Explore Syndmart's wide range of consumer electronics — from audio and home entertainment to smart home devices, power solutions, and specialty gadgets. Whether you're upgrading your living space or looking for the latest tech innovations, our consumer electronics department has everything you need to stay connected, entertained, and powered up.
Consumer Electronics
-
HABOTEST HT85 Non Contact AC Voltage Detector Tester
Check for AC voltage without touching the conductor using the HABOTEST HT85 non-contact voltage detector tester. Bring the extended probe near a power source and watch the LED signal indicator. The red light flashes faster as signal strength increases, while the buzzer sounds more frequently. Use the built-in LED flashlight when testing in dark areas. The tester also helps identify circuit breakpoints by stopping its light and sound signals when a breakpoint is detected. A pen clip supports portable use, while the high-strength shield is described as sturdy, wear-resistant, and unbreakable. Low-battery warning: The power indicator flashes when the battery voltage is too low. Auto power-off: Shuts down after about five minutes without operation or an inductive signal. Signal display: LED indicators progress from green to red as signal strength rises. The HABOTEST HT85 is designed for portable, non-contact AC voltage detection and circuit checking. Specifications Display: LED Voltage detection range: AC 70–1000 V Frequency: 50/60 Hz Alarm mode: Sound and light alarm Probe shape: Extended Detection method: Inductive field, non-contact voltage detection Signal strength: Sound changes from slow to fast; LED changes from green to red Charged and neutral indication: The test signal on the firewire is stronger than the neutral according to signal strength Power supply: 2 × 1.5 V AAA batteries Batteries: Not included Safety level: EN61010-1, EN61010-2-030, EN61326-1, CAT III 1000 V Dimensions: Approximately 146.6 × 24 × 27 mm Weight: Approximately 28.7 g Packaging One package weight: 0.05 kg / 0.12 lb One package size: 15 × 4 × 3 cm / 5.91 × 1.57 × 1.18 in Quantity per carton: 200 pieces Carton weight: 11.60 kg / 25.57 lb Carton size: 44 × 33 × 30 cm / 17.32 × 12.99 × 11.81 in 20GP loading: 612 cartons × 200 pieces = 122,400 pieces 40HQ loading: 1,421 cartons × 200 pieces = 284,200 pieces Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 4cm * 3cm / 5.91inch * 1.57inch * 1.18inch Qty per Carton 200 Carton Weight 11.60kgs / 25.57lb Carton Size 44cm * 33cm * 30cm / 17.32inch * 12.99inch * 11.81inch Loading Container 20GP: 612 cartons * 200 pcs = 122400 pcs40HQ: 1421 cartons * 200 pcs = 284200 pcs
$27.63
-
HABOTEST HT636 Digital Differential Pressure Gauge
Measure small air-pressure differences with the HABOTEST HT636 Digital Differential Pressure Gauge. Its precision sensors capture differential pressure readings clearly, helping reduce parallax and pointer-reading errors. The HT636 measures fluid differential pressure, flow rate, and flow velocity in 0.5 seconds. A single key switches between multiple pressure units, while the pagoda-style connectors make rubber hose installation quick and provide sealing performance. Clear display: The high-definition backlight supports measurements in dark conditions. Comfortable handling: Rubber buttons and a concave-convex anti-slip body design support easy operation. Portable build: The ABS engineering plastic shell uses double injection molding and is designed for wear and drop resistance. Battery powered: Uses three 1.5 V AAA batteries, which are not included. Use this compact pressure gauge for quick differential pressure, flow rate, and flow velocity measurements. Specifications Product: Digital differential pressure gauge Model: HT636 Measurements: Fluid differential pressure, flow rate, and flow velocity Measurement speed: Within 0.5 seconds Pressure units: Multiple units with one-key switching Sensor: Precision sensor Connector: Pagoda-type connector Display: High-definition backlit display Material: ABS engineering plastic shell Power: 3 × 1.5 V AAA batteries Battery inclusion: Batteries not included Product size: Approximately 153 × 60 × 31 mm Packaging One-package weight: 0.34 kg / 0.76 lb One-package size: 23 × 12 × 5 cm / 9.06 × 4.72 × 1.97 in Quantity per carton: 40 units Carton weight: 15.00 kg / 33.07 lb Carton size: 49 × 26 × 48 cm / 19.29 × 10.24 × 18.9 in 20GP loading: 436 cartons × 40 units = 17,440 units 40HQ loading: 1,012 cartons × 40 units = 40,480 units Package Weight One Package Weight 0.34kgs / 0.76lb One Package Size 23cm * 12cm * 5cm / 9.06inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 49cm * 26cm * 48cm / 19.29inch * 10.24inch * 18.9inch Loading Container 20GP: 436 cartons * 40 pcs = 17440 pcs40HQ: 1012 cartons * 40 pcs = 40480 pcs
$67.96
-
HABOTEST HT616 Car Paint Coating Thickness Tester
Check car paint coating thickness with the HABOTEST HT616 tester. Its high-sensitivity probe identifies the material type and coating thickness when you press to measure, while automatic substrate recognition removes the need to switch manually between iron and aluminum substrates. The tester offers a resolution of up to 0.1 micron and uses a high-speed chip for accurate, stable readings. Choose single, continuous, single-point, or multi-point measurement to suit the task. Store up to 256 readings across 8 groups of 32, then review them on the large, backlit LCD display. Calibration: Includes zero and multi-point calibration. It is factory-calibrated using standard iron and aluminum substrates; other materials require substrate calibration. Alarm limits: Five consecutive beeps sound when a reading falls below the lower limit or exceeds the upper limit. Practical design: The screen automatically flips according to gravity sensing. Rubber buttons and a non-slip, secondary-injection-molded shell support comfortable handling. Rechargeable power: Built-in 3.7 V, 700 mAh rechargeable lithium battery. Use the HABOTEST HT616 to measure coating thickness on car paint and other supported substrates. Specifications Product type: Car paint coating thickness tester Resolution: Up to 0.1 micron Measurement methods: Single, continuous, single-point, and multi-point Data storage: 256 values, arranged as 8 groups of 32 Display: Large LCD with backlight and automatic flip function Battery: Built-in 3.7 V, 700 mAh rechargeable lithium battery Dimensions: Approximately 145 × 62 × 38 mm Packaging One package weight: 0.34 kg / 0.76 lb One package size: 18 × 9 × 7 cm / 7.09 × 3.54 × 2.76 in Quantity per carton: 40 pieces Carton weight: 15.00 kg / 33.07 lb Carton size: 46 × 28 × 39 cm / 18.11 × 11.02 × 15.35 in Container loading: 20GP: 530 cartons × 40 pieces = 21,200 pieces; 40HQ: 1,232 cartons × 40 pieces = 49,280 pieces Package Weight One Package Weight 0.34kgs / 0.76lb One Package Size 18cm * 9cm * 7cm / 7.09inch * 3.54inch * 2.76inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 46cm * 28cm * 39cm / 18.11inch * 11.02inch * 15.35inch Loading Container 20GP: 530 cartons * 40 pcs = 21200 pcs40HQ: 1232 cartons * 40 pcs = 49280 pcs
