Explore Syndmart's wide range of consumer electronics — from audio and home entertainment to smart home devices, power solutions, and specialty gadgets. Whether you're upgrading your living space or looking for the latest tech innovations, our consumer electronics department has everything you need to stay connected, entertained, and powered up.
Keep drilling dust contained with this 150mm electric drill dust cover. Made from stretchable, flexible silicone, it fits 150mm drill bits and supports cleaner drilling work. Its double-layer dust-proof design helps prevent dust from dropping while you operate the drill. The bearing transition design addresses heat and wear during electric drill use. A separate bearing replacement hole lets you replace that part independently. The ear-hole design suits various types of impact drills.
Flexible silicone: Stretchable construction fits around a 150mm drill bit.
Double-layer dust protection: Helps keep drilling dust from dropping.
Ceiling drilling support: Use iron wire to fix the cover when drilling overhead, so it does not rotate with the drill.
Hand-held use: Hold the cover by hand without worrying about the drill bit wearing it.
This silicone drill dust guard is designed for dust control during drilling, including overhead ceiling work. Specifications
Product type: Electric drill dust cover
Suitable drill bit: 150mm
Material: Silicone
Design: Double-layer dust-proof cover with bearing transition design
Replacement feature: Separate bearing replacement hole
Compatibility: Various types of impact drills
Product dimensions: 116 × 88 × 60mm
Product weight: 115g
Packaging
One package weight: 0.13kg / 0.30lb
One package size: 15 × 10 × 10cm / 5.91 × 3.94 × 3.94in
Quantity per carton: 224 pieces
Carton weight: 30.00kg / 66.14lb
Carton size: 50 × 50 × 60cm / 19.69 × 19.69 × 23.62in
20GP loading: 177 cartons × 224 pieces = 39,648 pieces
40HQ loading: 412 cartons × 224 pieces = 92,288 pieces
Package Weight
One Package Weight
0.13kgs / 0.30lb
One Package Size
15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch
Qty per Carton
224
Carton Weight
30.00kgs / 66.14lb
Carton Size
50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch
Loading Container
20GP: 177 cartons * 224 pcs = 39648 pcs40HQ: 412 cartons * 224 pcs = 92288 pcs
Keep drilling dust contained while using a 160mm drill bit with this silicone impact drill dust cover. Its stretchable, flexible silicone construction fits around the drilling area, while the double-layer dust-proof design helps prevent dust from escaping and makes operation easier. A bearing transition design supports smoother contact as the electric drill runs, with a separate replacement hole for the bearing. The ear-hole design suits various types of impact drills. When drilling a ceiling, secure the cover with iron wire so it does not rotate with the drill. You can also hold it by hand during use without worrying about the drill bit wearing through the cover. This 160mm silicone drill dust cover is designed to help control dust during impact drilling. Specifications
Product type: Silicone impact drill dust cover
Suitable drill bit size: 160mm
Material: Silicone
Design: Stretchable and flexible
Dust protection: Double-layer design
Bearing design: Bearing transition design with a separate bearing replacement hole
Drill compatibility: Various types of impact drills
Dimensions: 126 × 88 × 60mm
Weight: 120g
Usage Features
Ceiling drilling: Use iron wire to secure the cover and prevent rotation with the drill.
Hand-held operation: The cover can be held by hand during drilling.
Packaging
One package weight: 0.12kg / 0.27lb
One package size: 16 × 10 × 10cm / 6.3 × 3.94 × 3.94in
Quantity per carton: 242 pieces
Carton weight: 30.00kg / 66.14lb
Carton size: 50 × 50 × 60cm / 19.69 × 19.69 × 23.62in
20GP loading: 177 cartons × 242 pieces = 42,834 pieces
40HQ loading: 412 cartons × 242 pieces = 99,704 pieces
Package Weight
One Package Weight
0.12kgs / 0.27lb
One Package Size
16cm * 10cm * 10cm / 6.3inch * 3.94inch * 3.94inch
Qty per Carton
242
Carton Weight
30.00kgs / 66.14lb
Carton Size
50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch
Loading Container
20GP: 177 cartons * 242 pcs = 42834 pcs40HQ: 412 cartons * 242 pcs = 99704 pcs
For general isolation and protection, this disposable waterproof isolation suit provides breathable coverage in a comfort-fit design. It is made from SF nonwoven fabric, cut and sewn for single use.
Coverage: The longer zipper extends to the chin, covering the neck area.
Material: SF nonwoven fabric with good tensile strength.
Protection: Waterproof and breathable, with a thick construction and no odor.
Use: Non-sterile and intended for general isolation and protection.
