Complete your security setup with Syndmart's security accessories collection. Shop camera mounts, cable management kits, junction boxes, power supplies, replacement lenses, memory cards, hard drives, security signs and stickers, weatherproof housings, and more. Everything you need to install, upgrade, and maintain your security system for reliable long-term protection.
Send four CCTV video channels through one Cat-5 unshielded twisted-pair cable with this 4 Channel Passive UTP Video Balun. It uses differential signal transmission to help reduce interference during full-motion video transmission. Each twisted-pair connection carries one video channel. The balun requires no power, helping simplify installation and reduce project wiring expenses. It supports transmission distances up to 330 m with any passive UTP video transceiver, or up to 1,500 m with any active UTP video receiver.
Video systems: Compatible with NTSC, PAL, SECAM, and CCIR systems.
Protection: Built-in transient suppression protection.
Signal performance: DC–8 MHz frequency response and 60 dB common-mode rejection ratio.
Use this passive CCTV video balun to connect four video channels over twisted-pair cabling in compatible surveillance installations. Specifications
Product type: 4-channel passive UTP video balun
Transmission: Differential signal transmission
Video channels: Four channels through one Cat-5 unshielded twisted-pair cable
Distance with passive receiver: Up to 330 m
Distance with active receiver: Up to 1,500 m
Power requirement: No power required
Frequency response: DC–8 MHz
CMRR: 60 dB
Impedance: BNC: 75 ohms; RJ: 100 ohms
Supported systems: NTSC, PAL, SECAM, and CCIR
Protection: Built-in transient suppression
Packaging
One package weight: 0.15 kg / 0.33 lb
One package size: 11.5 × 9 × 5.5 cm / 4.53 × 3.54 × 2.17 in
Quantity per carton: 80 pieces
Carton weight: 12.80 kg / 28.22 lb
Carton size: 40 × 35 × 36 cm / 15.75 × 13.78 × 14.17 in
20GP loading: 529 cartons × 80 pieces = 42,320 pieces
40HQ loading: 1,228 cartons × 80 pieces = 98,240 pieces
Package Weight
One Package Weight
0.15kgs / 0.33lb
One Package Size
11.5cm * 9cm * 5.5cm / 4.53inch * 3.54inch * 2.17inch
Qty per Carton
80
Carton Weight
12.80kgs / 28.22lb
Carton Size
40cm * 35cm * 36cm / 15.75inch * 13.78inch * 14.17inch
Loading Container
20GP: 529 cartons * 80 pcs = 42320 pcs40HQ: 1228 cartons * 80 pcs = 98240 pcs
Extend CCTV video over UTP cable with this 2-pack of CYL-106C single-channel passive CCTV baluns. Each balun uses a male BNC connector and press-fit terminal blocks for installation with compatible CCTV equipment. The baluns support NTSC, PAL, and SECAM video formats. They require no power and provide full-motion CCTV video transmission up to 330 m when used with a passive transceiver. With any active UTP video receiver, the transmission distance reaches up to 1,500 m.
Signal protection: 60 dB crosstalk and noise immunity support clear video transmission.
Compact design: Small dimensions make installation easier in CCTV setups.
Frequency response: DC to 8 MHz for CCTV video signals.
Use the CYL-106C balun pair to connect CCTV cameras and video equipment over UTP cable. Specifications
Product type: Single-channel passive CCTV balun
Model: CYL-106C
Pack quantity: 2 baluns
Video formats: NTSC, PAL, and SECAM
Transmission distance: Up to 330 m with a passive transceiver; up to 1,500 m with any active UTP video receiver
Power requirement: No power required
Frequency response: DC to 8 MHz
Attenuation: 0.5 dB typical
CMRR: 60 dB
Crosstalk and noise immunity: 60 dB
Connectors: Male BNC and press-fit terminal blocks
Packaging
One package weight: 0.08 kg / 0.17 lb
One package size: 10 × 9.5 × 2 cm / 3.94 × 3.74 × 0.79 in
Quantity per carton: 240 pcs
Carton weight: 13.90 kg / 30.64 lb
Carton size: 40 × 38 × 30 cm / 15.75 × 14.96 × 11.81 in
20GP loading: 584 cartons × 240 pcs = 140,160 pcs
40HQ loading: 1,357 cartons × 240 pcs = 325,680 pcs
Package Weight
One Package Weight
0.08kgs / 0.17lb
One Package Size
10cm * 9.5cm * 2cm / 3.94inch * 3.74inch * 0.79inch
Qty per Carton
240
Carton Weight
13.90kgs / 30.64lb
Carton Size
40cm * 38cm * 30cm / 15.75inch * 14.96inch * 11.81inch
Loading Container
20GP: 584 cartons * 240 pcs = 140160 pcs40HQ: 1357 cartons * 240 pcs = 325680 pcs
Connect CCTV video over existing UTP CAT5 cable with this 2-pack of 1-channel passive CCTV video transceivers. Each transceiver supports video transmission through CAT5 cabling, helping you use a single cable type for compatible CCTV installations. No power supply is required, making these passive video baluns straightforward to add to a CCTV setup. The stated maximum CCTV video motion transmission distance is 600 metres. Using UTP CAT5 cable can also save 10–20% on wire costs.
