Networking & Connectivity

Show previous products

• 

  View options

  DTECH DT-5019 USB To RS485 RS422 Industrial Converter

  Connect a computer with RS-485 or RS-422 equipment using the DTECH DT-5019 USB to RS485 RS422 industrial converter. It supports two-way data transmission for industrial automation, PLC controllers, access control, power control, parking systems, attendance machines, and industrial computers. The converter uses FTDI-FT232RL and SP485 dual chips, with automatic serial signal-rate detection and zero-delay automatic transceiver conversion. Three indicators show power, transmission, and reception status. USB power makes setup straightforward, while the shielded 1.2 m cable helps support connection in environments where electromagnetic interference may matter. Communication: Supports RS-485 half-duplex and RS-422 full-duplex operation. Transmission: Supports 300 bps to 460800 bps and up to 32 RS-485/RS-422 terminal devices. Protection: Includes approximately 15 kV IEC1000-4-2 air-discharge protection and 600 W lightning surge protection. Use the DTECH DT-5019 to connect computers and compatible RS-485 or RS-422 equipment for industrial data communication. Specifications Model: DTECH DT-5019 Compatible standards: EIA/TIA RS-485 and RS-422 Chipset: FTDI-FT232RL + SP485 dual chip Material: ABS Power supply: USB Voltage: 5 V Working current: Less than 300 mA Communication modes: RS-485 point-to-point and point-to-multipoint half-duplex; RS-422 point-to-point and point-to-multipoint full-duplex Communication rate: 300 bps–460800 bps Communication distance: Approximately 0–5 m at the USB end; approximately 0–1200 m at the RS-485/RS-422 end Connectable nodes: 32 RS-485/RS-422 terminal devices USB signal: VCC, DATA+, DATA−, GND RS-485/RS-422/DB9 pin signal: T/R+, T/R−, GND Transmission medium: Twisted pair or shielded wire Wiring: Twisted pair or shielded wire connection Indicators: Red power light, green transmission light, yellow reception light Operating systems: Windows 10/8/8.1/7, Server 2008, XP, Vista, Mac OS 8/9, OS X, Linux 2.4, and other systems Cable: 24WG wire with 80 braided tinned copper braid, aluminium foil double shielding, four tensile ropes, seven cores, and an 8 mm wire body Length: Approximately 1.2 m Protection: Approximately 15 kV IEC1000-4-2 air discharge; 600 W lightning surge protection Packaging One package weight: 0.47 kg / 1.04 lb One package size: 20 × 15 × 3 cm / 7.87 × 5.91 × 1.18 in Quantity per carton: 62 pieces Carton weight: 30.00 kg / 66.14 lb Carton size: 50 × 50 × 60 cm / 19.69 × 19.69 × 23.62 in 20GP loading: 177 cartons × 62 pieces = 10,974 pieces 40HQ loading: 412 cartons × 62 pieces = 25,544 pieces Package Weight One Package Weight 0.47kgs / 1.04lb One Package Size 20cm * 15cm * 3cm / 7.87inch * 5.91inch * 1.18inch Qty per Carton 62 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 62 pcs = 10974 pcs40HQ: 412 cartons * 62 pcs = 25544 pcs

  Read more less

  $48.00

  View options

• 

  View options

  USB 3.0 Micro USB Cable 1.8m For Nikon D850 D810 Camera

  Connect your compatible Nikon camera to a computer with this 1.8 m USB 3.0 Micro USB cable. It is designed for data transfer with Nikon D5, D500, D800, D800E, D810, D810A, and D850 cameras, and replaces UC-E14 and UC-E22 cable part numbers. The black cable uses nickel-plated USB plugs, environmentally friendly PVC material, and tinned copper double-shielded wire. It supports USB 3.0, USB 2.0, and USB 1.1 specifications, with plug-and-play and hot-swap support. USB 3.0 transmission requires both the connected device and host to support the USB 3.0 solution. Data transfer: Supports USB 3.0 up to 5 Gbps, USB 2.0 up to 480 Mbps, and USB 1.1 up to 12 Mbps. Power support: Provides up to 900 mA per USB port when supported by the host. Compatibility: Works with Windows 2002, 2003, XP, Vista, Win7, Win8, and Mac OS systems. Specifications Product type: USB 3.0 Micro USB camera cable Length: 1.8 m Colour: Black Theoretical speed: 640 MB/s Wire: Tinned copper, double shielded Material: Environmentally friendly PVC USB plug: Nickel plating Replacement part numbers: UC-E14, UC-E22 Compatibility Nikon cameras: D5, D500, D800, D800E, D810, D810A, D850 Functions: Plug-and-play and hot-swap Packaging One package weight: 0.09 kg / 0.19 lb One package size: 15 × 8 × 6 cm / 5.91 × 3.15 × 2.36 in Quantity per carton: 288 pieces Carton weight: 30.00 kg / 66.14 lb Carton size: 50 × 50 × 60 cm / 19.69 × 19.69 × 23.62 in 20GP loading: 177 cartons × 288 pieces = 50,976 pieces 40HQ loading: 412 cartons × 288 pieces = 118,656 pieces Use it for USB data connection between a compatible Nikon camera and host computer. Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 6cm / 5.91inch * 3.15inch * 2.36inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

  Read more less

  $20.08

  View options

• 

  View options

  COOLMOON CM-MPAC PWM 5V ARGB PC Fan Controller Remote

  Control your PC’s cooling and lighting from one compact COOLMOON CM-MPAC controller. It combines music-sensing rhythm, PWM intelligent temperature control, 5V 3-pin ARGB synchronization, and wireless remote control. Connect compatible fans through the eight 4-pin PWM interfaces and add ARGB lighting through ten 3-pin interfaces. The universal interface design supports expansion, while the magnetic controller housing helps simplify installation inside your case. The wireless remote uses a 433.92MHz RF frequency and works through the case, so you can adjust the controller without direct access. Use the included motherboard sync cable and PWM temperature control signal line for system integration. The COOLMOON CM-MPAC is designed to manage PC fan control and ARGB lighting from a single controller. Specifications Brand and model: COOLMOON CM-MPAC Functions: Music induction rhythm, PWM intelligent temperature control, 5V 3-pin ARGB synchronization, and wireless remote control PWM interfaces: 8 × 4-pin ARGB interfaces: 10 × 3-pin, 5V Fan motor voltage: 12V Lighting voltage: 5V Maximum current: 10A Maximum power: 60W Remote frequency: 433.92MHz RF Controller dimensions: 118 × 55 × 24mm Remote battery: Built-in CR2025 button battery Installation: Magnetic attraction Package Contents Controller: 1 Remote control: 1 SATA power cable: 1 Motherboard sync cable: 1 PWM temperature control signal line: 1 Instruction manual: 1 Packaging Individual package weight: 0.20kg / 0.45lb Individual package size: 18 × 15 × 10cm / 7.09 × 5.91 × 3.94in Quantity per carton: 146 units Carton weight: 30.00kg / 66.14lb Carton size: 50 × 50 × 60cm / 19.69 × 19.69 × 23.62in 20GP loading: 177 cartons × 146 units = 25,842 units 40HQ loading: 412 cartons × 146 units = 60,152 units Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 18cm * 15cm * 10cm / 7.09inch * 5.91inch * 3.94inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs

