Monitor your property with confidence using Syndmart's security cameras collection. Shop indoor and outdoor cameras, wired and wireless options, 4K and HD models, night vision cameras, PTZ cameras, and PoE systems. Whether you're keeping an eye on your front door, garage, or entire property, we have the camera solution to fit your needs and budget.
Protect CCTV and other coaxial video equipment from lightning-related effects and instantaneous overvoltage surges with this BNC video surge arrester. The male-to-female unit uses an internal standard BNC interface for coaxial video and digital signal connections. Its two-part surge protection design combines small insertion loss with a large discharge current. Use it with coaxial communication equipment, including cable TV, satellite TV receivers, and monitoring systems. The blue aluminum housing measures 82 × 34 × 25 mm and includes a 28 cm cable for installation.
Surge capacity: Total surge current of 10 kA (8/20 µs).
Operating range: Ambient temperature from -40°C to +85°C.
Protection: IP20, with line-shield/earth-ground direction of action.
This BNC CCTV surge protector is intended for coaxial video and signal equipment protection. Specifications
Type: OVP VIDEO SPD
Model: OVP-Coax-Video-75B
Connector: BNC male to female
Material: Aluminum
Color: Blue
Standards for air and creepage distances: VDE 0110-1; IEC 60664-1: 1992-10
Total surge current: 10 kA (8/20 µs)
Ambient operating temperature: -40°C to +85°C
Degree of protection: IP20
Direction of action: Line-shield/earth ground
Product size: 82 × 34 × 25 mm
Cable length: 28 cm
Product weight: 86.4 g
Packaging
One package weight: 0.08 kg / 0.17 lb
One package size: 11 × 6.5 × 3 cm / 4.33 × 2.56 × 1.18 in
Quantity per carton: 108 pieces
Carton weight: 8.60 kg / 18.96 lb
Carton size: 40 × 30 × 30 cm / 15.75 × 11.81 × 11.81 in
20GP loading: 740 cartons × 108 pieces = 79,920 pieces
40HQ loading: 1,719 cartons × 108 pieces = 185,652 pieces
Package Weight
One Package Weight
0.08kgs / 0.17lb
One Package Size
11cm * 6.5cm * 3cm / 4.33inch * 2.56inch * 1.18inch
Qty per Carton
108
Carton Weight
8.60kgs / 18.96lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 108 pcs = 79920 pcs40HQ: 1719 cartons * 108 pcs = 185652 pcs
Monitor outdoor areas with the T13-2 1080P Solar Powered WiFi Security Camera. Its 1920 × 1080 resolution captures Full HD video, while the 90-degree viewing angle covers a broad area. The 3W solar panel supports the camera’s battery-powered design for outdoor installation. Motion detection, two-way audio, and infrared night vision help you check activity during the day or after dark. Two 850nm infrared LEDs provide a stated night-vision distance of 5–10 metres. The IP66 rating is suited to outdoor environments, and WiFi connectivity supports wireless network access.
Video: H.264 compression with 1920 × 1080 resolution.
Storage: Supports a TF card up to 128GB; card not included.
Installation: Includes a screw pack and screwdriver.
Use the T13-2 for wireless outdoor video monitoring around your property. Specifications
Model: T13-2
Image sensor: 1/2.7-inch CMOS progressive scan sensor
Lens: Fixed 3.6mm
Viewing angle: 90 degrees
Video compression: H.264
Functions: Motion detection, night vision, two-way audio
Night vision: Two 850nm infrared LEDs; 5–10m effective distance
Wireless: WiFi 802.11b/g/n
Protocols: HTTP, FTP, TCP/IP, UDP, SMTP, DHCP, PPPoE, DDNS, UPnP
Memory: TF card support up to 128GB; card not included
Solar panel: 3W
Battery: Two 18650 batteries included
Ingress protection: IP66
Operating temperature: -20°C to 50°C
Product dimensions: 22 × 9.2 × 6.5cm
Product weight: 545g
Package Contents
1 × Camera
1 × User manual
1 × Screw pack
1 × Screwdriver
Packaging
Individual package size: 25 × 15 × 12cm
Individual package weight: 0.73kg
Quantity per carton: 20 units
Carton size: 62 × 52 × 32cm
Carton weight: 17.50kg
20GP loading: 258 cartons × 20 units = 5,160 units
40HQ loading: 600 cartons × 20 units = 12,000 units
General
Model
T13-2
Power Depletion
3W
Performance
Motion detection, Night Vision, Two Way Audio
Memory
TF Card, up to 128GB (not included)
Network
Wireless
WiFi 802.11 b/g/n
Protocol
DDNS, UDP, SMTP, UPNP, DHCP, PPPOE, FTP, HTTP, TCP/IP
System / Hardware
Image Sensor
CMOS
Sensor Size
1/2.7 inch Progressive Scan
Lens
3.6mm, 90 Degree View Angle
Media Format
Video Compression Format
H.264
Resolution
1920*1080
Night Vision
Infrared Distance
5~10m
Configuration
2 infrared LEDs
Physical Environment
Ingress Protection
IP66
Operate Temperature
-20 to 50 Degree Celsius
Battery
Capacity
2200mAh
Dimensions
Size
22x9.2x6.5cm
Weight
545g
Package Weight
One Package Weight
0.73kgs / 1.61lb
One Package Size
25cm * 15cm * 12cm / 9.84inch * 5.91inch * 4.72inch
Qty per Carton
20
Carton Weight
17.50kgs / 38.58lb
Carton Size
62cm * 52cm * 32cm / 24.41inch * 20.47inch * 12.6inch
Loading Container
20GP: 258 cartons * 20 pcs = 5160 pcs40HQ: 600 cartons * 20 pcs = 12000 pcs
Connect up to 16 CCTV camera video channels through UTP CAT5 cable with this passive video transceiver. Its metal case houses a no-power-required receiver designed for full-motion CCTV video transmission over distances up to 330 metres. When paired with any active UTP video receiver, the transmission distance can reach up to 1,500 metres.
UTP transmission: Uses UTP CAT5 cable for CCTV video transmission and can save 10–20% on wire costs.
Signal protection: Provides interference rejection and transient protection.
System support: Applicable to NTSC, PAL, SECAM, and CCIR video systems.
Installation: Passive operation requires no power supply.
