It supports interface switching between a balanced 6.35mm input and XLR connection, making it suitable for a range of audio equipment. The nickel-plated metal shell provides shielding against external signal interference. Use this audio adapter with microphones, mixing consoles, headphone amplifiers, power amplifiers, sound cards, electronic keyboards, electric guitars, or electronic drums. Connector type: 6.35mm TRS male to XLR 3-pin female. Construction: Nickel-plated metal shell. Audio use: Supports interface switching for compatible audio equipment. This adapter is designed for connecting compatible microphone and audio equipment with different connector interfaces. Specifications Product model: LZ1179 Product type: Audio adapter TRS connector: 6.35mm male XLR connector: 3-pin female Input type: Balanced 6.35mm input Shell material: Metal Shell finish: Nickel plating Shielding: Metal shell shields external signal interference Compatible equipment: Microphone, mixing console, headphone amplifier, power amplifier, sound card, electronic keyboard, electric guitar, and electronic drum Packaging One package weight: 0.05 kg / 0.11 lb One package size: 9 × 4 × 2 cm / 3.54 × 1.57 × 0.79 in Quantity per carton: 300 pieces Carton weight: 12.40 kg / 27.34 lb Carton size: 40 × 30 × 20 cm / 15.75 × 11.81 × 7.87 in 20GP loading: 1,111 cartons × 300 pieces = 333,300 pieces 40HQ loading: 2,579 cartons × 300 pieces = 773,700 pieces Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 9cm * 4cm * 2cm / 3.54inch * 1.57inch * 0.79inch Qty per Carton 300 Carton Weight 12.40kgs / 27.34lb Carton Size 40cm * 30cm * 20cm / 15.75inch * 11.81inch * 7.87inch Loading Container 20GP: 1111 cartons * 300 pcs = 333300 pcs40HQ: 2579 cartons * 300 pcs = 773700 pcs
$19.58
-
CYKE L11 L10 Mini Phone Selfie Stick Tripod Holder
Capture photos, videos, and live broadcasts with the CYKE L11 L10 Mini Phone Selfie Stick Tripod Holder. Its compact design combines a selfie stick, integrated tripod, phone holder, and detachable Bluetooth remote control in one carry-friendly device. Adjust the stretch length from 15.2 cm to 73 cm to frame your shot from different positions. The holder supports both horizontal and vertical screen use, while multiple camera modes suit different scenes. A silicone pad on the tripod base helps keep it stable and non-slip during use. Remote control: Embedded Bluetooth control works from up to 10 metres. Materials: ABS with stainless steel or aluminium alloy components. Portability: Small size makes it easy to carry. Battery: CR1632 battery included for the remote control. Use the CYKE L11 L10 to hold your phone for selfies, tripod shots, camera use, and live broadcasting. Specifications Product type: Mini phone selfie stick tripod holder Functions: Integrated tripod, detachable Bluetooth remote control, multifunctional live broadcast and camera phone holder Material: ABS, stainless steel or aluminium alloy Stretch length: 15.2–73 cm Screen orientation: Horizontal and vertical Remote range: Up to 10 metres Remote battery: CR1632 × 1, included Tripod base: Silicone pad Net weight: Aluminium alloy: 122 g; stainless steel: 133 g Shipping contents: Bracket only Packaging One package weight: 0.14 kg / 0.32 lb One package size: 16 × 5 × 4 cm / 6.3 × 1.97 × 1.57 in Quantity per carton: 100 pieces Carton weight: 14.60 kg / 32.19 lb Carton size: 40 × 33 × 28 cm / 15.75 × 12.99 × 11.02 in Container loading: 20GP: 721 cartons × 100 pieces = 72,100 pieces; 40HQ: 1,674 cartons × 100 pieces = 167,400 pieces Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 16cm * 5cm * 4cm / 6.3inch * 1.97inch * 1.57inch Qty per Carton 100 Carton Weight 14.60kgs / 32.19lb Carton Size 40cm * 33cm * 28cm / 15.75inch * 12.99inch * 11.02inch Loading Container 20GP: 721 cartons * 100 pcs = 72100 pcs40HQ: 1674 cartons * 100 pcs = 167400 pcs