  Read more less

  $25.87 - $28.35

  View options

• 

  View options

  DTECH DT-5019 USB to RS485 RS422 Converter Cable FT232

  Connect a computer to RS485 or RS422 equipment with the DTECH DT-5019 USB to RS485 RS422 converter cable. It supports two-way data transmission and works with USB 2.0, RS485, and RS422 standard protocols. The cable supports data rates from 300 to 3,000,000 bps and transmission distances up to 1,200 metres at the RS422/485 end. Automatic transmission and reception switching controls the data direction, while three indicator lights show power, sending, and receiving status. The filtered magnetic ring, tinned copper core, and multilayer shielding support stable signal transmission. Wide compatibility: Use it with Windows XP, Windows 7, Windows 8, Windows 10, later Windows systems, macOS, Linux, and other systems. Device connections: Connect up to 256 RS485 or RS422 devices for point-to-multipoint communication. Protection: Each RS485 interface line includes 600 W lightning surge protection, with TVS diode protection. Transmission medium: Supports twisted-pair cable with a wire diameter above 0.5 mm or shielded wire. This converter cable provides a computer connection for RS485 and RS422 devices in two-way data communication applications. Specifications Model: DT-5019 Interface compatibility: RS422 and RS485 Working mode: Asynchronous differential transmission; half/full duplex Transmission rate: 300–3,000,000 bps Transmission distance: Up to 1,200 metres at the RS422/485 end USB cable length: No more than 5 metres Approximate cable length: 0.5 m or 1.5 m Supported protocols: USB 2.0, RS485, and RS422 Indicator lights: Red power, green sending signal, yellow receiving signal Automatic functions: Transmission direction control and serial port signal baud-rate detection Maximum device connections: 256 RS422 or RS485 devices Core and shielding: 28/24 AWG tinned copper core with multilayer shielding Additional design: Filter magnetic ring Packaging One package weight: 0.10 kg / 0.22 lb One package size: 20 × 15 × 3 cm / 7.87 × 5.91 × 1.18 in Quantity per carton: 242 pieces Carton weight: 21.78 kg / 48.02 lb Carton size: 50 × 50 × 43.6 cm / 19.69 × 19.69 × 17.17 in 20GP loading: 244 cartons × 242 pieces = 59,048 pieces 40HQ loading: 567 cartons × 242 pieces = 137,214 pieces Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 20cm * 15cm * 3cm / 7.87inch * 5.91inch * 1.18inch Qty per Carton 242 Carton Weight 21.78kgs / 48.02lb Carton Size 50cm * 50cm * 43.6cm / 19.69inch * 19.69inch * 17.17inch Loading Container 20GP: 244 cartons * 242 pcs = 59048 pcs40HQ: 567 cartons * 242 pcs = 137214 pcs

  Read more less

  $36.12 - $44.83

  View options

• 

  View options

  USB 3.0 Male To Female Extension Cable Double Shielded

  Extend your USB connection across a room with this USB 3.0 male-to-female extension cable. It is available in 10-metre and 15-metre lengths, giving you more flexibility when connecting devices away from your computer or TV. The cable supports USB 2.0 and USB 3.0 connections. Its thicker core supports stable transmission, while the double-shielded design helps reduce interference. The PVC cable body is designed for wear resistance, and the gold-plated interface resists oxidation and rust. Practical connections: Use it with connecting cables, USB flash drives, mice, keyboards, and TV USB ports. Transfer speed: The stated transfer speed can reach 410M/s, with 1GB files transferred in 3 seconds. Connector finish: Available with gold-plated or nickel-plated connectors. Flexible reach: Choose a 10-metre or 15-metre cable length. This USB extension cable helps you connect USB devices and extend a TV USB port for desktop use and entertainment. Specifications Product type: USB 3.0 male-to-female extension cable Supported versions: USB 2.0 and USB 3.0 Connector: Gold-plated or nickel-plated Cable material: PVC Cable design: Double shielded Available lengths: 10 metres and 15 metres Weight: Approximately 500 grams or 700 grams Stated transfer speed: Up to 410M/s Stated file transfer: 1GB in 3 seconds Packaging One package weight: 0.71 kg / 1.57 lb One package size: 30 × 20 × 15 cm / 11.81 × 7.87 × 5.91 inches Quantity per carton: 42 pieces Carton weight: 30.00 kg / 66.14 lb Carton size: 50 × 50 × 60 cm / 19.69 × 19.69 × 23.62 inches 20GP loading: 177 cartons × 42 pieces = 7,434 pieces 40HQ loading: 412 cartons × 42 pieces = 17,304 pieces Package Weight One Package Weight 0.71kgs / 1.57lb One Package Size 30cm * 20cm * 15cm / 11.81inch * 7.87inch * 5.91inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs40HQ: 412 cartons * 42 pcs = 17304 pcs