This 16-channel passive video receiver helps route CCTV camera signals through structured UTP cabling. Specifications
Product type: 16-channel passive video receiver
Housing: Metal case
Frequency response: DC–8 MHz
CMRR: 60 dB
Impedance: BNC: 75 Ω; RJ45: 100 Ω
Characteristic impedance: 100 Ω ± 20 Ω
DC loop resistance: 18 Ω/100 m
Differential capacitance: 62 pF/m maximum
Working temperature: −10°C to 70°C
Storage temperature: −30°C to 70°C
Dimensions: 28.5 × 11.5 × 5 cm
Supported systems: NTSC, PAL, SECAM, and CCIR
Maximum transmission distance: 330 m; up to 1,500 m with any active UTP video receiver
Power requirement: No power required
Packaging
One package weight: 1.36 kg / 2.99 lb
Quantity per carton: 8 pieces
Carton weight: 11.20 kg / 24.69 lb
Carton size: 40 × 33 × 32 cm / 15.75 × 12.99 × 12.6 in
20GP loading: 631 cartons × 8 pieces = 5,048 pieces
40HQ loading: 1,465 cartons × 8 pieces = 11,720 pieces
Package Weight
One Package Weight
1.36kgs / 2.99lb
Qty per Carton
8
Carton Weight
11.20kgs / 24.69lb
Carton Size
40cm * 33cm * 32cm / 15.75inch * 12.99inch * 12.6inch
Loading Container
20GP: 631 cartons * 8 pcs = 5048 pcs40HQ: 1465 cartons * 8 pcs = 11720 pcs
Reduce CCTV video interference with this passive coaxial video ground loop isolator. It connects between compatible CCTV equipment using a BNC male connector and a BNC female connector, with a mini cable on both sides. No power supply is required, making installation straightforward in CCTV video systems. The adapter helps prevent video-signal distortion caused by ground loops. It is designed to eliminate picture tearing, cross talk, and rolling. It also helps prevent interference from power cables laid by others. Built-in TVS (Transient Voltage Suppressors) provide surge protection for the connected video signal path. Use this BNC ground loop isolator to address common video interference in CCTV installations without adding a separate power connection. Specifications
Product type: CCTV coaxial video ground loop isolator
Connection: BNC male to BNC female
Cable design: Mini cable on both sides
Operation: Passive; no power required
Function: Prevents video-signal distortion caused by video ground loops
Interference control: Eliminates picture tearing, cross talk, and rolling
Protection: Built-in TVS (Transient Voltage Suppressors) for surge protection
Packaging
Individual package weight: 0.14 kg / 0.31 lb
Quantity per carton: 60 pieces
Carton weight: 6.70 kg / 14.77 lb
Carton size: 46 × 30 × 30 cm / 18.11 × 11.81 × 11.81 in
20GP loading: 644 cartons × 60 pieces = 38,640 pieces
40HQ loading: 1,495 cartons × 60 pieces = 89,700 pieces
Package Weight
One Package Weight
0.14kgs / 0.31lb
Qty per Carton
60
Carton Weight
6.70kgs / 14.77lb
Carton Size
46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch
Loading Container
20GP: 644 cartons * 60 pcs = 38640 pcs40HQ: 1495 cartons * 60 pcs = 89700 pcs
Monitor indoor or outdoor areas with the ESCAM QF370 3MP Solar WiFi Security Camera. Its 2048 × 1536 resolution captures high-definition video, while PIR and AI human detection help identify movement within 12 metres. The UBox app sends alarm notifications to Android and iPhone devices. The removable solar panel works with the built-in 10,400mAh battery to support continuous charging and extended standby operation. Intelligent wake-up and standby modes help reduce power use. Dual-light full-colour night vision combines infrared and white LEDs, each reaching up to 15 metres.
Two-way communication: Use the built-in microphone and speaker for voice intercom, with monitoring coverage of about 20 metres.
Flexible storage: Save footage to cloud storage or a TF card up to 128GB.
Outdoor design: IP66 protection supports indoor and outdoor installation.
The ESCAM QF370 provides solar-powered WiFi video monitoring with motion alerts and two-way audio. Specifications
Model: ESCAM QF370
Resolution: 3MP, 2048 × 1536 pixels
Video compression: H.265
Detection: PIR human detection and AI human detection
Detection distance: 0–12m
Detection angle: 95°
Viewing angle: 105°
Night vision: Infrared and white light, up to 15m
Connectivity: Wireless 2.4GHz WiFi
Power: Monocrystalline silicon solar panel and built-in 10,400mAh battery
App: UBox for Android and iPhone OS
Storage: Cloud storage and TF card up to 128GB; card not included
Protection: IP66
Operating temperature: -30°C to 60°C
Working humidity: 0–90% RH
Package Contents
1 × IP camera
1 × Solar panel
2 × Solar panel holders
1 × Charging cable
2 × Screw packs
1 × Quick Start Guide
Packaging
Individual package: 19 × 13.2 × 9.5cm; 0.57kg
Carton quantity: 20 units
Carton size: 36 × 36 × 40cm
Carton weight: 12.30kg
Container loading: 20GP: 514 cartons, 10,280 units; 40HQ: 1,194 cartons, 23,880 units
General
Performance
Motion detection, Night Vision, Alarm detection, Two-way voice intercom, Two Way Audio
Memory
up to 128GB (not included)
Network
Wireless
2.4GHz
System / Hardware
Mobile Access
Android, iPhone OS
Pixels
3.0MP
Pan/Tilt-Horizontal Angle
95 degrees
Pan/Tilt-Vertical Angle
105 degree
Media Format
Video Compression Format
H.265
Resolution
2048*1536
Night Vision
Infrared Distance
15m
NVR
Wireless Port
WiFi
Physical Environment
Environment
Outdoor
Ingress Protection
IP66
Operate Temperature
-30 to 60 Degree Celsius
Working Humidity
0 to 90 percent
Package Include
Package Contents
1 x Camera 1 x USB Cable 1 x User Manual 2 x Screws 1 x Solar Panel
Package Weight
One Package Weight
0.57kgs / 1.25lb
One Package Size
19cm * 13.2cm * 9.5cm / 7.48inch * 5.2inch * 3.74inch
Qty per Carton
20
Carton Weight
12.30kgs / 27.12lb
Carton Size
36cm * 36cm * 40cm / 14.17inch * 14.17inch * 15.75inch
Loading Container
20GP: 514 cartons * 20 pcs = 10280 pcs40HQ: 1194 cartons * 20 pcs = 23880 pcs
Connect four CCTV video channels over UTP cabling with this passive 4-channel video balun. It converts BNC video signals for transmission through RJ45 UTP cable, helping you organise multiple camera feeds through one cable. You can use one UTP cable for four video signals, or use four UTP connections to carry four video signals with camera power. The balun requires no power supply and supports a working distance of up to 600 metres. It is also suitable for DVD video, projectors and TV video signals, making it useful for different analogue video connection setups.
Four channels: Supports four BNC video channels.
UTP transmission: Carries four video signals through one UTP cable, or through four UTP connections with camera power.
Passive design: Requires no power.
Signal handling: Uses different signal transmission with anti-jamming ability.
