This car rearview mirror is designed to assist with blind spot visibility, available in black, white, or silver options. Made from durable ABS material, it attaches to your vehicle's rearview mirror for enhanced road awareness. In everyday driving, it helps monitor blind spots during lane changes or reversing, reducing the risk of accidents by providing a clearer view of surrounding traffic without needing to adjust your position. High-definition glass offers a comprehensive field of vision for better observation of road conditions ahead and behind. 360-degree rotation allows for adjustable angles to suit different driving scenarios. AF technology on the mirror surface improves clarity in rainy weather, minimizing distortion. Easy installation with included tools, securing firmly to most exterior mirrors in seconds. Features an anti-collision frame to protect the glass from damage during use. Weighs 360 grams for a lightweight, non-obstructive addition to your car. This mirror fits standard vehicle exterior mirrors, making it a practical choice for drivers seeking improved safety on daily commutes or long trips.

Read more less

This Car Rearview Mirror LED Turn Signal Streamer is a pair of slim, attach-to-mirror lighting strips designed to enhance turn signal visibility for daytime and adverse weather conditions. It operates from a 12V automotive electrical system with a total power draw of 12W. The strips are bendable to fit multiple mirror shapes and installation positions. Use on the outer edge of the rearview mirror for additional signaling that stays within the driver's line of sight. The LEDs remain bright in rain, at night, and in fog, helping other drivers notice your intentions. Power: 12V DC, total consumption 12W Flexible, bendable design to fit multiple mirror shapes and angles Wiring: White to steering input, Black to ground, Red to power Dimensions: 15x1 cm and 19x1 cm LED beads with steady color rendering and long life Specifications: Input voltage 12V, power 12W, dimensions 15x1 cm and 19x1 cm. Installation location: rearview mirror. Fit: Suitable for most vehicles with standard rearview mirror mounting and a 12V electrical system.

Read more less

The Car Rearview Mirror Phone Holder for Hands-Free Navigation is designed to hold a device up to 7 inches securely in your line of sight. Its 360-degree spherical shaft lets you rotate the screen to the perfect angle, while the 180-degree clamp arm adapts to near or far positions. Compatible with devices up to 7 inches 360° rotating spherical shaft for flexible viewing angles 180° clamp arm adjusts to near or far positions Thick sponge padding protects your phone from scratches Four adjustable buckles fit rearview mirrors of various sizes Weight 165 g for balanced mounting on most car mirrors Key specs: Supports devices up to 7 inches; 360° rotation; 180° clamp; soft padding. Fit: Four buckles adjust to different rearview mirror heights and widths, enabling a secure fit across many vehicle models.

Read more less

This Car Rearview Mirror Protective Film provides a clear, weather-resistant layer for your rearview mirrors. Made with a PET base and nano coating, it offers high transmittance and practical protection for daily driving. Ideal for drivers in rain, fog, or dusty conditions where visibility matters. It shields the mirror surface, reducing smudges and scratches while preserving a clear view. Material and coating: PET base with nano coating for high transmittance Optical performance: anti-fog, anti-glare, and anti-mist properties Weather resistance: waterproof and rainproof to preserve visibility Surface protection: guards against scratches, smears, dust and dirt Installation: simple, tool-free application with a wet-mount method and scraper Durability and weight: lightweight, durable film that stays in place Appearance: transparent finish that preserves the mirror’s original look Lightweight and transparent by design, the film adds minimal bulk and stays securely in place during driving in rain or sun. Fit: designed to fit standard car rearview mirrors. Check your mirror size before installation.

Read more less

Car rearview mirror rainproof blades provide a practical solution for maintaining clear visibility during drives in various weather conditions. In rainy weather, these blades help shield the mirror from water droplets, allowing drivers to observe rear road conditions more effectively and reduce potential hazards. They also assist in minimizing dust accumulation on sunny days for consistent performance. Made from translucent PVC material, ensuring they blend with any mirror color without obstructing view. Include two pieces with self-adhesive backing for straightforward installation on both sides of the rearview mirror. Flexible design that bends to accommodate mirrors approximately 18cm wide, adapting to a range of vehicle models. Easy to apply and remove, promoting hassle-free maintenance. Help in keeping the mirror surface cleaner, supporting better overall driving safety. Compact size makes them a convenient addition to most cars without altering the mirror's appearance. These blades fit securely on rearview mirrors around 18cm, making them suitable for everyday use in diverse driving environments.