  Read more less

  $54.11 - $62.95

  View options

• 

  View options

  Jasoz USB 2.0 Male To Female Computer Extension Cable

  Extend your computer’s USB connection for easier access at your desk with the Jasoz USB 2.0 Male to Female Computer Extension Cable. It supports USB 2.0 transmission for connecting compatible devices such as a keyboard, mouse, card reader, or other computer accessories. The soft PVC cable body resists bending, while the thicker oxygen-free copper core supports stable transmission. Magnetic anti-interference helps reduce transmission issues, and the three-layer shielding combines aluminum foil, a 64-braided net, and a ground wire. This design supports stable picture quality without flickering during use. Connection type: USB 2.0 male to female extension cable. Cable material: Soft PVC body with an oxygen-free copper wire. Shielding: Aluminum foil, 64-braided net, and ground wire. Compatible equipment: Computers, keyboards, mice, card readers, and other applicable USB devices. Specifications Interface type: USB Transmission: USB 2.0 Interference protection: Magnetic anti-interference Packaging One package weight: 0.10 kg / 0.23 lb One package size: 10 × 10 × 3 cm / 3.94 × 3.94 × 1.18 in Quantity per carton: 120 pieces Carton weight: 13.00 kg / 28.66 lb Carton size: 40 × 30 × 30 cm / 15.75 × 11.81 × 11.81 in Container loading: 20GP: 740 cartons × 120 pieces = 88,800 pieces; 40HQ: 1,719 cartons × 120 pieces = 206,280 pieces Use it to extend a computer USB port for convenient office work and everyday device connections. Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 120 Carton Weight 13.00kgs / 28.66lb Carton Size 40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch Loading Container 20GP: 740 cartons * 120 pcs = 88800 pcs40HQ: 1719 cartons * 120 pcs = 206280 pcs

  Read more less

  $19.11 - $25.79

  View options

• 

  View options

  USB C 40Gbps 240W 8K 60Hz Female To Male Adapter

  Connect USB-C equipment with this female-to-male USB-C adapter for charging, data transmission, and screen projection. It supports transmission rates up to 40Gbps, PD240W fast charging at 50V, and video output up to 8K at 60Hz or 4K at 120Hz. Use it with a Type-C display for same-screen projection, synchronized audio and video, clear picture quality, and smooth operation. The USB-C input and output support practical connections across compatible Type-C devices and displays. High-speed transmission: Supports up to 40Gbps. Fast charging: Supports PD240W at 50V. Display support: Supports 8K at 60Hz and 4K at 120Hz. Multiple functions: Supports charging, transmission, and screen projection. This USB-C adapter is designed for charging, high-speed data transfer, and Type-C display connections. Specifications Product type: USB-C female-to-male adapter Interface: Type-C input and output Transmission rate: Up to 40Gbps Charging support: PD240W Voltage: 50V Video support: 8K at 60Hz; 4K at 120Hz Functions: Charging, transmission, and screen projection Packaging Individual package weight: 0.03kg / 0.07lb Individual package size: 15cm × 5cm × 1cm / 5.91in × 1.97in × 0.39in Quantity per carton: 450 pieces Carton weight: 15.00kg / 33.07lb Carton size: 42cm × 32cm × 26cm / 16.54in × 12.6in × 10.24in 20GP loading: 763 cartons × 450 pieces = 343,350 pieces 40HQ loading: 1,771 cartons × 450 pieces = 796,950 pieces Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 5cm * 1cm / 5.91inch * 1.97inch * 0.39inch Qty per Carton 450 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 26cm / 16.54inch * 12.6inch * 10.24inch Loading Container 20GP: 763 cartons * 450 pcs = 343350 pcs40HQ: 1771 cartons * 450 pcs = 796950 pcs

  Read more less

  $20.00

  View options

• 

  View options

  40Gbps 240W USB-C Female To Female Straight Adapter

  Connect two USB-C cables with this 40Gbps USB-C female-to-female straight adapter. It supports up to 240W PD fast charging at 50V, plus high-speed data transmission for compatible devices. Use the adapter with a Type-C display for screen projection at up to 8K 60Hz. It supports synchronized audio and video, clear picture quality, and smooth operation. The USB-C interface handles charging, transmission, and display projection in one compact connection. High-speed transmission: Supports data rates up to 40Gbps. Fast charging: Supports PD charging up to 240W at 50V. Display support: Supports 8K 60Hz and 4K 120Hz output. Connection type: USB-C female-to-female, straight design. This USB-C adapter is designed for connecting USB-C equipment for charging, data transmission, and screen projection. Specifications Product type: USB-C female-to-female straight adapter Interface: Type-C input/output Transmission rate: Up to 40Gbps Voltage: 50V Power: 240W Display support: 8K 60Hz and 4K 120Hz Functions: Charging, transmission, and screen projection Packaging Individual package weight: 0.03kg / 0.07lb Individual package size: 15 × 5 × 1cm / 5.91 × 1.97 × 0.39in Quantity per carton: 450 pieces Carton weight: 15.00kg / 33.07lb Carton size: 42 × 32 × 26cm / 16.54 × 12.6 × 10.24in 20GP loading: 763 cartons × 450 pieces = 343,350 pieces 40HQ loading: 1,771 cartons × 450 pieces = 796,950 pieces Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 5cm * 1cm / 5.91inch * 1.97inch * 0.39inch Qty per Carton 450 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 26cm / 16.54inch * 12.6inch * 10.24inch Loading Container 20GP: 763 cartons * 450 pcs = 343350 pcs40HQ: 1771 cartons * 450 pcs = 796950 pcs

  Read more less

  $19.55

  View options

• 

  View options

  USB C Female To Female Adapter 40Gbps 240W 8K Video

  Connect two USB-C devices with this USB-C female-to-female adapter for charging, data transmission, and screen projection. It supports transmission rates up to 40Gbps and PD 240W fast charging at 50V, helping you transfer data or power compatible USB-C equipment through a single connection. For display use, connect a Type-C interface display to project content at up to 8K 60Hz. The adapter also supports 4K 120Hz, with synchronized audio and video, clear picture quality, and smooth operation. USB-C connection: Female Type-C input and output interfaces. Charging support: Supports PD 240W power delivery at 50V. Video support: Supports 8K 60Hz and 4K 120Hz display output. Multiple functions: Use it for charging, transmission, and screen projection. Use this USB-C adapter to link compatible Type-C devices for high-speed transmission, charging, or display projection. Specifications Product type: USB-C female-to-female adapter Interface input/output: Type-C Transmission rate: 40Gbps Charging power: 240W Voltage: 50V Video support: 8K 60Hz; 4K 120Hz Functions: Charging, transmission, screen projection Packaging One package weight: 0.03kg / 0.07lb One package size: 15cm × 5cm × 1cm / 5.91in × 1.97in × 0.39in Quantity per carton: 450 pieces Carton weight: 15.00kg / 33.07lb Carton size: 42cm × 32cm × 26cm / 16.54in × 12.6in × 10.24in 20GP loading: 763 cartons × 450 pieces = 343,350 pieces 40HQ loading: 1,771 cartons × 450 pieces = 796,950 pieces Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 5cm * 1cm / 5.91inch * 1.97inch * 0.39inch Qty per Carton 450 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 26cm / 16.54inch * 12.6inch * 10.24inch Loading Container 20GP: 763 cartons * 450 pcs = 343350 pcs40HQ: 1771 cartons * 450 pcs = 796950 pcs