Use this disposable isolation suit when you need single-use protective coverage for general isolation tasks. Specifications
Product type: Disposable isolation suit
Material: SF nonwoven fabric
Design: Comfort fit
Closure: Longer zipper extending to the chin
Features: Waterproof, breathable, thick, durable, odor-free, good tensile strength
Construction: Cut and sewn
Sterility: Non-sterile
Use: Single use
Packaging
Quantity per carton: 16 pieces
One package weight: 0.34 kg / 0.75 lb
One package size: 26 × 26 × 5 cm / 10.24 × 10.24 × 1.97 in
Carton weight: 6.80 kg / 14.99 lb
Carton size: 53 × 53 × 27 cm / 20.87 × 20.87 × 10.63 in
20GP loading: 351 cartons × 16 pieces = 5,616 pieces
40HQ loading: 816 cartons × 16 pieces = 13,056 pieces
Package Weight
One Package Weight
0.34kgs / 0.75lb
One Package Size
26cm * 26cm * 5cm / 10.24inch * 10.24inch * 1.97inch
Qty per Carton
16
Carton Weight
6.80kgs / 14.99lb
Carton Size
53cm * 53cm * 27cm / 20.87inch * 20.87inch * 10.63inch
Loading Container
20GP: 351 cartons * 16 pcs = 5616 pcs40HQ: 816 cartons * 16 pcs = 13056 pcs
Turn twist drills into a compact hand tool for small DIY drilling tasks. This mini hand drill chuck clamp fixture is made from copper and designed for use with twist drills on ABS board, aluminum sheet, and paper board. The collet design allows quick conversion to a drill bit, helping you move from setup to drilling with fewer steps. Its copper construction is described as durable, rust-proof, and wear-resistant for repeated DIY projects. Keep it in your workshop for creative builds, model work, and practical material drilling.
Material: Copper
Drill use: Compatible with twist drills
Suitable materials: ABS board, aluminum sheet, and paper board
Conversion: Quick conversion to drill bit
Purpose: DIY drilling and creative projects
This mini hand drill chuck clamp fixture is intended for drilling ABS board, aluminum sheet, and paper board with a twist drill. Specifications
Product type: Mini hand drill chuck clamp fixture
Material: Copper
Features: Durable, rust-proof, and wear-resistant
Application: DIY use
Packaging
Individual package weight: 0.08 kg / 0.19 lb
Individual package size: 10 × 5 × 3 cm / 3.94 × 1.97 × 1.18 inches
Quantity per carton: 240 pieces
Carton weight: 20.20 kg / 44.53 lb
Carton size: 42 × 32 × 32 cm / 16.54 × 12.6 × 12.6 inches
20GP loading: 620 cartons × 240 pieces = 148,800 pieces
40HQ loading: 1,439 cartons × 240 pieces = 345,360 pieces
Package Weight
One Package Weight
0.08kgs / 0.19lb
One Package Size
10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch
Qty per Carton
240
Carton Weight
20.20kgs / 44.53lb
Carton Size
42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch
Loading Container
20GP: 620 cartons * 240 pcs = 148800 pcs40HQ: 1439 cartons * 240 pcs = 345360 pcs
Remove residue from glass windows and other surfaces during building decoration or everyday household cleaning with this iron head scraper. Its steel blade is sharp on one side and blunt on the other, giving you a choice of cutting edge for the task. The blade is fitted with the blunt edge facing outward for shipping. To use the sharp edge, loosen the top screw with a screwdriver and turn the blade around. The screw-secured cutter head is simple to disassemble and holds firmly during use.
Steel construction: Forged steel provides a high-hardness scraper head.
Plastic handle: The handle is designed for a comfortable hold.
One-piece molding: The scraper head has a thickened design with a sharp cutting edge.
This scraper gives you a practical tool for glass window cleaning, building decoration, and household tasks. Specifications
Product type: Iron head scraper
Suitable uses: Glass windows, building decoration, and daily household use
Materials: Plastic and steel
Blade: Sharp on one side and blunt on the other
Blade adjustment: Reversible using a screwdriver
Fastening: Screw-fixed cutter head
Product dimensions: 160 × 100 mm
Packaging
One package weight: 0.10 kg / 0.23 lb
One package size: 18 × 12 × 4 cm / 7.09 × 4.72 × 1.57 in
Quantity per carton: 288 pieces
Carton weight: 30.00 kg / 66.14 lb
Carton size: 50 × 50 × 60 cm / 19.69 × 19.69 × 23.62 in
20GP loading: 177 cartons × 288 pieces = 50,976 pieces
40HQ loading: 412 cartons × 288 pieces = 118,656 pieces
Package Weight
One Package Weight
0.10kgs / 0.23lb
One Package Size
18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch
Qty per Carton
288
Carton Weight
30.00kgs / 66.14lb
Carton Size
50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch
Loading Container
20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs
Seal, fix, or laminate lightweight items with Deli Double-Sided Adhesive Tape. Its tissue-paper backing is coated on both sides with hot-melt pressure-sensitive adhesive for office and home projects. The tape is designed for convenient everyday use. Tear off the amount you need, apply it to the surface, then press gently and peel away the covering paper. It is suitable for tape sealing, fixing, and laminating lightweight materials.
Double-sided adhesive: Adhesive is coated on both sides of the tissue-paper backing.
