This Lightning 2-in-1 adapter lets iOS devices use 3.5mm wired headphones while charging at up to 2A, combining audio passthrough and power in a single pocketable dongle. Built-in decoder circuitry maintains audio compatibility across iOS updates; low impedance and high sensitivity components reproduce audio data with stable transmission. Specifications Connector: Lightning input (device side) with 3.5mm headphone output Charging current: 2A Compatibility: supports all iOS systems Audio: built-in decoder chip; low impedance, high sensitivity Functionality: simultaneous audio playback and charging; no call function Usage & Care Connect headset and charging cable to the adapter first, then plug adapter into the phone. Use original or high-quality Lightning cable and 3.5mm headphones for best sound and charging efficiency. Store in a dry place; avoid bending connectors under load. Provides simultaneous 3.5mm audio output and charging for Lightning-equipped iOS devices.

Read more less

This 3.5mm stereo audio splitter cable converts one 3.5mm headphone output into two 3.5mm female jacks, allowing two sets of headphones or auxiliary cables to share the same audio source. The cable is a short, portable solution for sharing audio on phones, tablets and other devices with a 3.5mm headphone jack. It is compatible with iPhone 5, iPhone 4 & 4S, 3GS, 3G, iPad 4, iPad mini, New iPad, iPad 2, iTouch and other audio devices that use a standard 3.5mm connector. Cable length is 20 cm for close-range connection and easy storage while traveling. Specifications Connector: 3.5mm male to two 3.5mm female jacks (stereo) Cable length: 20 cm Use: Shares one stereo output with two headphones or aux inputs Compatibility: Devices with a 3.5mm headphone jack (listed above) Size Guide Overall cable length from plug to split: 20 cm (approximately 7.9 inches) Designed to let two listeners or two aux-equipped devices use a single 3.5mm audio output.

Read more less

The TX3 USB Bluetooth 5.0 audio transmitter connects a TV or PC to Bluetooth headsets and speakers using USB power and an auxiliary audio connection. Three operating modes: plug the TX3 into a computer USB port to use the PC sound card (blue LED flashes while searching); plug the USB into a 5V power supply or charger and connect the audio cable to a TV audio port (red LED flashes while pairing, blue LED steady when connected); or use the AUX wired input with an external charger supplying power. Specifications Bluetooth version: 5.0 Product size: 47 × 23 × 11 mm LED indicators: pairing and connected status Power: USB 5V input Compatibility: TV, laptop/PC, Bluetooth headset, Bluetooth speaker Package Contents Launcher ×1 Blister package ×1 Size Guide Compact dimensions (47×23×11 mm) for inline placement near TV or PC USB ports The TX3 is intended to enable wireless audio from a PC or TV to Bluetooth headsets and speakers.

Read more less

This Bluetooth 5.0 USB/AUX receiver converts a wired audio input into a wireless Bluetooth source, providing dual output via USB and a 3.5mm AUX jack for car stereos, amplifiers, and small speakers. The receiver is plug-and-play when powered through the USB port, enabling Bluetooth playback without rewiring existing audio equipment. Note: some CD players do not transmit audio over USB; in those cases connect the receiver to the player’s AUX input. When using AUX-only devices, the receiver requires a USB power source such as a charger or powered USB port. Specifications Bluetooth version: Bluetooth 5.0 Outputs/interfaces: USB power connection and 3.5mm AUX audio Power: requires USB power for operation (USB cable not listed separately) Included items: receiver, 3.5mm audio cable, blister packaging Compatible with: car audio, subwoofers, multimedia speakers, power amplifiers, pull bar speakers, computers, small speakers This adapter is intended to add Bluetooth audio playback to devices with USB power and/or a 3.5mm AUX input.

Read more less

The 5-In-1 Mobile Phone Screen Cleaning Kit is a compact, multi-device cleaning set that combines a washable fiber-flannel shell, a flocking sponge stick, and a small liquid container for on-the-go screen care. Its mini size fits in a pocket or bag for travel and daily use, and the components are designed to remove smudges and light residue from phone, tablet, and other touch screens. Care and maintenance: Fiber-flannel shell: washable, resists fading and lint loss after repeated washing. Flocking sponge stick: cleans without leaving residue. Specifications: Included items: Cleaning Pen x 1, Cleaning Cloth x 1, 5ML liquid container x 1 Materials: fiber flannel shell; flocking sponge stick Compatibility: designed for multiple mobile devices and touch screens This kit is intended to provide portable, reusable cleaning for mobile screens.

