Everything your vehicle needs in one place. Syndmart's Automotive collection covers car electronics, exterior and interior accessories, maintenance tools, and safety gear for drivers who want performance, style, and peace of mind on every journey.
Drive better, drive smarter. Fast worldwide shipping.
Dual-Color Car Fog Lights are supplied as a 2-pack for night driving. The design is simple and installation is straightforward, with an aluminum housing for durability. Designed for night driving in fog and other low-visibility conditions, helping you see the road ahead more clearly without relying on high beams. Dual-color lighting modes provide flexible illumination for varying weather and road conditions. Aluminum housing aids heat dissipation and resists impact. Low power consumption reduces load on the vehicle electrical system. Shock-resistant construction stands up to bumps and vibrations. Long life with reduced heat generation supports reliable operation. Includes two lights for easy front-end installation. Specifications: Material — Aluminum. Package — 2 pieces. Fit: Designed for fog-light housings that accept standard automotive fog lights; verify compatibility with your mounting points.
This Car LED Headlight And Fog Light is designed for everyday driving with a simple, compact form and straightforward installation. With an aviation aluminum 6063 housing and a wide 9–32V operating range, it is suitable for most cars, trucks, and SUVs, providing a practical lighting upgrade without extra power draw. Use it to replace aging headlights or fog lights, improve visibility in rain or dusk, and add reliable illumination for daily driving. Light source: 3575 Chip Housing: Aviation Aluminum 6063 Voltage: 9–32V DC Color temperature: 6500K Brightness and power: 8000 LM per light, 26W per light Protection: IP68 waterproof and shock resistant Compatibility: Applicable to all vehicle models Fit: Compatible with most vehicles featuring a 9–32V electrical system; suitable for all models.
$19.19
The Car Emergency Strobe Light is a compact, ultra-thin 12-LED side lamp designed to enhance visibility on a range of vehicles. It operates on 12–24 V DC and is quick to install in tight spaces. Use it as a roadside warning beacon for cars, motorcycles, pickups, ships, and freight vehicles. It provides a clearly visible signal during breakdowns, accidents, or stationary work zones. 12 high-brightness LEDs in a slim, ultra-thin housing. Voltage range: DC 12–24 V to fit most vehicles. Multi-mode operation with selectable flashing patterns. 3-wire wiring: black negative, red positive, yellow variable light. Socket type: 3-wire configuration for straightforward wiring. Compact size minimizes obstruction on sides or bumpers. Compatible with cars, motorcycles, pickups, ships, and freight vehicles. Light specifications: 12 LEDs provide a bright warning signal. The yellow wire controls variable light to change modes without an external controller. Fit and compatibility: designed for 12–24 V electrical systems and straightforward mounting on vehicle sides or bumpers.
This Car Rearview Mirror LED Turn Signal Streamer is a pair of slim, attach-to-mirror lighting strips designed to enhance turn signal visibility for daytime and adverse weather conditions. It operates from a 12V automotive electrical system with a total power draw of 12W. The strips are bendable to fit multiple mirror shapes and installation positions. Use on the outer edge of the rearview mirror for additional signaling that stays within the driver's line of sight. The LEDs remain bright in rain, at night, and in fog, helping other drivers notice your intentions. Power: 12V DC, total consumption 12W Flexible, bendable design to fit multiple mirror shapes and angles Wiring: White to steering input, Black to ground, Red to power Dimensions: 15x1 cm and 19x1 cm LED beads with steady color rendering and long life Specifications: Input voltage 12V, power 12W, dimensions 15x1 cm and 19x1 cm. Installation location: rearview mirror. Fit: Suitable for most vehicles with standard rearview mirror mounting and a 12V electrical system.
$18.03 - $18.35
Trailer Side Tail Light with 6 LEDs for trailers and trucks. Built from durable ABS plastic, it measures 12x3x2 cm and weighs about 30 g per piece with screws. This light serves as a rear position light or tail light, suitable for most trailers, trucks, and buses. It provides reliable illumination in wet conditions and easy replacement for worn units. ABS plastic housing for durability and impact resistance 6 LEDs with a light guide effect for even illumination IP67 waterproof rating for reliable performance in rain Voltage range 10–30 V; brightness increases with voltage (commonly 12–24 V) Screw spacing 10.5 cm; includes mounting screws and a rubber pad Suitable as position light or tail light on trailers, trucks, buses Connection: black wire is negative; connect yellow wire to bright yellow light. Includes lamp, self-contained rubber pad, and screws. Fit: Compatible with most buses, trucks, and trailers using 12–24 V systems; ensure mounting holes match 10.5 cm spacing.