$24.00
-
XTUGA RW2080 UHF Wireless In-Ear Monitor Receiver Bodypack
Keep your wireless in-ear monitoring setup easy to check and adjust with the XTUGA RW2080 UHF Wireless In-Ear Monitor Receiver Bodypack. It receives UHF signals across the 572–603 MHz frequency range and offers 40 preset channels arranged across four separately set groups. The LCD display shows the receiver’s working status, while the low-battery reminder helps you monitor power during use. Manual adjustment and single-tuning reception provide straightforward operation. Connect compatible earphones through the 3.5 mm output jack and use two AA batteries to power the bodypack. Wireless range: More than 250 ft. Audio response: 50 Hz–15 kHz, ±3 dB. Signal performance: Sensitivity specification includes 25 kHz deviation, 7 dBµV connection, and an S/N ratio greater than 78 dB. The XTUGA RW2080 is designed for receiving wireless in-ear monitor audio through a compact bodypack receiver. Specifications Oscillation mode: PLL synthesized Frequency range: 572–603 MHz Preset channels: 40 channels; four separately set groups Operating mode: Manual adjustment Receiving mode: Single tuning Display: LCD Earphone output: 3.5 mm jack Power supply: Two AA batteries, not included Bodypack size: 8.0 × 6.5 cm Packaging One package weight: 0.22 kg / 0.49 lb One package size: 20 × 13 × 7 cm / 7.87 × 5.12 × 2.76 in Quantity per carton: 54 pieces Carton weight: 12.00 kg / 26.46 lb Carton size: 59 × 45 × 33 cm / 23.23 × 17.72 × 12.99 in 20GP loading: 304 cartons × 54 pieces = 16,416 pieces 40HQ loading: 706 cartons × 54 pieces = 38,124 pieces Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 20cm * 13cm * 7cm / 7.87inch * 5.12inch * 2.76inch Qty per Carton 54 Carton Weight 12.00kgs / 26.46lb Carton Size 59cm * 45cm * 33cm / 23.23inch * 17.72inch * 12.99inch Loading Container 20GP: 304 cartons * 54 pcs = 16416 pcs40HQ: 706 cartons * 54 pcs = 38124 pcs
$57.26
-
XTUGA A140-B UHF Wireless Microphone System 4-Channel
Set up four wireless microphone channels for parties, weddings, speeches, conferences, small gigs, and karaoke with the XTUGA A140-B UHF Wireless Microphone System. Its fixed-frequency UHF receiver uses four Group A frequencies and supports stable signal reception with two rear-mounted antennas. The metal and ABS construction is designed for regular use, while the unidirectional bodypack microphones feature high-sensitivity dynamic cartridges. Separate volume controls let you adjust each channel, and LCD displays show battery usage and operating status clearly. Flexible connections: Four XLR balanced outputs and one 6.35 mm mix output connect to amplifiers, mixers, stereos, and other external devices. Sound control: The dynamic cartridges are designed to limit feedback and interference while capturing sound smoothly. Wireless range: The system has a receiving distance of up to 50 metres. This four-channel UHF microphone system gives you a practical setup for multi-microphone events and performances. Specifications Brand: XTUGA Model: A140-B Product type: Four-channel UHF wireless microphone system Material: Metal and ABS Frequency: 504.5–593.2 MHz Frequency type: Fixed frequency Group: Group A Group A frequencies: 504.50 MHz, 514.60 MHz, 521.90 MHz, and 538.70 MHz Receiving distance: 50 metres Receiver outputs: Four XLR balanced outputs and one 6.35 mm mix output Microphone type: Unidirectional bodypack microphones Microphone cartridge: Dynamic Displays: LCD