  Read more less

  $19.71

  View options

• 

  View options

  PWM Fan Hub 8-Port CPU Cooling Fan Extender Model PH35D

  Expand your PC cooling setup with the PH35D PWM Fan Hub, providing eight fan ports from one compact board. It connects to a large 4-pin or SATA power input and supports motherboard 3-pin and 4-pin fans through its motherboard 4-pin interface. Direct power from the supply helps reduce load pressure on the motherboard while retaining intelligent fan speed control. Eight-port expansion: Connect up to eight 12V, 2A fans for centralized fan wiring. Stable power: Eight capacitors support stable power delivery to connected fans. Neat installation: The 10 × 4 cm board includes double-sided EVA adhesive and ten self-locking nylon cable ties. PWM control cable: The included 2P-to-4P cable links the controller to the motherboard CPU PWM fan socket. Use the PH35D to organize internal fan connections and keep your computer’s cooling wiring tidy. Specifications Model: PH35D Product type: PWM fan hub and CPU cooling fan extender Input: Large 4-pin or SATA Output: Motherboard 4-pin interface Fan compatibility: Motherboard 3-pin and 4-pin fans Number of ports: 8 Supported fans: Up to eight 12V, 2A fans Product size: Approximately 10 × 4 cm Product weight: Approximately 48.2 g Adhesive: Double-sided EVA cotton, 2 mm thick, covering the bottom Package Contents 1 × PWM fan hub 1 × 2P-to-4P PWM fan control cable 10 × self-locking nylon cable ties Packaging One package weight: 0.05 kg / 0.12 lb One package size: 12 × 5 × 4 cm / 4.72 × 1.97 × 1.57 in Quantity per carton: 500 pieces Carton weight: 27.00 kg / 59.52 lb Carton size: 50 × 50 × 54 cm / 19.69 × 19.69 × 21.26 in 20GP loading: 197 cartons × 500 pieces = 98,500 pieces 40HQ loading: 458 cartons × 500 pieces = 229,000 pieces Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 5cm * 4cm / 4.72inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs

  Read more less

  $21.93

  View options

• 

  View options

  USB C Female To USB 3.0 Male Adapter 10Gbps Data Transfer

  Connect a USB-C device or cable to a USB 3.0 port with this USB-C female to USB 3.0 male adapter. It supports data synchronisation and data transfer rates of up to 10 Gbps when both the cable and connected devices support 10 Gbps. The adapter features a chip and supports data transfer on both sides. Its aluminium alloy housing is integrated with the plastic body without glue. It also supports scalable power charging and offers plug-and-play use. Connection: USB-C female to USB 3.0 male. Data transfer: Up to 10 Gbps with compatible cables and devices. Function: Data synchronisation and scalable power charging. Design: Integrated aluminium alloy and plastic construction. Setup: Plug and play. Use this adapter for USB-C to USB 3.0 data transfer and charging connections. Specifications Product type: USB-C female to USB 3.0 male adapter. Transfer rate: Up to 10 Gbps. Transfer support: Both sides support data transfer. Housing: Aluminium alloy integrated with plastic. Charging: Supports scalable power charging. Packaging One package weight: 0.02 kg / 0.05 lb. One package size: 11 × 9 × 1 cm / 4.33 × 3.54 × 0.39 in. Quantity per carton: 500 pieces. Carton weight: 8.50 kg / 18.74 lb. Carton size: 45 × 30 × 30 cm / 17.72 × 11.81 × 11.81 in. 20GP loading: 658 cartons × 500 pieces = 329,000 pieces. 40HQ loading: 1,528 cartons × 500 pieces = 764,000 pieces. Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 11cm * 9cm * 1cm / 4.33inch * 3.54inch * 0.39inch Qty per Carton 500 Carton Weight 8.50kgs / 18.74lb Carton Size 45cm * 30cm * 30cm / 17.72inch * 11.81inch * 11.81inch Loading Container 20GP: 658 cartons * 500 pcs = 329000 pcs40HQ: 1528 cartons * 500 pcs = 764000 pcs

  Read more less

  $19.52

  View options

• 

  View options

  DTECH DT-5119 USB To RS485 RS422 Industrial Converter 0.5m

  Connect a computer with USB to RS-485 or RS-422 equipment using the DTECH DT-5119 converter. Its FTDI-FT232RL and SP485 dual-chip design supports two-way data transmission for industrial automation, PLC controllers, access control, power control, parking, and attendance systems. The 0.5 m converter supports asynchronous half-duplex RS-485 and full-duplex RS-422 communication. Automatic serial signal-rate detection and zero-delay transceiver conversion help manage data-flow direction. Three status lights show power, transmission, and reception activity. Broad compatibility: Supports Windows, macOS, Linux, Server 2008, XP, and Vista systems. Long-distance connection: Supports approximately 0–1,200 m at the RS-485/RS-422 end. Protected construction: Includes double-shielded 24WG wiring, 15 kV air-discharge protection, and 600 W lightning surge protection. Use this USB to RS485 RS422 converter to connect computers with compatible serial equipment in control and communication systems. Specifications Brand: DTECH Model: DT-5119 Product type: USB to RS-485/RS-422 converter Material: ABS Length: Approximately 0.5 m Weight: Approximately 70 g Chipset: FTDI-FT232RL + SP485 dual chip Standards: EIA/TIA RS-485 and RS-422 Communication modes: RS-485 point-to-point and point-to-multipoint half-duplex; RS-422 point-to-point and point-to-multipoint full-duplex Communication rate: 300 bps–460,800 bps Connectable nodes: Up to 32 RS-485/RS-422 terminal devices USB signals: VCC, DATA+, DATA-, GND RS-485/RS-422/DB9 signals: T/R+, T/R-, GND Power supply: USB-powered Voltage: 5 V Working current: Less than 300 mA USB-end communication distance: Approximately 0–5 m Wiring: Twisted pair or shielded wire Transmission medium: Twisted pair or shielded wire Indicators: Red power, green transmission, yellow reception Protection: Approximately 15 kV IEC1000-4-2 air discharge; 600 W lightning surge protection Supported systems: Windows 10/8/8.1/7, Server 2008, XP, Vista, Mac OS 8/9, OS X, Linux 2.4, and other systems Packaging One package weight: 0.20 kg / 0.45 lb One package size: 20 × 15 × 3 cm / 7.87 × 5.91 × 1.18 in Quantity per carton: 146 units Carton weight: 30.00 kg / 66.14 lb Carton size: 50 × 50 × 60 cm / 19.69 × 19.69 × 23.62 in 20GP loading: 177 cartons × 146 units = 25,842 units 40HQ loading: 412 cartons × 146 units = 60,152 units Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 20cm * 15cm * 3cm / 7.87inch * 5.91inch * 1.18inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs

  Read more less

  $36.77

  View options

• 

  View options

  T10 USB 3.1 To SATA Adapter Cable For 2.5 Inch Hard Drive

  Connect a 2.5-inch SATA hard drive or SSD to compatible equipment with the T10 USB to SATA adapter cable. Its two-in-one USB Type-A and USB Type-C design supports flexible connections for devices such as laptops and HDTVs. Interface: USB 3.0 to SATA 3. Drive support: Suitable for 2.5-inch SSD and SATA drives. Connection options: USB Type-A and USB Type-C in one cable. Construction: Copper wire with an injection-molded process. Length: 50 cm. Use this compact adapter cable to connect a 2.5-inch SATA drive through a USB port. Specifications Product type: USB to SATA adapter cable Model: T10 Interface: USB 3.0 to SATA 3 USB connectors: USB Type-A and USB Type-C Compatible drive type: 2.5-inch SSD and SATA Suggested applications: HDTV and laptop Wire material: Copper Process: Injection molding Wire length: 50 cm Product size: 25 × 4.5 cm Product weight: Approximately 30 g Packaging One package weight: 0.05 kg / 0.12 lb One package size: 28 × 8 × 4 cm / 11.02 × 3.15 × 1.57 in Quantity per carton: 500 pieces Carton weight: 27.00 kg / 59.52 lb Carton size: 50 × 50 × 54 cm / 19.69 × 19.69 × 21.26 in 20GP loading: 197 cartons × 500 pieces = 98,500 pieces 40HQ loading: 458 cartons × 500 pieces = 229,000 pieces Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 28cm * 8cm * 4cm / 11.02inch * 3.15inch * 1.57inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs

  Read more less

  $22.09

  View options

• 

  View options

  3 Pack USB 2.0 Female To Female Adapter Connector Set

  Connect two USB plugs with this 3-pack USB 2.0 female-to-female adapter connector set. Each plastic adapter has USB female sockets on both ends, allowing you to join USB plugs or convert a USB interface. Use the adapters for USB 2.0 data transmission and charging applications. Their compact design makes them convenient to keep with your cables, while the versatile format supports simple USB connection changes when needed. USB 2.0 compatibility: Suitable for USB version 2.0 connections. Female-to-female design: Both ends feature USB female sockets. Practical use: Connect two USB plugs or convert a USB interface. Material: Plastic construction. Quantity: Three USB adapters included. This USB female-to-female adapter set is designed for connecting USB plugs for data transmission and charging. Specifications Product type: USB 2.0 female-to-female adapter connector set Interface form: USB female to USB female Interface: USB sockets on both ends Applicable version: USB 2.0 Functions: Data transmission and charging Material: Plastic Pack quantity: 3 pieces Packaging Individual package weight: 0.05 kg / 0.11 lb Individual package size: 8 × 6 × 2 cm / 3.15 × 2.36 × 0.79 in Quantity per carton: 200 pieces Carton weight: 9.20 kg / 20.28 lb Carton size: 40 × 30 × 20 cm / 15.75 × 11.81 × 7.87 in 20GP loading: 1,111 cartons × 200 pieces = 222,200 pieces 40HQ loading: 2,579 cartons × 200 pieces = 515,800 pieces Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 8cm * 6cm * 2cm / 3.15inch * 2.36inch * 0.79inch Qty per Carton 200 Carton Weight 9.20kgs / 20.28lb Carton Size 40cm * 30cm * 20cm / 15.75inch * 11.81inch * 7.87inch Loading Container 20GP: 1111 cartons * 200 pcs = 222200 pcs40HQ: 2579 cartons * 200 pcs = 515800 pcs

  Read more less

  $19.16

  View options

• 

  View options

  20-Pin Dual USB 3.0 Motherboard Extension Cable, Blue

  Extend your motherboard’s USB 3.0 connectivity with this 20-pin dual USB 3.0 motherboard extension cable. It connects a 19-pin female motherboard header to a double-layer, dual-port USB 3.0 A female connector, giving you access to two standard USB ports. The cable uses twisted-pair data wires with impedance matching to minimise signal crosstalk. Inner-film shielding, plus braided copper mesh and aluminium-platinum double-layer shielding, helps reduce electromagnetic and radio interference. Its flexible PVC jacket and overmolded construction support reliable everyday use. USB 3.0 speed: Supports the 5Gbps standard, with measured speeds of 500–600MB/s using a USB 3.0 hard disk. USB 2.0 limitation: USB 2.0 devices operate at USB 2.0 speed and are not accelerated. Installation: Includes two M3 × 8mm screws for securing the connector. This cable provides a USB 3.0 connection between a compatible motherboard header and external USB devices. Specifications Product type: 20-pin dual USB 3.0 motherboard extension cable Connector 1: 19-pin female connector Connector 2: Double-layer, dual-port standard USB 3.0 A female connector Conductor: Positive standard 24, 28 copper; 5.5mm outer diameter Wire standard: AWM 20276 Outer cover: Environmental protection PVC Transmission speed: 5Gbps standard Measured speed: 500–600MB/s with a USB 3.0 hard disk Screws: Two M3 × 8mm screws Single weight: 67g, including two screws Packaging Package weight: 0.11kg / 0.24lb Package size: 22 × 15 × 5cm / 8.66 × 5.91 × 1.97in Quantity per carton: 288 pieces Carton weight: 30.00kg / 66.14lb Carton size: 50 × 50 × 60cm / 19.69 × 19.69 × 23.62in 20GP loading: 177 cartons × 288 pieces = 50,976 pieces 40HQ loading: 412 cartons × 288 pieces = 118,656 pieces Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 22cm * 15cm * 5cm / 8.66inch * 5.91inch * 1.97inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