This red trailer tail light is designed for straightforward installation on trucks, trailers, vans, and light construction vehicles. It operates on 12V DC and uses an LED light source. Use it to replace worn tail lights or outfit a new trailer, with a compact housing measuring 21.5 x 9.5 x 5.3 cm. Material: PC (polycarbonate) Light source: LED Voltage: 12V DC Color/appearance: Red lens; color temperature 2000–4000K Size/weight: 21.5 × 9.5 × 5.3 cm; net 330 g (gross 370 g) Compatibility: Suitable for pick-up trucks, trailers, vans, and construction vehicles with 12V systems Note: Includes tail light only; no additional components Specifications: Color temperature 2000–4000K; LED light source; 12V DC operation. Fit: Designed to fit standard tail-light openings on compatible trucks and trailers.
$22.26
Car LED Streamer Hood Lights deliver ambient lighting along the hood edge, providing a subtle decorative glow with a straightforward, non-destructive installation. Use them for engine bay ambiance while parked, daytime running accent lighting, or quick checks at night without rewiring your vehicle. Material: PVC silicone with high temperature resistance and antifreeze crack protection Length options: about 1.5 m or 1.8 m to fit different hood gaps Electrical specs: 12 V input, 2 A current, 6 W power, 1200 lm luminous flux Remote: included button battery for easy on/off and mode selection Protection: IP678 sealed design for rain and dust resistance Installation: direct attachment in the engine gap; no wiring changes or drilling required Light specifications: 1200 lm, 6 W, 12 V, 2 A. IP678 rating. Available lengths: 1.5 m or 1.8 m. Fit and compatibility: designed for 12 V automotive electrical systems; suitable for vehicles with hood gaps that accommodate the 1.5 m or 1.8 m lengths, with simple, non-destructive mounting.
$20.48 - $20.51
12-24V LED Truck Side Tail Light designed for daily vehicle use. Made from ABS, it measures about 16.4 x 5.5 x 2.2 cm and weighs about 60 g. Ideal for trucks, trailers, and engineering vehicles, this tail light supports 12-24V DC systems and includes mounting screws for straightforward installation. ABS body offers corrosion and high-temperature resistance. Compact size: 16.4 x 5.5 x 2.2 cm; weight approx. 60 g. DC 12-24V operation with 16 LEDs and a color temperature of 2000–4000K. Two-wire or three-wire wiring options: black negative, yellow positive; white for low/high light in 3-wire mode. Screws included for quick, secure installation. Waterproof and rainproof construction for outdoor use. Light specifications: 16 LEDs provide steady illumination with a color temperature range of 2000–4000K. Fit: designed for 12-24V vehicle systems; verify mounting points and wiring compatibility before install.
$17.36
2-Pack 12/24V LED Edge Tail Lights are compact, weather-resistant lights for trucks, trailers, and industrial vehicles. Each light uses a polycarbonate housing with 8 LEDs and measures about 12 × 4 × 2 cm. Designed for trucks, trailers, and construction equipment, these edge lights handle outdoor use. The waterproof and anti-fog design helps maintain visibility in rain, dust, and mud. DC 12–24V operation for compatibility with common truck, trailer, and equipment circuits. Each light contains 8 LEDs for bright, even illumination. Color options include red and yellow for signaling. Polycarbonate housing is waterproof and anti-fog. Includes mounting screws for quick installation. Three-wire harness: black to negative, yellow to positive, third yellow flashes for 2 seconds at power-up. Specifications: Size 12 × 4 × 2 cm per piece; weight ~70 g per pair; color temperature 2000–4000K. Fit: Compatible with 12/24V electrical systems on trucks, trailers, and engineering vehicles; check mounting hole spacing.