Easy application: Tear the tape by hand and remove the covering paper after pressing.
Available widths: Choose from 9 mm, 12 mm, 18 mm, or 24 mm.
Suitable for: Lightweight office and household items.
Use Deli double-sided tape for neat, practical bonding and lightweight laminating tasks around the home or office. Specifications
Brand: Deli
Product type: Double-sided adhesive tape
Material: Tissue paper with hot-melt pressure-sensitive adhesive on both sides
Available widths: 9 mm, 12 mm, 18 mm, and 24 mm
Features: High viscosity, high stability, and environmentally friendly material
Recommended uses: Tape sealing, fixing, and laminating lightweight items
Packaging
One package weight: 0.03 kg / 0.07 lb
One package size: 10 × 10 × 2 cm / 3.94 × 3.94 × 0.79 in
Quantity per carton: 100 pieces
Carton weight: 4.00 kg / 8.82 lb
Carton size: 32 × 20 × 20 cm / 12.6 × 7.87 × 7.87 in
20GP loading: 2,083 cartons × 100 pieces = 208,300 pieces
40HQ loading: 4,836 cartons × 100 pieces = 483,600 pieces
Package Weight
One Package Weight
0.03kgs / 0.07lb
One Package Size
10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch
Qty per Carton
100
Carton Weight
4.00kgs / 8.82lb
Carton Size
32cm * 20cm * 20cm / 12.6inch * 7.87inch * 7.87inch
Loading Container
20GP: 2083 cartons * 100 pcs = 208300 pcs40HQ: 4836 cartons * 100 pcs = 483600 pcs
Turn a suitable power drill into a compact pruning tool with the HILDA 4 Inch Portable Pruning Chain Saw Attachment. Its alloy and plastic construction keeps the attachment lightweight and easy to carry, with no power cord required. The wear-resistant chain guide has a deep-quenched cutting edge for smooth cutting, while the baffle plate helps prevent wood chips from splashing during use.
Drill compatible: Designed for use with power drill tools.
Compact format: Measures 230 × 72 × 88 mm and weighs 0.48 kg.
Protective design: The baffle plate helps reduce wood-chip splash.
Constructed shell: The shell is designed for drop resistance and good toughness.
Specifications
Brand: HILDA
Product type: Portable pruning chain saw attachment
Bar size: 4 inch
Material: Alloy and plastic
Compatibility: Suitable for power drill tools
Product dimensions: 230 × 72 × 88 mm
Product weight: 0.48 kg
Features: Wear-resistant chain guide, deep-quenched cutting edge, baffle plate, drop-resistant shell
Packaging
Package weight: 0.52 kg / 1.15 lb
Package size: 24 × 8 × 10 cm / 9.45 × 3.15 × 3.94 inch
Quantity per carton: 30 pieces
Carton weight: 15.00 kg / 33.07 lb
Carton size: 56 × 26 × 38 cm / 22.05 × 10.24 × 14.96 inch
Important: The power drill shown in the picture is not included. This attachment is intended for portable pruning tasks with a suitable power drill tool.
Package Weight
One Package Weight
0.52kgs / 1.15lb
One Package Size
24cm * 8cm * 10cm / 9.45inch * 3.15inch * 3.94inch
Qty per Carton
30
Carton Weight
15.00kgs / 33.07lb
Carton Size
56cm * 26cm * 38cm / 22.05inch * 10.24inch * 14.96inch
Loading Container
20GP: 481 cartons * 30 pcs = 14430 pcs40HQ: 1118 cartons * 30 pcs = 33540 pcs
Insulate and protect wire connections with CHINT waterproof PVC electrical tape. Available in 10 m and 20 m rolls, it is designed for electrical work, repairs, bundling, and general protection.
Waterproof PVC: The stretchable material resists moisture and supports strong insulation.
Strong adhesion: Helps secure wire and cable connections, harnesses, and protective wrapping.
Flame retardant: Suitable for insulation protection and sheath protection applications.
Easy to use: The tape is easy to tear for convenient application.
Temperature range: Temperature resistance is rated from -5°C to 80°C.
Use it for wire and cable connector insulation rated at 600 V or below, phase identification and colour coding, harness strapping, lapping, fixing, sealing, and repair. It is suitable for environments from 0°C to 80°C and can also be used in industrial engineering applications. Specifications
Brand: CHINT
Material: PVC
Roll options: 10 m or 20 m
10 m roll weight: Approximately 48 g
20 m roll weight: Approximately 82 g
10 m roll size: Approximately 6.83 × 1.85 cm
20 m roll size: Approximately 8 × 1.85 cm
Electrical application: Wire and cable connectors rated at 600 V and below
Features: Waterproof, flame retardant, temperature resistant, ageing resistant, stretchable, moisture resistant, and adhesive
Packaging
Individual package weight: 0.06 kg / 0.14 lb
Individual package size: 10 × 10 × 2 cm / 3.94 × 3.94 × 0.79 in
Quantity per carton: 300 pieces
Carton weight: 19.10 kg / 42.11 lb
Carton size: 52 × 42 × 32 cm / 20.47 × 16.54 × 12.6 in
20GP loading: 381 cartons × 300 pieces = 114,300 pieces
40HQ loading: 885 cartons × 300 pieces = 265,500 pieces
Use this PVC electrical tape for insulating, identifying, repairing, sealing, and protecting electrical connections.