Connection support: Suitable for CCTV cameras, DVD video, projectors and TV video signals.
Use this 4-channel CCTV video balun to transmit multiple analogue video signals over UTP cable. Specifications
Product type: 4-channel CCTV video balun
Connections: BNC to UTP RJ45
Video channels: 4
Working distance: 600 metres
Power requirement: Passive device; no power required
Length: Approximately 17.4 cm
Weight: 141 g
Packaging
One package weight: 0.01 kg / 0.02 lb
Quantity per carton: 60 pieces
Carton weight: 9.10 kg / 20.06 lb
Carton size: 46 × 30 × 30 cm / 18.11 × 11.81 × 11.81 inches
20GP loading: 644 cartons × 60 pieces = 38,640 pieces
40HQ loading: 1,495 cartons × 60 pieces = 89,700 pieces
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
60
Carton Weight
9.10kgs / 20.06lb
Carton Size
46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch
Loading Container
20GP: 644 cartons * 60 pcs = 38640 pcs40HQ: 1495 cartons * 60 pcs = 89700 pcs
Keep an eye on your baby from another room with the BM-SP820 baby monitor. Its 2.4-inch TFT LCD screen shows the camera view in 320 × 240 resolution, while 2.4GHz wireless digital technology supports transmission up to 300 metres in an open area. Built-in 850nm IR LEDs provide night vision up to 5 metres. The camera also includes a microphone, speaker, and two-way audio communication, so you can listen and respond through the monitor. Baby room temperature detection helps you check the nursery environment, while the built-in lullaby function supports bedtime routines.
Flexible placement: The included monitor shelf uses a VHB sticker for wall installation.
Portable monitoring: The receiver has a built-in rechargeable lithium battery.
Camera view: The 70-degree viewing angle helps show more of the room.
This baby monitor is designed for viewing, listening, and communicating with your baby during daily nursery routines. Specifications
Model: BM-SP820
Material: ABS
Power supply: 5V
Wireless frequency: 2.4GHz
Transmission distance: 300m in open area
Monitor screen: 2.4-inch TFT LCD
Screen resolution: 320 × 240 RGB
Camera sensor: 1/3-inch colour CMOS
Camera pixels: 640 × 480
Lens: EFL 3.6mm, F2.8
Viewing angle: 70 degrees
Night vision: 850nm IR LED, up to 5m
Audio: Built-in microphone and speaker with two-way communication
Additional functions: Lullaby and baby room temperature detection
Memory card style: Micro SD card
Package Contents
1 × Baby monitor
1 × Camera
2 × Power chargers
1 × Monitor shelf with VHB sticker
Packaging
Package weight: 0.58kg / 1.27lb
Package size: 22 × 18 × 9cm / 8.66 × 7.09 × 3.54in
Quantity per carton: 16 units
Carton weight: 9.20kg / 20.28lb
Carton size: 46 × 36 × 32cm / 18.11 × 14.17 × 12.6in
Charger options: US, EU, UK, or AU
Container loading: 20GP: 503 cartons × 16 units = 8,048 units; 40HQ: 1,168 cartons × 16 units = 18,688 units
General
Model
BM-SP820
Material
ABS
Power Supply
5V
Memory Card Style
Micro SD Card
Frequency
2.4GHz
Transmission Distance
300m
Monitor
Screen Size
2.4 inch LCD
Screen Material
TFT
Resolution
320*240 RGB
Camera
Sensor
1/3 inch CMOS
View Angle
70 degree
Pixel
640*480
Night Vision Distance
5m
IR LED Type
850nm
Package Include
Package Contents
1 x baby monitor 1 x Camera 2 x Power Charger (US, EU, UK, AU optional)
Package Weight
One Package Weight
0.58kgs / 1.27lb
One Package Size
22cm * 18cm * 9cm / 8.66inch * 7.09inch * 3.54inch
Qty per Carton
16
Carton Weight
9.20kgs / 20.28lb
Carton Size
46cm * 36cm * 32cm / 18.11inch * 14.17inch * 12.6inch
Loading Container
20GP: 503 cartons * 16 pcs = 8048 pcs40HQ: 1168 cartons * 16 pcs = 18688 pcs
Transmit four channels of CCTV video over Cat-5 unshielded twisted-pair cable with this 4 Channel Active UTP Video Transmitter. It supports NTSC, PAL, SECAM, and CCIR systems, with full-motion video transmission over distances up to 2,400 metres (7,200 feet). The unit includes four BNC ports, an 18-pin RJ45 socket, and an eight-position green terminal block. Separate brightness and sharpness adjustment knobs let you set each channel. It receives balanced signals, converts them to unbalanced signals, and raises the received signal. Use it for video monitoring or video meeting applications. Specifications
Product type: 4-channel UTP video transmitter
Channel count: 4
Supported systems: NTSC, PAL, SECAM, and CCIR
Transmission distance: Up to 2,400 m (7,200 ft)
Material: Metal
Frequency response: DC–8 MHz
CMRR: 60 dB
Impedance: BNC terminal: 75 ohms; connection terminal: 100 ohms
Characteristic impedance: 100 ± 20 ohms
DC loop resistance: 18 ohms/100 m
Connections: 18-pin RJ45 socket, eight-position green terminal block, and four BNC ports
Adjustments: Four brightness knobs and four sharpness knobs
Operating temperature: −10 to 70°C
Voltage: DC 12 V
Maximum current: 200 mA
Dimensions: 20 × 7 × 4.3 cm
Colour: Silver tone
Weight: 579 g
This active UTP transmitter is designed for four-channel CCTV video transmission in monitoring and meeting systems. Packaging
Quantity per carton: 20 units
Carton weight: 16.40 kg (36.16 lb)
Carton size: 60 × 40 × 40 cm (23.62 × 15.75 × 15.75 in)
20GP loading: 277 cartons × 20 units = 5,540 units
40HQ loading: 644 cartons × 20 units = 12,880 units
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
20
Carton Weight
16.40kgs / 36.16lb
Carton Size
60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch
Loading Container
20GP: 277 cartons * 20 pcs = 5540 pcs40HQ: 644 cartons * 20 pcs = 12880 pcs
Protect a 12V setup with the CYL01VP-3/12V video data power surge protector. This metal device combines video, data, and power protection in one unit, making it suitable for systems that use all three connections. The surge protector has a maximum discharge current of 10 kA and a discharge voltage of 8 V. It supports a maximum transmission speed of 20 MHz, with 0.1 dB insertion loss. Its operating temperature range is -40°C to +85°C.
3-in-1 function: Supports video, data, and 12V power protection.
Compact format: Measures 6.5 × 2.6 × 2.6 cm and weighs 63 g.