Two-piece set: Includes two 1-channel passive CCTV video transceivers.
Cable type: Designed for video transmission via UTP CAT5 cable.
Power: No power required.
Transmission distance: Maximum CCTV video motion distance of 600 metres.
Wire costs: Stated to save 10–20% on wire costs.
Specifications
Product type: Passive CCTV video transceiver
Channels: 1 channel
Quantity: 2 transceivers
Transmission medium: UTP CAT5 cable
Power requirement: No power required
Maximum CCTV video motion distance: 600 m
Packaging
One package weight: 0.01 kg / 0.02 lb
Quantity per carton: 180 pcs
Carton weight: 8.20 kg / 18.08 lb
Carton size: 38 × 27 × 30 cm / 14.96 × 10.63 × 11.81 in
20GP loading: 866 cartons × 180 pcs = 155,880 pcs
40HQ loading: 2,011 cartons × 180 pcs = 361,980 pcs
Use this passive CCTV video transceiver set to transmit CCTV video through UTP CAT5 cable without power.
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
180
Carton Weight
8.20kgs / 18.08lb
Carton Size
38cm * 27cm * 30cm / 14.96inch * 10.63inch * 11.81inch
Loading Container
20GP: 866 cartons * 180 pcs = 155880 pcs40HQ: 2011 cartons * 180 pcs = 361980 pcs
Improve remote video signal transmission with the AD5301 Coaxial Video Signal Distribution Amplifier. It amplifies video signals in a balanced manner to help raise and balance signal loss and frequency distortion. The unit is compatible with white-and-black and color video systems. Use the adjustable gain and frequency response to suit your video signal setup. Gain reaches up to 6 dB, while the 10 Hz to 7.5 MHz bandwidth supports video signal distribution through coaxial connections. The AD5301 uses a 12 V DC input and 75-ohm input and output loads.
Signal adjustment: Adjustable gain and frequency response.
Video output: Maximum output video voltage of 2.5 V.
Connections: One BNC input and one BNC output.
Operating conditions: Temperature range from -10 to 45°C and maximum humidity of 90%.
The AD5301 is designed for remote video signal transmission where balanced signal distribution is required. Specifications
Product type: Video distribution amplifier
Input voltage: DC 12 V
Input load: 75 ohms
Output load: 75 ohms
Input connector: 1 BNC
Output connector: 1 BNC
Frequency response: Adjustable
Bandwidth (-3 dB): 10 Hz to 7.5 MHz
Gain: Adjustable, up to 6 dB
Maximum output video voltage: 2.5 V
Operating temperature: -10 to 45°C
Maximum humidity: 90%
Packaging
One package weight: 0.22 kg / 0.48 lb
One package size: 14.5 × 9.3 × 3.5 cm / 5.71 × 3.66 × 1.38 in
Quantity per carton: 24 pieces
Carton weight: 6.30 kg / 13.89 lb
Carton size: 30 × 20 × 20 cm / 11.81 × 7.87 × 7.87 in
20GP loading quantity: 2,222 cartons × 24 pieces = 53,328 pieces
40HQ loading quantity: 5,158 cartons × 24 pieces = 123,792 pieces
Package Weight
One Package Weight
0.22kgs / 0.48lb
One Package Size
14.5cm * 9.3cm * 3.5cm / 5.71inch * 3.66inch * 1.38inch
Qty per Carton
24
Carton Weight
6.30kgs / 13.89lb
Carton Size
30cm * 20cm * 20cm / 11.81inch * 7.87inch * 7.87inch
Loading Container
20GP: 2222 cartons * 24 pcs = 53328 pcs40HQ: 5158 cartons * 24 pcs = 123792 pcs
Extend CCTV video over standard Cat-5 unshielded twisted-pair cable with this 8-channel passive UTP video balun transmission system. Each twisted-pair wire carries one video channel, helping reduce project wiring costs while supporting full-motion video transmission. The system provides differential signal transmission with excellent anti-jamming performance and built-in transient suppression protection. It supports transmission distances up to 330 metres with any passive UTP video transceiver, or up to 1,500 metres when used with any active UTP video receiver. No power is required.
Video support: Compatible with NTSC, PAL, SECAM, and CCIR systems.
Signal performance: DC–8 MHz frequency response and 60 dB common-mode rejection ratio.
Connections: BNC terminal impedance is 75 Ω; connection terminal impedance is 100 Ω.