Read more less

Soft, molded ear hooks designed for AirPods that help keep earbuds secure during exercise and everyday wear. The ergonomic, sports-oriented shape fits the ear canal to reduce slippage and minimize loss during movement. The material is described as high-quality and soft, intended to resist sweat contact and help protect earbud housing over time. Specifications Compatibility: AirPods Material: soft, high-quality elastomer Included items: 2 pairs of ear hooks/ear caps Design: sports-fit ear canal shape with precise openings for connector access Use these ear hooks to improve fit and stability for workouts, commuting, or extended wear while helping limit sweat exposure to the earbuds.

Read more less

This 3.5mm audio splitter converts a single stereo output into two stereo ports, allowing two headphones or speakers to share one 3.5mm jack. The cable has a 3.5mm male connector on one end and two 3.5mm female jacks on the other, with a 16cm lead that keeps connections compact for travel and desktop use. The splitter is compatible with devices that use a standard 3.5mm headphone jack. Compatibility Suitable for iPhone 5, iPhone 4 & 4S, 3GS, 3G Compatible with iPad 4, iPad mini, New iPad, iPad 2, iTouch Works with other audio devices that have a 3.5mm headphone jack Specifications Connector A: 3.5mm male stereo Connector B: two 3.5mm female stereo jacks Cable length: 16cm Size Guide Cable length from male plug to split point: 16cm Use this splitter to share audio from one 3.5mm output between two sets of headphones or two speakers.

Read more less

Slow rebound foam ear tips for AirPods Pro (Size M) provide soft, skin-like contact with a slow-recovery foam that maintains shape after use. The foam surface is described as smooth and free of pinholes, and the material is very soft and delicate for comfortable in-ear wear. Specifications Compatibility: AirPods Pro Size: M (medium) Material properties: soft, delicate slow rebound foam Surface finish: smooth, “baby skin” texture; no pinholes Color options: Black, Gray Durability: stated lifespan 2–3× compared with typical memory foam ear tips Size Guide Selected size: Medium (M) — intended for users who use the standard AirPods Pro medium tips These ear tips are intended to replace the medium silicone tips on AirPods Pro for improved comfort and slower foam rebound.

Read more less

The 8 Pin Male To Dual 8 Pin Female And 3.5mm Audio Adapter provides simultaneous charging and wired audio for compatible iPhone or iPad models. Its single 8 Pin male plug connects to the device while offering one 8 Pin female port for power and a 3.5mm jack for headphones, so you can listen with wired earbuds while charging the device in the car, at home, or on the move. Specifications Connector: 8 Pin male input Outputs: dual 8 Pin female port and 3.5mm audio jack Functions: simultaneous charging and audio pass-through Compatibility: designed for use with iPhone or iPad models that accept an 8 Pin connector This adapter lets you charge your device and use wired headphones at the same time.

Read more less

The C28 Bluetooth 5.0 2-in-1 Audio Receiver Transmitter lets you add wireless audio to wired devices or stream sound from a phone to non-Bluetooth speakers with up to 10 m range in open spaces. Use the C28 in transmitting mode with computers, TVs, and projectors, or in receiving mode with speakers and earphones. It connects via 3.5 mm input and output and charges over Micro USB. Specifications Bluetooth version: V5.0 Battery capacity: 140 mAh Operating life per charge: about 4 hours Bluetooth range: 10 m (open place) Charging: Micro USB 5V/0.5A Connections: 3.5 mm input and output Package Contents & Compatibility Includes: host x1, charging cable x1, 3.5 mm audio cable x1, manual x1 Compatible with Android and iOS phones and tablets and Bluetooth audio equipment The C28 is intended to convert wired audio devices to Bluetooth or relay Bluetooth audio to non‑Bluetooth equipment.

Read more less

This 12 cm 8-pin to 3.5 mm audio adapter cable converts a Lightning (8‑pin) port to a standard 3.5 mm AUX jack for wired headphones or auxiliary inputs on compatible iPhone models. The cable is lightweight and compact for pocket or bag storage, making it convenient for in‑car audio, portable speakers, or older headphones without a Lightning connector. It supports iOS 13.1 or above and lists compatibility with iPhone 7 and iPhone 7 Plus. Specifications Connector A: 8‑pin (Lightning) Connector B: 3.5 mm audio jack (female) Length: 12 cm Compatibility: iPhone 7, iPhone 7 Plus; requires iOS 13.1 or later Condition: Brand new Size Guide Total cable length: 12 cm — short, intended for direct connection to nearby devices or headphone adapters Package Contents and Care Included: single 8‑pin to 3.5 mm audio adapter cable Care: store dry, avoid sharp bends, disconnect when not in use Use this adapter to connect 3.5 mm audio devices to compatible iPhones running iOS 13.1 or later.