$18.94
LED Strobe Warning Light Blue, model SL-97, is a compact 12V DC beacon designed for security and engineering use. The blue LED array provides clear signaling in challenging environments. Ideal for field signaling on road cones, warning columns, guardrails, and construction sites. It supports continuous operation in dusty or harsh conditions and is suitable for mounting on various warning devices and emergency bikes. Model SL-97 LED strobe beacon with blue light 12 V DC input; current 30–50 mA depending on mode 15 high-brightness LEDs; strobe ≤120 flashes per minute; 2 flashes per second Size 7.2 x 4 cm; runtime up to 36 hours; service life ≥1000 hours Explosion-proof and dust-proof construction; field-ready mounting on cones, guardrails, and poles Visible range up to 200 meters at night Light specs: 12 V DC operation; 36 hours continuous operation; 200 m visibility; 15 LEDs for consistent flash Fit: Designed for direct mounting on standard road cones, telescopic cones, warning columns, and related fixtures with compatible brackets.
The 17cm Waterproof Daytime Running Light DRL LED Car Lamp is a compact, aluminum DRL designed for the Audi A6 2016. It uses a high-brightness LED sheet and a slim profile to fit tight spaces while delivering reliable daytime illumination. Use-case: For daytime driving, it enhances visibility and helps other road users notice your vehicle without glare. Dimensions and weight: 170 mm length, 15 mm width, 6 mm thickness; ~0.1 kg; aluminum housing and heat-insulated LED sheet. Color options: white, blue, or ice blue; shells black or silver. Electrical: DC 10–16 V; ~0.17 A; overload protection up to 18 V (≈1 h). Light output and temp: 6000–8000 K; symmetric left/right output; surface ~40 C at 20–30 C ambient. Durability: waterproof with environmental protection and flame-retardant construction; continuous operation up to 1000 hours; current drift ≤2 mA. Installation: direct ACC circuit connection; genuine 3M adhesive; clean surface, apply adhesive, then heat-activate for mounting. Fit: Compatible with Audi A6 2016 models; designed to install in DRL positions with standard mounting.
This 4 In 1 Car Grille LED Lights kit provides compact, grille-mounted illumination for 12V vehicles. Connect to standard vehicle wiring and use the remote to switch between lighting modes for four LED clusters. Four 3-LED clusters driven by a single host for even grille lighting. LED color temperature: 6500K (cool white) for bright, clear visibility. Wireless remote control to change modes without wiring changes. ABS housing with compact dimensions: 7 x 1.5 x 3 cm. Electrical specs: input power 16W, LED output 24W, voltage 12V DC, current 0.1A. Long service life: over 100,000 hours. Simple wiring connection designed for 12V automotive systems. Material: ABS. Size: 7x1.5x3 cm. Color temperature: 6500K. Voltage: DC 12V. Current: 0.1A. Light source: LED. Light source power: 24W. Lifespan: >100,000 hours. Fit: Designed for 12V automotive systems; its compact footprint fits a wide range of grille openings.
$21.35
Strobe Car LED Fog Light Pair is a practical lighting upgrade for everyday driving. These LED fog lights are designed to improve visibility in poor weather and low-light conditions. Use them in fog, heavy rain, or early morning commutes to enhance forward visibility and reduce glare. They provide a steady, reliable beam to help you navigate tougher road conditions. Easy plug-and-play installation with standard wiring; no specialty tools needed. LED elements provide a bright, evenly dispersed fog beam with reduced glare. Weather-resistant housing and sealed connectors for year-round use. Low power consumption and long service life for daily driving. Compatible with common 12V automotive electrical systems. Includes two fog lights for symmetrical illumination. Light specifications can vary by model; expect consistent brightness and dependable performance over time. Fit: Compatible with vehicles that have standard fog-light mounting points. Please verify mounting and electrical compatibility for your make and model.
The Vehicle Side Marker Light is a 12V ABS unit designed for trucks, trailers, buses and wagons. Its compact housing fits standard side marker openings and supports clear signaling on low-light road conditions. Use it for side lights and taillight signaling on commercial fleets, RVs, or utility trailers. The plug-and-play design simplifies installation for DIY repairs or fleet maintenance. 6 SMD LEDs provide clear, even illumination. ABS housing with a 96 × 20 mm lens and a compact 100 × 20 × 8 mm body. 12V DC operation with low current draw. 28 cm cable length offers flexible mounting and wiring options. Weight approx. 150 g; designed for durability and long life. Suitable for buses, trucks, trailers, and wagons. Specifications: Voltage 12V; LED count 6SMD; Size 96 × 20 mm; Dimensions 100 × 20 × 8 mm; Weight 150 g; Cable length 28 cm. Fit: Compatible with 96 × 20 mm mounting openings on heavy vehicles; straightforward mounting.