$99.70
-
BNC Male to Dual Crocodile Clip Oscilloscope Probe Cable
Connect an oscilloscope or other BNC-equipped test equipment to two contact points with this BNC male to dual crocodile clip cable. The 0.5 m, 1 m, or 1.5 m cable uses a BNC male plug and two alligator clips for practical testing and signal connection. The cable has a PVC cover and a 3C-2V cable model. Selected pure copper is used for the BNC-to-crocodile clip connection, with corrosion prevention and stable transmission performance. The crocodile clips provide strong clamping force to help prevent slipping during use. Connector: One BNC male plug and two alligator clips. Construction: PVC cable cover with selected pure copper connection components. Testing: Each product undergoes multiple tests before leaving the factory. This oscilloscope probe cable is designed for connecting BNC equipment to two test points during electrical testing. Specifications Cable model: 3C-2V Cable specification: 23/0.10BC × 1C + AL + 48/0.12ACS, outer diameter 5.0 mm Cable cover: PVC eco-friendly material Plug specification: BNC male + 2 alligator clips Available lengths: 0.5 m, 1 m, and 1.5 m Packaging One package weight: 0.06 kg / 0.14 lb One package size: 16 × 4 × 2 cm / 6.3 × 1.57 × 0.79 in Quantity per carton: 360 pieces Carton weight: 17.30 kg / 38.14 lb Carton size: 50 × 34 × 32 cm / 19.69 × 13.39 × 12.6 in 20GP loading: 490 cartons × 360 pieces = 176,400 pieces 40HQ loading: 1,137 cartons × 360 pieces = 409,320 pieces Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 16cm * 4cm * 2cm / 6.3inch * 1.57inch * 0.79inch Qty per Carton 360 Carton Weight 17.30kgs / 38.14lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 360 pcs = 176400 pcs40HQ: 1137 cartons * 360 pcs = 409320 pcs
$19.48 - $19.92
-
FNIRSI DSO-TC4 3 In 1 Oscilloscope Transistor Tester
Measure waveforms, identify components, and generate test signals with the FNIRSI DSO-TC4 3-in-1 oscilloscope transistor tester. Its 10 MHz analog bandwidth and 48 MSa/s real-time sampling rate capture waveform details for electronic testing and analysis. The tester identifies diodes, Zener diodes, thyristors, capacitors, resistors, inductors, transistors, and MOSFETs. It also provides 13 waveform outputs, with adjustable frequency, duty cycle, and amplitude. Built-in anti-burn protection supports safer measurement, while the 2.8-inch TFT color screen and adjustable backlight make readings easier to view. Portable power: The 3.7V 1500mAh lithium-ion battery charges through Type-C and supports automatic sleep mode. PC connection: Share waveform data through USB for management and secondary analysis. Included tools: The kit includes an oscilloscope probe, normal probe, test hooks, adaptor, and Type-C charging cable. Use the FNIRSI DSO-TC4 for portable oscilloscope measurement, component identification, and signal generation. Specifications Product type: 3-in-1 oscilloscope, transistor tester, and signal generator Screen: 2.8-inch TFT color screen Backlight: Adjustable brightness Power supply: Type-C, 5V/1A Battery: 3.7V, 1500mAh lithium-ion Languages: Chinese, English, German, Portuguese, Spanish, Japanese, Russian, and Korean Dimensions: Approximately 90 × 142 × 27.5mm Weight: Approximately 186g Sampling rate: 48 MSa/s real-time Analog bandwidth: 10MHz Input impedance: 1 megohm Coupling: AC/DC Test voltage: 1:1 probe, 80Vpp (+40V); 10:1 probe, 800Vpp (+400V) Vertical sensitivity: 10mV/div–10V/div, X1 gear Vertical displacement: Adjustable with indication level Horizontal time base: 50ns–20s Trigger modes: Automatic, normal, and single Trigger types: Rising edge and falling edge Trigger level: Adjustable with indication Waveform freeze: Yes, HOLD function Component Testing Diode: Forward voltage drop below 5V Voltage regulator diode: 0–32V Field-effect tube: JFET, IGBT, and MIOSTET Unidirectional thyristor: Turn-on voltage below 5V; gate level Bidirectional thyristor: Trigger current below 6mA Capacitance: 25pF–1000uF Resistance: 0.01 ohm–50 megohm Inductance: 10uH–1000uH Signal Generator Output: 13 waveform types Frequency: 0–50KHz Square-wave duty cycle: 0–100% Waveform amplitude: 0.1V–3.0V Package Contents DSO-TC4 tester × 1 P1600 oscilloscope probe × 1 Adaptor × 1 Type-C charging cable × 1 Normal probe × 1 Test hook × 3 Packaging One package weight: 0.42kg / 0.93lb One package size: 21 × 11 × 7cm / 8.27 × 4.33 × 2.76inch Quantity per carton: 50 pieces Carton weight: 22.20kg / 48.94lb Carton size: 55 × 44 × 35cm / 21.65 × 17.32 × 13.78inch 20GP loading: 314 cartons × 50 pieces = 15,700 pieces 40HQ loading: 730 cartons × 50 pieces = 36,500 pieces Package Weight One Package Weight 0.42kgs / 0.93lb One Package Size 21cm * 11cm * 7cm / 8.27inch * 4.33inch * 2.76inch Qty per Carton 50 Carton Weight 22.20kgs / 48.94lb Carton Size 55cm * 44cm * 35cm / 21.65inch * 17.32inch * 13.78inch Loading Container 20GP: 314 cartons * 50 pcs = 15700 pcs40HQ: 730 cartons * 50 pcs = 36500 pcs
$98.45
-
Mingzheng Coating Thickness Gauge For Iron Aluminum Zinc
Measure coating thickness on iron, aluminum, and zinc substrates with the Mingzheng Coating Thickness Gauge. Its high-precision probe automatically identifies the substrate type, while zero-point and multi-point calibration support measurement setup. The gauge measures from 0 to 1500 µm and delivers 3–5 readings per second for efficient testing. A high-definition backlit display helps you read results in dark places. Its compact 124 × 31 × 23 mm body weighs 60 g, making it convenient to carry during inspections. Flexible use: Operates in temperatures from -20°C to 40°C. Curved surfaces: Supports convex curvature radii from 1.5 mm and concave curvature radii from 25 mm. Practical controls: High-grade silicon buttons are wear-resistant and durable. Power: Uses two AAA batteries, not included. Use this portable coating thickness gauge for measuring coatings on iron, aluminum, and zinc substrates. Specifications Product type: Coating thickness gauge Applicable substrates: Iron, aluminum, and zinc Measuring range: 0–1500 µm Calibration: Zero-point calibration and multi-point calibration Probe: High-precision probe with automatic substrate identification Test speed: 3–5 times per second Display: High-definition backlit display Convex curvature radius: 1.5 mm minimum Concave curvature radius: 25 mm minimum Measuring area diameter: 6 mm minimum Substrate thickness: 0.5 mm; 0.3 mm minimum Operating temperature: -20°C to 40°C Battery: 2 × AAA, not included Dimensions: 124 × 31 × 23 mm Weight: 60 g Packaging Individual package weight: 0.19 kg / 0.43 lb Individual package size: 18 × 10 × 6 cm / 7.09 × 3.94 × 2.36 in Quantity per carton: 30 pieces Carton weight: 6.80 kg / 14.99 lb Carton size: 38 × 32 × 32 cm / 14.96 × 12.6 × 12.6 in 20GP loading: 685 cartons × 30 pieces = 20,550 pieces 40HQ loading: 1,590 cartons × 30 pieces = 47,700 pieces Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 30 Carton Weight 6.80kgs / 14.99lb Carton Size 38cm * 32cm * 32cm / 14.96inch * 12.6inch * 12.6inch Loading Container 20GP: 685 cartons * 30 pcs = 20550 pcs40HQ: 1590 cartons * 30 pcs = 47700 pcs