Read more less

The H-011 Bluetooth 5.0 3.5mm AUX Audio Receiver converts a wired AUX input into a wireless Bluetooth audio link for car stereos and other speakers, supporting stereo A2DP playback and hands‑free calls via a built‑in microphone. Charge the receiver with the supplied USB cable (connect mini‑USB to the unit and a 5V USB port); the red LED indicates charging and the blue LED stays on when fully charged. Press and hold the power button to enter pairing mode; pair the device named H-011 (some phones request PIN 0000). The receiver remembers one paired phone and will automatically reconnect when powered on. Specifications Bluetooth version: V5.0 Bluetooth frequency: 2.4Hz Power charging: 5V 500mAh Transmission distance: 10 meters Frequency response: 20Hz–15kHz Size: 70 x 14 mm Built‑in microphone for hands‑free calling (A2DP/HFP support) Surface: skin‑friendly, scratch‑resistant, wear‑resistant Size Guide Length: 70 mm Diameter/width: 14 mm Compatibility & Package Contents Compatible with devices that support Bluetooth audio output and with car or speaker AUX inputs via a 3.5mm audio cable Includes the Bluetooth receiver and a USB charging cable (use a 5V USB power source) This receiver is intended to add Bluetooth audio streaming and hands‑free calling to a 3.5mm AUX input device.

Read more less

This jewelry watch band combines a bead chain design with metal and leather elements to create a decorative replacement strap for compatible Apple Watch models. The length is easy to adjust to fit your wrist, and the strap is designed for straightforward installation without harming the watch. The listing includes only the strap; the watch head is not included. Specifications Materials: metal and leather bead chain combination Adjustable length for wrist fit Color: as pictured (varies by seller) Package contents: one watch strap only Compatibility Small sizes: 38mm / 40mm / 41mm / 42mm — fits Series 3, 4, 5, 6, 7, 8, 9, 10 and SE models listed for these case sizes Large sizes: 42mm / 44mm / 45mm / 46mm / 49mm — fits Series and Ultra models listed for these case sizes Size Guide Choose the small band for 38–41mm Apple Watch case sizes Choose the large band for 42–49mm Apple Watch case sizes Care Wipe with a soft, dry cloth; avoid abrasive cleaners Designed to replace the factory band with a decorative metal-and-leather bead chain for compatible Apple Watch models.

Read more less

This genuine leather Apple Watch band provides a traditional leather look with adjustable length and a simple slide-in installation designed to avoid damage to the watch case. The strap is described as comfortable for daily wear and intended for users who want a leather alternative to sporty or silicone bands. Specifications Material: genuine leather Adjustment: easy to adjust length to fit your wrist Installation: easy to install, designed to avoid harm to the watch Package contents: one leather watch strap (watch body not included) Compatibility & Size Guide 38mm / 40mm / 41mm sizes: compatible with Apple Watch Series 10 (42mm listed), Series 9 (41mm), Series 8 (41mm), Series 7 (41mm), SE 2023 (41mm), SE 2022 (40mm), Series 6/5/4 (40mm), Series 3/2 (38mm) 44mm / 45mm / 46mm / 49mm sizes: compatible with Apple Watch Series 10 (46mm), Ultra/Ultra 2 (49mm), Series 9/8 (45mm), SE 2023/2022 (44mm), Series 6/5/4 (44mm), Series 3/2 (42mm) Intended use: replacement or alternate leather strap for compatible Apple Watch models.

Read more less

This steel replacement watch band provides an adjustable metal strap for Apple Watch models in two size groups, offering a comfortable fit, simple assembly, and bright color options. The strap is designed to attach using the Apple Watch connector style and can be resized to fit a range of wrist circumferences. Specifications Material: Steel Color: Bright colors (varies by listing) Adjustability: Length adjustable to fit wrist Included: Strap only (watch body not included) Assembly: Easy to assemble; designed not to damage the watch Compatibility / Size Guide Small band option (fits): 42mm / 41mm / 40mm / 38mm — compatible with Apple Watch Series 10 (42mm), Series 9 (41mm), Series 8 (41mm), Series 7 (41mm), Watch SE 2023 (41mm), Watch SE 2022 (40mm), SE (40mm), Series 6/5/4 (40mm), Series 3/2 (38mm), Watch 38mm. Large band option (fits): 46mm / 49mm / 45mm / 44mm — compatible with Apple Watch Series 10 (46mm), Watch Ultra 2/Ultra (49mm), Series 9/8 (45mm), Watch SE 2023/2022/SE (44mm), Series 6/5/4 (44mm), Series 3/2 (42mm), Watch 42mm. This band is intended to replace the original strap and provide an adjustable steel option for compatible Apple Watch models.

