Everything your vehicle needs in one place. Syndmart's Automotive collection covers car electronics, exterior and interior accessories, maintenance tools, and safety gear for drivers who want performance, style, and peace of mind on every journey.
Drive better, drive smarter. Fast worldwide shipping.
This 2-pack car clearance light set is designed for exterior vehicle mounting and straightforward installation. The compact units deliver visible signaling without complicated setup. Ideal for adding clearance lighting on trucks, vans, trailers, RVs, and service vehicles that require clear side signaling in day or night conditions. Easy installation with a simple design and minimal mounting effort Low heat generation supports longer LED life Low power consumption for energy efficiency Shock-resistant construction for durability in everyday driving Bright, clear illumination designed for exterior visibility Weather-ready for exterior mounting in varying conditions Light specifications: 2-pack, exterior-rated, designed to operate in low-temperature conditions. Fit: Suitable for exterior mounting on most cars, trucks, and trailers that require clearance lighting. Note: Check your vehicle's wiring and mounting hardware for a secure fit.
$16.20
The 2-Pack Car Audio 2-In-1 Wire Power Supply Terminals provide a secure, straightforward wiring solution for car audio systems. Designed for DIY installations, they help ensure stable connections in the vehicle environment. Ideal for aftermarket amplifiers and head-unit upgrades in cars, trucks, or SUVs where clean power delivery matters. Material: Aluminum alloy construction for strength and corrosion resistance. Wiring compatibility: Accepts 0 gauge cables up to two runs (2x0GA) for power and ground. Dual outputs: 2-In-1 design provides two connection points in one compact unit. Voltage range: 12–48V DC operation. Installation: Simple mounting and screw/clamp connections for quick setup. Durability: Built to withstand vehicle vibration, temperature changes, and humidity. Fit: Compatible with most 0GA power cables and 12-48V car audio systems.
$24.60
Two-pack back-seat car charger set for rear-seat passengers. Built from PC fireproof plastic with a subtle piano finish. Ideal for long trips or rideshares where rear occupants need to stay powered. The 1.7 m cord allows easy reach without crowding cables. Four output ports provide up to 8 A total at 5 V. Compatible with iOS, Android, Windows phones and tablets, plus speakers. 1.7-meter power cord enables rear passengers to charge comfortably. Detachable back clip secures the unit to the back of a seat. Safety protections include overvoltage, overcurrent, short-circuit and overheating safeguards. Dimensions: 79×16×50 mm or 65×28×19 mm; weight ~200 g. Material: PC fireproof plastic; Color: Black. Temperature rating up to 50°C. Fits 12–24 V vehicle outlets in cars, SUVs, and trucks.
$21.90
This 2-pack of 41mm Festoon LED car reading lamps is designed for interior use. The lamps feature a durable aluminum alloy housing and a compact festoon form for simple replacement. Ideal for upgrading dome lights, door lights, or reading lamps in compatible vehicles. The lights are canbus-compatible to minimize dashboard warning codes. 41mm festoon size fits common interior fixtures Aluminum alloy housing provides heat resistance High-brightness LED for clear, steady light Low power consumption Canbus-compatible to help prevent dashboard error codes Easy plug-and-play installation with standard festoon connectors Pack of 2 lamps Durable LEDs deliver stable brightness over time with minimal heat buildup. Fit: Suitable for 41mm festoon sockets used in many car models.
$16.38
2-Pack 12/24V LED Edge Tail Lights are compact, weather-resistant lights for trucks, trailers, and industrial vehicles. Each light uses a polycarbonate housing with 8 LEDs and measures about 12 × 4 × 2 cm. Designed for trucks, trailers, and construction equipment, these edge lights handle outdoor use. The waterproof and anti-fog design helps maintain visibility in rain, dust, and mud. DC 12–24V operation for compatibility with common truck, trailer, and equipment circuits. Each light contains 8 LEDs for bright, even illumination. Color options include red and yellow for signaling. Polycarbonate housing is waterproof and anti-fog. Includes mounting screws for quick installation. Three-wire harness: black to negative, yellow to positive, third yellow flashes for 2 seconds at power-up. Specifications: Size 12 × 4 × 2 cm per piece; weight ~70 g per pair; color temperature 2000–4000K. Fit: Compatible with 12/24V electrical systems on trucks, trailers, and engineering vehicles; check mounting hole spacing.