Metal construction: Designed in a metal housing for installation within compatible systems.
Use the CYL01VP-3/12V to provide combined video, data, and power surge protection for 12V equipment. Specifications
Product type: Video data power surge protector
Model: CYL01VP-3/12V
Rated power: 12V
Functions: Video, data, and power
Material: Metal
Discharge voltage: 8V
Maximum transmission speed: 20MHz
Maximum discharge current: 10kA
Response time: < 10dB
Insertion loss: 0.1dB
Working temperature: -40°C to +85°C
Dimensions: 6.5 × 2.6 × 2.6cm
Product weight: 63g
Package Contents
1 × User manual
Packaging
Package weight: 0.09kg / 0.20lb
Package size: 10 × 4.5 × 2.5cm / 3.94 × 1.77 × 0.98in
Quantity per carton: 200 pieces
Carton weight: 16.00kg / 35.27lb
Carton size: 47 × 22 × 27cm / 18.5 × 8.66 × 10.63in
20GP loading: 955 cartons × 200 pieces = 191,000 pieces
40HQ loading: 2,217 cartons × 200 pieces = 443,400 pieces
General
Material
Metal
Size
6.5*2.6*2.6cm
Weight
63g
Package Include
Package Contents
1 x User Manual
Package Weight
One Package Weight
0.09kgs / 0.20lb
One Package Size
10cm * 4.5cm * 2.5cm / 3.94inch * 1.77inch * 0.98inch
Qty per Carton
200
Carton Weight
16.00kgs / 35.27lb
Carton Size
47cm * 22cm * 27cm / 18.5inch * 8.66inch * 10.63inch
Loading Container
20GP: 955 cartons * 200 pcs = 191000 pcs40HQ: 2217 cartons * 200 pcs = 443400 pcs
Keep an eye on children, pets, and your home with the SECTEC 1080P Pan Tilt WiFi Indoor Security Camera. Its 1920 × 1080 resolution shows clearer detail for remote, real-time viewing on your mobile phone. The camera pans 355 degrees horizontally and tilts 135 degrees vertically, helping you view a wider area with fewer blind spots. Up to 10 people can watch online at the same time, so you can share access with family through the app.
Night vision: Six infrared LEDs support viewing in low-light conditions.
Storage: Use cloud storage or a TF card up to 64GB. The card is not included.
Flexible monitoring: Check live video remotely and play stored footage.
Use this indoor security camera for convenient home monitoring from your phone. Specifications
Brand: SECTEC
Product type: Indoor security camera
Video resolution: 1920 × 1080
Image sensor: CMOS
Image sensor resolution: 2.0MP
Lens: 3.6mm
Horizontal pan angle: 355 degrees
Vertical tilt angle: 135 degrees
Night vision: 6 infrared LEDs
Maximum online viewers: 10
Memory: TF card, up to 64GB; card not included
Camera dimensions: 7.5 × 6.8 × 10.6cm
Media format resolution: 1920 × 1080
Package Contents
1 × Camera
1 × USB cable
1 × User manual
1 × Power charger
1 × Screws set
Packaging
Individual package weight: 0.31kg / 0.68lb
Individual package size: 15 × 10 × 10cm / 5.91 × 3.94 × 3.94in
Quantity per carton: 40 pieces
Carton weight: 13.50kg / 29.76lb
Carton size: 52 × 42 × 32cm / 20.47 × 16.54 × 12.6in
20GP loading: 381 cartons × 40 pieces = 15,240 pieces
40HQ loading: 885 cartons × 40 pieces = 35,400 pieces
General
Memory
TF Card, up to 64GB (not included)
Network
Online Visitor (Max.)
10
System / Hardware
Image Sensor
CMOS
Pixels
2.0MP
Lens
3.6mm
Pan/Tilt-Horizontal Angle
355 degrees
Media Format
Resolution
1920*1080
Night Vision
Configuration
6 infrared LEDs
Dimensions
Size
7.5x6.8x10.6cm
Package Include
Package Contents
1 x Camera 1 x USB Cable 1 x User Manual 1 x Power Charger 1 x Screws Set
Package Weight
One Package Weight
0.31kgs / 0.68lb
One Package Size
15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch
Qty per Carton
40
Carton Weight
13.50kgs / 29.76lb
Carton Size
52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch
Loading Container
20GP: 381 cartons * 40 pcs = 15240 pcs40HQ: 885 cartons * 40 pcs = 35400 pcs
Protect your CCTV coaxial connections from indirect lightning effects and instantaneous overvoltage with this 8-channel CCTV BNC surge protector. It provides eight BNC protection channels for coaxial communication equipment, including cable TV, satellite TV receivers, and monitoring systems. The internal standard BNC interface uses a male-to-female connection for straightforward installation between compatible equipment and coaxial cable. Line-to-line and line-to-ground protection helps address surge conditions that may damage coaxial cables or connected equipment.
Eight channels: Protects up to eight compatible BNC coaxial lines.
Fast response: Response time is 1 ns, with 0.2 dB insertion loss.
Surge handling: Nominal discharge current is 5 kA, with a discharge current of 10 kA at 8/20 μs.
This 8-channel BNC arrester is designed for surge protection in CCTV and other coaxial communication installations. Specifications
Product type: CCTV BNC lightning arrester and surge protector
Channels: 8
Interface type: BNC, male to female
Working voltage: 5 V
Maximum working voltage: 10 V
Nominal discharge current: 5 kA (8/20 μs)
Discharge current: 10 kA (8/20 μs)
Voltage limit: 15 V
Data transfer rate: 100 Mbps
Insertion loss: 0.2 dB
Response time: 1 ns
Protection method: Line to line and line to ground
Working temperature: -25°C to +65°C
Humidity: Approximately 95% at 25°C–30°C
Test standard: IEC 61643-21:2000
Cable length: Approximately 400 mm
Dimensions: Approximately 168 × 80 × 40 mm
Packaging
One package weight: 0.64 kg / 1.40 lb
Quantity per carton: 16 units
Carton weight: 11.30 kg / 24.91 lb
Carton size: 46 × 30 × 30 cm / 18.11 × 11.81 × 11.81 in
20GP loading: 644 cartons × 16 units = 10,304 units
40HQ loading: 1,495 cartons × 16 units = 23,920 units
Package Weight
One Package Weight
0.64kgs / 1.40lb
Qty per Carton
16
Carton Weight
11.30kgs / 24.91lb
Carton Size
46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch
Loading Container
20GP: 644 cartons * 16 pcs = 10304 pcs40HQ: 1495 cartons * 16 pcs = 23920 pcs
Extend CCTV camera video over UTP cable with the Passive UTP Video Transceiver 103C. It supports NTSC, PAL, and SECAM formats, giving you flexible video transmission for compatible surveillance systems. Used with any passive transceiver, it supports full-motion CCTV video up to 330 metres. Pair it with an active UTP video receiver for distances up to 1,500 metres. No power is required, and the compact design with a Press-Fit terminal block helps simplify installation.