Read more less

Silicone hollow-out Apple Watch band designed for breathable, adjustable comfort and simple installation without affecting the watch body. The hollowed silicone construction increases airflow during wear and allows easy length adjustment to fit a range of wrist sizes. The band installs on compatible Apple Watch cases using the standard connector and is supplied as the strap only; the watch head is not included. Specifications Material: Silicone Style: Hollow-out, ventilated strap Included items: One replacement watch strap (watch not included) Compatibility: Fits Apple Watch case sizes listed below Size Guide 42/41/40/38mm group: compatible with Apple Watch Series 10 (42mm), Series 9–7 (41mm), SE models (40–41mm), Series 6–4 (40mm), Series 3–2 (38mm) 46/49/45/44mm group: compatible with Apple Watch Series 10 (46mm), Ultra/Ultra 2 (49mm), Series 9–8 (45mm), SE models (44mm), Series 6–4 (44mm), Series 3–2 (42mm) Care Instructions Hand wash with mild soap and water; air dry away from direct heat or sunlight Designed to replace an Apple Watch strap and provide ventilated, adjustable wear for compatible watch sizes.

Read more less

This fabric loop replacement strap offers a rugged, adjustable fit for Apple Watch models in two size groups, providing easy installation and a range of color options. The strap is designed to be comfortable for daily wear, simple to disassemble and install, and adjustable in length to suit different wrist sizes. Multiple colors are available so you can match the band to your style. Specifications Compatibility: See Size Guide for model-by-model compatibility Features: Rugged and durable construction; comfortable wear; easy to disassemble and install; adjustable length Colors: Multiple color options available Size Guide Small/Medium band fits 38mm / 40mm / 41mm / 42mm Apple Watch cases (compatible with Series 3–10, SE models as listed) Large band fits 44mm / 45mm / 46mm / 49mm Apple Watch cases (compatible with Series 2–10, Ultra models as listed) Compatibility Details 38–42mm group: Watch Series 3, 4, 5, 6, SE, Series 7–10 (38mm–42mm / 40mm–41mm sizes as listed) 44–49mm group: Watch Series 2–6, SE, Series 7–10, Watch Ultra and Ultra 2 (44mm–49mm / 45mm–46mm sizes as listed) Intended use: replacement wrist strap for compatible Apple Watch models.

Read more less

The Hawkeye MagSafe Skin Feel Case for iPhone 8 Plus and 7 Plus combines a slim, skin-feel finish with a rigid acrylic back and flexible TPU bumper for everyday protection and handling. The acrylic + TPU construction resists common scratches and surface wear while the lightweight design keeps the phone compact and easy to hold. Precise cutouts maintain unobstructed access to ports, buttons, and the camera, and the case is shaped for simple installation and removal. Specifications Material: Acrylic back + TPU bumper Compatibility: iPhone 8 Plus, iPhone 7 Plus Features: Skin-feel finish, precise cutouts, lightweight construction Size Guide Designed to fit the dimensions of iPhone 8 Plus and iPhone 7 Plus (standard Plus size models) Includes: one protective case; no additional accessories listed. This case is intended to protect and preserve the exterior of iPhone 8 Plus and iPhone 7 Plus while maintaining access to all functions.

Read more less

Slim electroplated TPU MagSafe case provides magnetic alignment for iPhone 11 Pro while preserving the phone's slim profile and allowing wireless charging. The flexible TPU shell resists normal scratches, dirt and abrasions and includes a lens film to protect the camera glass. Cutouts and button covers maintain access to all ports and controls, and the simple, understated shape offers a clean visual appearance. Specifications Material: Thermoplastic polyurethane (TPU) Finish: Electroplated exterior Compatibility: iPhone 11 Pro Features: MagSafe magnetic design; supports wireless charging Protection: Protects against normal scratches, dirt, tears and abrasions Includes: Lens film for camera protection Size Guide Designed specifically for the iPhone 11 Pro form factor (single size fit). Care instructions: wipe the case with a soft, dry or slightly damp cloth; avoid abrasive cleaners. Designed to protect and maintain wireless charging for an iPhone 11 Pro.