Specifications
Product type: 8-channel passive UTP video balun transmission system
Characteristic impedance: 100 Ω ± 20%
DC loop resistance: 18 Ω/100 m
Differential capacitance: 62 pF/m maximum
Working temperature: -10°C to 70°C
Storage temperature: -30°C to 70°C
Dimensions: 157 × 65 × 29 mm
Weight: 167 g
Packaging
One package weight: 0.35 kg / 0.78 lb
Quantity per carton: 24 pieces
Carton weight: 9.20 kg / 20.28 lb
Carton size: 40 × 30 × 30 cm / 15.75 × 11.81 × 11.81 in
Container loading: 20GP: 740 cartons × 24 pieces = 17,760 pieces; 40HQ: 1,719 cartons × 24 pieces = 41,256 pieces
Use it to connect multi-channel CCTV video across twisted-pair cabling in surveillance installations.
Package Weight
One Package Weight
0.35kgs / 0.78lb
Qty per Carton
24
Carton Weight
9.20kgs / 20.28lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 24 pcs = 17760 pcs40HQ: 1719 cartons * 24 pcs = 41256 pcs
Connect BNC equipment or coaxial cable to banana-style connections with this 5-pack BNC female to dual banana female RF adapter set. Each straight adapter has a nickel-plated finish and a 50-ohm impedance for compatible RF setups. The free-hanging installation makes each adapter suitable for use between separate connectors. You can use it with antenna systems, coaxial cable, LMR equipment, and wireless LAN equipment. The banana female connection can connect to a binding post using a spade lug, banana plug, or wire.
Pack quantity: Five RF adapters are included.
Connector format: BNC female jack to dual banana female jack.
Design: Straight, free-hanging adapter.
Finish: Nickel plating.
Impedance: 50 ohms.
Specifications
Product type: BNC female to dual banana female RF adapter
Function: Connects BNC to banana coaxial cable or equipment
Applications: Antenna, coaxial cable, LMR, and wireless LAN equipment
Connection options: Binding post with spade lug, banana plug, or wire
Packaging
One package weight: 0.08 kg / 0.19 lb
One package size: 11 × 7 × 2 cm / 4.33 × 2.76 × 0.79 in
Quantity per carton: 200 pcs
Carton weight: 16.50 kg / 36.38 lb
Carton size: 25 × 36 × 32 cm / 9.84 × 14.17 × 12.6 in
20GP loading: 925 cartons × 200 pcs = 185,000 pcs
40HQ loading: 2,149 cartons × 200 pcs = 429,800 pcs
This adapter set is intended for connecting BNC RF equipment with dual banana connections.
Package Weight
One Package Weight
0.08kgs / 0.19lb
One Package Size
11cm * 7cm * 2cm / 4.33inch * 2.76inch * 0.79inch
Qty per Carton
200
Carton Weight
16.50kgs / 36.38lb
Carton Size
25cm * 36cm * 32cm / 9.84inch * 14.17inch * 12.6inch
Loading Container
20GP: 925 cartons * 200 pcs = 185000 pcs40HQ: 2149 cartons * 200 pcs = 429800 pcs
Connect BNC equipment to an RCA connection with this BNC male to RCA female metal coaxial cable adapter. It provides a practical option for short-distance connections and has a simple, professional appearance for organized cabling. Use the adapter with antennas, broadcast equipment, radios, Wi-Fi, telecom systems, coaxial cable, LMR, wireless LAN devices, CCTV, microwave applications, and digital communication systems. Its metal construction is designed for durable use in compatible setups.
Connector configuration: BNC male to RCA female.
Connection type: Suitable for short-distance connections.
Appearance: Simple, professional design for cabling.
This adapter helps link compatible BNC and RCA connections in a range of communication and coaxial cable applications. Specifications
Material: Metal
Connector types: BNC male, RCA female
Packaging
Package weight: 0.02 kg / 0.05 lb
Package size: 5 × 2 × 2 cm / 1.97 × 0.79 × 0.79 in
Quantity per carton: 500 pieces
Carton weight: 6.00 kg / 13.23 lb
Carton size: 32 × 22 × 22 cm / 12.6 × 8.66 × 8.66 in
20GP loading: 1,721 cartons × 500 pieces = 860,500 pieces
40HQ loading: 3,996 cartons × 500 pieces = 1,998,000 pieces
General
Material
Metal
Connector Types
BNC Male, RCA Female
Package Weight
One Package Weight
0.02kgs / 0.05lb
One Package Size
5cm * 2cm * 2cm / 1.97inch * 0.79inch * 0.79inch
Qty per Carton
500
Carton Weight
6.00kgs / 13.23lb
Carton Size
32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch
Loading Container
20GP: 1721 cartons * 500 pcs = 860500 pcs40HQ: 3996 cartons * 500 pcs = 1998000 pcs
Send four video channels over standard UTP LAN cable with the QC204 4 Channel Passive BNC to UTP RJ45 Video Balun. Its passive design requires no power, making it suitable for installations where video transmission is needed without an additional power connection. The unit accepts BNC video input and provides two output options. Use the RJ45 output for four channels through one network cable, or connect each channel through the four screw outputs. Channel assignments are provided for straightforward wiring: pins 1–2 for channel 1, 4–5 for channel 2, 3–6 for channel 3, and 7–8 for channel 4.
