This G9 LED bulb is a 220V warm white lamp designed for general indoor lighting in homes and offices. It uses a G9 bi-pin base and a compact form factor for small fixtures and accent fittings. Use it in desk lamps, under-cabinet lights, display cases and pendant fittings where a warm, consistent light is needed. The bulb is suited to enclosed and open fixtures that accept a G9 base and 220V supply. Base: G9 bi-pin, fits standard G9 sockets Voltage: 220V mains compatibility Light color: Warm white for comfortable indoor illumination Performance: Low power consumption and reduced heat output Construction: Solid housing with impact-resistant design Applications: Home, office, exhibition and display lighting Specifications (light): warm white; power draw and lumen output vary by SKU—check product label for exact values. Fit statement: Intended for fixtures with a G9 socket and 220V supply; confirm physical clearance in compact fittings before installing.

Read more less

This USB flash-disk style reading light is a compact, plug-in lamp that draws power from USB-A ports. The white plastic housing is low-profile and designed for use with power banks, laptops, and desktop PCs. Use it for close-up tasks such as reading, keyboard illumination, or low-light repairs. Its small footprint makes it suitable for travel, bedside use, or plugging into an external battery when a wall outlet is not available. Connector: USB-A plug for power banks, laptops, and standard USB ports Form factor: Flash-disk style, compact and portable Material: Durable plastic housing in white Power: 1.5 W consumption for low energy use Light output: 140 lm, suitable for focused reading or task lighting Light specifications: 1.5 W, 140 lm. No battery required; runs from host USB power. Fit statement: Fits standard USB-A ports on most power banks, laptops, and desktop computers; verify port clearance if using angled or recessed USB sockets.

Read more less

This COB LED DIY downlight chip is a 220–240V smart‑IC module for spotlights and recessed fixtures, available in 3W, 5W, 7W and 10W. The integrated IC allows direct mains connection without an external driver. Use it to retrofit existing spotlight or downlight housings for task, accent, or cabinet lighting where driver space is limited. Suitable for DIY projects and small commercial installs that need a compact, directly wired light source. Wattage options: 3W, 5W, 7W, 10W to match lumen needs. Voltage: 220–240V AC direct connection; no external driver required. Color temperature: Cool white 6000–6500K; Warm white 2800–3200K. Beam & color: 120° beam angle; CRI Ra80 for reasonable color rendering. Construction: Aluminum housing for heat dissipation; integrated smart IC protection. Light specs: rated life >10,000 hours; lumen output varies by wattage. Fit statement: verify mounting diameter and thermal path in your spotlight or downlight housing before installation.

Read more less

This 35mm semi-circular LED accent light provides compact, low-voltage illumination for cabinets, display cases and under-shelf task lighting. Its semi-circular profile and slim 35 x 25 mm footprint fit narrow ledges and shallow surfaces. Use it where discreet directional light is needed: inside kitchen cabinets, retail shelves, bookcases or hobby display cases. The 3W, DC 5V LED runs from common USB power sources or low-voltage drivers and connects with two wires (red = +, black = −) for simple installation. Shape & size: Semi-circular profile, 35 x 25 mm for edge or surface mounting Power & voltage: 3W nominal, DC 5V input compatible with USB power or 5V drivers Materials: Aluminum body for heat dissipation, PC diffuser for even light Wiring: Two-wire connection with clear polarity (red/black) Mounting: Slim profile suited to tight clearance and narrow ledges Specifications: 3W, DC 5V, 35×25 mm, aluminum + PC. Fit statement: Suitable for narrow cabinet ledges and small displays; check clearance and power-source compatibility before installation.

Read more less

This DC power male jack to screw-down connector provides a compact, reliable power interface for LED controllers and other two-wire DC devices. Use it when you need quick field wiring or neat enclosure terminations: the 5.5 × 2.1 mm male plug mates with standard DC inputs while the two-conductor screw terminal accepts stripped wires without splicing. Connector type: 5.5 mm × 2.1 mm DC male to 2-conductor screw-down terminal Installation: screwdriver-tightened terminals—no crimping, soldering, or taps required Size: compact 40 × 17 × 14 mm footprint for tight spaces Material/finish: molded plastic housing with metal contact for reliable contact Appearance: clean, low-profile cable termination for enclosures and panels Specifications: Dimensions 40×17×14 mm; compatible with standard 5.5×2.1 mm DC plugs. Fit: fits 5.5×2.1 mm DC inputs and two-wire DC devices such as LED controllers and cameras.