Solar-Powered Car Warning Taillights with self-adhesive backing provide a no-wiring solution for rear visibility. The ABS body houses bright LEDs and a built-in solar panel that charges in daylight. Use it to add a conspicuous warning light on parked or slowly moving vehicles, improving roadside visibility without modifying the car's electrical system. Material and light source: ABS body with high-brightness LED beads. Power and installation: solar-powered; built-in panel charges in daylight; no wiring required. Adhesive mounting: automotive adhesive offers non-destructive, paint-safe attachment. Weather protection: waterproof and sunproof; sealed lens resists water ingress in wind and rain. Operation: independent adjustment button; press and hold in darkness to illuminate; if not lit, place in direct sunlight for several hours to recharge and retry. Dimensions: 8.5 x 2 x 2 cm; compact and unobtrusive. Light specifications: solar panel powers a compact LED array suitable for daytime charging and nighttime warning. Fit: adheres to flat, clean exterior surfaces; suitable for most vehicles with flat panels.
A practical roof-mounted indicator light for vehicles, the Taxi Indicator Light with USB Port offers a compact, reliable signaling solution for taxis and private cars. Power options include USB or cigarette lighter port, and an on/off switch provides simple control during operation. Power: 3W using 5V USB input Current: 0.25A; Light type: surface-mount (SMT) LED Model: 28356; Size: ~19 x 6.3 cm; Weight: ~52 g Power options include USB port or cigarette lighter for flexible installation On/off switch enables easy activation and deactivation Energy-efficient design supports long service life and stable operation Specifications: Voltage 5V USB; Current 0.25A; Power 3W; Light model 28356; Size about 19 x 6.3 cm; Weight about 52 g. Fit: Compatible with most passenger cars and roof mounting options.
The Car Modification LED Warning Lights 4 Light Module is a compact signaling unit with an aluminum alloy body. It operates within a 9–24V system, and its rugged construction is designed for use in everyday driving and roadside situations. Ideal for use when visibility is reduced by rain or fog, or during roadside parking, it provides conspicuous warning signals to nearby drivers. The four LEDs offer multiple flashing patterns to suit different conditions and local regulations. Material: aluminum alloy Voltage: 9–24V IP65 rated for waterproof and shockproof operation 4 high-intensity LEDs with multiple flashing patterns Mounts on grille or bumper Low energy consumption to reduce power draw Durable, weather-resistant construction Light specifications: Body material—aluminum alloy; electrical rating—9–24V input; protection rating—IP65; LED count—4; selectable flash patterns. Fit: Designed to install on grille or bumper and compatible with 9–24V electrical systems.
Engineered for automotive use, this LED turn signal light combines a durable aluminum housing with an integrated high-speed fan for stable operation in warm conditions. Designed for straightforward replacement on 12–24V vehicle electrical systems, the plug-and-play design means no wiring changes or extra decoders are required. Aluminum housing with an integrated LED light source for durable performance. Nine-blade high-speed fan provides active cooling to reduce heat buildup. 25W light source, compatible with 12–24V DC systems common in cars and light trucks. Large groove heat sink design on the light body accelerates heat dissipation. Plug-and-play installation; no wiring modifications or decoder resistors needed. Specifications: Light source power 25W; Voltage 12–24V; Dimensions 45×20 mm; Weight 30 g per piece. Fit: Compatible with 12–24V automotive LED turn signal sockets and housings; verify 45×20 mm dimensions for a proper fit.
The S25 30-SMD LED bulb offers a compact, cool white lighting option for automotive use. It’s designed for 1156/1157 sockets and operates across a wide voltage range. Ideal for reversing lights, brake lights, and turn signals, it provides 360-degree illumination with a uniform beam, reducing shadows in the rear lighting. Model: S25 with 30 SMD LEDs for bright, even output Socket compatibility: fits 1156/1157 housings Color: 6000–6500K cool white Voltage and power: 9–28V input, 6W Durability: operational from -70 to 105°C, IP68 waterproof Dimensions: 35 × 18 mm, compact form factor Specifications: 6W; 9–28V; 360° beam; IP68; -70–105°C; 35×18 mm. Fit: compatible with 1156 and 1157 sockets commonly used in passenger vehicles.