Video protection: 60 dB crosstalk and noise immunity help support clear signal transmission.
Connection: BNC and 100-ohm terminal interfaces are provided.
Compact format: Measures 39 × 16 × 19 mm for space-conscious installations.
Use this passive video transceiver to link compatible CCTV cameras with UTP-based surveillance cabling. Specifications
Product type: Passive UTP video transceiver
Model: 103C
Video formats: NTSC, PAL, SECAM
Transmission distance: Up to 330 m with any passive transceiver; up to 1,500 m with any active UTP video receiver
Power requirement: No power required
Frequency response: DC to 8 MHz
Attenuation: 0.5 dB typical
Impedance: BNC 75 ohms; terminal 100 ohms
CMRR: 60 dB
Working temperature: -10°C to +70°C
Storage temperature: -30°C to +70°C
Humidity: 0–95%
Dimensions: 39 × 16 × 19 mm
Packaging
One package weight: 0.07 kg / 0.16 lb
Quantity per carton: 100 pieces
Carton weight: 7.10 kg / 15.65 lb
Carton size: 42 × 46 × 27 cm / 16.54 × 18.11 × 10.63 in
20GP loading: 511 cartons × 100 pieces = 51,100 pieces
40HQ loading: 1,186 cartons × 100 pieces = 118,600 pieces
Package Weight
One Package Weight
0.07kgs / 0.16lb
Qty per Carton
100
Carton Weight
7.10kgs / 15.65lb
Carton Size
42cm * 46cm * 27cm / 16.54inch * 18.11inch * 10.63inch
Loading Container
20GP: 511 cartons * 100 pcs = 51100 pcs40HQ: 1186 cartons * 100 pcs = 118600 pcs
Keep an eye on your space with the CAMSOY S1 HD 720P Wireless WiFi Mini Security Camera. Its compact 34 × 34 × 34 mm design weighs about 40 g, making it easy to carry and position. A rotating base, powerful magnetic sheet, and nut bracket support flexible installation. Connect through AP local mode or IP remote mode to view remotely. The 140-degree lens records 1280 × 720P video in MP4 format using H.264 compression. Eight infrared LEDs provide night vision, while the photosensitive sensor switches night vision on and off automatically.
Recording modes: Choose full-time recording, timed capture, or motion detection recording.
Motion alerts: The camera starts recording when movement is detected and sends an alarm push notification for abnormalities.
Timed capture: Take an image automatically every 15 seconds.
Battery: The built-in 800 mAh rechargeable polymer lithium battery provides standby time of up to 5 hours.
This mini WiFi security camera is designed for portable monitoring with local or remote viewing. Specifications
Brand: CAMSOY
Model: S1
Image sensor: CMOS
Resolution: 1280 × 720P
Lens view angle: 140 degrees
Video compression: H.264
Video format: MP4
Night vision: 8 infrared LEDs
Storage: TF card up to 64 GB; card not included
Interface: Micro USB
Connection: AP local connection and IP remote connection
Recording: Full-time, timed capture, motion detection, and loop recording
Battery: Built-in 800 mAh rechargeable polymer lithium battery
Dimensions: 34 × 34 × 34 mm
Net weight: About 40 g
Package Contents
1 × Camera
1 × Rotating base
1 × USB data cable
1 × Instruction manual
1 × Reset pin
2 × Magnetic sheets
Packaging
Individual package: 0.25 kg; 16.5 × 9.6 × 5.3 cm
Carton quantity: 48 units
Carton: 11.80 kg; 38 × 42 × 36 cm
Container loading: 20GP: 464 cartons × 48 units = 22,272 units; 40HQ: 1,077 cartons × 48 units = 51,696 units
General
Model
S1
Performance
Motion detection, Night Vision, Loop recording, Alarm Function
Memory
up to 64GB (not included)
System / Hardware
Image Sensor
CMOS
Lens
140 Degree View Angle
Media Format
Video Compression Format
H.264
Resolution
720P
Video Format
MP4
Night Vision
Configuration
8 infrared LEDs
Battery
Capacity
800mAh
Dimensions
Size
34x34x34mm
Weight
40g
Package Include
Package Contents
1 x Camera 1 x USB Cable 1 x Base 1 x User Manual
Package Weight
One Package Weight
0.25kgs / 0.54lb
One Package Size
16.5cm * 9.6cm * 5.3cm / 6.5inch * 3.78inch * 2.09inch
Qty per Carton
48
Carton Weight
11.80kgs / 26.01lb
Carton Size
38cm * 42cm * 36cm / 14.96inch * 16.54inch * 14.17inch
Loading Container
20GP: 464 cartons * 48 pcs = 22272 pcs40HQ: 1077 cartons * 48 pcs = 51696 pcs
Connect compatible antenna and coaxial cable setups with this 4-in-1 SMA to N RF coaxial connector adapter set. It gives you four connector combinations for short-distance connections across antenna, radio, Wi-Fi, telecom, CCTV, and other listed applications. Made from metal, each adapter has a simple, professional appearance that keeps cabling neat. The set supports equipment using SMA and N interfaces, helping you match different connector types in one practical pack.
Four connector combinations: SMA female to N female, SMA male to N female, SMA male to N male, and SMA female to N male.
Compatible applications: Suitable for antennas, broadcast, radios, Wi-Fi, telecom, coaxial cable, LMR, wireless LAN devices, CCTV, microwave applications, and digital communication systems.
Connection type: Intended for short-distance connections.
This adapter set is designed for connecting SMA and N interface equipment in antenna, wireless, radio, and communication setups. Specifications
Product type: SMA to N RF coaxial connector adapter set
Quantity: 4 connectors
Material: Metal
Package weight: 0.12 kg / 0.26 lb
Package size: 7 × 7 × 2.2 cm / 2.76 × 2.76 × 0.87 in
Packaging
Quantity per carton: 100 pieces
Carton weight: 11.80 kg / 26.01 lb
Carton size: 36 × 29 × 23 cm / 14.17 × 11.42 × 9.06 in
20GP loading: 1,110 cartons × 100 pieces = 111,000 pieces
40HQ loading: 2,578 cartons × 100 pieces = 257,800 pieces
Package Weight
One Package Weight
0.12kgs / 0.26lb
One Package Size
7cm * 7cm * 2.2cm / 2.76inch * 2.76inch * 0.87inch
Qty per Carton
100
Carton Weight
11.80kgs / 26.01lb
Carton Size
36cm * 29cm * 23cm / 14.17inch * 11.42inch * 9.06inch
Loading Container
20GP: 1110 cartons * 100 pcs = 111000 pcs40HQ: 2578 cartons * 100 pcs = 257800 pcs
Route power, video, audio, and data signals through UTP telephone wire with this 2 Pack Passive Video Balun. Each unit connects through RJ45 and BNC interfaces for real-time monochrome or color video transmission without amplification. Support for NTSC, PAL, and SECAM formats makes this balun suitable for systems using these video standards. Built-in transient suppression protection adds a stated layer of protection, while 60 dB crosstalk and noise immunity help manage signal interference.