$102.23
-
HABOTEST HT628B EMF Meter Electromagnetic Radiation Tester
Measure electromagnetic radiation with the HABOTEST HT628B EMF Meter. Its built-in electromagnetic radiation sensor and microcontroller processor provide quick readings of electric fields, magnetic fields, and high-frequency signals. For magnetic field testing, X/Y/Z signal detection combines readings from the actual field strength for sensitive measurement. The large-font display makes results easier to read, while sound and light alerts notify you when the set alarm value is exceeded. Colour alerts: The screen turns green below 0.12 µT (12 mg), orange below 0.40 µT (4.0 mG), and red at or above 0.40 µT (4.0 mG). Rechargeable power: USB lithium battery charging eliminates the need to replace batteries. Design: The meter has a soft hand feel and is waterproof, dustproof, environmentally friendly, and easy to clean. Use this handheld EMF meter for clear, convenient electromagnetic radiation readings. Specifications Brand: HABOTEST Model: HT628B Detection: Electric field, magnetic field, and high-frequency detection Magnetic field sensing: X/Y/Z signal detection Charging: USB lithium battery direct charging Product size: 142 × 72 × 26 mm Product weight: Approximately 150 g Packaging One package weight: 0.31 kg / 0.69 lb One package size: 20 × 12 × 7 cm / 7.87 × 4.72 × 2.76 in Quantity per carton: 50 pieces Carton weight: 16.60 kg / 36.60 lb Carton size: 52 × 33 × 38 cm / 20.47 × 12.99 × 14.96 in Container loading: 20GP: 408 cartons × 50 pieces = 20,400 pieces; 40HQ: 949 cartons × 50 pieces = 47,450 pieces Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 20cm * 12cm * 7cm / 7.87inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 16.60kgs / 36.60lb Carton Size 52cm * 33cm * 38cm / 20.47inch * 12.99inch * 14.96inch Loading Container 20GP: 408 cartons * 50 pcs = 20400 pcs40HQ: 949 cartons * 50 pcs = 47450 pcs
$70.63
-
ET827 Oscilloscope Multimeter 40MHz 200Msps 2 In 1
Measure circuit waveforms and electrical values with the ET827 Oscilloscope Multimeter, a handheld 2-in-1 test instrument for research, production, debugging, and maintenance. Its oscilloscope provides 40MHz analog bandwidth, up to 200Msps real-time sampling, waveform storage, cursor measurements, and automatic readings. The integrated multimeter measures AC/DC voltage and current, resistance, capacitance, frequency, temperature, diode response, and transistor hFE. The 240 × 160 pixel LCD has a white backlight for viewing the interface, while automatic shutdown activates after 15 minutes without operation. You can store up to 100 data sets and 50 waveforms. The compact 210g body measures approximately 8.3 × 16 × 3.2cm and uses three AA batteries, which are not included. Use the ET827 for combined waveform analysis and electrical testing in a compact handheld format. Specifications General Display: 240 × 160 pixel LCD. Backlight: White backlight. Display area: Approximately 6 × 4cm. Input impedance: 10 megohms. Power: Three AA batteries, not included. Automatic power-off: After 15 minutes without operation. Storage: 100 data sets and 50 waveforms. Dimensions: Approximately 8.3 × 16 × 3.2cm. Weight: Approximately 210g. Oscilloscope Analog bandwidth: 40MHz. Maximum real-time sampling rate: 200Msps. Vertical resolution: 8 bits. Coupling: AC/DC. Sweep modes: Auto, normal, and single. Record length: 24.0 div. Vertical sensitivity: 500mV/div–200V/div. Vertical amplitude accuracy: ±(5% + 0.2div). Scale: Vertical ±6.0; horizontal 24.0. Automatic zero reference: DC measurement. Time base: 12.5ns/div–10s/div. Cursor measurements: dV and dt. Time base accuracy: ±(0.01% + 0.1div). Trigger slope: Rising edge and falling edge. Automatic measurements: Peak-to-peak, average, and effective values. Automatic measurement accuracy: ±(5% + 0.2div). Highest measurable waveform voltage: 700V. Multimeter Display: 6000-count. DC voltage: 600mV–1000V; ±(0.75%rdg + 10dgt). AC voltage: 600mV–750V TRMS; ±(1.0%rdg + 10dgt). DC current: 60mA–500mA and 6A–10A; ±(1.2%rdg + 10dgt). AC current: 60mA–500mA and 6A–10A TRMS; ±(1.5%rdg + 10dgt). Resistance: 600.0 ohms–60.00 megohms; ±(1.0% reading + 5 digits). Capacitance: 9.999nF–99.99mF; ±(2% reading + 10 digits). Frequency: 9.999Hz–9.999MHz; ±(1.0% reading + 5 digits). Temperature: −20°C–250°C; ±(2% reading + 10 digits). Transistor test: hFE. Diode test: 3V open-circuit voltage; 2mA maximum test current. Switch test: Approximately 50-ohm resistance judgment. Fuses: 500mA/250V and 10A/250V. Functions: True RMS, relative measurement, automatic/manual range, backlight, automatic shutdown, and data storage. Operating Conditions Operating environment: 0–40°C; less than 75% RH. Storage environment: −10–60°C; less than 90% RH. Packaging Individual package weight: 0.42kg / 0.93lb. Individual package size: 21 × 16 × 6cm / 8.27 × 6.3 × 2.36in. Quantity per carton: 35 pieces. Carton weight: 15.80kg / 34.83lb. Carton size: 47 × 40 × 32cm / 18.5 × 15.75 × 12.6in. 20GP loading: 443 cartons × 35 pieces = 15,505 pieces. 40HQ loading: 1,029 cartons × 35 pieces = 36,015 pieces. Package Weight One Package Weight 0.42kgs / 0.93lb One Package Size 21cm * 16cm * 6cm / 8.27inch * 6.3inch * 2.36inch Qty per Carton 35 Carton Weight 15.80kgs / 34.83lb Carton Size 47cm * 40cm * 32cm / 18.5inch * 15.75inch * 12.6inch Loading Container 20GP: 443 cartons * 35 pcs = 15505 pcs40HQ: 1029 cartons * 35 pcs = 36015 pcs
$111.04
-
HW-710 5-in-1 Wall Scanner Stud Finder Metal Detector