Video distance: Supports up to 300 m for color video.
Installation: Uses standard LAN cable and patching.
Power note: Does not support 12 V power transmission.
Construction: Metal casing.
Use the QC204 to transmit four-channel video through UTP cabling in CCTV and video installation setups. Specifications
Product type: 4-channel passive BNC to UTP RJ45 video balun
Input: BNC video
Output 1: One RJ45 output for four channels
Output 2: Four screw outputs for four channels
Channel pin assignment: Pins 1–2, channel 1; pins 4–5, channel 2; pins 3–6, channel 3; pins 7–8, channel 4
Maximum color video working distance: 300 m
Power design: Passive; no power required
12 V power transmission: Not supported
Casing material: Metal
Dimensions: 96 × 80 × 30 mm
Product weight: 257 g
Packaging
One package weight: 0.23 kg / 0.51 lb
One package size: 11 × 10 × 5 cm / 4.33 × 3.94 × 1.97 in
Quantity per carton: 96 pieces
Carton weight: 26.90 kg / 59.30 lb
Carton size: 46 × 42 × 32 cm / 18.11 × 16.54 × 12.6 in
20GP loading: 431 cartons × 96 pieces = 41,376 pieces
40HQ loading: 1,001 cartons × 96 pieces = 96,096 pieces
Package Weight
One Package Weight
0.23kgs / 0.51lb
One Package Size
11cm * 10cm * 5cm / 4.33inch * 3.94inch * 1.97inch
Qty per Carton
96
Carton Weight
26.90kgs / 59.30lb
Carton Size
46cm * 42cm * 32cm / 18.11inch * 16.54inch * 12.6inch
Loading Container
20GP: 431 cartons * 96 pcs = 41376 pcs40HQ: 1001 cartons * 96 pcs = 96096 pcs
The Metal Power Surge Arrester PBD-220V is designed for AC 220V applications with a maximum discharge current of 10 kA. Its metal construction houses an input and output connection for A/L and B/N lines. With a maximum discharge voltage of 475V and a continual voltage rating of 320V, this unit is suited to electrical setups requiring surge arrester protection. The PBD-220V operates across a stated working temperature range of -60°C to 190°C. Specifications
Product type: Metal power surge arrester
Model: PBD-220V
Rated input: AC 220V
Rated output: AC 220V
Connection: Input A/L and B/N; output A/L and B/N
Material: Metal
Maximum discharge voltage: 475V
Continual voltage: 320V
Maximum discharge current: 10 kA
Response time: < 0.5 dB
Working temperature: -60°C to 190°C
Joint wastage: < 2 dB
Packaging
Package weight: 0.01 kg / 0.02 lb per package
Quantity per carton: 60 units
Carton weight: 6.80 kg / 14.99 lb
Carton size: 40 × 30 × 30 cm / 15.75 × 11.81 × 11.81 in
20GP loading: 740 cartons × 60 units = 44,400 units
40HQ loading: 1,719 cartons × 60 units = 103,140 units
This PBD-220V unit provides AC 220V surge arrester protection for compatible electrical connections.
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
60
Carton Weight
6.80kgs / 14.99lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 60 pcs = 44400 pcs40HQ: 1719 cartons * 60 pcs = 103140 pcs
Connect UHF and Mini UHF cables for short-distance cabling with this metal UHF female to Mini UHF male connector. Its compact 28 x 14 mm size suits installations where space matters, while the simple appearance keeps cabling neat and professional. The connector is designed for straightforward installation, helping you complete compatible cable connections with less time and effort. At 17 g, it is easy to handle during fitting and suitable for keeping with your cabling components.
Connector type: UHF female to Mini UHF male
Material: Metal
Application: Short-distance connection and cabling
Installation: Easy to install
This UHF adapter provides a practical connection between UHF and Mini UHF cable interfaces. Specifications
Product type: UHF female to Mini UHF male metal connector
Dimensions: 28 x 14 mm
Weight: 17 g
Packaging
One package weight: 0.01 kg / 0.02 lb
Quantity per carton: 300 pieces
Carton weight: 6.10 kg / 13.45 lb
Carton size: 20 x 11 x 11 cm / 7.87 x 4.33 x 4.33 in
20GP loading: 11,019 cartons × 300 pieces = 3,305,700 pieces
40HQ loading: 25,580 cartons × 300 pieces = 7,674,000 pieces
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
300
Carton Weight
6.10kgs / 13.45lb
Carton Size
20cm * 11cm * 11cm / 7.87inch * 4.33inch * 4.33inch
Loading Container
20GP: 11019 cartons * 300 pcs = 3305700 pcs40HQ: 25580 cartons * 300 pcs = 7674000 pcs
Protect video, data, and 12V power connections with the CYL01VP-3/12V 3-in-1 security surge protector. Its metal housing combines three protection functions in one unit, helping integrate video, data, and power protection for compatible security system connections. The protector supports a maximum transmission speed of 20MHz and provides a maximum discharge current of 10KA. With a working temperature range from -40°C to +85°C, it is designed for use across a broad range of operating conditions.