Package Weight
One Package Weight
0.06kgs / 0.14lb
One Package Size
10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch
Qty per Carton
300
Carton Weight
19.10kgs / 42.11lb
Carton Size
52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch
Loading Container
20GP: 381 cartons * 300 pcs = 114300 pcs40HQ: 885 cartons * 300 pcs = 265500 pcs
Cut foam board and other listed materials with this electrothermal hot knife tool. Its non-slip design and comfortable handle help you maintain a steady grip while working. The tool preheats quickly and uses a wire control switch for convenient operation. It is designed for smooth, fast cutting with clean edge sealing and no debris left behind. Use it for foam board, pearl cotton, benzene board, extruded plastic board, KT board, non-woven fabrics, bags, and tarpaulins. It cannot cut sponge, rubber, latex, or rubber and plastic materials.
Recommended use: After 30 minutes of use, rest the tool for more than half an hour.
Daily operating time: Working time should not exceed 3 hours per day.
Specifications
Product type: Electrothermal foam board cutting pen
Control: Wire control switch
Power supply: US, EU, or UK plug
US plug wire lengths: AC end 90 mm; DC end 90 mm
EU plug wire lengths: AC end 50 mm; DC end 90 mm
UK plug wire lengths: AC end 50 mm; DC end 90 mm
One package weight: 0.05 kg / 0.12 lb
One package size: 22 × 4 × 3 cm / 8.66 × 1.57 × 1.18 inches
Packaging
Quantity per carton: 200 pieces
Carton weight: 9.20 kg / 20.28 lb
Carton size: 46 × 38 × 35 cm / 18.11 × 14.96 × 13.78 inches
20GP loading: 435 cartons × 200 pieces = 87,000 pieces
40HQ loading: 1,011 cartons × 200 pieces = 202,200 pieces
This hot knife tool is intended for controlled cutting and edge sealing of compatible foam and fabric materials.
Package Weight
One Package Weight
0.05kgs / 0.12lb
One Package Size
22cm * 4cm * 3cm / 8.66inch * 1.57inch * 1.18inch
Qty per Carton
200
Carton Weight
9.20kgs / 20.28lb
Carton Size
46cm * 38cm * 35cm / 18.11inch * 14.96inch * 13.78inch
Loading Container
20GP: 435 cartons * 200 pcs = 87000 pcs40HQ: 1011 cartons * 200 pcs = 202200 pcs
Keep small tools and fasteners close at hand while you work with this magnetic tool wristband. Nine powerful magnets extend across most of the wrist, giving electricians, carpenters, car maintenance engineers, and DIY enthusiasts a convenient place to hold magnetic items during hard work. The wristband combines Oxford cloth, neoprene, bulletproof polyester fiber, and breathable cotton. Its lightweight design helps keep it comfortable to wear while you work. A thumb wrap makes the wristband easier to put on and use.
Adjustable fit: Suitable for wrists measuring 6.1 to 12.8 inches.
Thumb wrap: Helps position the wristband for convenient use.
Nine magnets: Covers almost the entire wrist for accessible magnetic storage.
Versatile use: Designed for electrical work, carpentry, car maintenance, and DIY projects.
This magnetic tool wristband keeps magnetic items within reach during hands-on work. Specifications
Product type: Magnetic tool wristband
Materials: Oxford cloth, neoprene, bulletproof polyester fiber, and breathable cotton
Magnet quantity: 9
Size: 10 × 40 cm
Wrist range: 6.1–12.8 inches
Design: Adjustable wristband with thumb wrap
Suitable for: Men and women
Packaging
One package weight: 0.07 kg / 0.15 lb
One package size: 15 × 10 × 3 cm / 5.91 × 3.94 × 1.18 inches
Quantity per carton: 99 pieces
Carton weight: 7.54 kg / 16.61 lb
Carton size: 47 × 32 × 35 cm / 18.5 × 12.6 × 13.78 inches
20GP loading: 506 cartons × 99 pieces = 50,094 pieces
40HQ loading: 1,176 cartons × 99 pieces = 116,424 pieces
Package Weight
One Package Weight
0.07kgs / 0.15lb
One Package Size
15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch
Qty per Carton
99
Carton Weight
7.54kgs / 16.61lb
Carton Size
47cm * 32cm * 35cm / 18.5inch * 12.6inch * 13.78inch
Loading Container
20GP: 506 cartons * 99 pcs = 50094 pcs40HQ: 1176 cartons * 99 pcs = 116424 pcs
Keep thin wood boards positioned accurately on your woodworking table saw with the Fonson GD704B or GD704C guide stopper. This metal board positioner helps set the cutting position for simple operation and precise cuts. Its two-point contact design supports cutting verticality, with one guide bearing at the top and another at the bottom.