Passive design: Transmits signals without amplification.
Easy installation: Compact housing and a 14 cm cable simplify setup.
Cost-efficient cabling: The product description states cable savings of 30%–50%.
Use the 2 Pack Passive Video Balun to route compatible video, power, audio, and data signals over UTP cabling. Specifications
Product type: Passive video balun for power, video, audio, and data
Quantity: 2 pack
Transmission medium: Unshielded twisted pair (UTP) telephone wire
Connectors: RJ45 and BNC
Video formats: NTSC, PAL, and SECAM
Video signal: Real-time monochrome or color video
Frequency response: DC–8 MHz
Attenuation: 0.5 dB typical
Impedance: BNC: 75 Ω; RJ45: 100 Ω
Crosstalk and noise immunity: 60 dB
Protection: Built-in transient suppression
Dimensions: 62 × 28 × 21 mm, with 14 cm cable
Working temperature: −10°C to +70°C
Storage temperature: −30°C to +70°C
Humidity: 0%–95%
Packaging
One package weight: 0.01 kg / 0.02 lb
Quantity per carton: 48
Carton weight: 5.30 kg / 11.68 lb
Carton size: 40 × 30 × 30 cm / 15.75 × 11.81 × 11.81 in
20GP loading: 740 cartons × 48 pieces = 35,520 pieces
40HQ loading: 1,719 cartons × 48 pieces = 82,512 pieces
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
48
Carton Weight
5.30kgs / 11.68lb
Carton Size
40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch
Loading Container
20GP: 740 cartons * 48 pcs = 35520 pcs40HQ: 1719 cartons * 48 pcs = 82512 pcs
Position your Arlo camera at the angle you need with this adjustable metal wall mount bracket. It supports a 360-degree swivel and 90-degree tilt, allowing flexible viewing when mounted on a wall or ceiling. The bracket is made from lightweight metal with oxidation resistance and supports waterproof use. It can also be mounted on a table, giving you more placement options for indoor or outdoor camera setups.
Adjustable viewing: Swivels 360 degrees and tilts 90 degrees.
Flexible mounting: Suitable for tables, ceilings, walls, and other mounting locations.
Camera compatibility: Designed mainly for Arlo and Arlo Pro cameras, plus other M6/6 mm compatible cameras.
Metal construction: Provides a lightweight bracket with an oxidation-resistant finish.
This camera mount is designed to help position compatible security cameras on a table, wall, or ceiling. Specifications
Product type: Adjustable security camera wall mount bracket
Material: Metal
Swivel: 360 degrees
Tilt: 90 degrees
Waterproof function: Supported
Screw type: M6/6 mm
Suitable cameras: Mainly Arlo and Arlo Pro cameras; other M6/6 mm compatible cameras
Mounting locations: Table, ceiling, wall, and other suitable locations
Use: Indoor and outdoor camera mounting
Packaging
One package weight: 0.20 kg / 0.44 lb
One package size: 58 × 15 × 13 cm / 22.83 × 5.91 × 5.12 in
Quantity per carton: 12 pieces
Carton weight: 3.00 kg / 6.61 lb
Carton size: 61 × 47 × 53 cm / 24.02 × 18.5 × 20.87 in
20GP loading: 175 cartons × 12 pieces = 2,100 pieces
40HQ loading: 407 cartons × 12 pieces = 4,884 pieces
Package Weight
One Package Weight
0.20kgs / 0.44lb
One Package Size
58cm * 15cm * 13cm / 22.83inch * 5.91inch * 5.12inch
Qty per Carton
12
Carton Weight
3.00kgs / 6.61lb
Carton Size
61cm * 47cm * 53cm / 24.02inch * 18.5inch * 20.87inch
Loading Container
20GP: 175 cartons * 12 pcs = 2100 pcs40HQ: 407 cartons * 12 pcs = 4884 pcs
Extend CCTV video signals over UTP CAT cable with the Active UTP Video Transmitter CM1001T. Its differential signal transmission provides 60 dB common-mode rejection for anti-jamming performance. The unit supports NTSC, PAL, and SECAM video systems. Use the CM1001T with an active transmitter for transmission distances up to 2,200 m. When paired with a passive transceiver, the supported distance is up to 1,200 m. The co-wire design shares a 12 V DC power supply with the camera, while the spring terminal allows cable installation without tools.
Protection: Built-in transient suppression protection.
Installation: Small design with tool-free spring-terminal cable connection.
Power: Operates on 12 V DC.
Use this video transmitter to connect compatible CCTV cameras over UTP CAT cable across extended distances. Specifications
Product: Active UTP Video Transmitter CM1001T
Transmission medium: UTP CAT cable
Maximum transmission distance: 2,200 m with an active transmitter
Transmission distance: 1,200 m when paired with a passive transceiver
Supported video systems: NTSC, PAL, and SECAM
Signal transmission: Differential signal
Common-mode rejection ratio: 60 dB
Power supply: 12 V DC
Power design: Co-wire design sharing DC 12 V power with the camera
Protection: Built-in transient suppression
Connection: Spring terminal
Working temperature: -15°C to -70°C
Packaging
Individual package weight: 0.01 kg / 0.02 lb
Quantity per carton: 140 pieces
Carton weight: 7.90 kg / 17.42 lb
Carton size: 50 × 35 × 35 cm / 19.69 × 13.78 × 13.78 in
20GP loading: 435 cartons × 140 pieces = 60,900 pieces
40HQ loading: 1,010 cartons × 140 pieces = 141,400 pieces
Package Weight
One Package Weight
0.01kgs / 0.02lb
Qty per Carton
140
Carton Weight
7.90kgs / 17.42lb
Carton Size
50cm * 35cm * 35cm / 19.69inch * 13.78inch * 13.78inch
Loading Container
20GP: 435 cartons * 140 pcs = 60900 pcs40HQ: 1010 cartons * 140 pcs = 141400 pcs
Keep watch over your outdoor space with the T13-2 1080P Solar WiFi Security Camera. It records in 1920 × 1080 resolution and connects through WiFi 802.11b/g/n. Motion detection, night vision, and two-way audio support everyday security monitoring. The fixed 3.6mm lens provides a 90-degree viewing angle. Two 850nm infrared lights offer night vision across 5–10 metres. With an IP66 waterproof rating and an operating temperature range of -20°C to 50°C, the camera is designed for outdoor installation.