Read more less

This Electroplating MagSafe TPU Case combines a flexible thermoplastic polyurethane shell with a minimalist silhouette to protect iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max from everyday wear. The fitted design resists scratches, dirt, tears and abrasions while leaving buttons and ports fully accessible. Built-in MagSafe-compatible magnets support wireless charging and secure attachment to MagSafe accessories. An included lens film protects the camera lens from scratches without adding bulk. Specifications Material: TPU (thermoplastic polyurethane) Design: Electroplating finish, minimalist shape Protection: Guards against scratches, dirt, tears, abrasions MagSafe: Magnetic design supporting wireless charging Extras: Lens film for camera protection Size Guide Compatible models: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max Care & Package Contents Care: Wipe with a soft, damp cloth; avoid harsh chemicals Package contents: TPU case and lens film Protects and equips compatible iPhone 11 series phones for daily use while maintaining MagSafe wireless charging compatibility.

Read more less

Nylon braided magnetic watch band for Apple Watch 38–49mm combines a woven nylon exterior with metal magnetic hardware for a low-profile, adjustable fit. The band slips on and off easily, adjusts to wrist size, and is designed for replacement without damaging the watch body. Specifications Materials: nylon (braided) and metal Closure: magnetic fastening Included: one replacement watch strap (watch body not included) Compatibility: Apple Watch models listed below Size Guide Fits 38mm–42mm range (compatible with 38mm, 40mm, 41mm, 42mm Apple Watch models including Series 2–11 and SE variants as listed) Fits 44mm–49mm range (compatible with 44mm, 45mm, 46mm, 49mm Apple Watch models including Series 4–11, Ultra and SE variants as listed) This band is intended as a replacement strap for compatible Apple Watch sizes, providing an adjustable, magnetic alternative to original bands.

Read more less

This nylon braided band with a metal magnetic buckle offers an adjustable, comfortable strap option for compatible Apple Watch case sizes from 38mm to 49mm. The woven nylon surface provides a textured look while the metal magnetic clasp enables one-handed on/off and a secure fit without tools. The strap is designed for straightforward replacement and removal that will not damage the watch body. Specifications Materials: nylon braided strap, metal magnetic buckle Adjustment: length adjustable to fit a range of wrist sizes Package contents: one watch strap (watch not included) Compatibility: fits Apple Watch case sizes listed below Size Guide Small/Medium band: compatible with 38mm, 40mm, 41mm, 42mm case models (see compatibility list) Large band: compatible with 44mm, 45mm, 46mm, 49mm case models (see compatibility list) Length is adjustable via the magnetic buckle; choose the size matching your watch case. Intended as a replacement or style upgrade for Apple Watch users seeking an adjustable nylon strap with a magnetic metal buckle.

Read more less

This nylon loop watch band provides an adjustable, breathable strap for Apple Watch models that require a 38–49mm band, offering a secure fit and easy on/off adjustment. Key features Material: nylon Comfortable to wear and easy to put on and take off Adjustable length to fit a range of wrist sizes Designed for simple replacement without damaging the watch Fashionable woven appearance for a different visual style Specifications Compatible sizes: fits Apple Watch case sizes listed below (38mm–49mm) Package contents: one nylon loop strap (watch body not included) Size Guide & Compatibility Small/38–42mm group: compatible with Apple Watch 38mm, 40mm, 41mm, 42mm models (Series 2–11, SE models as listed) Large/44–49mm group: compatible with Apple Watch 42mm, 44mm, 45mm, 46mm, 49mm models (Series 3–11, Ultra models as listed) This strap is intended for users who need a replaceable, adjustable nylon band for compatible Apple Watch sizes.

Read more less

Nylon replacement strap with a mountain pattern designed for Apple Watch cases; comfortable to wear, simple to put on and remove, and sized to fit a wide range of Apple Watch models. The strap is made from woven nylon for everyday wear and adjusts in length to suit different wrist sizes without tools. Specifications Material: Nylon Design: Mountain pattern (strap only) Package contents: One watch strap (watch body not included) Compatibility: See Size Guide for model compatibility Size Guide Small/Medium strap: fits Apple Watch case sizes 38mm, 40mm, 41mm, 42mm (examples: Series 3–6 38/40mm, Series 7–11 40–42mm and SE 40mm/42mm) Large/XL strap: fits Apple Watch case sizes 44mm, 45mm, 46mm, 49mm (examples: Series 4–6 44mm, Series 7–11 45–49mm, Ultra models) This strap provides a themed replacement option for Apple Watch owners seeking a nylon band with an adjustable fit and easy installation.

Read more less