  Read more less

  $22.12

  View options

• 

  View options

  USB C To MagSafe Adapter For MacBook Air And MacBook Pro

  Reuse an older MagSafe charger with newer USB-C devices using this USB-C to MagSafe adapter. It converts a MagSafe 1 or MagSafe 2 charging connection for compatible MacBook Pro and MacBook Air models, as well as USB-C laptops, phones, tablets, game consoles, and Nintendo Switch devices. The magnetic connection helps the cable detach when pulled, reducing the risk of dragging the connected device. The compact, lightweight design fits easily in a laptop bag for travel or everyday charging. Built-in protection covers overcurrent, overvoltage, overcharging, over-discharging, and short circuits. Magnetic connection: Detaches from the adapter when the cable is pulled. USB-C compatibility: Supports devices with a USB-C charging interface. Power support: Accepts 45W, 60W, and 85W MagSafe 1 or MagSafe 2 power adapters. Reversible connector: The USB-C plug can be connected either way. Charging indicator: The MagSafe LED does not illuminate during charging. Specifications Product type: USB-C to magnetic MagSafe charging adapter Input: 45W, 60W, or 85W MagSafe 1 or MagSafe 2 power adapter Output: USB-C device charging at 29W, 45W, or 60W USB-C output ratings: 20V / 3A, 14.5V / 3.25A, 14.5V / 2A, 9V / 2A, and 5V / 2.4A Maximum output: 45W with 45W or 60W adapters; 60W with an 85W adapter Protection: Overcurrent, overvoltage, overcharging, over-discharging, and short-circuit protection Supported devices: MacBook Pro 2016–2018, MacBook Air, USB-C laptops, phones, tablets, game consoles, and Nintendo Switch Package weight: 0.06kg / 0.13lb Package size: 15 × 5 × 3cm / 5.91 × 1.97 × 1.18in Packaging Quantity per carton: 100 units Carton weight: 4.80kg / 10.58lb Carton size: 20 × 30 × 30cm / 7.87 × 11.81 × 11.81in Use it to charge compatible USB-C devices with an existing MagSafe 1 or MagSafe 2 power adapter. Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 15cm * 5cm * 3cm / 5.91inch * 1.97inch * 1.18inch Qty per Carton 100 Carton Weight 4.80kgs / 10.58lb Carton Size 20cm * 30cm * 30cm / 7.87inch * 11.81inch * 11.81inch Loading Container 20GP: 1481 cartons * 100 pcs = 148100 pcs40HQ: 3439 cartons * 100 pcs = 343900 pcs

  Read more less

  $35.05

  View options

• 

  View options

  USB 3.0 SATA IDE Hard Drive Adapter With Clone Function

  Connect SATA and IDE hard drives or SSDs to your computer through USB 3.0 with this USB 3.0 SATA IDE hard drive adapter. It supports 2.5-inch, 3.5-inch, and 5.25-inch drive mechanisms, giving you one adapter for different drive sizes and interface types. The adapter is compatible with SATA I, SATA II, SATA III, IDE, and USB 3.0 transfer speeds up to 5 Gbps. Use the included cables and power accessories to connect suitable drives, with support for PS4, Xbox, TV, and monitoring equipment. The adapter also features a clone function and works with Windows XP, Vista, 7, 8, 10, and 11, as well as Mac OS 10 or higher. Its aluminum alloy housing measures 6.75 × 6.75 × 1.8 cm. Specifications Product type: USB 3.0 SATA/IDE hard drive adapter Interface: SATA and IDE USB port: USB 3.0 Type-A Supported drive sizes: 2.5-inch, 3.5-inch, and 5.25-inch Drive compatibility: SATA I, SATA II, SATA III, SSD, HDD, and IDE USB speed: Up to 5 Gbps Clone function: Included Material: Aluminum alloy Product dimensions: 6.75 × 6.75 × 1.8 cm Product weight: 100 g USB cable length: 0.8 m Power adapter cable length: 1.2 m Input voltage: 110–240 V AC Output voltage: 12 V DC Supported equipment: PS4, Xbox, TV, and monitoring equipment Compatible systems: Windows XP, Vista, 7, 8, 10, 11, and Mac OS 10 or higher Package Contents Included: USB 3.0 cable Included: AC/DC power adapter Included: 3.5-inch to 2.5-inch IDE bridge board Included: 4-pin IDE power adapter Included: User manual Packaging One package weight: 0.33 kg / 0.73 lb One package size: 15.5 × 11.5 × 5 cm / 6.1 × 4.53 × 1.97 inches Quantity per carton: 60 pieces Carton weight: 17.00 kg / 37.48 lb Carton size: 55 × 35 × 33 cm / 21.65 × 13.78 × 12.99 inches 20GP loading: 419 cartons × 60 pieces = 25,140 pieces 40HQ loading: 974 cartons × 60 pieces = 58,440 pieces This adapter is designed for connecting and working with SATA and IDE drives through a USB 3.0 port. Package Weight One Package Weight 0.33kgs / 0.73lb One Package Size 15.5cm * 11.5cm * 5cm / 6.1inch * 4.53inch * 1.97inch Qty per Carton 60 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 35cm * 33cm / 21.65inch * 13.78inch * 12.99inch Loading Container 20GP: 419 cartons * 60 pcs = 25140 pcs40HQ: 974 cartons * 60 pcs = 58440 pcs