3-in-1 function: Supports video, data, and 12V power.
Surge specifications: Discharge voltage is 8V.
Signal performance: Insertion loss is 0.1dB.
Metal construction: Made from metal.
This surge protector is intended for security installations requiring combined video, data, and power protection. Specifications
Product type: Surge protector
Model: CYL01VP-3/12V
Material: Metal
Power: 12V
Functions: Video, data, power
Discharge voltage: 8V
Maximum continual voltage: 15V
Continual voltage: 18V
Maximum continual voltage: 27V
Maximum transmission speed: 20MHz
Maximum discharge current: 10KA
Response time: < 10db
Insertion loss: 0.1dB
Working temperature: -40°C to +85°C
Packaging
Individual package weight: 0.20kg / 0.44lb
Quantity per carton: 85 pieces
Carton weight: 17.00kg / 37.48lb
Carton size: 52cm × 36cm × 37cm / 20.47in × 14.17in × 14.57in
20GP loading: 385 cartons × 85 pieces = 32,725 pieces
40HQ loading: 893 cartons × 85 pieces = 75,905 pieces
Package Weight
One Package Weight
0.20kgs / 0.44lb
Qty per Carton
85
Carton Weight
17.00kgs / 37.48lb
Carton Size
52cm * 36cm * 37cm / 20.47inch * 14.17inch * 14.57inch
Loading Container
20GP: 385 cartons * 85 pcs = 32725 pcs40HQ: 893 cartons * 85 pcs = 75905 pcs
Protect 220V power and video connections with the CYL01VP-2 2-in-1 surge protector. Its metal construction combines power surge protection with video surge protection in one unit. The protector supports a maximum transmit speed of 20MHz and has an insertion loss of less than 0.1dB. A response time below 10ns provides a specified rapid response, while the maximum discharge current is 10kA.
Power protection: Includes a 320V continual voltage rating and 560V maximum continual voltage.
Video protection: Features an 8V discharge voltage and 15V maximum continual voltage.
Operating range: Designed for working temperatures from -40°C to 85°C.
Cable length: Maximum cable length is 0.35m.
Use this 220V surge protector where combined power and video surge protection is required. Specifications
Product type: 2-in-1 power and video surge protector
Model: CYL01VP-2/220V
Material: Metal
Power voltage: 220V
Video discharge voltage: 8V
Video maximum continual voltage: 15V
Maximum transmit speed: 20MHz
Power continual voltage: 320V
Power maximum continual voltage: 560V
Maximum discharge current: 10kA
Insertion loss (AE): < 0.1dB
Response time: < 10ns
Working temperature: -40°C to 85°C
Maximum cable length: 0.35m
Packaging
Individual package weight: 0.22kg / 0.47lb
Quantity per carton: 42 units
Carton weight: 9.10kg / 20.06lb
Carton size: 40cm × 30cm × 30cm / 15.75in × 11.81in × 11.81in
20GP loading: 740 cartons × 42 units = 31,080 units
40HQ loading: 1,719 cartons × 42 units = 72,198 units
Package Weight
One Package Weight
0.22kgs / 0.47lb
Qty per Carton
42
Carton Weight
9.10kgs / 20.06lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 42 pcs = 31080 pcs40HQ: 1719 cartons * 42 pcs = 72198 pcs
Connect CCTV DVR cable with this 5-pack of straight female BNC connectors. Each connector features a spring and is designed for CCTV applications. The 50/75-ohm characteristic impedance and 0–3 GHz frequency range support specified signal requirements across compatible setups. These BNC connectors are rated for temperatures from -40°C to 155°C and a voltage rating of 500 V RMS. Their listed electrical and mechanical specifications make them suitable for replacement or installation work involving CCTV DVR cabling.
Connector type: Straight female BNC connector with spring.
Pack quantity: Five connectors.
Application: CCTV DVR cable.
Specifications
Temperature range: -40°C to 155°C.
Insulation resistance: 5,000 ohms minimum.
Characteristic impedance: 50/75 ohms.
Frequency range: 0–3 GHz.
Voltage rating: 500 V RMS.
Disengage force: 0.6 N minimum.
Center conductor: 1.5 mΩ maximum.
Outer conductor: 1 mΩ maximum.
Durability: 500 cycles.
Intermediate pressurization: 1,500 V, 0.5 mA AC minimum.
Packaging
One package weight: 0.06 kg / 0.13 lb.
Quantity per carton: 100 units.
Carton weight: 5.30 kg / 11.68 lb.
Carton size: 30 × 18 × 18 cm / 11.81 × 7.09 × 7.09 in.
20GP loading: 2,743 cartons × 100 units = 274,300 units.
40HQ loading: 6,368 cartons × 100 units = 636,800 units.
Use these female BNC connectors to terminate compatible CCTV DVR cable connections.