Find hidden wood, metal, and AC wires before mounting TVs, cabinets, or garage racks. The HW-710 5-in-1 Wall Scanner Stud Finder Metal Detector gives you five scanning modes for checking walls, floors, and ceilings around your home. Stud detection: Scan at 1/2-inch (13 mm), 1-inch (25 mm), or 3/2-inch (38 mm) depth settings. Metal detection: Locate metal at a depth of 3.2 inches (38 mm). AC detection: Detect AC wires up to 2 inches (51 mm) deep. Versatile use: Works on laths, wallpaper, wooden floors, soundproof ceilings, and painted walls. Use this wall scanner to identify concealed materials before beginning installation work. It is powered by one 9V 6F22 battery, which is not included. The HW-710 helps you check surfaces before installing fixtures and equipment around your home. Specifications Product type: 5-in-1 wall scanner, stud finder, and metal detector Stud modes: 1/2 inch (13 mm), 1 inch (25 mm), and 3/2 inch (38 mm) Metal mode depth: 3.2 inches (38 mm) AC mode depth: 2 inches (51 mm) Detects: Wood, metal, and AC wires Product size: 15 × 6.7 × 3 cm Battery: 1 × 9V 6F22 battery, not included Gross weight: 170 g Packaging One package weight: 0.17 kg / 0.38 lb One package size: 18 × 8 × 5 cm / 7.09 × 3.15 × 1.97 inches Quantity per carton: 100 pieces Carton weight: 18.00 kg / 39.68 lb Carton size: 38 × 40 × 45 cm / 14.96 × 15.75 × 17.72 inches 20GP loading: 389 cartons × 100 pieces = 38,900 pieces 40HQ loading: 905 cartons × 100 pieces = 90,500 pieces Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 18cm * 8cm * 5cm / 7.09inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 18.00kgs / 39.68lb Carton Size 38cm * 40cm * 45cm / 14.96inch * 15.75inch * 17.72inch Loading Container 20GP: 389 cartons * 100 pcs = 38900 pcs40HQ: 905 cartons * 100 pcs = 90500 pcs
-
ZOYI VC921 Pocket Digital Multimeter Auto Ranging Tester
Measure electrical values wherever you work with the ZOYI VC921 pocket digital multimeter. Its 4000-count LCD and automatic or manual ranging help you read measurements clearly across a broad selection of ranges. The compact ABS tester weighs about 107g and measures approximately 12.5 × 8 × 1.95cm, making it suitable for portable testing. Use the ZOYI VC921 to measure DC and AC voltage, resistance, capacitance, frequency, and duty cycle. It also supports diode testing, buzzer switch measurement, true RMS, data retention, low-battery indication, and automatic shutdown. The meter samples three times per second and uses a 1.5V AAA battery, which is not included. Specifications Brand and model: ZOYI VC921 Display: LCD, 4000 counts Range selection: Automatic and manual Sampling rate: 3 times per second Voltage: DC/AC, 400.0mV to 600V; resolution from 0.1mV to 1V Resistance: 400.0Ω to 40.00MΩ; resolution from 0.1Ω to 0.01MΩ Capacitance: 9.999nF to 9.999mF; resolution from 0.001nF to 0.001mF Frequency: 99.99Hz to 9.999MHz; resolution from 0.01Hz to 0.001MHz Functions: True RMS, diode, buzzer switch, data retention, low-battery indication, automatic shutdown, frequency and duty-cycle measurement Material: ABS Power: 1.5V AAA battery, not included Working environment: 0–40°C; humidity below 75% Storage environment: −20–60°C; humidity below 80% Dimensions: Approximately 12.5 × 8 × 1.95cm Weight: Approximately 107g Additional design: Computer self-calibration Packaging One package: 0.15kg; 15 × 9 × 3cm Carton quantity: 100 units Carton: 16kg; 46 × 30 × 30cm Container loading: 20GP: 644 cartons, 64,400 units; 40HQ: 1,495 cartons, 149,500 units The ZOYI VC921 is designed for portable measurement of electrical and electronic values. Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 9cm * 3cm / 5.91inch * 3.54inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch Loading Container 20GP: 644 cartons * 100 pcs = 64400 pcs40HQ: 1495 cartons * 100 pcs = 149500 pcs
$29.50
-
Solar Power Radiation Meter With LCD Display 3999 Count
Measure solar radiation and light intensity with the SM206 Solar Power Radiation Meter. Its 3-3/4 LCD shows readings up to 3999 counts, with selectable W/㎡ and Btu/(ft²-h) units. The meter provides direct measurement without adjustment, plus peak hold and data hold functions for convenient reading. Use it for solar radiation measurement, solar research, physical and optical experiments, meteorology, agriculture, glass light-intensity testing, and car-film or window light-intensity measurement. A 0.25-second sampling time supports quick readings, while the compact 132 × 60 × 38 mm design weighs about 150 g. The SM206 is designed for measuring light intensity across indoor and outdoor applications. Specifications Model: SM206 Product type: Solar power radiation meter Display: 3-3/4 LCD display Display count: 3999 Resolution: 0.1 W/㎡; 0.1 Btu/(ft²-h) Measurement ranges: 0.1–399.9 W/㎡, 1–3999 W/㎡, 0.1–399.9 Btu/(ft²-h), 1–3999 Btu/(ft²-h) Units: W/㎡ and Btu/(ft²-h) Range error: 10 W/㎡ [3 Btu/(ft²-h)] or 5% of measured value Temperature error: 0.38 W/㎡/℃ [0.12 Btu/(ft²-h)/℃] when deviating from 25℃ Sampling time: 0.25 seconds per measurement Functions: Peak hold, data hold, direct measurement without adjustment Overload display: “OL” Operating conditions: 0°C to 50°C; less than 80% RH Storage conditions: −10°C to 60°C; less than 70% RH Battery: 9V battery, not included Battery life: About 100 hours Dimensions: 132 × 60 × 38 mm Weight: About 150 g Packaging One package weight: 0.30 kg / 0.67 lb One package size: 20 × 8 × 6 cm / 7.87 × 3.15 × 2.36 in Quantity per carton: 40 pieces Carton weight: 13.10 kg / 28.88 lb Carton size: 42 × 34 × 32 cm / 16.54 × 13.39 × 12.6 in Container loading: 20GP: 583 cartons × 40 pieces = 23,320 pieces; 40HQ: 1,354 cartons × 40 pieces = 54,160 pieces Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 20cm * 8cm * 6cm / 7.87inch * 3.15inch * 2.36inch Qty per Carton 40 Carton Weight 13.10kgs / 28.88lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 40 pcs = 23320 pcs40HQ: 1354 cartons * 40 pcs = 54160 pcs
$92.70
-
FNIRSI DPOS350P 4 In 1 350M 7 Inch Tablet Oscilloscope
Measure and review electrical signals with the FNIRSI DPOS350P 4-in-1 tablet oscilloscope. Its 7-inch IPS capacitive touchscreen displays measurements at 1024 × 600 resolution with a full viewing angle. Two channels, 350 MHz analog bandwidth, and a maximum 1 GSPS sampling rate support detailed signal analysis. Choose automatic, single, or regular trigger modes. Automatic mode is mainly suited to periodic signals, while single and regular modes can capture burst signals. The built-in control algorithm identifies signal characteristics automatically, and the 1 Gbit internal storage lets you save signals for secondary analysis. Flexible measurement: Select 1X, 10X, or 100X probe magnification and use 12 parameter measurement types. Portable operation: The 3.7 V, 8000 mAh battery provides about three hours of standby time. USB functions: Export data and upgrade firmware through the USB transmission interface. With its high-voltage design, the oscilloscope can withstand more than 400 V at any gear without burning. It is suited to signal measurement, capture, and analysis in a portable tablet format. Specifications Brand and model: FNIRSI DPOS350P Product type: 4-in-1 tablet oscilloscope Channels: 2 Analog