Read more less

Car reflective safety stickers enhance vehicle visibility during low-light conditions, available in red, yellow, blue, and green colors. Made from durable PET material, these stickers help alert other drivers and reduce accident risks. In everyday scenarios, such as nighttime driving or poorly lit roads, these stickers can be placed on car wheel rims, door edges, or other visible areas to improve safety and awareness for all road users. Reflects light in the dark to provide warnings and reminders Versatile attachment to various car surfaces for customized placement Multiple color options for better visibility and personalization Constructed from PET for resistance to weather and wear Includes 20 stickers per package for multiple applications Compact size suitable for tight spaces on vehicles These stickers fit well for car owners seeking practical ways to boost road safety, especially in urban or rural driving environments.

Read more less

The Car Refrigerator Power Cord 12/24V With Switch 1m provides a dedicated inline power connection for automotive and 12/24V appliances. Use it to power car refrigerators, portable coolers, or other 12/24V devices when you’re on the road or in a parked setup. Pure copper wire core delivers low resistance and reliable conduction. Universal 12/24V input supports 1–10A current for compatible devices. Inline switch offers quick, convenient control without unplugging. Built-in fuse in the plug protects against overload and overcurrent. PVC outer jacket with durable edge insulation resists wear in vehicle environments. Cable lengths available approximately 1m, 2m, 4m, or 5m to fit different setups. Connector type uses an automotive standard plug compatible with 12/24V sockets. Optional light specifications: color black; jacket material PVC; temperature rating -20°C to +60°C. Fit: compatible with most 12/24V vehicle outlets and common 12/24V appliances, providing a practical power link for mobile use.

Read more less

This car refrigerator power cord is designed to power portable fridges from vehicle outlets. It features fuse protection and thick copper conductors for reliable in-vehicle operation. Use it on road trips, camping, or any scenario where a portable fridge needs a stable 12V or 24V supply from a car, SUV, or truck. 10A rated current with 12V/24V compatibility 1.31 mm2 pure copper wire for low resistance Aluminum alloy solid contact head with copper contacts PVC injection-molded insulation for durability and safety Thick wires for flexible routing and long-term use B-type connector interfaces suitable for 12V/24V fridge inlets Specifications: Current 10A; Voltage 12V/24V; Wire: 1.31 mm2 copper; Insulation: PVC; Connector: B-type. Fit: Compatible with car refrigerators that use a B-shaped 12V/24V input. Note: If the refrigerator interface is 12V-only (B-shaped), a separate 220V to 12V converter may be required.

Read more less

This Car Remote Control Universal Visible Zipper Key Case in Royal Blue offers a dedicated home for your car keys while keeping them protected and easy to access. The exterior is cowhide with a synthetic leather lining for a refined, durable finish. Use it daily to clip or hang from a belt loop, bag strap, or car interior thanks to the 360-degree swivel design. The removable keychain lets you detach keys for quick access without removing the entire case. It shields keys from scratches and daily wear. Exterior: cowhide leather with synthetic lining for durability Thickened design provides protection against scratches and minor drops 360-degree swivel and belt/bag hanging capability Removable keychain for easy key separation and access Compact, dedicated compartments keep keys organized Size 9 x 5.5 x 2 cm; fits most car keys Fit: Designed to fit most car keys.

Read more less

This 415-piece Car Retainer Clips Kit provides a versatile plastic clip assortment for automotive trim work. It covers a wide range of sizes and shapes to replace clips during panel removal. Designed to remove door panels and upholstery clips without damage, it supports trim panels, door trims, bumpers, fenders, engine covers, and splash shields. 415-piece assortment with multiple sizes and clip shapes Durable plastic construction resists vibration and cracking Easy to insert and remove without harming panels or clips Broad compatibility for Honda, Toyota, Mazda, Isuzu, and GM vehicles Works for trim panels, door panels, bumpers, fenders, engine covers, and splash shields Specifications: Plastic kit; 415 pieces; color not specified; compatible with a wide range of models. Fit: Verify clip shapes match your vehicle’s originals before replacement.