Package Weight
One Package Weight
0.06kgs / 0.13lb
Qty per Carton
100
Carton Weight
5.30kgs / 11.68lb
Carton Size
30cm * 18cm * 18cm / 11.81inch * 7.09inch * 7.09inch
Loading Container
20GP: 2743 cartons * 100 pcs = 274300 pcs40HQ: 6368 cartons * 100 pcs = 636800 pcs
Protect video equipment connected by coaxial cable from high-voltage surges with this coaxial cable surge arrester. It helps reduce damage caused by lightning overvoltage, electrostatic discharge, and induced overvoltage. The arrester uses an input BNC plug and BNC output for coaxial video signal connections. Its 75-ohm impedance, 20 MHz bandwidth, and insertion loss below 0.5 dB support the stated signal requirements. A response time below 0.5 ns helps it respond quickly to surge events.
Connection: Input BNC and output BNC.
Signal protection: Designed for video digital signals transmitted through coaxial cable.
Construction: Aluminum and electronic parts in silver-tone and orange.
Lead length: Includes a 28 cm wire.
Use this coaxial cable surge arrester to help protect connected video equipment from electrical overvoltage. Specifications
Product type: Coaxial cable surge arrester
Material: Aluminum, electronic parts
Color: Silver tone, orange
Impedance: 75 ohm
Continual voltage: 5.5 V
Response time: Less than 0.5 ns
Bandwidth: 20 MHz
Insertion loss: Less than 0.5 dB
Working temperature: -60°C to +190°C
Wire length: 28 cm
Packaging
Individual package weight: 0.25 kg / 0.54 lb
Quantity per carton: 100 pieces
Carton weight: 10.80 kg / 23.81 lb
Carton size: 40 × 30 × 30 cm / 15.75 × 11.81 × 11.81 in
20GP loading: 740 cartons × 100 pieces = 74,000 pieces
40HQ loading: 1,719 cartons × 100 pieces = 171,900 pieces
Package Weight
One Package Weight
0.25kgs / 0.54lb
Qty per Carton
100
Carton Weight
10.80kgs / 23.81lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 100 pcs = 74000 pcs40HQ: 1719 cartons * 100 pcs = 171900 pcs
Connect BNC and SMA equipment with this BNC jack to SMA jack connector adapter. It uses an all-brass plug with a gold pin for short-distance connections. The simple appearance suits professional cabling, while the easy installation helps save time and money during setup.
Connector type: BNC jack to SMA jack adapter.
Construction: Metal material with an all-brass plug.
Contact: Gold pin.
Applications: Suitable for antennas, broadcast equipment, radios, and telecom connections.
Use: Intended for short-distance connections.
This BNC to SMA adapter provides a practical connection option for antenna, broadcast, radio, and telecom cabling. Specifications
Product type: BNC jack to SMA jack connector adapter
Material: Metal
Plug material: Brass
Pin material: Gold
Connection range: Short distance
Appearance: Simple and professional
Packaging
One package weight: 0.02 kg / 0.04 lb
One package size: 5 × 4 × 4 cm / 1.97 × 1.57 × 1.57 in
Quantity per carton: 500 pieces
Carton weight: 4.00 kg / 8.82 lb
Carton size: 15 × 15 × 12 cm / 5.91 × 5.91 × 4.72 in
20GP loading: 9,876 cartons × 500 pieces = 4,938,000 pieces
40HQ loading: 22,927 cartons × 500 pieces = 11,463,500 pieces
Package Weight
One Package Weight
0.02kgs / 0.04lb
One Package Size
5cm * 4cm * 4cm / 1.97inch * 1.57inch * 1.57inch
Qty per Carton
500
Carton Weight
4.00kgs / 8.82lb
Carton Size
15cm * 15cm * 12cm / 5.91inch * 5.91inch * 4.72inch
Loading Container
20GP: 9876 cartons * 500 pcs = 4938000 pcs40HQ: 22927 cartons * 500 pcs = 11463500 pcs
Protect RJ11-connected audio equipment from electrical surges and electromagnetic interference with this telephone line surge protector. It is designed for sensitive audio signal equipment affected by inductive voltage, static discharge, or operator over-voltage. The CYL D150T4H uses multiple levels of protection and responds quickly while keeping joint wastage low. Its integrated braided ground line helps divert surge energy. Connect it according to the instructions for straightforward operation. If the surge arrester is damaged, replace it with a new unit. Use this RJ11 surge protector to help shield compatible audio signal equipment from electrical disturbances through the telephone line. Specifications
Model: CYL D150T4H
Product type: RJ11 telephone line surge protector
Discharge voltage: ≤180 V
Response time: ≤1 ns
Working temperature: -60°C to +190°C
Maximum discharge current: 10 kA
Maximum continuous voltage: ≤150 V
Joint wastage: ≤0.5 dB
Protected pins: 2, 3, 4, and 5
Transmission speed: 10 Mbps
Dimensions: 80 mm × 25 mm × 25 mm
Weight: 119.2 g
Packaging
One package weight: 0.14 kg / 0.32 lb
Quantity per carton: 84 units
Carton weight: 10.20 kg / 22.49 lb
Carton size: 40 cm × 30 cm × 30 cm / 15.75 in × 11.81 in × 11.81 in
20GP loading: 740 cartons × 84 units = 62,160 units
40HQ loading: 1,719 cartons × 84 units = 144,396 units
Package Weight
One Package Weight
0.14kgs / 0.32lb
Qty per Carton
84
Carton Weight
10.20kgs / 22.49lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 84 pcs = 62160 pcs40HQ: 1719 cartons * 84 pcs = 144396 pcs
Connect BNC and N interfaces with this BNC jack to N jack connector adapter for antennas, radios, and related equipment. Its metal construction is designed for durable use, while the simple appearance supports neat, professional cabling. Designed for short-distance connections, this RF connector adapter is suitable for antenna, broadcast, radio, and telecom applications. Its straightforward installation helps simplify cabling work and supports different connection requirements.