$18.94
The 2-In-1 Tablet Car Holder with Air Vent Mount provides flexible mounting for tablets in your vehicle. It supports a wide range of tablets, including iPad models, without blocking essential dashboard visibility. Ideal for navigation, streaming, and hands-free calls during commutes, rideshares, or family trips, it keeps your device within easy reach and view. Two installation methods: suction cup for windshield or dash, and an air vent attachment for flexible placement. Broad compatibility with many tablets, including iPads and other common sizes. Device-safe design that minimizes pressure on edges and ports to help prevent damage. Durable construction built for daily use and steady hold on bumpy roads. Adjustable viewing angle with a quick-release mechanism for fast device swaps. Specifications: Mounting options include suction cup and air vent clip. Compatible devices include iPad models and other tablets. Material: durable construction. Fit: Suitable for most car interiors and a range of tablet sizes supported by the mounting system.
$19.93
The 2-in-1 Magnetic Car Air Vent Holder is designed to securely mount your phone and hold a cup in your vehicle's air vent, helping to keep your dashboard organized during drives. In everyday use, this holder is helpful for commuters or travelers who need quick access to their phone for navigation while keeping a drink steady on bumpy roads, reducing distractions and improving focus. Simultaneously accommodates a phone and cup up to 70mm in diameter for versatile storage Features three sets of adjustable hooks to fit most car air vent styles, ensuring a stable fit Includes two magnetic suction sheets and one double-sided tape for easy, reliable phone attachment Constructed from durable ABS and silicone materials for everyday resilience Compact design at approximately 112x87x80mm and 175g, making it unobtrusive in your car This holder fits well for drivers seeking a practical solution to manage essentials without obstructing airflow or views.
This 2-in-1 In-Car Bluetooth Audio Receiver and Transmitter with Aux provides wireless audio flexibility for car, TV, and home audio setups. Pair a TV, phone, or computer with Bluetooth headphones, speakers, or car stereo and switch between receiving and transmitting without cables. 2-in-1 design: Bluetooth receiver and transmitter with a 3.5 mm AUX input/output Bluetooth 5.3 for stable, low-power connections with up to 10 m range Type-C charging, 250 mAh battery, approximately 2 hours charging time Wide compatibility: mobile phones, tablets, PCs, TVs, amplifiers, speakers; supports TF card Compact ABS body, sized 61 × 41 × 17 mm and easy to carry Hands-free calling when connected to a paired device Optional specifications: Material is ABS; size is 61x41x17 mm; charging interface Type-C; input power DC 5 V; supports 3.5 mm AUX audio Fit: The compact, lightweight unit fits in a car glove box or center console and pairs quickly with compatible devices.
$22.54
The 2-In-1 In-Car Air Purifier And Humidifier With Aromatherapy cleans cabin air and adds moisture in a compact 12V car unit. It combines purification with a subtle aromatherapy option. Ideal for daily commutes, rideshares, and road trips where clearer air and a hint of fragrance improve cabin comfort without adding bulk. Generates 5.6 million negative ions per cm3 to help reduce PM2.5, bacteria, formaldehyde, and other pollutants. Twin USB car charger port with integrated protection safely charges two devices simultaneously. Blue LED indicator ring provides soft light to locate the unit at night and enhance cabin ambiance. Frosted ABS bottom with brushed aluminum alloy body offers a refined, durable look. Low power consumption: DC 12V input, up to 0.8W, suitable for continuous use. Aromatherapy function supports diffuse oils to create a subtle cabin scent. Specifications — Size 35x35x105 mm; Weight 40 g; Negative ions 5.6 million/cm3; Ozone ≤ 0.05 ppm; Power: DC 12V; Power consumption ≤ 0.8W. Fit — Designed to fit standard 12V car outlets for convenient use on the road.
The 2-In-1 Car Sun Visor Mirror Anti-Glare provides daytime sun shading and nighttime glare reduction in a single, easy-to-install accessory. With a size of 32 x 14 cm and an adjustable angle between the mirror and its bracket, it lets you tailor visibility for daily commutes, road trips, and night driving. Size: 32 x 14 cm Includes 2 visors to shield daytime sun and reduce night glare Adjustable angle between mirror and bracket for personalized viewing Anti-glare coating and UV filtering to improve visibility Durable construction with easy installation and removal Protective sheets inside; remove before use Light specifications: Anti-glare coating and UV filtering help maintain visibility in varying light conditions. Fit: Designed to attach to car sun visors for straightforward installation and removal.
