Products

This Ford LED Dynamic Turn Signal Light 2-Pack is designed to replace original indicators on select Ford models. The kit provides durable, weather-ready LED signaling for daily driving. Use these lights to upgrade visibility and signaling without altering your vehicle’s exterior lines. Material: ABS housing and lens for durable, weather-resistant use Lighting: Dynamic LED turn signals with sequential illumination Durability: Resistant to high and low temperatures and general wear Waterproof: Constructed to withstand outdoor exposure for longer life Compatibility: Ford Focus Mk2 (02/2008–12/2010), Focus Mk3 (12/2010–04/2018), Mondeo Mk4 (12/2010–08/2014) Installation: Easy to install with existing mounting points Light specifications: LED dynamic signals, included in a 2-pack, housed in ABS construction. Fit: Direct replacement for the listed Ford models, designed for straightforward swap-in.

Read more less

The Ford Left-Hand Drive Car Phone Holder for Dash Navigation is a compact, clip-on mount designed for Ford dashboards. Made from plastic, it installs quickly without obstructing controls or airflow. Use it to keep your phone within easy reach for navigation, calls, or music control while driving. The mount sits on the dashboard or can clip to an air vent, keeping the screen visible without blocking view or vents. Mini size that fits unobtrusively on the dashboard or air outlet Clip-on installation for quick setup on the dashboard or air vent One-piece base provides stable mounting with minimal wobble 360-degree rotation with a ball head about 16.72 mm for flexible viewing angles Lightweight plastic construction for easy repositioning Designed to use with the original car slot; does not block blinds or airflow; base included, bracket required Fit: Base included; requires the bracket to complete the phone holder. Mounts on the dashboard or air outlet in Ford left-hand drive vehicles.

Read more less

Replace a worn or damaged interior door handle with this Ford Ranger Door Inner Handle Pair. Made from durable plastic with an electroplated finish for a clean, low-maintenance appearance. This pair is a practical solution when the original inner handles break, wear out, or become difficult to operate. It installs in the inner door handle location to restore smooth, reliable operation during daily use. Direct replacement for damaged or worn inner door handles Durable plastic with an electroplated finish for corrosion resistance and easy cleaning OE references AB3921971AB, AB3921970AB for compatibility verification Fits Mazda BT-50 (2012–2019), Ford Ranger T6 (2012–2019), and Ford Everest (2015–2019) Includes a pair to cover both doors for simple installation Light specifications: Material – plastic; Finish – electroplating. Fit: Designed to mount in the inner door handle location on Ford Ranger T6 2012–2019, Mazda BT-50 2012–2019, and Ford Everest 2015–2019; OE numbers AB3921971AB and AB3921970AB.

Read more less

The Ford Silicone Dustproof Shift Knob Cover is a flexible, durable sleeve designed to protect your gear shift from dust and wear. Made from high-resilience silicone, it offers a soft touch, easy handling, and reliable reuse for everyday driving. High-resilience silicone delivers bendable flexibility, elastic rebound, a soft touch, and durable wear resistance. Odor-free silicone stays neutral in air and feels comfortable during regular use. Washable and reusable; easy to clean with soap and water, reducing waste over time. Size 5.5 x 6 x 4.7 cm; designed for standard cylindrical shift knobs (verify fit with your model). Provides a comfortable grip with a smooth, tactile surface for daily driving. Specifications: Material: silicone; Size: 5.5 x 6 x 4.7 cm. Fit: designed to fit most standard shift knobs with typical dimensions; check your knob size before installation.

Read more less

The Ford Tailgate Lock Actuator is a replacement part designed for Ford Fusion and Fiesta models. Use this actuator to restore reliable tailgate locking when the original unit fails, sticks, or is noisy. Made from durable plastic and metal for light weight and enduring use OE-style design follows original specifications for compatibility Fits Ford Fusion (2002–2012) and Ford Fiesta Mk5/MK6 (2002–2008) Easy to install with standard mounting points and connectors Reference OE numbers: 2S6T432A98AF and 1481081 (verify against your vehicle) Stable operation and reliable engagement for daily use Specifications: Material blends plastic and metal for balanced durability and light weight; OE references 2S6T432A98AF and 1481081. Fit: Ford Fusion 2002–2012; Ford Fiesta Mk5/MK6 2002–2008. It is suitable for DIY replacement or professional service, helping restore trunk closure reliability.