Read more less

Car Retainer Clips Remover Kit — a 680-piece set designed for interior trim work. Made from eco-friendly plastic, it is durable for replacing worn or broken fasteners. Ideal for removing door panels, dashboards, liners, and bumpers on a wide range of vehicles without damaging adjacent parts. 680-piece assortment of clips and removal tools Universal compatibility with a broad range of car models Eco-friendly plastic construction designed for repeated use Suitable for interiors, liners, bumpers, and trim panels Lightweight kit with a total weight of about 900 g and compact footprint (roughly 17 x 17 x 18 cm) Replaces worn or missing retainers and supports safe reassembly Specifications: Weight ~900 g; overall size ~17 x 17 x 18 cm. Fit: Compatible with most passenger cars' interior trim clips; check your vehicle's trim fasteners before use.

Read more less

The Car Retainer Clips Set is a 292-piece assortment of plastic fasteners designed to replace worn trim and engine bay retainers. Use these push clips to replace trim panel clips, door clips, bumper clips, fender retainers, engine covers, and splash shields. They let you remove door panels and upholstery clips quickly and with less risk of damage. 292 pieces in assorted sizes and clip types to fit a wide range of interior and exterior panels. Durable plastic construction resists vibration and cracking for long-term use. Easy to install and remove, reducing the likelihood of panel damage during service. Covers trim panels, door panels, bumpers, fenders, engine covers, and splash shields. Compatible with Honda, Toyota, Mazda, Isuzu, and General Motors vehicles. Specifications: Material — plastic; Pieces — 292; Includes assorted sizes. Fit: Designed for a broad range of vehicles; verify the clip size against the OEM part before replacing to ensure a proper fit.

Read more less

This car reversing camera extension cable delivers a 15-meter, plug-and-play link between your rearview camera and monitor, helping you extend wiring without splicing. Use it when the camera is mounted far from the monitor or needs routing under doors or along the floor, providing a reliable 4-pin connection for standard automotive camera systems. Length: 15 meters; provides ample reach from rear camera to monitor. Connector: 4-pin design aligns with standard automotive cameras for reliable signal and ground. Construction: corrosion- and wear-resistant jacket withstands frequent mounting and outdoor exposure. Installation: plug-and-play, no soldering or tools required for typical car installations. Compatibility: works with most 4-pin rearview cameras and monitors found in aftermarket kits. Light specifications: 4-pin interface, 15 m extension, suitable for routing along vehicle panels. Fit: Designed to fit standard 4-pin automotive camera systems in passenger cars, SUVs, and trucks.

Read more less

The Car Reversing Camera Extension Cord extends your rearview camera setup with a 5.5-meter cable. It features a 5-pin connector and a durable, wear-resistant construction. Designed for long-term use in vehicles, it offers stable signaling and reliable performance. Ideal when your camera sits farther from the head unit or needs routing through trunk or bumper areas. Its flexible routing supports installations behind bumpers, through wheel wells, or along door sills. 5-pin connector compatible with most car rearview cameras 5.5 m cable length for versatile routing Durable jacket and corrosion-resistant contacts Plug-and-play installation for quick setup Suitable for interior or exterior routing in many vehicles Specifications: Pin count 5, Cable length 5.5 m. Fit: Works with standard 5-pin rearview camera connections and commonly used displays.

Read more less

This Car Reversing Radar Sensor is a dedicated rear parking aid for BMW 5 Series, specifically the E60/E61 (pre-facelift) models built 2003–2007. Use it to help detect obstacles when reversing in tight spaces, garages, or crowded parking lots, aiding safer maneuvering. Material: ABS plastic for durable, impact-resistant construction. OE compatibility: 662069891744; fits BMW 5 Series E60/E61 (Vorfacelift), 2003–2007. Compact dimensions: 8 x 5 x 3.5 cm and 40 g weight keep a discreet bumper profile. Direct replacement for the original rear bumper sensor in the specified mounting hole and connector location. Designed to work with the standard BMW wiring for this sensor, minimizing compatibility issues. Specifications: Material: ABS plastic; Weight: 40 g; Size: 8x5x3.5 cm; OE: 662069891744. Fit: BMW 5 Series E60/E61 (Vorfacelift), 2003–2007.