displays on the receiver and microphones Antennas: Two antennas can be installed on the rear of the receiver Packaging Individual package weight: 4.00 kg / 8.83 lb Individual package size: 53 × 32 × 15 cm / 20.87 × 12.6 × 5.91 inches Quantity per carton: 4 units Carton weight: 17.00 kg / 37.48 lb Carton size: 55 × 54 × 33 cm / 21.65 × 21.26 × 12.99 inches 20GP loading: 272 cartons × 4 units = 1,088 units 40HQ loading: 631 cartons × 4 units = 2,524 units Package Weight One Package Weight 4.00kgs / 8.83lb One Package Size 53cm * 32cm * 15cm / 20.87inch * 12.6inch * 5.91inch Qty per Carton 4 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 54cm * 33cm / 21.65inch * 21.26inch * 12.99inch Loading Container 20GP: 272 cartons * 4 pcs = 1088 pcs40HQ: 631 cartons * 4 pcs = 2524 pcs
$239.43
-
TUYU Phone Neck Holder Chest Strap Mount for POV Video
Keep your hands free while recording POV video with the TUYU phone neck holder chest strap mount. Its upgraded strap-style design is suited to sports and other shooting scenes, with a structure designed not to shake during movement. The curved extension lets you watch your phone screen in real time. Silicone surrounds the streamlined neck section to fit the neck’s curve without strangling it. A closed-loop fast lock makes installation and removal straightforward. Flexible shooting: Use horizontal or vertical shooting. Vertical shooting requires a vertical shooting adapter bracket. Adjustable strap: Set the fixed belt from 73 cm to 132 cm. Material: Made from PC material with strong, durable, and good-toughness characteristics. Use the TUYU phone neck holder for hands-free POV recording across a range of shooting situations. Specifications Product type: Phone neck holder and chest strap mount Brand: TUYU Material: PC with silicone neck covering Shooting orientation: Horizontal and vertical Vertical shooting: Requires a vertical shooting adapter bracket Fixed belt adjustment range: 73 cm–132 cm Package weight: 0.22 kg / 0.49 lb Package size: 28 × 20 × 4 cm / 11.02 × 7.87 × 1.57 in Packaging Quantity per carton: 56 pieces Carton weight: 13.00 kg / 28.66 lb Carton size: 58 × 49 × 45 cm / 22.83 × 19.29 × 17.72 in 20GP loading: 208 cartons × 56 pieces = 11,648 pieces 40HQ loading: 484 cartons × 56 pieces = 27,104 pieces Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 28cm * 20cm * 4cm / 11.02inch * 7.87inch * 1.57inch Qty per Carton 56 Carton Weight 13.00kgs / 28.66lb Carton Size 58cm * 49cm * 45cm / 22.83inch * 19.29inch * 17.72inch Loading Container 20GP: 208 cartons * 56 pcs = 11648 pcs40HQ: 484 cartons * 56 pcs = 27104 pcs
$24.78 - $27.50
-
Wireless Lavalier Microphones for iPhone Android Set
Capture clear audio on the go with this wireless lavalier microphone set for iPhone, Android phones, cameras, computers, and more. Its compact body and mini clip attach easily to a collar or pocket, making it convenient for interviews, podcasts, video blogs, online meetings, and live broadcasts. Plug and play: Connect without drivers or applications. Two-microphone support: The receiver can connect two microphones at the same time. Real-time monitoring: Use headphones to monitor recorded audio directly. Noise reduction: Intelligent technology helps minimize environmental sounds. Wireless transmission: Advanced 2.4GHz technology provides up to 65 feet (20 meters) of signal coverage with automatic real-time synchronization. Rechargeable battery: Approximately 2 hours of charging provides up to 6 hours of use. Use this wireless microphone set to record interviews, meetings, podcasts, videos, and live content with portable audio support. Specifications Product type: Wireless lavalier