Solar power: Includes a 3W solar panel.
Storage: Supports a TF card up to 128GB, not included.
Installation: Includes a screw set and screwdriver.
Use the T13-2 to monitor an outdoor area with WiFi-connected video, night vision, motion detection, and two-way audio. Specifications
Model: T13-2
Resolution: 1920 × 1080
Image sensor: 1/2.7-inch CMOS progressive scan sensor
Lens: Fixed 3.6mm
Viewing angle: 90 degrees
Video compression: H.264
Night vision: 2 × 850nm infrared LEDs; 5–10m distance
Wireless network: WiFi 802.11 b/g/n
Protocols: DDNS, UDP, SMTP, UPNP, DHCP, PPPOE, FTP, HTTP, TCP/IP
Memory: TF card up to 128GB, not included
Power depletion: 3W
Solar panel: 3W
Battery: 2 × 18650, 2200mAh; batteries not included
Ingress protection: IP66
Operating temperature: -20°C to 50°C
Dimensions: 22 × 9.2 × 6.5cm
Weight: 545g without battery
Package Contents
1 × Camera
1 × User manual
1 × Screw set
1 × Screwdriver
Packaging
Individual package: 25 × 15 × 12cm; 0.75kg
Carton quantity: 20 units
Carton size: 62 × 52 × 32cm
Carton weight: 15.50kg
20GP loading: 258 cartons × 20 units = 5,160 units
40HQ loading: 600 cartons × 20 units = 12,000 units
General
Model
T13-2
Power Depletion
3W
Performance
Motion detection, Night Vision, Two Way Audio
Memory
TF Card, up to 128GB (not included)
Network
Wireless
WiFi 802.11 b/g/n
Protocol
DDNS, UDP, SMTP, UPNP, DHCP, PPPOE, FTP, HTTP, TCP/IP
System / Hardware
Image Sensor
CMOS
Sensor Size
1/2.7 inch Progressive Scan
Lens
3.6mm, 90 Degree View Angle
Media Format
Video Compression Format
H.264
Resolution
1920*1080
Night Vision
Infrared Distance
5~10m
Configuration
2 infrared LEDs
Physical Environment
Ingress Protection
IP66
Operate Temperature
-20 to 50 Degree Celsius
Battery
Capacity
2200mAh
Dimensions
Size
22x9.2x6.5cm
Weight
545g
Package Include
Package Contents
1 x Camera 1 x User Manual 1 x Screws Set 1 x Screwdriver
Package Weight
One Package Weight
0.75kgs / 1.66lb
One Package Size
25cm * 15cm * 12cm / 9.84inch * 5.91inch * 4.72inch
Qty per Carton
20
Carton Weight
15.50kgs / 34.17lb
Carton Size
62cm * 52cm * 32cm / 24.41inch * 20.47inch * 12.6inch
Loading Container
20GP: 258 cartons * 20 pcs = 5160 pcs40HQ: 600 cartons * 20 pcs = 12000 pcs
Connect CCTV cameras to a DVR over CAT5 cable with this 2-pack of CCTV video baluns. Each O-611 206A balun converts the video connection between CAT5 cabling and BNC equipment without requiring power. The tool-less design installs in seconds, with no wire stripping needed. It supports NTSC, PAL, and SECAM video formats, while 60 dB crosstalk and noise immunity help maintain the video signal. Its compact 56 mm design fits neatly into a CCTV installation.
CAT5 to BNC connection: Connects compatible CCTV video equipment using CAT5 cable and BNC connections.
Video transmission: Full-motion CCTV video is supported up to 330 m when used with any passive transceiver.
Extended distance: The product details also list transmission up to 1,500 m with any passive transceiver.
Easy installation: Tool-less fitting requires no wire stripping.
Power-free operation: No power supply is required.
Specifications
Product type: CCTV video balun
Model: O-611 206A
Pack quantity: 2 baluns
Video formats: NTSC, PAL, and SECAM
Frequency response: DC to 8 MHz
Attenuation: 0.5 dB typical
Impedance: BNC: 75 ohms; terminal: 100 ohms
Crosstalk and noise immunity: 60 dB
Dimensions: 56 mm × 17 mm × 15 mm
Working temperature: −10°C to +70°C
Storage temperature: −30°C to +70°C
Humidity: 0–95%
Packaging
Package weight: 0.05 kg / 0.11 lb
Quantity per carton: 180 pieces
Carton weight: 8.10 kg / 17.86 lb
Carton size: 46 cm × 30 cm × 30 cm / 18.11 in × 11.81 in × 11.81 in
20GP loading: 644 cartons × 180 pieces = 115,920 pieces
40HQ loading: 1,495 cartons × 180 pieces = 269,100 pieces
Use this CCTV video balun pair to link compatible CAT5 cabling with BNC CCTV and DVR equipment.
Package Weight
One Package Weight
0.05kgs / 0.11lb
Qty per Carton
180
Carton Weight
8.10kgs / 17.86lb
Carton Size
46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch
Loading Container
20GP: 644 cartons * 180 pcs = 115920 pcs40HQ: 1495 cartons * 180 pcs = 269100 pcs
Monitor outdoor areas with the ESCAM QF103 3MP Solar WiFi PIR Security Camera. Its 2048 × 1536 resolution captures detailed video, while intelligent dual-light night vision supports infrared and white LED illumination up to 30 metres. The removable 3.5W solar panel charges the built-in battery, helping the camera remain ready with low power consumption. PIR human detection and AI humanoid detection work together for double-confirmation alerts. When movement is detected, the UBox app can push alarm information to your Android or iPhone. Built-in microphone and 3W speaker support two-way voice communication, while PTZ control lets you adjust the viewing direction remotely.
Outdoor protection: IP66-rated design for indoor or outdoor use.
Storage: Cloud storage for alarm recordings or a TF card up to 128GB.
Wireless access: Connect through WiFi using the UBox mobile app.
