The Makita Dual Charger is designed for 14.4–18V Li‑Ion batteries used in cordless tools. It supports global voltage input and provides safe, efficient charging with an intelligent protection circuit. Use it at the workshop or on site where outlets vary. It charges 14.4–18V packs reliably, while prioritizing battery safety and minimizing heat during charging, even when multiple packs are swapped. Compatible with 14.4V–18V Li‑Ion batteries. Input 110–240V AC, 50/60 Hz; output 14.4–18V, up to 6A (65W). Built‑in smart protection chip with overcharge protection and reduced heat generation. Charge status indicator shows red during charging and green when full. Includes multi-region plugs for global use; supports different outlets. 1.2 m power cord length for flexible setup. Fits 14.4V–18V Li‑Ion battery packs.

Read more less

The Foam Board Cutting Pen is a compact, 15 cm handheld tool designed for everyday craft projects. It enables precise cuts with a clean edge and minimal debris. Use at home, in classrooms, or on the go for trimming foam board, pearl cotton, benzene board, extruded plastic KT board, and non-woven fabrics. It’s well suited for bag prep and tarpaulin edging. Non-slip, comfortable handle for steady control. Cuts foam board, pearl cotton, KT board, extruded plastic, and non-woven fabrics; not for sponge or rubber. Smooth, fast cuts with clean edges and minimal debris. Wire-controlled switch for safe, immediate operation. 15 cm length; US: AC 90 mm / DC 90 mm; EU/UK: AC 50 mm / DC 90 mm. Fast preheating; rest after 30 minutes of use; max 3 hours per day. Specifications — 15 cm tool length. Plug variants offered for US, EU, and UK with corresponding wire lengths. Preheating is fast for efficient workflow. Fit: Designed for hobbyists, students, and makers needing reliable, simple cuts for light materials; compact enough for a small toolkit or classroom kit.

Read more less

Fonson Woodworking Roller Table Saw Guide Stopper Dual Scale is a metal positioning accessory for woodworking table saws, delivering precise alignment for each cut. Use it to set cutting start positions, guide boards during crosscuts or rips, and maintain safe, repeatable results in compact shops. Material: metal Applicable scenario: woodworking table saw Surface: laser-printed metric/imperial dual scale 2-point contact with top and bottom guide bearings for stable verticality Simple operation and durable construction GD704B compatibility: matches 19-type slides and 9.5 mm width (3/8 in) GD704C compatibility: matches 30-type slides and 19.5 mm width (3/4 in) Specifications (light): Material: metal; Surface: laser-printed metric/imperial dual scale. Fit: GD704B fits 19-type slides with 9.5 mm width (3/8 in); GD704C fits 30-type slides with 19.5 mm width (3/4 in).

Read more less

Fonson 35mm Woodworking Hinge Hole Opener Locator for Doors helps woodworkers accurately locate hinge holes on doors during DIY projects. Built from ABS engineering plastic, it offers a light, durable tool for repeated use. Ideal for installing door hinges on interior doors, cabinets, and decorative panels. It supports quick setup without fixture changes to open small holes, improving consistency across multiple units. Material: ABS engineering plastic for durability and light weight Application: woodworking and DIY decoration No fixture changes required: open small holes without changing the setup Precision features: precise limit ring and 26+35mm right-angle adjustable fixing clamp Size and compatibility: 96x228 mm; fits standard 35mm hinge hole spacing Light specifications: Manual operation; no power needed. Fit: Compatible with standard 35mm hinge templates used on most interior doors.

Read more less

Hex Shank Carbide Drill Bits Set for Drilling Glass and Tile delivers precise holes with durable carbide tips and a secure hex shank. Designed for use with electric drills, impact drivers, and drill presses, these bits cut cleanly from 3 mm to 12 mm, with a four-edged geometry for control and speed. Use these bits for tasks like mounting fixtures into ceramic tile, glass panels, and marble countertops, or for drilling into stone, concrete, wood, plastic, and PVC. Water cooling is recommended for sensitive materials to minimize heat and extend bit life. Carbide construction for hardness and long life Hex shank minimizes slipping in chucks Four-edged tip enables faster, neater holes Size range 3, 4, 5, 6, 8, 10, 12 mm Wet/dry drilling guidance wet for tile/glass/marble; dry for concrete, brick, wood, plastic Drill compatibility fits most standard drills with hex shanks Specifications Sizes: 3–12 mm; Weights (approx.): 3 mm 12 g; 4 mm 13 g; 5 mm 16 g; 6 mm 18 g; 8 mm 24 g; 10 mm 32 g; 12 mm 39 g. Fit Hex shank fits most drill chucks that accept hex bits. Check your tool’s compatibility and clamp securely before drilling.