bandwidth: 350 MHz Hardware bandwidth limit: 150 MHz / 20 MHz Maximum sampling rate: 1 GSPS High-resolution mode: 8-bit–16-bit Storage depth: 60 Kpts Internal storage: 1 Gbit Trigger modes: Automatic, single, and regular Parameter measurement: 12 types Screen: 7-inch IPS capacitive touchscreen Screen resolution: 1024 × 600 Supported languages: Chinese, English, Russian, and Portuguese Probe magnification: 1X / 10X / 100X Battery: 3.7 V / 8000 mAh Standby time: About 3 hours Charging time: About 5 hours Charging requirements: QC18W, 12 V / 1.5 A Power consumption: 10 W Heat dissipation: Air cooling Expansion interface: USB transmission interface Voltage withstand: More than 400 V at any gear without burning Packaging One package weight: 1.60 kg / 3.54 lb One package size: 25 × 20 × 10 cm / 9.84 × 7.87 × 3.94 in Quantity per carton: 12 pieces Carton weight: 20.20 kg / 44.53 lb Carton size: 52 × 42 × 32 cm / 20.47 × 16.54 × 12.6 in 20GP loading: 381 cartons × 12 pieces = 4,572 pieces 40HQ loading: 885 cartons × 12 pieces = 10,620 pieces Package Weight One Package Weight 1.60kgs / 3.54lb One Package Size 25cm * 20cm * 10cm / 9.84inch * 7.87inch * 3.94inch Qty per Carton 12 Carton Weight 20.20kgs / 44.53lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 12 pcs = 4572 pcs40HQ: 885 cartons * 12 pcs = 10620 pcs
$398.46
-
FNIRSI DSO510 Handheld Digital Portable Oscilloscope 10MHz
Take measurements with the FNIRSI DSO510 handheld digital oscilloscope wherever your work takes you. Its 10 MHz bandwidth and 48 MS/s sampling rate support signal testing for maintenance, work, and DIY projects. The compact design weighs 0.29 kg per package and is easy to carry when bench space is limited. The 2.8-inch display shows readings at 320 × 240 resolution. Adjust vertical sensitivity from 10 mV/Div to 10 V/Div, or set the time base from 50 ns to 20 s. Automatic, normal, and single trigger modes help you select the measurement approach you need. Waveform support: Includes 13 adjustable built-in waveforms. Measurement range: Frequency from 0 to 50 kHz and duty cycle from 0 to 100% for rectangular and sawtooth waves. Storage: Save important measurement moments in high definition, then share or export pictures through USB. Power: Uses a 1000 mAh battery and supports 5 V/1 A USB charging. The FNIRSI DSO510 is a portable oscilloscope for signal measurement, maintenance, and DIY use. Specifications Brand: FNIRSI Model: DSO510 Product type: Handheld digital portable oscilloscope Bandwidth: 10 MHz Sampling rate: 48 MS/s Vertical sensitivity: 10 mV/Div–10 V/Div Time base range: 50 ns–20 s Voltage range: -+40 V/-+400 V Trigger modes: Automatic, normal, single Frequency range: 0–50 kHz Duty cycle: 0–100% for rectangular and sawtooth waves Amplitude: 0.1–3.0 V Display: 2.8 inches Resolution: 320 × 240 Battery capacity: 1000 mAh USB charging: 5 V/1 A Built-in waveforms: 13 adjustable waveforms USB functions: Sharing and picture export Packaging One package weight: 0.29 kg / 0.65 lb One package size: 21 × 11 × 5 cm / 8.27 × 4.33 × 1.97 in Quantity per carton: 60 pieces Carton weight: 18.40 kg / 40.56 lb Carton size: 57 × 44 × 32 cm / 22.44 × 17.32 × 12.6 in 20GP loading: 332 cartons × 60 pieces = 19,920 pieces 40HQ loading: 771 cartons × 60 pieces = 46,260 pieces Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 21cm * 11cm * 5cm / 8.27inch * 4.33inch * 1.97inch Qty per Carton 60 Carton Weight 18.40kgs / 40.56lb Carton Size 57cm * 44cm * 32cm / 22.44inch * 17.32inch * 12.6inch Loading Container 20GP: 332 cartons * 60 pcs = 19920 pcs40HQ: 771 cartons * 60 pcs = 46260 pcs
$73.45
-
FNIRSI DST210 3 in 1 Digital Multimeter Oscilloscope
Measure electrical values and view signal behavior with the FNIRSI DST210 3-in-1 digital multimeter oscilloscope. Its 2.8-inch TFT color screen uses adjustable backlight brightness for a clearer view during testing. The oscilloscope provides a 48 MSa/second real-time sampling rate, 10 MHz analog bandwidth, and a 1 MΩ input impedance. Adjust vertical sensitivity from 10 mV/div to 10 V/div, set the horizontal time base from 50 ns to 20 s, and choose Auto, Normal, or Single triggering. The adjustable vertical displacement includes an indicator. Waveform output supports frequencies from 0 to 50 kHz, with square and sawtooth waveforms adjustable across a 0–100% square-wave duty cycle. With a 3000 mAh battery and 5V/1A charging power, this handheld instrument is designed for electrical measurement and waveform testing. Specifications Product type: 3-in-1 digital multimeter oscilloscope Screen: 2.8-inch TFT color screen Backlight: Adjustable brightness Charging power: 5V/1A Battery capacity: 3000 mAh DC voltage ranges: 1.9999V, 19.99V, and 1000V Real-time sampling rate: 48 MSa/second Analog bandwidth: 10 MHz Input impedance: 1 MΩ Test voltage range: 80 Vpp–800 Vpp Vertical sensitivity: 10 mV/div–10 V/div Vertical displacement: Adjustable with indicator Horizontal time base: 50 ns–20 s Trigger modes: Auto, Normal, and Single Output waveform: 0–50 kHz Square duty cycle: 0–100% Adjustable waveforms: Square and sawtooth Packaging One package weight: 0.62 kg / 1.38 lb One package size: 20 × 11 × 9 cm / 7.87 × 4.33 × 3.54 in Quantity per carton: 40 pieces Carton weight: 25.80 kg / 56.88 lb Carton size: 57 × 42 × 38 cm / 22.44 × 16.54 × 14.96 in 20GP loading: 293 cartons × 40 pieces = 11,720 pieces 40HQ loading: 680 cartons × 40 pieces = 27,200 pieces Package Weight One Package Weight 0.62kgs / 1.38lb One Package Size 20cm * 11cm * 9cm / 7.87inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 25.80kgs / 56.88lb Carton Size 57cm * 42cm * 38cm / 22.44inch * 16.54inch * 14.96inch Loading Container 20GP: 293 cartons * 40 pcs = 11720 pcs40HQ: 680 cartons * 40 pcs = 27200 pcs
$84.04
-
FNIRSI DST201 3 In 1 Digital Multimeter Oscilloscope