$17.78
This 2-In-1 Car Seat Back Storage Tissue Bag provides extra organization for your vehicle. Made from PU leather, it hangs on the seat back to keep essentials within reach. Ideal for holding tissues, snacks, a mobile phone, an umbrella, or small beverages during daily commutes, road trips, or family rides. It can also function as a temporary trash container when paired with a bag. Material: PU leather that’s easy to wipe clean. Installation: strap clip mounts to the seat-back, without obstructing headrest adjustment. Storage capacity: large internal space for tissues, cups, snacks, phone, and small items. Two sizes: standard 25x25x7 cm (217 g) and large 25x30x7 cm (250 g). Dual-use design: can hold a trash bag to serve as a temporary waste container. Durability: wider, thicker design for increased item types and stability. Specifications: Standard version 25x25x7 cm, 217 g; Large version 25x30x7 cm, 250 g. Fit: Straps clip onto the seat-back; compatible with most vehicles and does not block headrest movement.
$35.15 - $35.47
This 2-In-1 Car Bluetooth Receiver Transmitter for Hands-Free Calls adds flexible wireless audio to vehicles without built-in Bluetooth. It works as both a receiver and a transmitter, switching with a single button for simple, on-the-go control. Ideal for daily driving, it lets you take calls hands-free and stream music through the car stereo via the 3.5 mm AUX input. 2-in-1 receiver and transmitter with a one-button switch. Bluetooth 5.3 for stable, low-latency wireless audio up to 10 meters. 3.5mm AUX input and USB-C charging; compact 57×28×13 mm, 15 g. HD audio with noise-reduction for clearer calls. 200 mAh battery delivers about 15 hours in receive mode and 9 hours in transmit mode. ABS body, non-slip finish, lightweight and portable. Light specifications: Transmission rate 4 Mbps; Operating frequency 2.4 GHz; Range up to 10 m (line of sight). Fit and placement: Compact size fits in a glove box, console, or cup holder for easy access while driving.
$22.53
The 2-In-1 Car Bluetooth Audio Receiver and Transmitter is a compact adapter for wireless audio in vehicles. Built from ABS+PC, it houses a 200 mAh rechargeable battery and a 0.5 m USB-C charging cable, with a power display to monitor charge status. Switch between TX and RX modes to suit your setup. In TX mode, it streams car audio to Bluetooth headphones or speakers. In RX mode, it accepts Bluetooth from a phone or tablet to play through the car speakers. 2-in-1 TX/RX design with a simple mode switch. TX mode streams car audio to Bluetooth headphones or speakers. RX mode receives Bluetooth from a phone or tablet to car speakers. Built-in microphone supports hands-free calls. 200 mAh rechargeable battery with real-time power display. Type-C charging via included 0.5 m cable; lightweight 14 g. Compact ABS+PC housing; 12.3 x 2.5 x 1.7 cm. Specifications: Material ABS+PC; Battery 200 mAh; Weight 14 g; Size 12.3 x 2.5 x 1.7 cm; Cable: 0.5 m Type-C. Fit: Compact form factor and light weight support easy placement on the dash or in storage space.
$21.64
This 2-in-1 Bluetooth receiver and transmitter is designed for in-car use, offering simple one-button switching and a compact form factor for mobile audio setups. Use it to stream music from a phone to the car stereo via the 3.5mm Aux input, or to connect a Bluetooth headset or speaker as a wireless receiver. The built-in high-definition noise-reduction microphone supports clearer hands-free calls. 2-in-1 receiver and transmitter with one-button switch. Bluetooth 5.4 for stable, low-latency wireless audio. 3.5mm Aux universal interface supports most audio devices. Built-in HD noise-reduction microphone for clearer hands-free calls. 180 mAh battery; about 10 hours in receiving mode, 8 hours in transmitting mode. Compact ABS housing, 53 × 20 × 12 mm; lightweight with anti-bending audio plug. Specifications: ABS body; Bluetooth version 5.4; frequency 2.4–2.48 GHz; barrier-free range up to 10 m; charging time about 2 hours; playing time about 10 hours (receiving), 8 hours (transmitting). Fit: compact and pocket-friendly, it fits in a cup holder, glove box, or center console for easy access.