Read more less

Hexagonal shank PPR step drill bits designed for leak repair, offering 20, 25, and 32 mm options for versatile pipe work. They are suitable for repair tasks in residential and commercial piping environments. When replacement fittings aren’t available, use this tool to widen or shape the pipe mouth to enable a secure leak repair in PPR systems. Sizes: 20, 25, and 32 mm provide layering options for different repairs Hexagonal shank design enables compatibility with most drill chucks and power tools Material: bearing steel with titanium plating for rust resistance and durability Smooth cutting edge reduces deformation and supports quick, predictable cutting Length about 61 mm keeps the bit compact for tight spaces Specifically intended for PPR pipe work and leak repair scenarios Fit: Hex shank fits standard drill chucks and compatible tooling.

Read more less

100mm Woodworking Sanding Plate for angle grinders offers durable high-carbon steel construction and flexible edge options for woodworking tasks. It accepts beveled, curved, or flat surfaces to match different workpieces. Ideal for finishing tea trays, root carving, shaping wooden surfaces, and smoothing non-metal materials. Diameter 100mm with an inner bore of 22mm; compatible with standard 22mm arbors. Made from high-carbon steel with surface high-frequency quenching for hardness and durability. Edge options include beveled, curved, and flat surfaces to suit your task. Weight varies by edge: beveled 126g; arc 143g; flat 175g. Barb knife teeth design enables effective material removal and longer service life. Notes: Ships as grinding disk only; angle grinder and other items not included. Designed for standard 22mm angle grinder arbors and suitable for hobbyists and woodworkers seeking efficient edge finishing.

Read more less

The Mini Electric Engraving Pen is a compact, red engraving tool for precise DIY carving. Its lightweight ABS body and comfortable grip support steady control during delicate work. Three speed settings adapt to different materials. A 0.5–3.2 mm chuck accepts common bits. With 10 W of power and a compact 150 × 30 mm profile, it fits well in tight spaces. Three speed settings: 5000/10000/15000 rpm Chuck: 0.5–3.2 mm 25-piece accessory kit: wheels, bits, needles, sanding discs, storage box Versatile for cutting, engraving, grinding, polishing, drilling Lightweight ABS body; comfortable grip; compact size; 90 cm cord EU plug; 10 W; no-load speed 15000–5000 rpm Specifications: Material is ABS; Color red; Product size 150 × 30 mm; Cord length 90 cm; Rated input power 10 W; No-load speed 15000–5000 rpm; Chuck diameter 0.5–3.2 mm. Ideal for hobbyists, makers, and students needing a portable, precise engraving option for small projects.

Read more less

Compact and portable, this Handheld Chain Saw Sharpener uses a three-head grinding system to maintain chain teeth on the job. It features an aluminum alloy body with emery grinding heads for durable sharpening. Designed for electric, gasoline, and woodworking saws, the hand-cranked design requires no power source. Its small size supports on-site maintenance for users like landscapers and woodworkers. Three-head grinding for efficient tooth shaping Aluminum alloy body with emery grinding heads for durability Lightweight 183 g; compact 8.6 x 3.9 x 1.7 cm Hand-cranked operation saves time and effort Suitable for chains on electric, gasoline, and woodworking saws High-speed, fine grinding for sharp, wear-resistant teeth Specifications: Material — aluminum alloy with emery grinding heads; weight 183 g; size 8.6 x 3.9 x 1.7 cm. Note: Minor paint wear or scratches may be present and do not affect function. Fit: Works with most standard saw chains on electric, gasoline, and woodworking saws.

Read more less

Angle Grinder Water Spray Nozzle For Marble Cutting Dual Spray is a practical water-cooling accessory for stone and tile work. It offers two spray modes and two spout configurations, plus teflon tape for sealing. Use this nozzle when cutting marble, tile, or other stone with a grinding tool to cool the cut, reduce dust, and protect your workpiece. Two spray modes: fog spray and rotary spray, switchable for different tasks. Two spout options: bamboo-tube snap (plastic + copper) and aluminum-tube snap (aluminum + copper); includes teflon tape. Adjustable spray size for controlled cooling and dust suppression. Lightweight components suitable for handheld use. Durable materials—plastic, copper, aluminum, and teflon tape for sealing. Easy installation on compatible tools with straightforward mounting. Fit: Designed to fit most market cutting machines, including angle grinders, marble machines, and grooving machines.