Dual scale: The surface features laser-printed metric and imperial measurements for easier setup.
GD704B compatibility: Fits a 19-type slide with a 9.5 mm (imperial 3/8-inch) slide width.
GD704C compatibility: Fits a 30-type slide with a 19.5 mm (imperial 3/4-inch) slide width.
Application: Designed for positioning wood boards on a woodworking table saw.
Use the matching model to guide thin boards into consistent, vertically aligned table-saw cuts. Specifications
Brand: Fonson
Model: GD704B or GD704C
Product type: Table saw thin board guide stopper
Material: Metal
Scale: Laser-printed metric and imperial dual scale
Guide design: Two-point contact with one guide bearing on the top and bottom
Compatibility
GD704B: 19-type slide; 9.5 mm (imperial 3/8-inch) slide width
GD704C: 30-type slide; 19.5 mm (imperial 3/4-inch) slide width
Packaging
One package weight: 0.45 kg / 1.00 lb
One package size: 18 × 14 × 6 cm / 7.09 × 5.51 × 2.36 inches
Quantity per carton: 20 pieces
Carton weight: 10.10 kg / 22.27 lb
Carton size: 38 × 30 × 32 cm / 14.96 × 11.81 × 12.6 inches
20GP loading: 730 cartons × 20 pieces = 14,600 pieces
40HQ loading: 1,696 cartons × 20 pieces = 33,920 pieces
Package Weight
One Package Weight
0.45kgs / 1.00lb
One Package Size
18cm * 14cm * 6cm / 7.09inch * 5.51inch * 2.36inch
Qty per Carton
20
Carton Weight
10.10kgs / 22.27lb
Carton Size
38cm * 30cm * 32cm / 14.96inch * 11.81inch * 12.6inch
Loading Container
20GP: 730 cartons * 20 pcs = 14600 pcs40HQ: 1696 cartons * 20 pcs = 33920 pcs
Make accurate hinge holes for woodworking DIY and decoration projects with the Fonson 35MM Woodworking Hinge Hole Opener Locator Tool. Its ABS engineering plastic construction provides a practical fixture for repeatable hole opening. The adjustable right-angle fixing clamp supports 26 mm and 35 mm settings. You can open small holes without changing the fixture, while the limit ring helps control drilling depth. The tool is designed for simple operation, with precise hole opening for woodworking tasks.
Adjustable clamp: Right-angle fixing clamp for 26 mm and 35 mm settings.
Depth control: Limit ring provides a precise limit during hole opening.
Practical design: Made from ABS engineering plastic for woodworking DIY decoration.
Tool size: Measures 96 × 228 mm.
Use this hinge hole locator tool when preparing precise small holes for woodworking DIY decoration. Specifications
Brand: Fonson
Product type: Woodworking hinge hole opener locator tool
Material: ABS engineering plastic
Application: Woodworking DIY decoration
Hinge hole size: 35 mm
Fixing clamp: 26 mm + 35 mm right-angle adjustable clamp
Limit feature: Limit ring
Product dimensions: 96 × 228 mm
Packaging
Individual package weight: 0.55 kg / 1.22 lb
Individual package size: 26 × 11 × 6 cm / 10.24 × 4.33 × 2.36 in
Quantity per carton: 10 pieces
Carton weight: 6.60 kg / 14.55 lb
Carton size: 28 × 24 × 32 cm / 11.02 × 9.45 × 12.6 in
20GP loading: 1,240 cartons × 10 pieces = 12,400 pieces
40HQ loading: 2,878 cartons × 10 pieces = 28,780 pieces
Package Weight
One Package Weight
0.55kgs / 1.22lb
One Package Size
26cm * 11cm * 6cm / 10.24inch * 4.33inch * 2.36inch
Qty per Carton
10
Carton Weight
6.60kgs / 14.55lb
Carton Size
28cm * 24cm * 32cm / 11.02inch * 9.45inch * 12.6inch
Loading Container
20GP: 1240 cartons * 10 pcs = 12400 pcs40HQ: 2878 cartons * 10 pcs = 28780 pcs
Drill clean holes in glass, tile, masonry, wood, plastic and more with this carbide glass and tile drill bit set. The hexagonal shank helps reduce slipping and holds the bit firmly in compatible drill chucks. Its four-edged tip is designed for faster drilling, neater results and sharper cutting. Use water when drilling wave brick, ceramic tile, glass or marble to help avoid damage to the drill. Dry drilling is suitable for concrete, red brick, glazed brick, wood, plastic, PVC, honeycomb brick and foam brick. The bits can be used with electric drills, impact drills, table drills and other clamping tools. This set provides practical drill bit options for varied material and fastening tasks. Specifications
Material: Carbide
Shank: Hexagonal
Tip design: Four-edged drill bit
Compatible tools: Electric drills, impact drills, table drills and other clamping fastening tools
Available sizes: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm and 12 mm
Water drilling materials: Wave brick, ceramic tile, glass and marble
Dry drilling materials: Concrete, red brick, glazed brick, wood, plastic, PVC, honeycomb brick and foam brick
Bit Weights
3 mm: 12 g
4 mm: 13 g
5 mm: 16 g
6 mm: 18 g
8 mm: 24 g
10 mm: 32 g
12 mm: 39 g
Packaging
One package weight: 0.02 kg / 0.05 lb
One package size: 6 cm × 2 cm × 2 cm / 2.36 in × 0.79 in × 0.79 in
Quantity per carton: 1,600 pieces
Carton weight: 21.00 kg / 46.30 lb
Carton size: 40 cm × 36 cm × 32 cm / 15.75 in × 14.17 in × 12.6 in
20GP loading: 578 cartons × 1,600 pieces = 924,800 pieces
40HQ loading: 1,343 cartons × 1,600 pieces = 2,148,800 pieces
This carbide drill bit set is intended for drilling a range of materials with the appropriate wet or dry method.