  Read more less

  $42.26

  View options

• 

  View options

  USB C Male To USB A Female OTG Adapter 10Gbps Data

  Connect a USB Type-C device to a USB-A accessory with this OTG adapter. Its USB Type-C male connector plugs into a laptop, phone, or tablet, while the USB 3.0 Type-A female port accepts compatible external USB devices. The reversible Type-C design lets you insert the connector in either orientation, making everyday connections more convenient. With a rated data transfer speed of up to 10Gbps, it supports data access for external USB devices, including hard disks. Connector design: USB Type-C male to USB Type-A female. OTG function: Supports external USB devices for tablets and mobile phones. Data transfer: Supports a 10Gbps data transfer rating. Supported devices: Suitable for laptops, phones, tablets, and hard disks. Specifications Product type: USB Type-C male to USB Type-A female OTG data adapter USB standard: USB 3.0 / USB 3.1 Type-C Connector: Reversible USB Type-C male Port: USB Type-A female Data transfer rating: 10Gbps OTG support: Yes Packaging One package weight: 0.02kg / 0.04lb One package size: 5 × 5 × 2cm / 1.97 × 1.97 × 0.79in Quantity per carton: 100 pieces Carton weight: 2.50kg / 5.51lb Carton size: 20 × 20 × 10cm / 7.87 × 7.87 × 3.94in Use this adapter to connect external USB-A devices to USB Type-C laptops, phones, and tablets. Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 5cm * 2cm / 1.97inch * 1.97inch * 0.79inch Qty per Carton 100 Carton Weight 2.50kgs / 5.51lb Carton Size 20cm * 20cm * 10cm / 7.87inch * 7.87inch * 3.94inch Loading Container 20GP: 6666 cartons * 100 pcs = 666600 pcs40HQ: 15476 cartons * 100 pcs = 1547600 pcs

  Read more less

  $20.05

  View options

• 

  View options

  90 Degree Mini USB Female to Micro USB Male Adapter

  Connect older mini USB accessories to devices with micro USB ports using this 90 Degree Mini USB Female to Micro USB Male Adapter. It lets you use compatible mini USB chargers and accessories with micro USB phones and headphones. The mini USB female connector accepts your existing accessory, while the micro USB male connector plugs into the device. Its lightweight design is easy to carry and simple to use for charging and everyday connections. Adapter type: Mini USB female to micro USB male Design: 90-degree adapter Use: Connect mini USB accessories to micro USB ports Compatibility: Most mini USB chargers, micro USB phones and headphones Weight: Lightweight This adapter provides a practical way to keep using compatible mini USB accessories with micro USB devices. Specifications Product type: Mini USB female to micro USB male adapter Package weight: 0.01 kg / 0.03 lb Package size: 3 × 2 × 1 cm / 1.18 × 0.79 × 0.39 in Packaging Quantity per carton: 1,000 pieces Carton weight: 7.00 kg / 15.43 lb Carton size: 20 × 20 × 15 cm / 7.87 × 7.87 × 5.91 in 20GP loading: 4,444 cartons × 1,000 pieces = 4,444,000 pieces 40HQ loading: 10,317 cartons × 1,000 pieces = 10,317,000 pieces Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 3cm * 2cm * 1cm / 1.18inch * 0.79inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 20cm * 20cm * 15cm / 7.87inch * 7.87inch * 5.91inch Loading Container 20GP: 4444 cartons * 1000 pcs = 4444000 pcs40HQ: 10317 cartons * 1000 pcs = 10317000 pcs

  Read more less

  $18.59

  View options

• 

  View options

  9 Pin Motherboard Header to Dual USB 2.0 Female Adapter

  Add two USB A connections to a compatible motherboard with this 9-pin header to dual USB 2.0 female adapter. It connects to a motherboard 9-pin female header and provides two female USB interfaces for devices such as a dongle or wireless mouse receiver. The adapter uses plastic and metal construction and supports USB 1.1 as well as USB 2.0. It supports 32-bit and 64-bit versions of Windows 8, along with Windows 2000, XP, 2003, Vista, 2008, and Windows 7. Linux and Mac OS are also supported. Use this compact internal adapter when you need two additional USB connections from a 9-pin motherboard header. Specifications Product type: Motherboard 9-pin header to dual USB female adapter Input connection: 9-pin female motherboard header Output connections: Two female USB A interfaces Interface: USB 2.0 9-pin Compatibility: USB 1.1 and USB 2.0 Material: Plastic and metal Supported devices: USB dongles and wireless mouse receivers Supported systems: Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 2008, Windows 7, Windows 8 32-bit and 64-bit, Linux, and Mac OS Packaging Individual package weight: 0.02 kg / 0.04 lb Individual package size: 8 × 4 × 1 cm / 3.15 × 1.57 × 0.39 in Quantity per carton: 500 pieces Carton weight: 8.00 kg / 17.64 lb Carton size: 63 × 31 × 7 cm / 24.8 × 12.2 × 2.76 in 20GP loading: 1,950 cartons × 500 pieces = 975,000 pieces 40HQ loading: 4,528 cartons × 500 pieces = 2,264,000 pieces Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 4cm * 1cm / 3.15inch * 1.57inch * 0.39inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 63cm * 31cm * 7cm / 24.8inch * 12.2inch * 2.76inch Loading Container 20GP: 1950 cartons * 500 pcs = 975000 pcs40HQ: 4528 cartons * 500 pcs = 2264000 pcs

  Read more less

  $21.41

  View options

• 

  View options

  KWS-912V USB Boost Converter 5V to 9V or 12V Cable Set

  Keep a compatible router running from an external battery when mains power is unavailable with the KWS-912V USB boost converter cable set. It converts a 5V USB power supply to either 9V or 12V output, selected using the built-in switch. An LED display shows the selected output voltage, helping you check the setting at a glance. The compact design supports plug-and-play use with 5V-powered devices, including routers, small fans, desk lamps, solar panels, USB power packs, and power adapters. Selectable output: Choose 9V or 12V with the switch. LED display: View the output voltage value while using the converter. Compact format: Small and convenient for practical everyday use. Use this USB boost converter to power a compatible router or other 5V-supplied device from an external battery. Specifications Model: KWS-912V Input: 5V USB power supply Output: 9V or 12V Output selection: Switch Voltage indication: LED display Use: Router, small fan, desk lamp, solar panel, USB power pack, and power adapter Features: Plug and play, compact design, easy to use Packaging Individual package weight: 0.05 kg / 0.11 lb Individual package size: 14.5 × 9.4 × 1.5 cm / 5.71 × 3.70 × 0.59 in Quantity per carton: 500 pieces Carton weight: 17.00 kg / 37.48 lb Carton size: 90 × 74 × 15 cm / 35.43 × 29.13 × 5.91 in 20GP loading: 266 cartons × 500 pieces = 133,000 pieces 40HQ loading: 619 cartons × 500 pieces = 309,500 pieces Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 14.5cm * 9.4cm * 1.5cm / 5.71inch * 3.7inch * 0.59inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 90cm * 74cm * 15cm / 35.43inch * 29.13inch * 5.91inch Loading Container 20GP: 266 cartons * 500 pcs = 133000 pcs40HQ: 619 cartons * 500 pcs = 309500 pcs