Read more less

Car RGB LED Rear Light Strip provides color-changing rear illumination for daytime visibility and clear signaling. It combines RGB lighting with practical modes to support safe, everyday driving. Designed for rear mounting on cars, trucks, or SUVs, it helps other drivers notice your vehicle in daylight and communicates turns, braking, or hazards with clear patterns. 5‑in‑1 functionality: driving, turn signal, double flash, and sequential start scan. RGB color with multiple modes for signaling and ambient styling. Flexible, cut-to-fit strip that can bend around contours. IP68 waterproof with a heat-resistant silicone tube for harsh conditions. Low power consumption: 10W at 12–24V, with 5050 LED beads. Easy installation for DIY mounting on flat or curved rear surfaces. Specifications: Voltage 12V–24V; Power 10W; LED beads 5050; Color RGB; Material silicone tube; IP68 rating. Fit: Works with most 12–24V vehicles; can be cut to fit rear edges and wrap around contours.

Read more less

This car roof antenna mast offers a simple way to add a touch of style to your vehicle's exterior. Designed for aesthetic enhancement, it mimics a traditional antenna while providing no actual signal capabilities. For car owners wanting to refresh their ride's look without permanent changes, this mast attaches easily via adhesive to the roof or trunk, making it suitable for daily drivers or customizers seeking subtle upgrades. Made from durable aluminum alloy and ABS materials that resist fading and withstand various weather conditions. Compact size of 17x1.5cm with a 6x4.4cm base, ensuring a low-profile fit. Adhesive backing for straightforward, tool-free installation on most flat surfaces. Lightweight construction to avoid adding extra weight or stress to your vehicle. Purely decorative, focusing on visual appeal without interfering with existing car systems. It's a practical choice for enhancing vehicle aesthetics on sedans, SUVs, or trucks with compatible mounting areas.

Read more less

This car roof antenna mast is designed as a decorative accessory to enhance your vehicle's exterior appearance. Made from aluminum alloy and ABS materials, it offers a simple way to add a classic touch without any functional modifications. For car owners looking to update their ride's style, this mast sticks easily onto the roof or trunk using its adhesive backing. It's a straightforward solution for achieving a more polished look, especially on modern cars that lack traditional antennas, while maintaining a clean and unobtrusive profile. Constructed from durable aluminum alloy and ABS for resistance to fading and breaking Compact size: 11.6cm length and 1.3cm width, with a 7cm x 5cm base for versatile placement Simple adhesive application that works on most car surfaces, no tools required Weather-resistant design to handle various conditions without deteriorating Purely decorative, providing aesthetic appeal without altering vehicle performance This accessory fits standard vehicles and suits those seeking an easy, non-permanent way to personalize their car's exterior.

Read more less

This Car Rotating Folding Vacuum Suction Cup Magnetic Phone Holder provides a stable, hands-free mount for on-the-road use. Designed for daily driving tasks, it supports navigation, calls, and music control, with reliable adhesion on windshields or smooth dashboards for reuse across surfaces. Material and magnets: zinc alloy + ABS; built-in N55 magnet for stability. Vacuum cup: nano-washable, double-secure adsorption; reusable on many surfaces. Rotation and fold: 360° base with damped folding magnetic head. One-button operation: instant rotation, one-second fold; biomimetic octopus suction using vacuum atmospheric pressure. Extreme-temp performance: tested -33°C to 85°C; no fall-off, quiet operation. Weight and size: 83 g; 60 × 42 × 130 mm. Specifications: Material: zinc alloy + ABS + magnets; Weight: 83 g; Size: 60 x 42 x 130 mm. Fit: Compatible with most smartphones when used with the magnetic head; verify with any protective case and device thickness.