$20.50
The 2-In-1 Bluetooth Audio Transmitter and Receiver Adapter for Home Audio enables both sending and receiving audio over Bluetooth in a single device. Use it to stream music from your phone to home speakers, or route TV, CD player, or MP3 player audio into Bluetooth headphones or speakers. Dual-mode operation: acts as both transmitter and receiver so you can switch between sending and receiving audio as needed. Long-range Bluetooth: supports wireless transmission up to 10 meters for flexible positioning. Low-latency performance: suitable for TV watching, online gaming, and movie playback. Built-in rechargeable battery: provides cordless operation and reduces cable clutter. Wide compatibility: works with Bluetooth-enabled smartphones, tablets, TVs, CD players, MP3 players, and Bluetooth speakers or headphones. Specifications: Built-in rechargeable battery; Bluetooth connectivity with range over 10 meters. Fit: Compatible with Bluetooth-enabled speakers and headphones; suitable for TVs, CD players, MP3 players, and smartphones in a home audio setup.
$21.05
This 2-button replacement key shell is designed for Toyota Prius and similar models, offering a straightforward way to refresh your car's key without replacing the entire unit. For drivers dealing with worn-out or damaged key casings, this shell provides an affordable option. Simply transfer the internal electronics from your old key to this new shell and get back on the road quickly, ideal for everyday use or as a spare. Includes two shells for convenience, allowing you to keep one as a backup Made from durable plastic and copper materials to withstand regular handling Compatible with Toyota models from 2004-2009, including Prius, Corolla Verso, and Camry Lightweight at 33g per shell, making it easy to carry on your keyring Features a simple installation process, typically requiring basic tools Ensures a secure fit with its precise button design for reliable operation This key shell fits standard Toyota key systems, helping maintain functionality for your vehicle's security needs.
$21.64
This 2-pack front windshield washer nozzle set is designed to replace worn or clogged spray jets on select Citroën and Peugeot models, restoring consistent spray coverage. Ideal for routine maintenance or winter readiness, it installs directly in place of the old nozzle to maintain clear visibility. 2-piece front washer nozzle set Material: plastic Direct replacement for worn or blocked nozzles OE reference: 6438Z7 (for cross-check) Compatible with Peugeot Partner MK2, Peugeot Partner Tepee MK2, and Citroën Berlingo MK2 (2008–2018) Easy installation; no special tools required Specifications: Material: plastic; Pack: 2 pieces; OE reference: 6438Z7; Compatibility: Citroën Berlingo MK2, Peugeot Partner MK2, Peugeot Partner Tepee MK2 (2008–2018). Fit: Matches the listed models; please verify OE 6438Z7 before purchase.
$16.16
These wide-angle rear view mirrors come in a 2-pack, designed to help drivers see more of the road by reducing blind spots during everyday driving. For those who drive in busy traffic or navigate narrow streets, these mirrors offer a practical solution by expanding your field of view, allowing you to spot vehicles or pedestrians more easily and make safer lane changes or turns. Simple installation using included double-side tape, sticking securely to your existing mirrors without tools. Adjustable angle for personalized viewing, ensuring optimal visibility based on your driving position. Wide-angle design that effectively broadens your rear view, helping to eliminate common blind spots. Durable construction suitable for daily use, with a compact size that blends seamlessly with most car mirrors. Versatile compatibility with a variety of vehicles, from sedans to SUVs, for enhanced safety on the go. This 2-pack fits standard car rear view mirrors, providing an easy way to upgrade your vehicle's visibility for more confident driving in various conditions.
$17.51
This 2-pack Telescopic Car Lip Bars are designed for front and rear use, offering adjustable length and a durable steel construction to fit a range of vehicles. The bars are built to withstand normal vehicle movement without sagging or slipping. Use case: Ideal for lip alignment during installation, securing lightweight accessories, or serving as a stable mounting point on sedans, SUVs, and trucks during temporary setups. Material and finish: steel with a wear-resistant coating for lasting durability Telescopic length: adjustable to accommodate different lip widths and gaps Front and rear compatibility: suitable for use on both ends of most vehicle models Vibration and movement resistance: maintains position under common road conditions Easy installation: quick, tool-free setup with reliable clamping Light specifications: two bars per pack; adjustable length to suit various lip dimensions; no power or electronics involved Fit: compatible with a wide range of cars that have front and rear lip bars. Check your lip width to confirm the adjustable range covers your model.