Read more less

This rear view backup camera is tailored for Ford Taurus vehicles, offering practical assistance for everyday parking maneuvers. For drivers navigating tight spaces or low-light conditions, this camera provides a reliable way to monitor the area behind your vehicle, helping to enhance awareness and reduce the risk of collisions during reverse. Adjustable angle for customized viewing to suit different driving needs Wide-angle lens that covers a broad rear area for comprehensive visibility Clear image resolution of 480 x 600 pixels to display details accurately Effective night vision capabilities for better performance in dim lighting Straightforward installation process that minimizes setup time and effort Lightweight design at approximately 100g for easy integration This camera fits specifically with Ford Taurus models, making it a straightforward choice for owners seeking improved rear visibility.

Read more less

This reversing assist camera is designed for Ford Transit vehicles, offering a practical solution for improved rear visibility during maneuvers. In everyday driving, it helps drivers navigate tight parking spaces or reverse in low-light conditions by providing a clear view of the area behind the vehicle, reducing the risk of accidents. Adjustable angle allows customization to match specific driving needs for better accuracy. Wide-angle lens covers a broad rear area, ensuring comprehensive visibility. High-resolution imaging at 480x600 pixels delivers clear footage for reliable guidance. Enhanced night vision capability maintains visibility in dim lighting. Simple installation process minimizes setup time and effort. Compatible with Ford Transit models, using OE part CJ5T-19G490-AB for a seamless fit. This camera suits Ford Transit owners seeking dependable rear-view assistance for safer reversing in various environments.

Read more less

This ABS window crank handle replacement is designed for Ford vans and cars with manual windows. It provides a straightforward installation and durable operation for a damaged or worn handle. Use-case: When the existing window crank is cracked, loose, or no longer engages properly, this replacement restores manual window operation on a range of Ford models, including Transit variants and Focus from the late 1990s to early 2010s. Please confirm compatibility with OE numbers 1041708 or 6725906 before purchase. Material: ABS, durable and resistant to everyday wear OE compatibility: 1041708 and 6725906 for model verification Comprehensive fitment: Ford Transit, Transit Connect 2002–2013, MK5–MK7, Escort 1990–2001, Fiesta 1995–2002, KA 1996–2008, Puma 1997–2001, Street KA 2003–2005, Focus MK1–MK2 1998–2011 Easy installation: simple swap with common hand tools Purpose-built replacement: replaces a damaged or worn window regulator handle Light specifications: ABS construction helps keep weight low while maintaining durability. Fit: Verify the OE number matches your vehicle before purchasing; designed for the listed Ford Transit, Focus, Escort, Fiesta, KA, Puma, and Street KA models.

Read more less

This silicone key protector set is designed for Ford Transit and Ford Focus key fobs, supplied as a 2-pack for everyday use. Keep your keys protected from scratches, dirt, and general wear while preserving easy access to buttons and responsiveness during daily carry. Material: Silicone offers a soft touch and durable protection Compatibility: Fits Ford Transit and Ford Focus key fobs Protection: Guards against scratches, dirt, tears, and wear Design: Fit-button design allows quick installation and removal Water resistance: Waterproof and easy to wipe clean Lightweight: Approximately 12.5 g per protector; 2-pack Specifications: Material: silicone; Weight: ~12.5 g per protector; Includes: 2-pack; Color: not specified; Waterproof and durable. Fit: Designed to snugly fit Ford Transit and Ford Focus key fobs; easy to install and remove for routine maintenance or replacement.

Read more less

This Ford vehicle diagnostic tool helps with everyday car maintenance by providing access to key vehicle data and functions. It's designed for straightforward use, allowing you to identify and address common issues without professional help. In daily scenarios, such as when a warning light appears on your dashboard, this tool lets you read fault codes to pinpoint problems like engine errors or sensor failures, enabling quick checks and potential fixes at home or on the road. Reads and clears fault codes for accurate diagnostics Monitors real-time data streams to track vehicle performance Supports module reset and reprogramming for components like ECU and TCM Allows data recording for later analysis of driving patterns Facilitates online updates to maintain compatibility with various Ford models Light on specifications, it works with USB connections and includes software for easy operation. This tool fits well for Ford owners who handle routine maintenance and seek a practical way to extend their vehicle's lifespan.