Connector type: BNC jack to N jack adapter.
Material: Metal.
Connection range: Intended for short-distance connections.
Applications: Antennas, broadcast systems, radios, and telecom equipment.
Design: Simple, professional appearance for cabling.
Installation: Designed for easy installation.
Specifications
Product type: RF connector adapter.
Interface conversion: BNC jack to N jack.
Individual package weight: 0.01 kg / 0.02 lb.
Packaging
Quantity per carton: 250 pieces.
Carton weight: 6.90 kg / 15.21 lb.
Carton size: 16 × 15 × 13 cm / 6.3 × 5.91 × 5.12 in.
20GP loading: 8,547 cartons × 250 pieces = 2,136,750 pieces.
40HQ loading: 19,841 cartons × 250 pieces = 4,960,250 pieces.
Use this adapter to create short-distance BNC-to-N connections in antenna, radio, broadcast, and telecom cabling.
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
250
Carton Weight
6.90kgs / 15.21lb
Carton Size
16cm * 15cm * 13cm / 6.3inch * 5.91inch * 5.12inch
Loading Container
20GP: 8547 cartons * 250 pcs = 2136750 pcs40HQ: 19841 cartons * 250 pcs = 4960250 pcs
Connect an antenna or cable with this BNC jack to F plug connector. Its metal construction supports short-distance connections while giving your cabling a simple, professional appearance. The connector is designed for easy installation, helping you save time and money when setting up compatible equipment. Use it for antenna, broadcast, radio, and telecom applications. The compact format suits cable connections where a straightforward adapter is needed. Its lightweight package is also convenient for handling and storage.
Connection type: BNC jack to F plug.
Construction: Metal material.
Application: Antennas, broadcast, radios, and telecom.
Use: Short-distance connection and cabling.
Installation: Designed for easy installation.
Specifications
Product type: BNC jack to F plug connector.
Individual package weight: 0.01 kg / 0.03 lb.
Individual package size: 12 × 6 × 1 cm / 4.72 × 2.36 × 0.39 in.
Packaging
Quantity per carton: 500 pieces.
Carton weight: 4.20 kg / 9.26 lb.
Carton size: 22 × 18 × 16 cm / 8.66 × 7.09 × 6.30 in.
20GP loading: 4,208 cartons × 500 pieces = 2,104,000 pieces.
40HQ loading: 9,770 cartons × 500 pieces = 4,885,000 pieces.
This connector provides a practical BNC-to-F connection for short-distance antenna, broadcast, radio, and telecom cabling.
Package Weight
One Package Weight
0.01kgs / 0.03lb
One Package Size
12cm * 6cm * 1cm / 4.72inch * 2.36inch * 0.39inch
Qty per Carton
500
Carton Weight
4.20kgs / 9.26lb
Carton Size
22cm * 18cm * 16cm / 8.66inch * 7.09inch * 6.3inch
Loading Container
20GP: 4208 cartons * 500 pcs = 2104000 pcs40HQ: 9770 cartons * 500 pcs = 4885000 pcs
Help protect Ethernet data transmission from surges caused by lightning or static electricity with the CYL D05F4H-E100 surge protection device. Designed for 100 Mbps Ethernet connections, it supports high discharge current and uses multiple levels of protection. Its response time is less than or equal to 1 ns, helping address surge events quickly. The device protects pins 1/2/3/6 and has joint wastage of less than or equal to 0.5 dB, supporting low signal loss during connection.
Compact format: Measures 80 × 26 × 26 mm and weighs 100 g.
Electrical rating: Rated voltage is 5 V, with a protection voltage of 12–18 V.
Environmental range: Operates from -40°C to +80°C with humidity up to 95% at 25–30°C.