2 Pack T10 Car Clearance Lights provide a practical lighting upgrade for everyday vehicles. These compact lights are designed for reliable clearance and side-marker use on body panels and undercarriage areas. Use them on trailers, trucks, vans, or utility vehicles that need clear visibility along the sides or rear. They install quickly in standard T10 sockets, offering a straightforward upgrade without complex wiring. 2-pack set for two locations or spares T10 wedge-base compatibility with common housings Low power consumption and long service life Shock-resistant housing withstands road vibration Brighter illumination with stable low-temperature operation Simple plug-and-play installation in minutes Light specifications: 2-pack, standard T10 base, suitable for automotive lighting installations. Color and exact voltage depend on the vehicle’s electrical system. Fit: Compatible with vehicles that use standard T10 clearance light sockets. Check your existing fittings before purchasing.
This 2-pack of T10 5W SMD 2835 9LED car clearance lights provides practical, reliable illumination for 12V vehicles. Designed for ground vehicles, these lights boost visibility and signaling on trailers, trucks, vans, and motorhomes when fitted in standard clearance light housings. 9 LEDs (SMD 2835) per light for even brightness T10 base fits standard clearance light sockets 5W power per light at 12V DC Low heat generation with long service life Shock-resistant construction for rough-road use Specifications: 12V DC, 5W per light, 9 LEDs, SMD 2835, T10 base, 2-pack. Fit: Suitable for vehicles with 12V systems and T10 sockets, including trucks, vans, trailers, and RVs.
This 2-pack T10 3W car clearance light is designed for ground vehicles. It features a simple design and easy installation. The 2-pack provides redundancy for critical lighting on work vehicles. They are suitable for mounting on truck beds, trailers, ATVs, or service vehicles to improve visibility at night or in low-light conditions. They are suitable for mounting in forward-facing or side clearance positions. T10 base, 3W LED per light for bright but controlled illumination Simple, tool-free installation for quick upgrades Reduced heat generation and long service life Low power consumption for energy efficiency Shock-resistant housing withstands rough road conditions T10 base size compact modules compatible with standard mounting points Light specifications: Two 3W LEDs per pair; designed for automotive-grade durability. Fit: compatible with standard T10 sockets and mounting points on many trucks and trailers.
This 2-pack stainless steel exhaust tail muffler tips are designed for select VW and Audi models, providing a clean, finished rear appearance and a corrosion-resistant, rust-free surface. The stainless steel construction is built to endure road conditions and heat exposure while maintaining a subtle, metallic look. Ideal for DIY replacement or aesthetic upgrade, these tips slip over the tailpipes and lock in place with a simple push, avoiding screws or drilling. Stainless steel construction resists corrosion and rust for long-lasting use. Includes two tips for a balanced, paired appearance on dual-exhaust setups. Push-in, lock-on installation; no tools, screws, or drilling required. Durable exterior withstands road debris and heat exposure without fading. Compatibility: VW 1.8T/2T Swept Volume engines and Audi A1, A3, A4L, Q3, Q5. Designed to fit standard tailpipe openings on the listed models (verify diameter). Fit: Works with the specified VW and Audi models; confirm your tailpipe size before purchase.
This 2-pack features spider-shaped tire valve caps to replace missing caps and add a subtle decorative touch to your wheels. Designed for cars, motorcycles, and bicycles, these caps fit standard valve stems and help seal against dust and moisture. Spider-shaped design adds a distinctive, playful look to wheels 2-pack set lets you outfit multiple vehicles or replace pairs Universal fit for standard valve stems on cars, motorcycles, and bikes Durable construction withstands regular road use Low-profile, unobtrusive appearance with simple screw-on installation Finish designed to resist wear from typical road use Light specifications: Includes two caps; material and color details are not provided. Fit: Designed for standard Schrader valve stems used on most cars, motorcycles, and bicycles; not compatible with Presta valves.
$17.31