Read more less

Compact USB reading light with a magnetic base and warm-white LED for close-up tasks. Lightweight and portable, it connects via USB-A and offers three brightness levels for focused, soft illumination. Use it clipped to a book, attached to a metal headboard, or plugged into a power bank, laptop, or wall charger for hands-free reading, studying, or travel. The magnetic base and clip allow stable positioning on metal surfaces or thin panels. Three brightness modes — low, medium, high for adjustable task lighting. USB powered — 5V input, 2W consumption; compatible with power banks and USB chargers. Magnetic base + clip — mounts to metal surfaces or clips to pages and edges. Warm white LED — soft flood-style light to reduce glare during close work. Compact design — lightweight for travel and bedside use. Specifications: Warm white color temperature; USB-A connector; 5V/2W. Fit: Suitable for readers, students, commuters, and anyone needing a small, USB-powered task light with secure magnetic attachment.

Read more less

Adhesive iron sheet plate sticker provides a compact, flat mounting surface for magnetic phone holders and small magnetic accessories. The thin iron plate pairs with a nano double-sided adhesive for discreet placement on many surfaces. Use it to attach a magnetic car mount, induction or cabinet light, router holder, or small decorative frame without drilling. Suited for kitchens, vehicle interiors, rental walls, and DIY workshops where a low-profile mount is needed. Size: 35 × 45 × 0.3 mm plate with 0.5 mm nano adhesive Material: non-magnetic iron plate that magnets adhere to Surface compatibility: walls, wood, glass, tile, metal, PVC, painted surfaces, fabric, plastics Temperature resistance: designed for warm environments such as kitchens Removal: designed to peel off cleanly with minimal residue Specifications: Iron plate; adhesive thickness 0.5 mm. Fit: Compatible with most flat magnetic mounts and accessories for indoor and vehicle use.

Read more less

This 2m USB power cable with on/off button provides a straightforward way to power USB-powered LED light strips from wall adapters, power banks, or computer USB ports. Use it for under-cabinet lighting, desk task lights, or display backlighting where an inline switch and longer reach simplify installation and daily use. Length: 2 m cable for flexible placement and routing. Switch: Inline on/off button for quick control without unplugging. Conductors: 22 AWG pure copper for stable current delivery. Durability: PVC jacket and TPE-reinforced connector reduce bending stress. Connector: Nickel-plated USB-A plug resists corrosion and temperature changes. Light specifications: Outer diameter 3.5 mm; USB-A male plug; compatible with standard 5 V USB power sources. Fit: Designed for LED strips that accept USB-A power; works with USB adapters, power banks, and PC ports.

Read more less

The 14 Key RF Timer Dimmer is a compact controller for 5–12 V LED strip installations, offering timed on/off scheduling and stepless dimming via an RF remote. The unit measures 86 x 40 x 7 mm and weighs about 35 g for discreet placement. Use it for cabinet lighting, under-shelf accents, backlighting or small DIY mood-light projects where remote access and a built‑in timer simplify operation. The RF remote does not require line‑of‑sight, useful for hidden installations. 14-key RF remote: timer, brightness presets, on/off and memory functions. Wide input range: DC 5–12 V compatibility with common LED strip power supplies. Output capacity: up to 30 W at 5 V and 72 W at 12 V for single-circuit strips. Compact footprint: fits inside cabinets or behind fixtures for concealed mounting. Operating range: -20 to 60 °C suitable for indoor domestic or workshop use. Specifications: DC head input, single output circuit, built‑in button cell in remote. Fit: Compatible with most 5–12 V LED strips using standard DC connectors; check strip power to match output capacity.

Read more less

The Intelligent RF Wireless Dimmable LED Strip Light Controller provides wireless PWM dimming for single-channel LED strips. It accepts 5–24V DC input and supports up to 6A load, enabling hands-off brightness control with a compact RF remote. Use this controller for under-cabinet lighting, TV backlighting, or ambient zones where a single dimmed strip is needed. The RF remote removes line-of-sight constraints and the 1 m lead wire simplifies mounting behind furniture or inside cabinets. Voltage compatibility: 5–24V DC (works with common 5V, 12V, 24V LED strips) Load capacity: max 6A (5V ≤30W, 12V ≤72W, 24V ≤144W) Dimming: PWM dimming via RF remote for smooth brightness control Remote: 86 × 40 × 7 mm, ~40 g; built-in button battery Power draw: standby <1W Specifications: operating temperature −20 to 60°C; wire length 1 m; single output channel. Fit: Designed for indoor 5–24V LED strip installations in kitchens, living rooms, and home theaters requiring zone-specific dimming.