microphone set Compatibility: iPhone, iPad, Android phone, camera, DSLR, computer, laptop, MacBook, action camera, and video camera Transmission technology: 2.4GHz Signal coverage: Up to 65 feet (20 meters) Charging time: Approximately 2 hours Operating time: Up to 6 hours Battery: Built-in rechargeable lithium battery Monitoring: Real-time headphone monitoring Connection: Plug and play; no drivers or applications required Packaging One package weight: 0.10 kg / 0.22 lb One package size: 15 × 15 × 3 cm / 5.91 × 5.91 × 1.18 in Quantity per carton: 100 units Carton weight: 9.00 kg / 19.84 lb Carton size: 40 × 40 × 40 cm / 15.75 × 15.75 × 15.75 in 20GP loading: 416 cartons × 100 units = 41,600 units 40HQ loading: 967 cartons × 100 units = 96,700 units Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 15cm * 3cm / 5.91inch * 5.91inch * 1.18inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 40cm * 40cm * 40cm / 15.75inch * 15.75inch * 15.75inch Loading Container 20GP: 416 cartons * 100 pcs = 41600 pcs40HQ: 967 cartons * 100 pcs = 96700 pcs
$28.85 - $31.70
-
BM800 Condenser Microphone Set With V8S Sound Card
Set up a home recording space for podcasts, livestreams, vocals, short videos, and music with the BM800 Condenser Microphone Set and V8S sound card. The cardioid pickup pattern focuses on sound in front of the microphone, while the condenser design captures detailed voice recordings with a rich, rounded sound. The included adjustable boom stand, shock mount, pop filter, and windproof foam cap help you position and prepare the microphone for recording. The V8S sound card provides a variety of sound effects and supports voice changing for calls, chats, live singing, and video creation. Device support: Connect to a computer, mobile phone, laptop, tablet, or gaming platform. System compatibility: Works with mainstream Windows and OS systems, plus Android and iOS smartphones. Construction: Metal shell technology. This microphone and sound card set gives you the equipment for voice recording, streaming, and mobile content creation. Specifications Microphone: BM800 condenser microphone Pickup pattern: Cardioid Sound card: V8S with multiple sound effects and voice changer Connection options: Different connection methods for computers, mobile devices, and laptops Supported devices: Mobile phones, computers, tablets, and gaming platforms Supported systems: Windows, OS, Android, and iOS Shell material: Metal Package Contents 1 × BM800 microphone 1 × V8S sound card 1 × Sponge cap 1 × Microphone shock mount 1 × Metal cantilever bracket 1 × Anti-blowout net 1 × XLR cable 1 × Instruction manual Packaging Individual package weight: 1.36 kg / 2.99 lb Individual package size: 42 × 21 × 7 cm / 16.54 × 8.27 × 2.76 in Quantity per carton: 20 pieces Carton weight: 28.10 kg / 61.95 lb Carton size: 68 × 44 × 44 cm / 26.77 × 17.32 × 17.32 in 20GP loading: 202 cartons × 20 pieces = 4,040 pieces 40HQ loading: 470 cartons × 20 pieces = 9,400 pieces Package Weight One Package Weight 1.36kgs / 2.99lb One Package Size 42cm * 21cm * 7cm / 16.54inch * 8.27inch * 2.76inch Qty per Carton 20 Carton Weight 28.10kgs / 61.95lb Carton Size 68cm * 44cm * 44cm / 26.77inch * 17.32inch * 17.32inch Loading Container 20GP: 202 cartons * 20 pcs = 4040 pcs40HQ: 470 cartons * 20 pcs = 9400 pcs
$55.61 - $58.31
-
Zinc Alloy 3-Pin Female to 5-Pin Male XLR DMX Adapter