Read more less

The Car Round Button Push Switch with Red LED Indicator is a compact on/off control for automotive DIY projects. It features a red LED indicator to show when the circuit is active. Common uses include adding an accessory switch to dashboards, controlling auxiliary lights, or powering small devices in a custom installation. 40 mm diameter round push button; 18 mm depth On/off push action for simple operation Voltage rating AC 220–250 V; current 5 A Red LED indicator lights when the switch is ON Lightweight and compact at about 15 g Panel-mount design for standard 40 mm round openings Light specifications: Red LED indicator; designed to operate within the stated voltage/current ratings. Fits standard 40 mm round panel openings and dashboards for DIY installations.

Read more less

This car round dome reading light provides focused interior illumination for nighttime reading in your vehicle. It features a simple design and easy installation, with a compact size that fits standard dome light spaces. The unit is designed to minimize heat output and supports energy-efficient use. Designed for drivers and passengers who need a reliable reading light without distracting glare. It offers steady brightness while keeping heat low, supporting longer use during road trips or parked moments. Simple design and easy installation Reduces heat generation for longer life Low power consumption for energy efficiency Shock resistant with stable brightness Compact size: 100 x 100 x 20 mm Fit: designed for round dome light fixtures in car interiors; fits most standard dome light housings in cars.

Read more less

These Car Rubber Cushion Pipe Clamps secure hoses, cables, and small pipes with a 1-inch opening. The stainless steel body paired with a rubber cushion protects routed lines in tight spaces. Ideal for automotive, marine, UTV, industrial, and household installations where exposure to salt, water, oil, and vibration is common. Opening size 1 inch (25 mm) fits standard hoses, cables, and pipes 304 stainless steel frame with a rubber cushion cushions content and reduces wear Resistant to salt, oxidation, water, and oil for exposed environments Rotates and bends during installation for flexible mounting in tight spaces Pack includes 10 clamps for multiple projects and quick replacements Compatible with hoses, steel pipes, and cables up to 1 inch Specifications: Size 1 inch (25 mm); Material: 304 stainless steel with rubber cushion; Quantity: 10. Fit: Suitable for hoses, cables, and small pipes with a 1 inch diameter in automotive, marine, UTV, industrial, and household installations.

Read more less

Car Rubber Cushion Pipe Clamps, 28 mm, pack of 10, for automotive use. Made with 304 stainless steel and a rubber cushion, these clamps secure hoses, pipes, and cables while dampening vibration. They resist salt, oxidation, water, and oil exposure, making them suitable for automotive, marine, UTV, industrial, and household installations. Size and material: 28 mm inner diameter; 304 stainless steel body with a rubber cushion Pack quantity: 10 clamps per pack Compatibility: hoses, steel pipes, and cables Installation: simple, adjustable; rotates and bends to fit curved routes Durability: resistant to salt, oxidation, water, and oil in automotive, marine, UTV, and industrial environments Specifications: Inner diameter 28 mm; pack of 10; material 304 stainless steel with rubber cushion. Fit: designed to accommodate hoses, pipes, and cables with an approximate 28 mm diameter.

Read more less

This 10-pack Car Rubber Cushion Pipe Clamps offers a practical, no-nonsense solution for securing hoses, cables, and small pipes with a 38 mm diameter. Built for automotive, marine, UTV, and workshop projects, these clamps protect routed lines from abrasion while reducing vibration thanks to the rubber cushion. 38 mm (1.5 in) clamp size; compatible with hoses, cables, and small pipes. Materials: 304 stainless steel body with a rubber cushion for surface protection. Corrosion and chemical resistance: handles salt, water, oil exposure and oxidation. Easy installation: simple to install and can be rotated or bent during placement. Pack contents: 10 clamps per pack. Applications: automotive, marine, industrial, household wiring, and pipe routing. Specifications: 38 mm diameter (about 1.5 in); 304 stainless steel with rubber cushion; quantity 10; fits hoses, pipes, and cables. Fit: Suitable for hoses, steel pipes, and cables up to 38 mm in diameter, for automotive, marine, and general-purpose installations.

Read more less