Read more less

The Forefoot Pad for High Heels is a compact, moisture-wicking insole designed for everyday wear. Slip this pad into most high-heeled shoes to minimize forefoot sliding, wick away moisture, and soften foot pressure during long days. Material: GEL JP velvet, providing gentle cushion. Design/Color: printing pattern adds a subtle decorative touch. Function: absorbent and wicking insole helps keep feet dry. Size & weight: Free size (7x9.8x0.25 cm); weighs 30 g. Suitable shoe type: compatible with most high-heeled and dress shoes. Seasons: suitable for all year round, including spring, summer, autumn, and winter. Lightweight specs: 30 g, 0.25 cm thick, designed to minimize bulk. Fit: Designed for the forefoot area in most heels, offering a discreet, secure feel.

Read more less

The FOREV Ergonomic Silent Wireless Mouse is designed for comfortable, everyday computer use, featuring a layout that supports natural hand positioning to minimize fatigue during extended sessions. For users who work on desktops or laptops for hours, this mouse provides a quiet operation that reduces click noise in shared spaces, making it suitable for offices, home setups, or remote work. It handles tasks like document editing, web browsing, and basic graphic design with reliable performance. Ergonomic shape with skin-friendly, non-slip surface for a secure, sweat-proof grip. 2.4G wireless connection for stable transmission up to 10 meters. Three DPI settings (800, 1200, 1600) adjustable via buttons for precision in various activities. Silent clicking mechanism to maintain a quiet environment. Powered by a single AA battery (not included) for convenient, long-lasting use. Compact design that fits most hand sizes for versatile daily computing. This mouse is a practical choice for individuals seeking an affordable, user-friendly option that enhances productivity without unnecessary complexity.

Read more less

4-Inch Forklift LED Front Working Headlight designed for nighttime operation. This compact light (136x108x35mm) uses a sturdy aluminum shell and clear acrylic optics to provide dependable front illumination. Ideal for forklifts, excavators, and other light industrial equipment that require direct replacement lighting wired to the original harness. Light options: 27W or 48W, delivering about 1380 lm or 2400 lm Color temperature: 6000–6500K for daylight-like visibility IP65-rated protection; one-piece aluminum shell with reinforced base DC 12–80V wide voltage input; compatible with 12/24/36/48/60/72V systems M10 mounting bracket included for straightforward installation Acrylic cover with a large optical lens for clear, broad light output Efficient heat management: butterfly heatsink and high-conductivity copper core wiring Specifications (optional): Size 136x108x35mm; Voltage DC 12–80V; IP65 waterproof; M10 bracket mounting. Fit: Designed for 4-inch front headlight openings on forklifts, compact loaders, and similar machines that use an M10 mounting bracket.

Read more less

The Forklift-Shaped Charger offers a practical solution for wireless charging on your desk. This stand-shaped device allows you to power up your daily essentials without the hassle of multiple cords. In a typical workday, place your phone, headphones, and smartwatch on the charger to keep them ready while you focus on tasks, helping maintain a tidy and efficient workspace without interrupting your routine. Supports simultaneous charging for phones, earbuds, and watches with dual coil technology for horizontal or vertical positioning. Features an intelligent system that adapts power output and includes safety protections like overcharge and overheating prevention. Incorporates a unique forklift design with anti-skid elements for stable, secure use. Equipped with sensitive induction up to 5mm, so you can charge devices without removing cases. Includes adjustable taillights for subtle visibility without glare. Light specs: Measures about 155 x 126 x 75mm and outputs up to 15W. This charger suits anyone with a busy desk setup needing reliable, multi-device convenience.

Read more less

Four Butterflies Embossing Die is a carbon steel craft tool designed for scrapbooking and paper arts. Measuring 120 x 97 mm and weighing about 10 g, it blends handmade work with semi-mechanical precision to deliver consistent embossed butterflies. Use it to create delicate butterfly motifs on cards, albums, and gift tags. Compatible with most die-cutting machines, it fits into standard platforms and routines found in home studios and classrooms. Material: carbon steel Design: four butterfly motifs for decorative embossing Size: 120 x 97 mm Weight: about 10 g Craft: handmade with semi-manual and semi-mechanical production Compatibility: suitable for most brands of die-cutting machines Packaging: individually packed in a PP bag Specifications: Material – carbon steel; Dimensions – 120 x 97 mm; Weight – approx. 10 g; Packing – PP bag. Fit: Works with most brands of die-cutting machines; use with appropriate mats and platforms for clean impressions.