Specifications
Brand and model: ESCAM QF103
Resolution: 3MP, 2048 × 1536
Lens: 3.6mm focal length, 120° angle
Video compression: H.265
Detection: PIR human sensing and AI humanoid detection
Detection distance: 20m
Detection angle: 120°
Alarm method: Double-induction confirmation with mobile push notifications
PTZ range: Horizontal 355°, vertical 120°
PTZ speed: Horizontal 55°/second, vertical 40°/second
Night vision: Infrared and white LED illumination up to 30m
Audio: Built-in 3W speaker and microphone with 20m monitoring range
Power: Solar panel and two 18650 batteries, 2 × 2600mAh
Solar panel power: 3.5W
Maximum working power: 3W
Standby power: 0.003W
Operating temperature: -30°C to +60°C
Working humidity: 0%–90% RH
Memory: Cloud storage and TF card up to 128GB; card not included
Mobile access: Android and iPhone OS
Image flip: Horizontal and vertical
Package Contents
Solar panel × 1
WiFi camera × 1
Screw pack × 1
USB charging cable × 1
Manual × 1
Positioning paper × 1
Packaging
Individual package: 18 × 17 × 14cm; 0.88kg
Carton quantity: 12 units
Carton size: 36 × 36 × 40cm
Carton weight: 11.50kg
Container loading: 20GP: 514 cartons × 12 units = 6,168 units; 40HQ: 1,194 cartons × 12 units = 14,328 units
Use the ESCAM QF103 to monitor indoor or outdoor spaces with solar-assisted WiFi security coverage.
General
Power Depletion
3W
Performance
Motion detection, Night Vision, Alarm detection
Memory
up to 128GB (not included)
Function
PTZ, Motion Detect, Cloud storage
System / Hardware
Mobile Access
Android, iPhone OS
Pixels
3.0MP
Lens
3.6mm
Image Flip Function
Horizontal Flip, Vertical Flip
Pan/Tilt-Horizontal Angle
355 degrees
Pan/Tilt-Vertical Angle
120 degrees
Media Format
Video Compression Format
H.265
Resolution
2048*1536
Sub Stream
2048 x 1536
Night Vision
Infrared Distance
30m
NVR
Wireless Port
WiFi
Operation temperature
-30 to 60 Degree Celsius
Operation humidity
Less than 90 percent
Physical Environment
Environment
Outdoor
Operate Temperature
-30 to 60 Degree Celsius
Working Humidity
0 to 90 percent
Battery
Work Time
24 hours
Package Weight
One Package Weight
0.88kgs / 1.93lb
One Package Size
18cm * 17cm * 14cm / 7.09inch * 6.69inch * 5.51inch
Qty per Carton
12
Carton Weight
11.50kgs / 25.35lb
Carton Size
36cm * 36cm * 40cm / 14.17inch * 14.17inch * 15.75inch
Loading Container
20GP: 514 cartons * 12 pcs = 6168 pcs40HQ: 1194 cartons * 12 pcs = 14328 pcs
Keep CCTV video signals connected over twisted-pair cabling with this 2-pack of passive CCTV baluns. Each video transceiver converts between BNC and RJ45 connections for use with CCTV systems, without requiring a separate power supply. The balanced video transmission design helps resist interference from data signals, nearby video signals, power sources, ringing telephones, fluorescent lights, transformers, and other noise sources. It supports black-and-white video transmission up to 750 m and colour video transmission up to 600 m, with an 8 MHz frequency.
Broad compatibility: Suitable for all CCTV systems.
Connector impedance: RJ45 is 100 ohms and BNC is 75 ohms.
Compact format: Each transceiver measures 34 mm × 27 mm × 20 mm.
Use this passive CCTV balun set to transmit surveillance video through compatible twisted-pair cabling in CCTV installations. Specifications
Product type: Passive CCTV balun twisted-pair video transceiver
Pack quantity: 2
Application: All CCTV systems
Transmission distance: Black and white video up to 750 m; colour video up to 600 m
Frequency: 8 MHz
RJ45 impedance: 100 ohms
BNC impedance: 75 ohms
Dimensions: 34 mm × 27 mm × 20 mm
RJ45 patch: 4 (+), 5 (-) video; 3, 7 (+), 6, 8 (-) power
Packaging
One package weight: 0.10 kg / 0.22 lb
One package size: 17 cm × 10 cm × 3.6 cm / 6.69 in × 3.94 in × 1.42 in
Quantity per carton: 100 packages
Carton weight: 10.00 kg / 22.05 lb
Carton size: 52 cm × 35 cm × 36 cm / 20.47 in × 13.78 in × 14.17 in
20GP loading: 407 cartons × 100 pcs = 40,700 pcs
40HQ loading: 944 cartons × 100 pcs = 94,400 pcs
Package Weight
One Package Weight
0.10kgs / 0.22lb
One Package Size
17cm * 10cm * 3.6cm / 6.69inch * 3.94inch * 1.42inch
Qty per Carton
100
Carton Weight
10.00kgs / 22.05lb
Carton Size
52cm * 35cm * 36cm / 20.47inch * 13.78inch * 14.17inch
Loading Container
20GP: 407 cartons * 100 pcs = 40700 pcs40HQ: 944 cartons * 100 pcs = 94400 pcs
Mount your surveillance cameras securely with this 3-pack of Hikvision aluminum mounting brackets. Each wall-mounted bracket has a thick base for stable installation and a smooth, neat surface suitable for outdoor use. The aluminum alloy construction provides strong load-bearing capacity. Loosen the screw to adjust the bracket’s rotation angle and direction during installation. The internal hidden wire design allows cables to pass through the alignment while helping protect the routing.
Flexible positioning: Adjust the rotation angle and direction by loosening the screw.
Concealed wiring: Internal cable routing keeps wires within the bracket.
Outdoor suitability: The smooth surface is not easy to corrode from rain.
Stable mounting: A thick base supports wall installation.
Pack quantity: Includes three surveillance camera mounting brackets.
This Hikvision bracket set is designed for wall-mounted surveillance camera installation. Specifications
Product type: Security camera aluminum mounting bracket
Brand: Hikvision
Quantity: 3 brackets
Material: Aluminum alloy
Installation method: Wall mounted
Dimensions: 186 × 94 × 65 mm
Application: Various surveillance installations
Wire design: Internal hidden wire routing
Packaging
One package weight: 0.45 kg / 1.00 lb
One package size: 19 × 10 × 21 cm / 7.48 × 3.94 × 8.27 in
Quantity per carton: 10 packages
Carton weight: 5.50 kg / 12.13 lb
Carton size: 52 × 41 × 24 cm / 20.47 × 16.14 × 9.45 in
20GP loading: 521 cartons × 10 pcs = 5,210 pcs
40HQ loading: 1,209 cartons × 10 pcs = 12,090 pcs
Package Weight
One Package Weight
0.45kgs / 1.00lb
One Package Size
19cm * 10cm * 21cm / 7.48inch * 3.94inch * 8.27inch
Qty per Carton
10
Carton Weight
5.50kgs / 12.13lb
Carton Size
52cm * 41cm * 24cm / 20.47inch * 16.14inch * 9.45inch
Loading Container
20GP: 521 cartons * 10 pcs = 5210 pcs40HQ: 1209 cartons * 10 pcs = 12090 pcs