Connect equipment with different XLR formats using this zinc alloy 3-pin female to 5-pin male XLR DMX adapter. Its bidirectional conversion supports 3-pin XLR male to 5-pin XLR male and 5-pin XLR female to 3-pin XLR female connections. Use it with video cameras, DMX signals, audio cable conversions, and other compatible equipment. Metal construction: The zinc alloy shell provides a full metal design for interference shielding. Contact components: All copper contact pins and sockets support the adapter’s XLR connections. Compact format: Measuring approximately 73 × 18.5 mm, it is suited to connection setups where space matters. This XLR adapter provides a practical connection option for video, DMX, and audio equipment using compatible 3-pin and 5-pin interfaces. Specifications Product type: 3-pin female to 5-pin male XLR DMX adapter Interface type: 3-pin XLR female and 5-pin XLR male Conversion: Bidirectional; 3-pin XLR male to 5-pin XLR male, and 5-pin XLR female to 3-pin XLR female Material: Zinc alloy shell Contact pins and sockets: Copper Size: Approximately 73 × 18.5 mm Product weight: Approximately 45 g Applications: Video cameras, DMX signals, audio cable conversion, and other equipment Packaging Package type: Bag One package weight: 0.06 kg / 0.12 lb One package size: 12 × 8 × 2 cm / 4.72 × 3.15 × 0.79 in Quantity per carton: 500 pieces Carton weight: 14.00 kg / 30.86 lb Carton size: 40 × 25 × 25 cm / 15.75 × 9.84 × 9.84 in 20GP loading: 1,066 cartons × 500 pieces = 533,000 pieces 40HQ loading: 2,476 cartons × 500 pieces = 1,238,000 pieces Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 14.00kgs / 30.86lb Carton Size 40cm * 25cm * 25cm / 15.75inch * 9.84inch * 9.84inch Loading Container 20GP: 1066 cartons * 500 pcs = 533000 pcs40HQ: 2476 cartons * 500 pcs = 1238000 pcs
$20.66
-
MTU-002 UHF Wireless Microphone System Transmitter Receiver
Take your microphone setup wireless with the MTU-002 UHF Wireless Microphone System. The transmitter and receiver use built-in dual antennas to help resist Wi-Fi, electromagnetic, and other interference, with a transmission distance of about 30 metres. The LED screen shows the frequency, power indicator, and signal strength bar clearly. Choose Mic or Line mode to suit your setup, while the built-in rechargeable lithium battery supports about five hours of operation. Plug-and-play operation keeps setup simple. Microphone support: Works with dynamic microphones and condenser microphones with built-in power supply. Connection: Includes an XLR female to 6.35 mm male microphone adapter. Compatibility: Suitable for mixers, recorders, speakers, PA systems, and amplifiers. Use the MTU-002 for stable wireless microphone transmission in compatible audio setups. Specifications Material: ABS Channels: 6 Transmission distance: About 30 metres Operating duration: About 5 hours Power supply: Built-in rechargeable lithium battery Battery: 3.7 V, 400 mAh lithium-ion battery Delay: About 5 ms Sound dynamics: 110 dB Audio: 24-bit / 48 kpbs Frequency response: 20 Hz–20 kHz Antenna impedance: 50 Ω Signal-to-noise ratio: 110 dB Product dimensions: 70 × 30 × 30 mm Product weight: 200 g Package Contents XLR female to 6.35 mm male microphone adapter Packaging Individual package weight: 0.40 kg / 0.87 lb Individual package size: 17 × 14 × 6 cm / 6.69 × 5.51 × 2.36 in Quantity per carton: 20 pieces Carton weight: 8.00 kg / 17.64 lb Carton size: 35 × 29 × 30 cm / 13.78 × 11.42 × 11.81 in 20GP loading: 875 cartons × 20 pieces = 17,500 pieces 40HQ loading: 2,032 cartons × 20 pieces = 40,640 pieces Package Weight One Package Weight 0.40kgs / 0.87lb One Package Size 17cm * 14cm * 6cm / 6.69inch * 5.51inch * 2.36inch Qty per Carton 20 Carton Weight 8.00kgs / 17.64lb Carton Size 35cm * 29cm * 30cm / 13.78inch * 11.42inch * 11.81inch Loading Container 20GP: 875 cartons * 20 pcs = 17500 pcs40HQ: 2032 cartons * 20 pcs = 40640 pcs
$67.24
You have seen 480 out of 2185 products