This Ethernet network surge protection device is intended to help safeguard compatible Ethernet systems and equipment from electrical surges. Specifications
Model: CYL D05F4H-E100
Transmission speed: 100 Mbps
Response time: ≤1 ns
Discharge current: 10 kA
Rated voltage: 5 V
Protection voltage: 12–18 V
Joint wastage: ≤0.5 dB
Protected pins: 1/2/3/6
Operating temperature: -40°C to +80°C
Humidity: ≤95% at 25–30°C
Product size: 80 × 26 × 26 mm
Net weight: 100 g
Packaging
One package weight: 0.12 kg / 0.26 lb
One package size: 13 × 7 × 4 cm / 5.12 × 2.76 × 1.57 in
Quantity per carton: 100 pieces
Carton weight: 12.00 kg / 26.46 lb
Carton size: 42 × 35 × 27 cm / 16.54 × 13.78 × 10.63 in
20GP loading: 671 cartons × 100 pieces = 67,100 pieces
40HQ loading: 1,559 cartons × 100 pieces = 155,900 pieces
Package Weight
One Package Weight
0.12kgs / 0.26lb
One Package Size
13cm * 7cm * 4cm / 5.12inch * 2.76inch * 1.57inch
Qty per Carton
100
Carton Weight
12.00kgs / 26.46lb
Carton Size
42cm * 35cm * 27cm / 16.54inch * 13.78inch * 10.63inch
Loading Container
20GP: 671 cartons * 100 pcs = 67100 pcs40HQ: 1559 cartons * 100 pcs = 155900 pcs
Connect CCTV equipment over UTP cable instead of coaxial cable with this 2-piece passive video balun set. It provides a practical way to link cameras, monitors, DVR cards, and recorders through a standard UTP cable system. The passive video balun is compatible with local area network systems. Pins 4 and 5 carry the video signal, while pins 7 and 8 support power transmission. Each unit includes a short power converter cable for installation.
Video transmission: Supports CCTV video signals over UTP cable.
Device compatibility: Works with cameras, monitors, DVR cards, and recorders.
Long-distance support: Black-and-white transmission distance exceeds 750 metres.
Included quantity: Two passive video baluns with power converter cables.
Use this CCTV BNC UTP transmission kit to connect compatible video equipment across a standard UTP cabling system. Specifications
Product type: Passive video balun
Quantity: 2 pieces
Maximum output: 1.1 Vp-p
Loss ratio: Greater than 2 dB
Rejection ratio: Less than 15 dB
Interference: Greater than 40 dB
Black-and-white transmission distance: Greater than 750 metres
BNC resistance: 75 ohms
UTP resistance: 100 ohms
Operating temperature: 0–55°C
Size per balun: Approximately 11.8 × 2.7 × 2 cm
Power converter cable length: Approximately 16 cm per cable
Packaging
Package weight: 0.12 kg / 0.27 lb
Quantity per carton: 100 pieces
Carton weight: 9.30 kg / 20.50 lb
Carton size: 50 × 33 × 33 cm / 19.69 × 12.99 × 12.99 in
20GP loading: 489 cartons × 100 pieces = 48,900 pieces
40HQ loading: 1,136 cartons × 100 pieces = 113,600 pieces
Package Weight
One Package Weight
0.12kgs / 0.27lb
Qty per Carton
100
Carton Weight
9.30kgs / 20.50lb
Carton Size
50cm * 33cm * 33cm / 19.69inch * 12.99inch * 12.99inch
Loading Container
20GP: 489 cartons * 100 pcs = 48900 pcs40HQ: 1136 cartons * 100 pcs = 113600 pcs
Connect BNC equipment to UHF connections with the UG-255/U BNC Plug to UHF Jack Connector. Its nickel-plated metal construction provides a practical solution for short-distance connections in cabling setups. The simple, professional appearance suits installations where a neat connection matters.
Connector format: BNC plug to UHF jack.
Construction: Metal material with nickel plating.
Installation: Designed for easy installation to help save time and money.
Applications: Suitable for antennas, broadcast equipment, radios, and telecommunications.
Use: Intended for short-distance connections.
Use this adapter when your antenna, radio, broadcast, or telecom setup requires a BNC plug-to-UHF jack connection. Specifications
Model: UG-255/U
Connector type: BNC plug to UHF jack
Finish: Nickel plated
Material: Metal
Application: Antennas, broadcast, radios, and telecom
Packaging
One package weight: 0.01 kg / 0.02 lb
Quantity per carton: 500 pieces
Carton weight: 6.20 kg / 13.67 lb
Carton size: 18 × 15 × 11 cm / 7.09 × 5.91 × 4.33 in
20GP loading: 8,978 cartons × 500 pieces = 4,489,000 pieces
40HQ loading: 20,843 cartons × 500 pieces = 10,421,500 pieces
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
500
Carton Weight
6.20kgs / 13.67lb
Carton Size
18cm * 15cm * 11cm / 7.09inch * 5.91inch * 4.33inch
Loading Container
20GP: 8978 cartons * 500 pcs = 4489000 pcs40HQ: 20843 cartons * 500 pcs = 10421500 pcs