Read more less

The 6-Button DC Controller Infrared Dimmer is a compact controller for single-color LED strips that accepts 5–24V DC and uses an infrared remote for brightness control and power on/off. Use this dimmer for under-cabinet lighting, coves, display shelving, or narrow ceiling coves where a low-profile controller and remote operation are needed. It works with standard non-addressable LED strip installations and supports common-anode wiring. Compact size: controller 53 × 7 × 6 mm; remote 65 × 24 × 11 mm for tight installations. Voltage: 5–24V DC input, compatible with typical 12V/24V LED setups. Compatibility: single-color strips 5050, 2835, 3528, 3014, 5730. Control: six-button infrared remote, up to 10 m range, smooth dimming and on/off. Durability: operating −20 to 60°C; protection level IP258. Light specifications: non-addressable single-color LED strips, common-anode connection, DC head interface. Fit statement: designed for narrow ceilings and confined spaces where discreet, remote dimming is required.

Read more less

The ARGB to SATA Power RGB Lighting Controller Cable supplies and controls 5V ARGB lighting from a standard SATA power source when a motherboard ARGB header is unavailable. Use case: ideal for PC builders who want independent ARGB control of case fans or LED strips without modifying the motherboard. It lets you add or replace lighting in mid-tower and compact builds where headers are limited. Power & signal: SATA 15‑pin input to 5V ARGB 3‑pin output for direct LED control. Controls: M (mode), C (color), S (speed); long-press S toggles lights on/off. Material: tinned copper conductor for stable contact. Size & weight: ~70 cm length, 16 g—easy routing and light on cables. Expandable: supports Y‑type adapters (not included) to drive multiple ARGB devices. Specifications (light): SATA 15PIN; ARGB 5V 3PIN; length ~70 cm; weight ~16 g. Fit statement: designed to fit most mid‑tower layouts and tuck behind panels for clean cable management.

Read more less

The 30W USB Power Adapter with Monitoring LED provides compact, everyday charging for phones, tablets, wearables and small electronics. It combines a USB-A 5V 2.1A port with selectable DC barrel outputs and a front LED for status indication. Use it at home or on the road to replace multiple chargers. The wide AC input (100–240V) and six barrel-tip sizes make it suitable for varied devices without carrying extra adapters. Output: 30W total; USB-A 5V 2.1A plus selectable DC outputs. DC tips included: 5.5×2.5, 5.5×2.1, 4.0×1.7, 3.5×1.35, 3.0×1.1, 2.5×0.7 mm. Input: AC 100–240V, 0.25A, 50/60Hz for international use. Safety: Built-in short-circuit, overload and overvoltage protection. Design: Compact housing, 1.2 m power cord, low operating temperature. Light spec: Monitoring LED shows charging status without being distracting in dim settings. Fit: Compatible with devices that accept the included barrel tips or USB-A 5V 2.1A charging.

Read more less

This 10-piece E12 to E14 socket adapter set converts US-style E12 candelabra sockets to European E14 sockets so E14 LED bulbs can be used in fixtures with smaller bases. The adapters are socket converters only and do not change voltage. Use in chandeliers, ceiling mounts, wall sconces, or decorative lamps where E14 LED bulbs are desired but the fixture has an E12 thread. Ideal for retrofit situations where rewiring is not practical. Set: 10 adapters for multiple fixtures or spares. Material: Flame-retardant body with copper-plated nickel contacts. Electrical: Rated 110–250 V, 3 A (does not transform voltage). Temperature: Heat resistance up to 150°C for normal lamp operation. Size & installation: Compact, lightweight, screw-in installation into standard E12 sockets. Specifications: main material copper-plated nickel; package includes 10 adapters. Fit: Suitable for fixtures with E12 sockets needing E14 LED bulbs; verify physical fit and compatibility before use.