Read more less

This four-gram threaded copper bullet sinker is designed for reliable depth control on fishing lines. Its compact, cylindrical bullet shape and threaded construction let you attach it quickly and securely. Use it to sink bait or lures to a precise depth in both calm and moving water, helping you maintain position and present your rig consistently. Material: copper; weight 4 g; color copper. Shape: bullet with streamlined profile for easy water penetration. Attachment: standard threading for quick, secure line connection. Compatibility: suitable with most monofilament and braided fishing lines. Depth control: place at the desired point on the line to set depth. Durability: copper construction resists wear in regular fishing conditions. Specifications: Weight 4 g; Material: Copper; Color: Copper; Threaded: Yes. Fit: Works with common line diameters used for freshwater or light saltwater setups.

Read more less

This four-leaf clover car dashboard decoration sticker offers a simple way to add a touch of personalization to your vehicle's interior. Measuring 7.5x6cm, it's designed for easy placement on most car dashboards without obstructing views or controls. In everyday use, this sticker can serve as a subtle lucky charm during drives, helping to brighten your commute or enhance the aesthetic of your car while parked. Compact size ensures it fits neatly on dashboards, leaving ample space for other essentials Features a classic four-leaf clover design, appealing to those who appreciate symbolic elements in their daily routine Adhesive backing for straightforward application and removal without residue Durable material withstands typical interior temperatures and light exposure Versatile compatibility with various car models, from sedans to SUVs Lightweight construction prevents it from shifting during drives Ideal for drivers seeking a low-maintenance decorative accent that adds a personal flair to their vehicle's dashboard.

Read more less

This car dashboard sticker displays a four-leaf clover symbol, designed as a compact accessory for vehicle interiors. Measuring 4x3.3cm, it offers a straightforward way to incorporate a traditional luck motif into your daily commute. Use it on your dashboard to serve as a subtle reminder of good fortune, particularly for drivers who value symbolic touches during road trips or routine drives. It attaches easily without obstructing views, making it suitable for personalizing cars without permanent alterations. Features a classic four-leaf clover design for a nod to luck and tradition Compact 4x3.3cm size ensures it fits neatly on most dashboards Adhesive backing for simple, residue-free application and removal Lightweight construction to avoid shifting during drives Neutral color palette that blends with various interior styles Compatible with standard car surfaces for broad usability This sticker fits well for everyday drivers seeking a low-key way to add personality and a sense of positivity to their vehicle's dashboard.

Read more less

The Four Leaf Clover Metal Sticker offers a simple way to decorate your vehicle with a symbolic design. Measuring 4x3 cm, it's crafted from metal for added durability in everyday use. For car owners seeking a non-permanent personalization option, this sticker applies easily to clean, smooth surfaces like bumpers or doors. It provides a subtle enhancement without altering your car's appearance permanently, making it ideal for seasonal updates or personal flair. Constructed from metal for resilience against weather and wear. Self-adhesive backing ensures straightforward application and removal, minimizing risk to paint or surfaces. Compact 4x3 cm size fits discreetly on various vehicle spots without overwhelming the design. Requires surface cleaning before use to optimize adhesion and longevity. Avoid repositioning after initial placement to maintain sticking strength. Symbolizes luck and adds a unique touch to your car's exterior. This sticker is well-suited for drivers wanting a low-maintenance way to express individuality on their vehicles.