Package Weight
One Package Weight
0.02kgs / 0.05lb
One Package Size
6cm * 2cm * 2cm / 2.36inch * 0.79inch * 0.79inch
Qty per Carton
1600
Carton Weight
21.00kgs / 46.30lb
Carton Size
40cm * 36cm * 32cm / 15.75inch * 14.17inch * 12.6inch
Loading Container
20GP: 578 cartons * 1600 pcs = 924800 pcs40HQ: 1343 cartons * 1600 pcs = 2148800 pcs
Repair PPR pipe fittings without replacing the entire fitting when access to a replacement is not possible. This step drill bit set offers 20 mm, 25 mm, and 32 mm sizes for lifting pipe mouths during repair work.
Bearing steel construction: Made from bearing steel with a titanium-plated surface.
Hexagonal shank: The hex shank design suits a variety of equipment.
Repair-focused design: Use the bit to lift the pipe mouth when fittings cannot be replaced.
Smooth mouth: Designed for fast lifting and resistance to running out of shape.
Titanium plating: The surface treatment provides rust prevention and long service life.
With an overall length of approximately 61 mm, these PPR pipe repair step drill bits are intended for lifting pipe mouths during fitting repairs. Specifications
Material: Bearing steel
Surface treatment: Titanium plating
Sizes: 20 mm, 25 mm, and 32 mm
Shank: Hexagonal
Length: Approximately 61 mm
Packaging
One package weight: 0.05 kg / 0.12 lb
One package size: 9 × 5 × 3 cm / 3.54 × 1.97 × 1.18 in
Quantity per carton: 440 pieces
Carton weight: 23.00 kg / 50.71 lb
Carton size: 51 × 38 × 35 cm / 20.08 × 14.96 × 13.78 in
20GP loading: 393 cartons × 440 pieces = 172,920 pieces
40HQ loading: 912 cartons × 440 pieces = 401,280 pieces
Package Weight
One Package Weight
0.05kgs / 0.12lb
One Package Size
9cm * 5cm * 3cm / 3.54inch * 1.97inch * 1.18inch
Qty per Carton
440
Carton Weight
23.00kgs / 50.71lb
Carton Size
51cm * 38cm * 35cm / 20.08inch * 14.96inch * 13.78inch
Loading Container
20GP: 393 cartons * 440 pcs = 172920 pcs40HQ: 912 cartons * 440 pcs = 401280 pcs
Create cleaner caulk lines with this three-piece silicone caulk scraper set. Each reusable seam tool is flexible, easy to clean, and designed for DIY decoration and repair work.
Three shapes: Bevels, rounded corners, and right angles help you work at different angles.
Multiple uses: Clean old glue, repair seams, apply caulk, and smooth sealant with the scraper tools.
Broad compatibility: Suitable for beautifying seams on stone, glass, metal, and tiles.
Easy handling: The small, lightweight design is convenient and flexible to use.
Reusable material: Silicone construction is described as strong and wear-resistant, while allowing repeated use.