Read more less

This AC to DC power adapter delivers a regulated 5V DC at 1A for small electronic devices. It accepts 100–240V AC input and is available with EU or US plug options for regional compatibility. Use it to power compact gadgets such as portable routers, IP cameras, Bluetooth speakers, single-board computers, and other accessories that require a 5V/1A barrel connection. The adapter’s wide input range supports travel between regions when you select the correct plug version. Output: 5V DC, 1A (5 W) for consistent low-power supply. Input range: 100–240V AC, 50–60Hz for international mains compatibility. Connector: Barrel plug Ø5.5 mm outer / Ø2.5 mm inner, center-positive. Plug options: EU or US plug configurations included at purchase. Protection & indicator: Short-circuit and overload protection with LED power indicator. Light specifications: LED confirms power; polarity marked center-positive. Fit: Fits devices rated 5V 1A with a 5.5×2.5 mm center‑positive barrel jack.

Read more less

Compact AC-to-DC power adapter that converts 100–240V AC (50–60Hz) to 5V DC up to 1 A (5 W). The unit is intended for everyday small electronics requiring a 5V supply with a 5.5 × 2.5 mm barrel plug and inner-positive polarity. Use it to power compact routers, IP cameras, sensors, LED modules, or bedside devices that accept a 5V/1A input. The EU-plug version fits standard European outlets; a US-plug variant is also available for other regions. Input range: 100–240V AC, 50–60Hz for global compatibility Output: 5V DC, up to 1 A (5 W max) Connector: 5.5 mm OD × 2.5 mm ID barrel, inner positive Form factor: Compact desktop adapter, black housing Safety: Short-circuit and overload protection typical for this class Specifications (light): Weight ~60 g, dimensions ~60×40×30 mm, cable length ~1.2 m. Fit: Compatible with devices requiring 5V DC and a 5.5×2.5 mm inner-positive barrel connector.

Read more less

The 3–12V Adjustable Voltage Power Supply is a compact 12W DC adapter for hobby electronics and bench testing. It offers selectable output steps and interchangeable DC heads to match common device inputs. Use this adapter for powering microcontrollers, prototyping boards, LED strips, sensors, and small motors during development or repairs. The 1.5m cord and EU/US plug options simplify bench placement and travel use. Adjustable output: discrete voltages at 3, 4.5, 5, 6, 7.5, 9, 12V Connector set: six DC tips (2.5×0.7 to 5.5×2.5 mm) for broad device fit Safety features: overcharge, overcurrent, temperature, and short-circuit protection Construction: ABS+PC housing with fire-resistant material Input range: AC 100–240V, 50/60Hz (0.25A) Specifications (light): Rated power 12W; cord length 1.5m; output range 3–12V. Fit note: Verify your device's required voltage and connector polarity before use; match connector size to ensure compatibility.

Read more less

AC to DC power adapter for LED strip lights with a 60 cm cable, available in 5V or 24V output and multiple current ratings (3A, 5A, 6A). The adapter accepts 100–240V AC at 50/60 Hz for broad compatibility. Designed for ambient lighting in homes, automotive interiors, retail displays, and event installations. Use it where a compact, enclosed power source with basic protections is required and space is limited. Outputs: 5V DC or 24V DC options to match common LED strip voltages. Current variants: 3A, 5A, 6A to suit different strip lengths and densities. Connector: 5.5 x 2.5 mm barrel plug for standard LED strip adapters. Safety features: overload, short-circuit, and overheating protection. Input range: 100–240V AC, 50/60 Hz for international use. Specifications (light): cable length ~60 cm; accurate voltage delivery under rated load. Fit: compatible with LED strips requiring 5V or 24V DC and a 5.5 x 2.5 mm plug—verify strip voltage and connector before purchase.

Read more less

The COB LED Light Chip is a compact mains-powered module for DIY spotlights and small-area illumination. It connects directly to 220–240V AC and is available in 3W, 5W, 7W, 10W, and 12W variants and two color temperatures. Designed for hobbyists and small-scale installers, the module suits recessed cans, custom track heads, under-cabinet runs, and display lighting where direct-mains installation is preferred. It reduces component count by omitting an external driver. Wattage options: 3W–12W to match brightness and power limits. Color: Cool white 6000–6500K or warm white 2800–3200K. Electrical: 220–240V AC input with integrated smart IC for simplified wiring. Optical: 120° beam angle, Ra80 color rendering. Construction: Aluminum housing for passive heat dissipation. Light specifications: expected life >10,000 hours; no external driver required. Fit: made to install in standard DIY fixtures accepting 220–240V COB modules; ensure adequate ventilation and compatible mounting depth.