Measure electrical signals and inspect waveforms with the FNIRSI DST201 3-in-1 digital multimeter oscilloscope. Its 2.8-inch TFT color screen uses adjustable backlight brightness for viewing the display during testing. The unit supports DC voltage measurements up to 1000V, along with oscilloscope functions for analyzing signal timing, sensitivity, triggering, and waveform output. Use the adjustable vertical displacement and horizontal time base to set up waveform views for different tests. Auto, Normal, and Single trigger modes provide three ways to capture signal activity. The built-in 3000mAh battery charges at 5V/1A for portable operation. The FNIRSI DST201 is designed for electrical measurement and waveform testing in one handheld instrument. Specifications Product type: 3-in-1 digital multimeter oscilloscope Display: 2.8-inch TFT color screen Backlight: Adjustable brightness Battery capacity: 3000mAh Charging power: 5V/1A DC voltage ranges: 1.9999V, 19.99V, and 1000V Real-time sampling rate: 5MSa/second Analog bandwidth: 1MHz Input impedance: 1M Test voltage range: 80Vpp–800Vpp Vertical sensitivity: 10mV/div–10V/div Vertical displacement: Adjustable with indicator Horizontal time base: 500ns–20s Trigger modes: Auto, Normal, and Single Output waveform frequency: 0–10KHz Square duty cycle: 0–100% Waveform adjustment: Square and sawtooth adjustable Packaging One package weight: 0.62kg / 1.38lb One package size: 20cm × 11cm × 9cm / 7.87in × 4.33in × 3.54in Quantity per carton: 40 pieces Carton weight: 25.80kg / 56.88lb Carton size: 57cm × 42cm × 38cm / 22.44in × 16.54in × 14.96in 20GP loading: 293 cartons × 40 pieces = 11,720 pieces 40HQ loading: 680 cartons × 40 pieces = 27,200 pieces Package Weight One Package Weight 0.62kgs / 1.38lb One Package Size 20cm * 11cm * 9cm / 7.87inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 25.80kgs / 56.88lb Carton Size 57cm * 42cm * 38cm / 22.44inch * 16.54inch * 14.96inch Loading Container 20GP: 293 cartons * 40 pcs = 11720 pcs40HQ: 680 cartons * 40 pcs = 27200 pcs
$84.41
-
FNIRSI 2C53T Dual Channel 50M Digital Multimeter Type C
Measure, inspect, and generate signals with the FNIRSI 2C53T Dual Channel 50M Digital Multimeter Type C. It combines a digital multimeter, oscilloscope, and signal generator in one device. The 2.8-inch screen displays readings at 320 × 240 resolution. Dual-channel operation, 50 MHz analog bandwidth, and a 250 MS/s sampling rate support detailed waveform viewing. The 4.5-digit true RMS voltage measurement provides accurate readings with fast response. Intelligent anti-burn protection, overload protection, and a double-fuse internal resistance design help protect the meter during measurement. Oscilloscope controls: Choose automatic, normal, or single trigger modes. Signal generation: Set frequencies from 1 Hz to 10 kHz and amplitudes from 0.1 V to 3 V. Rechargeable power: The 3000 mAh battery provides up to 6 hours of standby time. Charging: Recharge through the Type-C interface. The FNIRSI 2C53T is designed for digital measurement, waveform analysis, and signal generation in one instrument. Specifications Model: FNIRSI 2C53T Functions: Oscilloscope, signal generator, digital multimeter Channels: Dual channel Display: 2.8-inch screen, 320 × 240 resolution Analog bandwidth: 50 MHz Sampling rate: 250 MS/s Time base range: 10 ns–20 s Horizontal time base: 500 ns–20 s Vertical sensitivity: 10 mV/div–10 V/div Vertical displacement: Adjustable with indicator Trigger modes: Automatic, normal, single Frequency range: 1 Hz–10 kHz Amplitude: 0.1–3 V Voltage measurement: 4.5-digit true RMS Protection: Intelligent anti-burn, overload protection, double-fuse internal resistance Battery capacity: 3000 mAh Standby time: 6 hours Charging interface: Type-C Package Contents Standard version: One 10× probe High-end version: Two 10× probes Packaging One package weight: 0.85 kg / 1.88 lb One package size: 22 × 14 × 10 cm / 8.66 × 5.51 × 3.94 in Quantity per carton: 24 pcs Carton weight: 21.40 kg / 47.18 lb Carton size: 58 × 46 × 32 cm / 22.83 × 18.11 × 12.6 in 20GP loading: 312 cartons × 24 pcs = 7,488 pcs 40HQ loading: 725 cartons × 24 pcs = 17,400 pcs Package Weight One Package Weight 0.85kgs / 1.88lb One Package Size 22cm * 14cm * 10cm / 8.66inch * 5.51inch * 3.94inch Qty per Carton 24 Carton Weight 21.40kgs / 47.18lb Carton Size 58cm * 46cm * 32cm / 22.83inch * 18.11inch * 12.6inch Loading Container 20GP: 312 cartons * 24 pcs = 7488 pcs40HQ: 725 cartons * 24 pcs = 17400 pcs
$129.28 - $133.61
-
FNIRSI GC-02 Personal Radiation Detector With Alarm
Monitor ionizing radiation with the FNIRSI GC-02 Personal Radiation Detector. Its energy-compensated GM tube detects gamma, X-ray, and beta radiation across a 48 keV to 15 MeV energy range. The 1.5-inch color IPS display shows real-time, average, maximum, and cumulative dose values. It also displays a histogram and battery status, helping you review measurements at a glance. Set dose-rate or cumulative-dose thresholds for audible and visual alerts. Rechargeable power: The built-in 850 mAh lithium battery provides up to 6 hours of continuous use and charges through USB-C. Timed monitoring: Schedule measurements for planned monitoring sessions. History records: Save up to 10 historical measurement records. The FNIRSI GC-02 is designed for personal monitoring of gamma, X-ray, and beta radiation. Specifications Product type: Personal radiation detector with alarm Detection: Gamma, X-ray, and beta radiation Sensor: Energy-compensated GM tube Energy range: 48 keV to 15 MeV Sensitivity: 80 CPM/microsievert (Co-60) Real-time dose rate: 0.00 to 1000 microsievert/h Cumulative dose: Up to 500 mSv Display: 1.5-inch color IPS Alerts: Customizable audible and visual alarms Battery: Built-in 850 mAh lithium battery Charging: USB-C Continuous use: Up to 6 hours History: Up to 10 records Packaging One package weight: 0.14 kg / 0.32 lb One package size: 14 × 8 × 6 cm / 5.51 × 3.15 × 2.36 in Quantity per carton: 50 pieces Carton weight: 9.00 kg / 19.84 lb Carton size: 42 × 30 × 32 cm / 16.54 × 11.81 × 12.6 in 20GP loading: 661 cartons × 50 pieces = 33,050 pieces 40HQ loading: 1,535 cartons × 50 pieces = 76,750 pieces Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 14cm * 8cm * 6cm / 5.51inch * 3.15inch * 2.36inch Qty per Carton 50 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 30cm * 32cm / 16.54inch * 11.81inch * 12.6inch Loading Container 20GP: 661 cartons * 50 pcs = 33050 pcs40HQ: 1535 cartons * 50 pcs = 76750 pcs
$73.64
-
FNIRSI FNAC-28 USB Type-C Voltage Current Power Tester
Check USB charging performance with the FNIRSI FNAC-28 USB Type-C voltage, current and power tester. Its USB-A and USB Type-C dual interfaces support charger, cable and charging-device testing without an adapter. The tester measures voltage, current and power in real time, including bidirectional current through the Type-C interface. You can view voltage and current curves, detect cable resistance, read cables and perform simulated tests. Fast-charging protocol triggers support mainstream protocols with adjustable output voltage and automatic detection. Five data-record groups, power-outage memory and intelligent battery-capacity calculation help you continue monitoring with useful records. Display: 1.06-inch screen with adjustable brightness, custom standby time, temperature symbol switching and language switching. Interfaces: USB-A and USB Type-C dual male ports. Testing: Charger, data cable, power bank, laptop charging and interface performance testing. Modes: Real-time voltage and current curves, D+D− voltage curves and high-speed voltage and current curves. Additional functions: Analog DASH and analog Apple 2.4A. Specifications Brand: FNIRSI Model: FNAC-28 Voltage monitoring: 4–24 V; resolution 0.001 V; accuracy ±(0.2% + 2) Current monitoring: 0–6.5 A; resolution 0.001 A; accuracy ±(0.2‰ + 2) Power monitoring: 0–156 W; resolution 0.001 W; accuracy ±(0.2‰ + 2) Response time: 1 second Dimensions: 73 × 36 × 12 mm ADC: 16-bit ADC chip Memory: Five groups of data records with power-outage memory Packaging Individual package weight: 0.07 kg / 0.16 lb Individual package size: 12 × 6 × 4 cm / 4.72 × 2.36 × 1.57 in Quantity per carton: 150 pieces Carton weight: 11.50 kg / 25.35 lb Carton size: 42 × 32 × 38 cm / 16.54 × 12.60 × 14.96 in Container loading: 20GP: 522 cartons × 150 pieces = 78,300 pieces; 40HQ: 1,212 cartons × 150 pieces = 181,800 pieces Use it to monitor charging voltage, current, power and cable performance across USB charging equipment. Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 12cm * 6cm * 4cm / 4.72inch * 2.36inch * 1.57inch Qty per Carton 150 Carton Weight 11.50kgs / 25.35lb Carton Size 42cm * 32cm * 38cm / 16.54inch * 12.6inch * 14.96inch Loading Container 20GP: 522 cartons * 150 pcs = 78300 pcs40HQ: 1212 cartons * 150 pcs = 181800 pcs
$41.64
-
Fnirsi CTG-20 Car Paint Coating Thickness Gauge Tester
Check vehicle paint coatings with the Fnirsi CTG-20 Car Paint Coating Thickness Gauge Tester. Its sensitive probe automatically identifies iron, aluminium, or zinc substrates and measures coating thickness in seconds. Tap the surface to take a reading, then review real-time, maximum, minimum, and average values. Wide measurement range: Measures coating thickness from 0 to 1400 µm with 0.1 µm resolution. Putty detection: Supports iron powder putty testing and provides a prompt during vehicle inspection. Flexible operation: Switch between µm and mil units, rotate the screen, and use zero-point or multi-point calibration. Portable design: The 115 × 48 × 18 mm body supports one-handed use and easy carrying. Rechargeable battery: The 600 mAh lithium battery provides up to 8 hours of use on one charge. Specifications Measuring range: 0–1400 µm Accuracy: ±3% + 2 µm Resolution: 0.1 µm Units: µm, mil Calibration: Zero-point and multi-point Minimum convex curvature radius: 5 mm Minimum concave curvature radius: 25 mm Minimum measurement area diameter: 20 mm Humidity: 20%–90% RH Data storage: Supported Automatic power-off: Supported; shuts down after 5 minutes without operation Size: 115 × 48 × 18 mm Packaging Individual package weight: 0.20 kg / 0.45 lb Individual package size: 19 × 8 × 5 cm / 7.48 × 3.15 × 1.97 in Quantity per carton: 50 pieces Carton weight: 11.00 kg / 24.25 lb Carton size: 42 × 40 × 27 cm / 16.54 × 15.75 × 10.63 in Container loading: 20GP: 587 cartons × 50 pieces = 29,350 pieces; 40HQ: 1,364 cartons × 50 pieces = 68,200 pieces Use the Fnirsi CTG-20 to measure vehicle paint coating thickness and support more informed car inspections. Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 50 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 40cm * 27cm / 16.54inch * 15.75inch * 10.63inch Loading Container 20GP: 587 cartons * 50 pcs = 29350 pcs40HQ: 1364 cartons * 50 pcs = 68200 pcs
$65.55
-
FNIRSI ERD-10 Electromagnetic Radiation Detector 4 in 1
Monitor electric, magnetic and RF radiation levels with the FNIRSI ERD-10 Electromagnetic Radiation Detector 4 in 1. Its built-in temperature sensor also provides an ambient temperature reading, giving you four measurement functions in one compact device. The 2.4-inch colour display shows readings clearly, while adjustable brightness helps you set the screen to your preference. Use the data-hold function to keep a measurement visible, or switch to curve recording mode to view radiation-level changes over a defined time interval. Adjustable thresholds: Default limits are 40 V/m for electric fields and 0.4 microtesla for magnetic fields. Portable design: Measures 143 × 68 × 29 mm and weighs 143 g. Simple operation: Includes an intuitive menu and English/Chinese interface. Rechargeable power: Uses a built-in 1000 mAh battery with USB-C 5 V/1 A charging. Use the FNIRSI ERD-10 to measure and track electromagnetic radiation levels in a portable format. Specifications Product type: Electromagnetic radiation detector Measurement functions: Electric field, magnetic field, RF power and ambient temperature Electric field range: 1–1999 V/m Electric field accuracy: ±1 V/m Magnetic field range: 0.1–1999 mG RF power range: 0.2–1000 μW/cm² Display: 2.4-inch colour display Display features: Adjustable brightness and data hold Recording mode: Switchable curve recording for displaying radiation-level fluctuations over a defined time interval Languages: English and Chinese Dimensions: 143 × 68 × 29 mm Device weight: 143 g Battery: Built-in 1000 mAh battery Charging: USB-C, 5 V/1 A Packaging One-package weight: 0.26 kg / 0.58 lb One-package size: 22 × 10 × 5 cm / 8.66 × 3.94 × 1.97 in Quantity per carton: 50 pcs Carton weight: 14.00 kg / 30.86 lb Carton size: 52 × 46 × 27 cm / 20.47 × 18.11 × 10.63 in 20GP loading: 412 cartons × 50 pcs = 20,600 pcs 40HQ loading: 958 cartons × 50 pcs = 47,900 pcs Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 22cm * 10cm * 5cm / 8.66inch * 3.94inch * 1.97inch Qty per Carton 50 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 46cm * 27cm / 20.47inch * 18.11inch * 10.63inch Loading Container 20GP: 412 cartons * 50 pcs = 20600 pcs40HQ: 958 cartons * 50 pcs = 47900 pcs
$63.07
-
FNIRSI 4 In 1 Indoor Air Quality Monitor HCHO TVOC
Monitor indoor air conditions with the FNIRSI 4 In 1 Indoor Air Quality Monitor. It provides real-time HCHO and TVOC detection, helping you review air quality as conditions change. Audible and visual alerts activate when preset thresholds are exceeded, including 0.08 mg/m³ for HCHO and 0.30 mg/m³ for TVOC. The monitor displays formaldehyde safety across five grades, along with temperature, humidity, and the real-time clock. Review recorded data for trend analysis, calculate spatial averages across monitored spaces, and estimate remediation time, cost, and materials based on room size. Display: 2.4-inch HD tempered-glass screen with adjustable backlight. Portable design: Compact, lightweight body measuring 75 × 45 × 95 mm. Battery: Built-in 1,000 mAh lithium battery with 8–10 hours of runtime. Charging: USB-C fast charging at 5 V/2 A, with a full charge in approximately 1.5 hours. Operation: Supports use while charging. Specifications Detection: HCHO and TVOC HCHO sensor: Electrochemical TVOC sensor: Semiconductor Alerts: Audible and visual Data functions: Past-data recording, spatial averages, and remediation estimates Package weight: 0.29 kg / 0.65 lb Package size: 15 × 10 × 5 cm / 5.91 × 3.94 × 1.97 in Packaging Quantity per carton: 50 pieces Carton weight: 15.50 kg / 34.17 lb Carton size: 52 × 27 × 32 cm / 20.47 × 10.63 × 12.6 in 20GP loading: 593 cartons × 50 pieces = 29,650 pieces 40HQ loading: 1,377 cartons × 50 pieces = 68,850 pieces Use this indoor air quality monitor to track HCHO, TVOC, temperature, and humidity in monitored spaces. Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 50 Carton Weight 15.50kgs / 34.17lb Carton Size 52cm * 27cm * 32cm / 20.47inch * 10.63inch * 12.6inch Loading Container 20GP: 593 cartons * 50 pcs = 29650 pcs40HQ: 1377 cartons * 50 pcs = 68850 pcs