Read more less

The Manual Wire Trough Nail Tool is a hand-operated fastener designed for securing wire troughs to cement walls and wooden surfaces. It features an alloy steel head, an aluminum body, and a tungsten steel firing pin for durable, predictable use in electrical and plumbing projects. Use it for fixing wire troughs in water and electrical installations or nailing wooden boards for decoration on brick, cement, gypsum, or plastic-aluminum boards. Capacity: ~65 nails in the magazine (nails not included). Materials: alloy steel head, aluminum body, tungsten firing pin. Surfaces: brick, cement, wood, gypsum, and plastic-aluminum boards. Operation: manual nail tool with a one-button press; firing pin auto resets. Durability: reinforced rib design and long-lasting firing pin. Weight: about 454 g; keeps balance during use. Specifications: Weight ~454 g; Magazine capacity ~65 nails; Nails not included. Fit: Suitable for DIY and professional installations securing wire troughs to masonry or wood surfaces; balanced weight supports steady placement.

Read more less

WESSLECO Wear-Resistant Waterproof Parts Storage Tool Pack is a compact, durable organizer designed for technicians, DIYers, and hobbyists. Constructed from wear-resistant Oxford cloth, it protects small parts from moisture and abrasion on the go. Use it to store fasteners, screws, nuts, bolts, and small tools during repairs, maintenance, or builds. A side tool kit pocket helps you locate items quickly within partitions. Wear-resistant, waterproof Oxford cloth construction Reinforced seams for lasting durability Multiple compartments with insertion pockets for organized storage Plug-button fixed storage prevents items from falling out Side tool kit pocket for fast item access Handle design for easy transport Specifications — Expanded size 72x36 cm; Roll-up size 36x12 cm; Weight 574 g; Material: Oxford cloth. Fit: Roll it up for compact storage when not in use; unroll to lay flat for easy access to contents.

Read more less

The M6 Colored Zinc Round Head Hex Socket Screws Set provides durable connectors for furniture assembly. Designed for bed frames, chairs, and bunk beds, it supports DIY projects and replacements. Use this kit to replace worn hardware in flat-pack furniture or to build custom frames that use M6 bolts. The zinc-coated finish resists rust in typical indoor environments. 25 bolts per length: M6 x 40, 50, 60, 70, 80 mm (five lengths total). 25 M6 x 10 mm barrel nuts to pair with the bolts. Material is high-quality carbon steel with colored zinc plating for corrosion resistance. Head: round 10 mm diameter, 1/8 in thick; drive type is hex socket. Thread: M6 with 6 mm nominal diameter and 1.0 mm pitch. Includes a hex wrench for assembly. Fit: Compatible with standard M6 nuts and hardware found in common furniture connectors and frames.

Read more less

This Self-Drilling Screw Kit delivers reliable M2 round-head fasteners in 304 stainless steel for everyday fastening tasks. The rust-resistant screws are designed for durability in light to moderate applications. Ideal for confined spaces beneath surfaces. The self-drilling point and sharp threads cut into soft metal, plastics, or wood, enabling quick, secure joints without pre-drilling. Material: 304 stainless steel for corrosion resistance Head type: round head suitable for flush or countersunk applications Sizes: eight lengths – M2x4, M2x5, M2x6, M2x8, M2x10, M2x12, M2x16, M2x20 Quantity: 100 screws per size, totaling 800 pieces Packaging: resealable transparent box for easy storage Industries/use: widely used in electronics, machinery, construction, energy, and general equipment assembly Application: joint reinforcement in light assemblies Specifications (light): Size range: M2x4–M2x20; material: 304 stainless steel; head: round; count: 800 pieces; packaging: resealable transparent box. Fit: Suitable for small-scale projects and repair tasks that require M2 fasteners.