Use the tools for indoor or outdoor projects, whether you are a professional, beginner, or DIY enthusiast. This silicone caulk scraper set helps you complete neat seam work across different surfaces. Specifications
Product type: Silicone caulk scraper and seam tool set
Quantity: 3 pieces
Material: Silicone
Features: Reusable, flexible, easy to clean, wear-resistant
Tool designs: Beveled, rounded corner, and right-angle shapes
Tool sizes: 7.6 × 5.3 cm; 4.7 × 5.7 cm; 5.7 × 3 cm
Suitable surfaces: Stone, glass, metal, and tiles
Suitable settings: Indoor and outdoor use
Packaging
Individual package weight: 0.04 kg / 0.10 lb
Individual package size: 13 × 9 × 7 cm / 5.12 × 3.54 × 2.76 in
Quantity per carton: 48 pieces
Carton weight: 3.02 kg / 6.66 lb
Carton size: 41 × 38 × 30 cm / 16.14 × 14.96 × 11.81 in
20GP loading: 570 cartons × 48 pieces = 27,360 pieces
40HQ loading: 1,324 cartons × 48 pieces = 63,552 pieces
Package Weight
One Package Weight
0.04kgs / 0.10lb
One Package Size
13cm * 9cm * 7cm / 5.12inch * 3.54inch * 2.76inch
Qty per Carton
48
Carton Weight
3.02kgs / 6.66lb
Carton Size
41cm * 38cm * 30cm / 16.14inch * 14.96inch * 11.81inch
Loading Container
20GP: 570 cartons * 48 pcs = 27360 pcs40HQ: 1324 cartons * 48 pcs = 63552 pcs
Take on detailed craft and workshop tasks with this mini electric engraving grinder pen. Its compact ABS body measures 150 × 30 mm, with a 90 cm line and a grip designed for control while drilling. Choose from three speed settings—5,000, 10,000, or 15,000 r/min—for cutting, engraving, grinding, polishing, and drilling. The 10W grinder accepts accessories with 0.5–3.2 mm chuck diameters. Use it with jade, agate, wood, aluminium plate, fine copper plate, plastic plate, particle board, printed circuit boards, and epoxy boards. The kit includes 25 accessories and a storage box, so you can switch between tasks and keep the components together. Grinding and engraving require a grinder engraving kit. Use this electric engraving pen for detailed craft work and small material-finishing tasks. Specifications
Product type: Mini electric engraving grinder pen
Material: ABS
Rated input power: 10W
Speed settings: 5,000 / 10,000 / 15,000 r/min
No-load speed: 5,000–15,000 r/min
Chuck diameter: 0.5–3.2 mm
Product size: 150 × 30 mm
Line length: 90 cm
Functions: Cutting, engraving, grinding, polishing, and drilling
Suitable materials: Jade, agate, wood, aluminium plate, fine copper plate, plastic plate, particle board, printed circuit board, and epoxy board
Package Contents
Grinder: 1
Charger: 1
Chuck clamp: 1
Rubber wheel: 1
Tapping rod: 1
Circular saw blade: 1
Diamond grinding needles: 2
Wool polishing wheels: 2
Circular sandpapers: 3
Twist bits: 3, sized 0.5 mm, 1.0 mm, and 1.5 mm
Grinding wheel heads: 5
Electric drill bits: 6, sized 0.5 mm, 1.0 mm, 1.5 mm, 2.4 mm, 3.0 mm, and 3.2 mm
Storage box: 1
Packaging
Individual package weight: 0.21 kg / 0.47 lb
Individual package size: 20 × 10 × 6 cm / 7.87 × 3.94 × 2.36 in
Quantity per carton: 60 pcs
Carton weight: 13.70 kg / 30.20 lb
Carton size: 39 × 37 × 37 cm / 15.35 × 14.57 × 14.57 in
20GP loading: 499 cartons × 60 pcs = 29,940 pcs
40HQ loading: 1,159 cartons × 60 pcs = 69,540 pcs
Package Weight
One Package Weight
0.21kgs / 0.47lb
One Package Size
20cm * 10cm * 6cm / 7.87inch * 3.94inch * 2.36inch
Qty per Carton
60
Carton Weight
13.70kgs / 30.20lb
Carton Size
39cm * 37cm * 37cm / 15.35inch * 14.57inch * 14.57inch
Loading Container
20GP: 499 cartons * 60 pcs = 29940 pcs40HQ: 1159 cartons * 60 pcs = 69540 pcs
Handle a range of home improvement tasks with this 2-piece multi-tool saw blade set. Made from high carbon steel, the blades support sawing, cutting, grinding and polishing work for DIY projects. Use them for wood cutting, wood opening, floor cleaning and nail cutting. Clear metric and imperial scales help you read measurements and control sizes precisely while working.
Two blade sizes: Includes a small-teeth blade measuring 90 × 34 mm and a 45 mm fine-teeth blade measuring 90 × 45 mm.
High carbon steel: Designed for fast cutting and long life.
Multi-purpose use: Supports a variety of cutting and home improvement tasks.
Readable scale: Metric and imperial markings make size control easier.