$86.61
-
Digital High Frequency Electromagnetic Radiation Detector S8602
Check electric field, magnetic field, and temperature readings with the Digital High Frequency Electromagnetic Radiation Detector S8602. Its handheld design supports one-handed operation, making it suitable for home, office, outdoor, and industrial measurements. Use it to detect radiation from high-voltage lines and devices such as mobile phones, computers, televisions, and refrigerators. You can also measure the effect of radiation protective clothing and protective films. Press the Mode key to switch between electric field, magnetic field, and temperature functions. Alert thresholds: Sound and screen indications activate when electric field readings exceed 40 volts per metre or magnetic field readings exceed 0.4 microtesla. LCD display: Shows radiation value trends and includes a radiation evaluation function. Measurement views: Press the Range key to switch between average, MAX, and MIN readings. The S8602 is designed for portable radiation detection and on-site measurement. Specifications Functions: Electric field, magnetic field, and temperature detection Electric field alarm threshold: 40 volts per metre Magnetic field alarm threshold: 0.4 microtesla Display: LCD screen with radiation trend and evaluation functions Measurement readings: Average, MAX, and MIN Product dimensions: 152 × 52 × 26.5 mm Battery requirement: 3 × AAA 1.5 V batteries Battery note: Batteries not included Suggested environments: Home, office, outdoor, and industrial environments Packaging One package weight: 0.11 kg / 0.25 lb One package size: 18 × 7 × 5 cm / 7.09 × 2.76 × 1.97 in Quantity per carton: 150 pieces Carton weight: 16.40 kg / 36.16 lb Carton size: 53 × 42 × 32 cm / 20.87 × 16.54 × 12.6 in 20GP loading: 374 cartons × 150 pieces = 56,100 pieces 40HQ loading: 869 cartons × 150 pieces = 130,350 pieces Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 18cm * 7cm * 5cm / 7.09inch * 2.76inch * 1.97inch Qty per Carton 150 Carton Weight 16.40kgs / 36.16lb Carton Size 53cm * 42cm * 32cm / 20.87inch * 16.54inch * 12.6inch Loading Container 20GP: 374 cartons * 150 pcs = 56100 pcs40HQ: 869 cartons * 150 pcs = 130350 pcs
$29.12
-
S8607 Sound Level Meter Environmental Noise Detector 30-130dB
Measure environmental noise across homes, offices, classrooms, workshops, and other everyday spaces with the S8607 sound level meter. It covers a broad 30–130 dB measurement range and displays readings in 0.1 dB steps for detailed monitoring. The A-weighted frequency response suits ambient noise checks, including traffic, baby room, home theater, industrial, and office area noise. A windproof sponge around the microphone helps filter wind impact during sound collection. The backlit display supports convenient reading, while soft rubber buttons provide comfortable operation. Wide measurement range: Measures sound levels from 30 to 130 dB. Clear readings: Displays measurements with 0.1 dB resolution. Portable design: Measures 150 × 50 × 30 mm and weighs 81 g. The S8607 is designed for measuring A-weighted ambient noise in practical indoor and outdoor environments. Specifications Product type: Sound level meter and environmental noise detector Frequency response: 31.5 Hz–8 kHz Measurement range: 30–130 dB Accuracy: 1.5 dB, reference sound pressure calibration 94 dB at 1 kHz Display resolution: 0.1 dB Frequency weighting: A-weighted Battery: 15 V AAA × 3, not included Dimensions: 150 × 50 × 30 mm Net weight: 81 g Microphone: Windproof sponge design Controls: Soft rubber buttons Display: Backlit Packaging One package weight: 0.11 kg / 0.25 lb One package size: 18 × 7 × 5 cm / 7.09 × 2.76 × 1.97 in Quantity per carton: 150 pieces Carton weight: 19.50 kg / 42.99 lb Carton size: 49 × 42 × 37 cm / 19.29 × 16.54 × 14.57 in Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 18cm * 7cm * 5cm / 7.09inch * 2.76inch * 1.97inch Qty per Carton 150 Carton Weight 19.50kgs / 42.99lb Carton Size 49cm * 42cm * 37cm / 19.29inch * 16.54inch * 14.57inch Loading Container 20GP: 350 cartons * 150 pcs = 52500 pcs40HQ: 812 cartons * 150 pcs = 121800 pcs
$28.56
-
Multifunctional Wall Stud Wire And Metal Detector Tool
Find hidden wood studs, metal, and AC wiring before installing TVs, cabinets, garage racks, and other fixtures. This multifunctional wall scanner works across walls, floors, and ceilings, including lath, wallpaper, wood floors, soundproof ceilings, and painted walls. Choose from three wood-stud detection depths: 0.5, 1, or 1.5 inches. The detector also identifies metal and AC power. Sound and light alarms indicate results, while the bright LCD screen makes readings easy to view. Exposed AC power cords are clearly marked in all modes to help identify potential electrical hazards during installation. Powered by a 9V 6F22 battery, this compact detector is designed for quick checks around the home or workplace. Battery not included. Use it to locate materials hidden behind common wall, floor, and ceiling surfaces before drilling or mounting. Specifications Detection functions: Wood studs, metal, and AC wiring Wood detection depths: 0.5 inches, 1 inch, and 1.5 inches Alarm mode: Sound and light Display: Bright LCD screen Detection frequency: 1 MHz Operating range: 0–0.06 meters Operating voltage: 9V Battery: 9V 6F22; battery not included Applicable surfaces: Lath, wallpaper, wood floors, soundproof ceilings, painted walls, and more Product dimensions: 16.7 × 6.6 × 3.4 cm Packaging Individual package weight: 0.18 kg / 0.39 lb Individual package size: 20 × 9 × 6 cm / 7.87 × 3.54 × 2.36 inches Quantity per carton: 40 pieces Carton weight: 8.10 kg / 17.86 lb Carton size: 42 × 38 × 32 cm / 16.54 × 14.96 × 12.6 inches 20GP loading: 522 cartons × 40 pieces = 20,880 pieces 40HQ loading: 1,212 cartons × 40 pieces = 48,480 pieces Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 20cm * 9cm * 6cm / 7.87inch * 3.54inch * 2.36inch Qty per Carton 40 Carton Weight 8.10kgs / 17.86lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 40 pcs = 20880 pcs40HQ: 1212 cartons * 40 pcs = 48480 pcs
You have seen 840 out of 2185 products