Read more less

The Pulley Keys Set provides 140 pieces in sizes from 3x3x8mm to 6x6x30mm, kept in a compact plastic case for easy transport. Designed for shaft and pulley applications that require frequent disassembly, it supports secure alignment on drive shafts in machinery and automotive work. 140 pieces organized by size for quick access Sizes range from 3x3x8mm to 6x6x30mm Made of A3 carbon steel for wear resistance Precisely machined with smooth surfaces for snug fit Compact plastic case keeps keys organized and portable Case contents arranged to simplify size identification and retrieval Suitable for drive shafts, pulleys, and other frequent-disassembly assemblies Specifications: Material — A3 carbon steel; Case — plastic; Total pieces — 140; Color — metallic; Size range — 3x3x8mm to 6x6x30mm. Fit and compatibility: Works with standard pulley keys and drive shaft connections in mechanical, automotive, and industrial equipment within the listed size range.

Read more less

This Brake Hose Sealing Clamp is a compact, ABS-based accessory designed for automotive fluid seals. It offers practical performance in hose sealing tasks for repair work and routine maintenance. Use it in automotive repairs, maintenance, and hardware projects where hoses must be sealed to prevent leaks. It holds hoses securely to minimize fluid loss and air ingress during service. Excellent compatibility across a wide range of hoses and fixtures. Smooth, polished edge protects hoses from abrasion. Secures hoses tightly to prevent fluid and air leaks. Made of ABS for durable, long-lasting performance, with explosion-proof design. Easy to install, replacing old clamps without tools or complex steps. Portable and ready for direct use in repairs and maintenance. Light specifications: Material: ABS; designed for stable performance and long service life. Fit: Direct replacement for old or inflexible hose clamps; suitable for automotive hose sealing where space and flexibility matter.

Read more less

Mayitr 3-16mm Hand Deburring Tool is a compact, precise tool designed to smooth copper tube ends after cutting. Use it to prep tube ends before joining with fittings, solder, or crimp connections. It suits small-diameter plumbing, HVAC, and DIY tube work. Compatible with copper tubes from 3 to 16 mm outer diameter. Blade made of HSS steel for a durable, sharp deburring edge. Blade can be swiveled to follow the tube edge for precise control. Plastic shell handle provides a light, comfortable grip during use. Overall length approximately 147 mm for stable handling. Includes one copper tube deburring reamer. Specifications: Model 624728; color blue; includes 1 x deburring reamer; construction combines plastic shell with HSS blade. Fit: Designed for copper tube ends in the 3–16 mm range, suitable for both DIY projects and professional tasks.

Read more less

This 16mm PVC electrical insulating tape is designed for wiring and appliance insulation. It offers reliable dielectric performance with flame retardancy and weather resistance for everyday electrical tasks. Ideal for insulating wire connections, protecting electrical insulation on appliances, and automotive wiring harnesses. Width 16 mm; length 10 m per roll. PVC insulation tape with flame retardant formulation. High dielectric strength with reliable adhesion on clean surfaces. Suitable for wire connections, appliances, and automotive wiring. Weather and temperature resistance for indoor and outdoor use. Care and storage: Keep adhesive surface clean and dry; store in a cool place away from heat and moisture. Specifications: Width 16 mm; Length 10 m; Material: PVC; Color: varies by SKU. Fit: This tape suits common insulation tasks for wires and appliances in homes, workshops, and vehicles.

Read more less

This portable brake pad thickness ruler helps you quickly check wear levels between service visits. Made from wear-resistant plastic, it resists deformation and avoids paint transfer during handling. Ideal for DIY enthusiasts and professional technicians performing routine brake inspections. Use it to gauge remaining pad material and compare against typical wear thresholds to determine when service might be needed. Material: Plastic with wear-resistant construction Precision: Measures pad thickness with consistent, reliable readings Portability: 40 g weight, compact pocket size for field use Size & packaging: Package size 15 x 3 x 3 cm for easy storage Compatibility: Suitable for common automotive brake systems and caliper areas Specifications: Weight 40 g; Material: Plastic; Package size: 15 x 3 x 3 cm. Fit: Designed to fit in pockets, tool kits, or glove compartments for on-the-go checks.