This 2-piece high carbon steel saw blade set helps you complete varied DIY cutting and home improvement work. Specifications
Product type: Multi-tool saw blades
Quantity: 2 pieces
Material: High carbon steel
Applications: Sawing, cutting, grinding, polishing, wood cutting, wood opening, floor cleaning and nail cutting
Blade 1: Small teeth, 90 × 34 mm
Blade 2: 45 mm fine teeth, 90 × 45 mm
Product weight: 20 g
Scale: Metric and imperial
Packaging
One package weight: 0.05 kg / 0.12 lb
One package size: 14 × 8 × 3 cm / 5.51 × 3.15 × 1.18 inches
Quantity per carton: 132 pieces
Carton weight: 7.70 kg / 16.98 lb
Carton size: 44 × 34 × 35 cm / 17.32 × 13.39 × 13.78 inches
20GP loading: 509 cartons × 132 pieces = 67,188 pieces
40HQ loading: 1,182 cartons × 132 pieces = 156,024 pieces
Package Weight
One Package Weight
0.05kgs / 0.12lb
One Package Size
14cm * 8cm * 3cm / 5.51inch * 3.15inch * 1.18inch
Qty per Carton
132
Carton Weight
7.70kgs / 16.98lb
Carton Size
44cm * 34cm * 35cm / 17.32inch * 13.39inch * 13.78inch
Loading Container
20GP: 509 cartons * 132 pcs = 67188 pcs40HQ: 1182 cartons * 132 pcs = 156024 pcs
Choose the right tool for triangular water valve and electric box locks with this 5-piece water valve triangular key wrench set. Each wrench is made from zinc alloy with a chrome-plated surface designed to resist corrosion and rust. The one-piece molded construction provides a close fit while keeping the keys compact for convenient storage and use. Before ordering, measure your original keyhole. Electric box locks come in many specifications, and these keys are not universal.
Check the outer diameter: A key with an oversized outer diameter may not fit the keyhole or valve.
Check the triangle size: The key’s inner triangle must be larger than the triangle on the lock or valve.
Two stated sizes: Select the size that matches your lock or valve measurements.
This triangular key wrench set is intended for opening compatible water valves and electric box locks. Specifications
Product type: Water valve triangular key wrench set
Quantity: 5 pieces
Material: Zinc alloy
Surface: Chrome-plated
Construction: One-piece molding
Small wrench: 56 × 35 mm; diameter 12.5 mm; weight 16 g
Large wrench: 72 × 46 mm; diameter 13.6 mm; weight 35 g
Packaging
One package weight: 0.20 kg / 0.45 lb
One package size: 15 × 16 × 6 cm / 5.91 × 6.3 × 2.36 in
Quantity per carton: 30 packages
Carton weight: 7.10 kg / 15.65 lb
Carton size: 47 × 32 × 32 cm / 18.5 × 12.6 × 12.6 in
20GP loading: 554 cartons × 30 pieces = 16,620 pieces
40HQ loading: 1,286 cartons × 30 pieces = 38,580 pieces
Package Weight
One Package Weight
0.20kgs / 0.45lb
One Package Size
15cm * 16cm * 6cm / 5.91inch * 6.3inch * 2.36inch
Qty per Carton
30
Carton Weight
7.10kgs / 15.65lb
Carton Size
47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch
Loading Container
20GP: 554 cartons * 30 pcs = 16620 pcs40HQ: 1286 cartons * 30 pcs = 38580 pcs
Keep chainsaw teeth ready for grinding with this hand crank chainsaw chain sharpener. It is designed for chain grinding operations on electric chainsaws, gasoline chainsaws, and woodworking saws. The aluminum alloy sharpener uses emery grinding heads and a hand-cranked design. Turn the handle for each tooth to repair the blade edges with a straightforward, time-saving process. Three grinding heads are included for chain sharpening work.
Hand-cranked operation: Grind each chain tooth by turning the handle.
Grinding heads: Includes three emery grinding heads.
Construction: Made from aluminum alloy with a hard-textured grinding surface.
Compact size: Measures 8.6 × 3.9 × 1.7 cm and weighs 183 g.
This chainsaw chain sharpener provides a manual tool for grinding chains used with electric, gasoline, and woodworking saws. Specifications
Product type: Hand crank chainsaw chain sharpener
Material: Aluminum alloy
Grinding head material: Emery
Grinding heads: 3
Application: Electric chainsaws, gasoline chainsaws, and woodworking saws
Product size: 8.6 × 3.9 × 1.7 cm
Net weight: 183 g
Packaging
One package weight: 0.23 kg / 0.50 lb
One package size: 17 × 7 × 11 cm / 6.69 × 2.76 × 4.33 in
Quantity per carton: 30 pieces
Carton weight: 7.90 kg / 17.42 lb
Carton size: 36 × 37 × 35 cm / 14.17 × 14.57 × 13.78 in
20GP loading: 572 cartons × 30 pieces = 17,160 pieces
40HQ loading: 1,327 cartons × 30 pieces = 39,810 pieces
Appearance note: Slight paint peeling, scratches, and similar surface marks are normal.
Package Weight
One Package Weight
0.23kgs / 0.50lb
One Package Size
17cm * 7cm * 11cm / 6.69inch * 2.76inch * 4.33inch
Qty per Carton
30
Carton Weight
7.90kgs / 17.42lb
Carton Size
36cm * 37cm * 35cm / 14.17inch * 14.57inch * 13.78inch
Loading Container
20GP: 572 cartons * 30 pcs = 17160 pcs40HQ: 1327 cartons * 30 pcs = 39810 pcs