7 Inch A-pillar Roof Light with high and low beam provides focused forward illumination and ambient side lighting for off-road driving. Designed for night trails and work-site use, it mounts on the A-pillar and supports straightforward wiring for operation. High brightness with long-range forward illumination IP67 waterproof rating for use in wet conditions Dual beam functionality: high beam and low beam Ambient lighting plus side lights to improve visibility Simple installation: connect the wiring harness for immediate use Durable materials aimed at extended service life Size: approximately 18 x 19.8 x 9.3 cm Light specifications: 7 inch housing with dual-beam capability; compact footprint for A-pillar mounting. Fit: suitable for A-pillar roof-light mounting on select SUVs and pickups, including Wrangler, Great Wall Poer, Raptor, and Ford models.
$119.41
Two-pack Wrangler Plum Blossom Yellow LED Turn Signals offer a practical plug-in upgrade for Jeep Wrangler front signals. They simplify installation and resist harsh driving conditions. Ideal for replacing aging indicators or upgrading visibility on daily drives and off-road trips in challenging weather. 12V DC operation 83 LEDs (total approx. 8.3W) 2000K warm plum blossom yellow light ABS injection-molded housing; waterproof, dustproof, shockproof Quick plug-in installation; front grille location Service life up to 50,000 hours Specifications: Light source: LED; Power: ~8.3W; Color temperature: 2000K; Material: ABS injection molding; Installation location: front grille turn signal; Voltage: DC 12V; Service life: 50,000 hours; Weather resistance: waterproof, dustproof, shockproof. Fit: Designed for Jeep Wrangler front grille turn signal locations; this two-pack provides matching indicators with a simple plug-in connection to 12V systems.
$29.53 - $31.17
The 7-inch LED Headlight is a durable, plug-and-play lighting solution for everyday driving and off-road use. It fits a range of vehicles—from pickups to SUVs and boats—providing reliable illumination in varied weather and terrain. 7-inch LED headlight module with plug-and-play installation for quick, tool-free setup. IP67 waterproof and dustproof construction withstands rain, splashes, and dusty roads. 30° adjustability helps aim the beam for highway visibility and off-road clarity. Durable bipolar design provides shock resistance for rough terrain and bumpy drives. High brightness with long lifespan supports dependable nighttime visibility. Size about 18 x 19.8 x 9.3 cm; suitable for standard 7-inch openings. Light specifications: 7-inch LED module; dimensions about 18 × 19.8 × 9.3 cm; IP67 rated. Fit: Compatible with Wrangler, Land Rover, Hummer, Great Wall Poer, Tank 200/300, and Ford F-150 7-inch mounting spaces.
$124.20
Solar-Powered Roof Warning Light in yellow is a self-contained beacon designed for trucks. It relies on a built-in solar panel to stay bright with no external power source needed. Use it on fleets, service vehicles, and construction trucks to improve visibility on highways, job sites, and loading areas. It operates independently, reducing wiring and maintenance concerns. Waterproof design for use in rain, snow, and dusty environments Built-in solar panel powers the unit from ambient sunlight, no external power source No wiring required; simple, tool-free installation Removes cleanly without leaving adhesive residue Material: ABS; Color: Yellow; rugged and impact-resistant construction Designed for truck roof mounting and compatible with common truck setups Specifications: Material: ABS. Color: Yellow. Waterproof design. Solar-powered, self-contained unit. Fit: Designed for standard truck roof mounting configurations.
$18.77
Two-pack solar-powered anti-collision warning lights provide vehicle visibility without wiring. Featuring RGB color-changing LEDs in a durable PC housing, they offer versatile signaling. Operation is simple: press to turn on, long-press to turn off, and short-press to switch modes. Ideal for cars, SUVs, and trucks on city streets or rural roads, they mount on flat exterior surfaces such as bumpers or hoods with minimal effort. The waterproof, sealed design withstands rain and splashes. RGB color-changing LED beads for high visibility Solar charging, no wiring required; automatic light sensing Residue-free double-sided tape for damage-free installation Durable PC housing with eco-friendly materials Size about 9.8 x 2.8 x 1.4 cm per unit Weatherproof design for rain and wet conditions Light specs: RGB LEDs provide color-changing signaling. Each unit measures 9.8 x 2.8 x 1.4 cm; solar panel charges during daytime for battery-free operation. Fit: Suitable for most vehicles with flat exterior surfaces; attaches with residue-free tape and removes cleanly without marks.
$17.38