  Read more less

  $23.49

  View options

• 

  View options

  WS-03 USB 3.0 Multiport 4K HDMI VGA DVI Ethernet Adapter

  Expand one USB connection into practical options for displays, networking, and USB devices with the WS-03 USB 3.0 Multiport Adapter. Its aluminum alloy shell houses HDMI, VGA, DVI, USB 3.0, and 100M RJ45 Ethernet ports in one compact adapter. Connect the HDMI output to an HDTV, monitor, projector, display, or TV for 4K video support with backward compatibility. The adapter also supports 1080P HD and allows VGA, HDMI, and RJ45 network ports to be used at the same time. Driver installation is not required, making setup straightforward for office presentations or everyday screen use. Specifications Model: WS-03 Product type: USB 3.0 multiport adapter Housing material: Aluminum alloy Ports: HDMI, VGA, DVI, USB 3.0, and RJ45 Ethernet HDMI support: 4K, with backward compatibility Video support: 1080P HD Ethernet: 10/100 Mbps Simultaneous use: VGA, HDMI, and RJ45 ports can be used together Driver requirement: No driver installation required Packaging One package weight: 0.07 kg / 0.16 lb One package size: 15 × 8 × 2 cm / 5.91 × 3.15 × 0.79 in Quantity per carton: 416 pieces Carton weight: 30.00 kg / 66.14 lb Carton size: 90 × 59 × 18 cm / 35.43 × 23.23 × 7.09 in 20GP loading: 278 cartons × 416 pieces = 115,648 pieces 40HQ loading: 647 cartons × 416 pieces = 269,152 pieces Use the WS-03 to connect multiple display, network, and USB devices through one USB 3.0 adapter. Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 416 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 59cm * 18cm / 35.43inch * 23.23inch * 7.09inch Loading Container 20GP: 278 cartons * 416 pcs = 115648 pcs40HQ: 647 cartons * 416 pcs = 269152 pcs

  Read more less

  $43.90

  View options

• 

  View options

  2x4 USB Switch for Two PCs Sharing Four USB Devices

  Share one set of USB devices between two computers with this 2x4 USB switch. Connect a keyboard, mouse, printer, USB flash drive, or other USB device, then switch control between the two PCs without repeatedly unplugging cables. Use the switch to share a printer between two computer systems, or transfer files from a USB flash drive without removing it from the setup. A standard USB backup power port can supply power to a mobile hard drive, mobile phone, or other supported device. Plug and play: The hardware design requires no driver or software installation. Operating system support: Compatible with Windows 7, Windows 8, Windows 10, Vista, Linux, and Apple Mac. Power-failure memory: The built-in switching chip remembers the last selected host port after power is restored. This USB switch helps two computers share four USB devices for office work, file transfers, and printer access. Specifications Product type: 2x4 USB switch Computer support: Two computers USB device support: Four shared USB devices Supported devices: Printer, keyboard, mouse, USB flash drive, mobile hard drive, and mobile phone Installation: Plug and play; no driver or software installation required Operating systems: Windows 7, Windows 8, Windows 10, Vista, Linux, and Apple Mac Additional function: Standard USB backup power interface Memory function: Remembers the last host port after power failure Packaging One package weight: 0.22 kg / 0.49 lb One package size: 17 × 10 × 5 cm / 6.69 × 3.94 × 1.97 in Quantity per carton: 40 pieces Carton weight: 8.80 kg / 19.40 lb Carton size: 40 × 34 × 20 cm / 15.75 × 13.39 × 7.87 in 20GP loading: 980 cartons × 40 pieces = 39,200 pieces 40HQ loading: 2,275 cartons × 40 pieces = 91,000 pieces Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 17cm * 10cm * 5cm / 6.69inch * 3.94inch * 1.97inch Qty per Carton 40 Carton Weight 8.80kgs / 19.40lb Carton Size 40cm * 34cm * 20cm / 15.75inch * 13.39inch * 7.87inch Loading Container 20GP: 980 cartons * 40 pcs = 39200 pcs40HQ: 2275 cartons * 40 pcs = 91000 pcs

  Read more less

  $31.34

  View options

• 

  View options

  USB C To Mini DisplayPort Adapter For MacBook 12 Inch

  Connect a MacBook 12 inch or other compatible USB-C device to an external Mini Display interface with this USB C to Mini DisplayPort adapter. Its USB 3.1 Type-C male connector links to a Mini Display female output for use with an external monitor, projector, or TV with a DVI HD interface device. The golden aluminium alloy shell gives the adapter a compact, portable design. USB 3.1 Type-C data transfer reaches up to 10Gbps. It is compatible with the MacBook 12 inch, Chromebook Pixel 2015, Nokia N1, and other compatible devices. Connection: USB 3.1 Type-C male to Mini Display female. Portable format: Easy to use and carry. Display use: Connects to external HD Mini Display equipment. Use this adapter to connect compatible USB-C devices with external display equipment. Specifications Product type: Adapter Connector: USB 3.1 Type-C and Mini Display Material: Aluminium alloy Colour: Golden Data transfer rate: Up to 10Gbps Size: 17.8 × 2.2 × 1.1cm Weight: 21g Compatibility MacBook 12 inch Chromebook Pixel 2015 Nokia N1 Packaging Package weight: 0.05kg / 0.11lb Package size: 21.4 × 13 × 1.3cm / 8.43 × 5.12 × 0.51in Quantity per carton: 100 pieces Carton weight: 3.80kg / 8.38lb Carton size: 40 × 24 × 28cm / 15.75 × 9.45 × 11.02in Loading container: 20GP: 992 cartons × 100 pieces = 99,200 pieces; 40HQ: 2,303 cartons × 100 pieces = 230,300 pieces General Types Adapter Connector USB 3.1 Type-C, Mini Display Material Aluminium Alloy Size 17.8x2.2x1.1cm Weight 21g Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 21.4cm * 13cm * 1.3cm / 8.43inch * 5.12inch * 0.51inch Qty per Carton 100 Carton Weight 3.80kgs / 8.38lb Carton Size 40cm * 24cm * 28cm / 15.75inch * 9.45inch * 11.02inch Loading Container 20GP: 992 cartons * 100 pcs = 99200 pcs40HQ: 2303 cartons * 100 pcs = 230300 pcs

  Read more less

  $21.35

  View options

Show more products