Read more less

Reinforced flat-circlip pliers with a flat-mouth jaw designed for external snap rings (circlips) without holes. The tool is lightweight and portable for on-the-go auto repair tasks. Use this tool to remove or install circlips on brake components, transmission shafts, clutch hardware, and other machine-tool assemblies. The built-in spring-assisted mechanism helps steady pressure and reduces hand fatigue. Flat-mouth jaw (15.6 mm) for external circlips without holes Aluminum alloy body with anti-rust dark finish Built-in spring-assisted disassembly for smoother operation Rubberized, non-slip handles for secure grip Size 225 x 105 mm; weight 240 g Suitable for brake, transmission, pedal shaft and clutch shaft circlips Specifications: Material: aluminum alloy; Color: black; Size: 225 x 105 mm; Jaw width: 15.6 mm; Weight: 240 g. Fit: Compatible with external snap rings used in common automotive assemblies and basic machine-tool maintenance.

Read more less

The Universal Hex Wrench Extender Adapter adds practical leverage to your 1/2-inch drive or 21mm hex drivers. Built for durability, it connects securely to your existing wrench to extend reach and torque. Use it in tight spaces or when additional torque is needed to loosen stubborn fasteners in automotive, appliance, or bike maintenance tasks. Attach to a wrench or power bar to extend leverage for nuts and bolts. Compatible with 1/2" drives and 21mm hex drivers Heat-treated, drop-forged body for lasting durability Precision forging provides high hardness and wear resistance Extends your existing wrench to increase leverage Simple, tool-free attachment to compatible wrenches or power bars Compact and lightweight for easy transport and storage Specifications: Material is heat-treated steel via drop-forged process; Finish provides rust resistance; Compatible with 1/2" drive and 21mm hex drivers. Fit: Suitable for use with 1/2" drives or 21mm hex drivers and pairs with another wrench or power bar for extended reach.

Read more less

This USB computer microphone provides omnidirectional pickup intended for calls and basic recording. It connects via a standard USB connector and operates without additional drivers. Use it for video calls, voice notes, remote meetings, podcast rough takes, or classroom sessions where simple setup and uniform room pickup are needed. 360° omnidirectional polar pattern captures sound from all directions for consistent room coverage USB interface for plug-and-play connection with compatible Windows and macOS systems Sensitivity rated at -67 dBV/µbar (-47 dBV/pascal) for consistent input level reference Frequency response 100–16,000 Hz suitable for spoken voice and general-purpose recording No external power or drivers required; connects directly to a computer USB port Light specifications: Sensitivity -67dBV/µbar (-47dBV/Pa); Frequency response 100–16kHz; USB connector; 360° omnidirectional. Fit statement: Designed for users who need a straightforward, USB-connected mic for conversational audio and simple recordings.

Read more less

Compact kids mini digital camera with a 0.96-inch TFT LCD designed for everyday play and simple recording. The 60° wide-angle lens captures stills and video in standard HD formats. Use it for school projects, backyard play, or hands-free outdoor activity. Small size and keychain attachment make it easy to carry for students and sports enthusiasts who need a lightweight, discreet recorder. 0.96-inch TFT LCD display for framing and playback Lens: 60° high-definition wide-angle for wider field of view Video resolutions: 1920×1080 and 1280×720; omnidirectional built-in capacitor microphone Battery 3.7V/300mAh — approximately 90 minutes video or 1.6 hours continuous audio Storage: MicroSD/TF card slot supported (card not included) Connection: High-speed USB Type-C; input DC5V/1A Auxiliary light: supports infrared and incandescent light with manual switching Supported languages include English, Chinese (simplified/traditional), German, Japanese, and others. Fit: Compact, keychain-ready design suited for children and active users seeking a portable recorder.

Read more less

Compact instant camera with soft luminous bunny ears and built‑in printer, designed for child-friendly handling and simple wireless printing. The camera prints without ink and accepts a memory card for digital backup. Use at home, school projects, or events to capture photos and short videos, then print them directly or transfer images to a phone for wireless printing. Included themed sticker sheets and three rolls of printing paper add creative options. Cute soft rubber luminous bunny ears for visibility and tactile grip Wireless phone connection for image transfer and inkless printing 24 million pixels (2400W) for detailed still images; HD video recording Built-in 800 mAh rechargeable battery — up to ~2000 photos or ~6 hours video per full charge 2.4" IPS screen with autofocus for framing and playback MicroSD slot for photo storage; three rolls of printing paper included Light specifications: charging time ~3.5 hours; package includes camera, charging cable, manual, 3 rolls printing paper, and lanyard. Fit: compact, lightweight design intended to fit comfortably in children's hands for handheld use.

Read more less