Read more less

The WiFi RGB LED Strip Light Controller provides wireless control of compatible RGB LED strips via phone app, voice, or included IR remote. It supports music-synced color changes, dimming, and scene creation for home lighting setups. Use to automate living room bias lighting, bedroom mood scenes, or sync lights with music for small home theaters. Compact size fits behind furniture or in LED channels and can be integrated into daily routines using schedules or voice commands. Connectivity: Built-in WiFi; iOS and Android app control; Alexa voice compatibility. Control modes: App, Alexa, or 24-key IR remote; color, brightness, and rhythm/music modes. Power: DC 5–24 V input; common anode (+); up to 100 W total output. Size & environment: 53 × 24 × 11 mm; operating −20 °C to 55 °C; compact enclosure. Installation note: Align red arrow with black arrow to avoid polarity short. Specifications: Model WiFi+IR 24-key remote RGB LED music controller; works with 5–24 V DC RGB strips. Fit: Designed for common anode RGB LED strips; verify polarity before connecting.

Read more less

The E27 Bulb Holder Extension Socket adds a 20, 30, or 40 cm neck to standard E27 fittings, providing a compact white-and-silver extension for pendant, desk, or ceiling installations. Use this extension to lower or reposition a bulb without rewiring: ideal for renters, DIY lighting projects, or workspaces where adjustable reach and focused task light are needed. Neck length options: 20 cm, 30 cm, 40 cm for adjustable drop and beam control. Compatible socket: accepts standard E27 bulbs (incandescent, LED, CFL within socket rating). Shell material: BPT3 in white with silver accents for a neutral, easy-to-match finish. Plug variants: US plug or EU plug to match regional outlets. Design: lightweight, plug-and-play installation that connects directly to existing E27 fixtures. Specifications: neck lengths 20/30/40 cm; shell BPT3; color white with silver; US/EU plug. Fit: compatible with standard E27 sockets and fixtures designed for extension sockets.

Read more less

The E27 Splitter Adapter 5 In 1 converts a single E27 lamp holder into five independent sockets for flexible multi-bulb lighting in compact areas. Use it to increase light coverage for workbenches, retail displays, or temporary fixtures where additional sockets are needed without rewiring. Each socket moves independently for directional lighting and supports common bulb types. Five independent E27 sockets — each rated up to 60W for LED, incandescent, or CFL bulbs. Flexible positioning — sockets rotate 360° and bend 180° to aim light where required. Wide voltage compatibility — operates on 90–240V mains for international use. Durable materials — flame-retardant PBT housing with aluminum alloy components for heat resistance. Standard base — fits any standard E27 lamp holder or fixture without modification. Specifications: Material: PBT + aluminum alloy; Voltage: 90–240V; Max 60W per socket; 5 sockets total. Fit: Designed for standard E27 lamp holders; check fixture clearance for multiple bulbs.

Read more less

The Minleaf Regulated Power Supply Adapter for Laptops (EU/US) is a universal, adjustable charger that supports 100–240V input and selectable 12–24V output up to 96W. It provides a compact alternative to multiple regional chargers. Use case: carry one adapter for travel, campus, or remote work; swap among eight included tips to power notebooks, mini-PCs, or monitors that accept 12–24V. The adjustable output caters to mixed-device setups without needing different bricks. Adjustable output: 12–24V selectable to match device requirements (up to 96W). Interchangeable tips: Eight tips for broad laptop model compatibility. Wide input: 100–240V AC, 50–60Hz for EU and US regions. Protections: Overload and short-circuit protection for basic safety. Indicators: Power LED shows operational status. Specifications: Output 12–24V, 4–5A, max 96W; input AC100–240V. Fit: suitable for laptops requiring 12–24V input and up to 96W using one of the included tips.

Read more less

This compact AC-to-DC adjustable power adapter provides configurable DC output with a built-in display for straightforward monitoring. Sold as [Brand name or “None”] for identification only. Use it for hobby electronics, small DC motors, LED projects, and DIY chargers where variable voltage and adjustable current matter. The integrated display and long cable simplify bench and field setups. Wide AC input: 100–240 V, 50/60 Hz for international mains compatibility. Adjustable DC output ranges: 3–12 V, 1–24 V, 9–24 V, 24–36 V with up to 2 A adjustable current. Power handling: Up to 72 W total power for compact loads. Monitoring: Built-in display shows voltage/current for real-time checks. Form factor: Compact black housing with a 200 cm cable for flexible placement. Specifications (light): 118 × 50 × 31 mm; output up to 2 A; efficiency ~95%. Fit: Suited to makers, technicians, and hobbyists needing a portable, monitorable DC supply for small devices and prototypes.

Read more less