Read more less

A four-leaf embossed leather case built for the iPhone 14 Plus, 14, 14 Pro, and 14 Pro Max, offering practical protection with built‑in storage. This case helps reduce pocket clutter by combining card slots and a small cash pocket with everyday phone protection. Durable materials: TPU frame and PU leather exterior provide wear resistance for daily use. Wallet function: Card slots and a small cash pocket keep essentials handy. Full access: All buttons and ports are accessible; charging and headphone use are possible with the case on. Anti-fall: Four-corner TPU edge design helps absorb shocks on drops or bumps. Kickstand: Integrated kickstand supports horizontal viewing for videos or video calls. Buckle clasp: Simple buckle clasp enables quick opening and secure closure. Materials: TPU frame with PU leather outer cover; Pattern: four-leaf embossing; Finish: matte. Fit: Compatible with iPhone 14 Plus, iPhone 14, iPhone 14 Pro, and iPhone 14 Pro Max.

Read more less

The Four-leaf Embossed Leather Phone Case protects your iPhone 15 with practical style. Made from a TPU core and PU leather exterior, it provides durable everyday protection with a wallet-friendly twist. Ideal for everyday carry, it keeps essential cards and a little cash securely on hand. All buttons and ports remain accessible, and you can charge or connect headphones without removing the case. The four-corner TPU layout helps cushion drops while maintaining a slim profile. Durable TPU core with PU leather outer layer for long-lasting wear. Four-leaf embossed texture adds grip and a distinctive look. Card slots plus a small cash pocket keep essentials onboard. Fully accessible buttons and ports; charging and headphone use without removing. Four-corner TPU edges cushion drops and add edge protection. Built-in kickstand offers horizontal viewing for hands-free use. Buckle clasp enables easy, secure opening and closing. Specifications: Materials—TPU core, PU leather outer; Pattern—four-leaf emboss; Compatibility—iPhone 15 Pro Max, 15 Pro, 15 Plus, 15. Fit: Designed to fit the iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, and iPhone 15.

Read more less

The Four-leaf Embossed Leather Phone Case provides durable protection with practical storage for the iPhone 16 lineup. Designed for everyday use, it guards against scratches and drops while keeping essential cards close at hand. Durable materials: TPU inner shell with PU leather exterior resist wear. Wallet function: dedicated card slots and a small cash pocket. Easy access: buttons, ports, charging, and headphone connections without removal. Anti-fall design: four-corner TPU edges cushion impacts from drops. Protection: guards against scratches, dirt, tears and everyday wear. Kickstand and buckle clasp: built-in stand for hands-free viewing and quick closure. Specifications: Materials: TPU inner shell with PU leather outer cover. Finish: four-leaf embossed texture. Compatibility: iPhone 16, 16 Plus, 16 Pro, and 16 Pro Max. Fit: Precisely cut for the iPhone 16 family; all controls, cameras, and ports align for easy use.

Read more less

This four-leaf embossed leather phone case combines durability with everyday practicality. It is designed to protect iPhone 17 Pro Max, Pro, 17, and iPhone Air while keeping essential features accessible. Ideal for daily use, it guards against scratches and drops, holds cards, and supports hands-free viewing when you watch videos. Material: TPU interior with PU leather exterior and a four-leaf embossed texture for grip and style. Wallet function: Card slots and a small cash pocket to carry essentials. Accessibility: All buttons and ports are reachable; charging and headphone use without removing the case. Protection: Four-corner TPU bumper enhances shock absorption and edge protection. Kickstand: Built-in stand tilts to a horizontal position for comfortable viewing. Buckle clasp: Simple design for easy opening and secure closure. Light specifications: Slim profile with moderate weight to maintain pocketability. Fit: Specifically designed to fit iPhone 17 Pro Max, iPhone 17 Pro, iPhone 17, and iPhone Air with precise cutouts.

Read more less

Four-leaf Embossed Leather Phone Case combines durable protection with practical everyday use for select iPhone models. It uses TPU and PU leather to resist wear over time. As a wallet-style case, it provides card slots and a small cash pocket, reducing the need for a separate wallet. The built-in kickstand offers a stable landscape view for videos or video calls. Material and finish: TPU + PU leather with a four-leaf embossed texture Wallet function: card slots and a small cash pocket Full access: all buttons and ports usable without removing the case Anti-fall: four-corner TPU wrap enhances drop protection Protection: guards against scratches, dirt, and tears Kickstand: horizontal stand for hands-free viewing Size/fit: compatible with iPhone 7, 8, SE (2022) and iPhone 13 series Specifications: Materials TPU and PU leather; finish four-leaf embossed texture. Fit: Designed to fit iPhone 7, 8, SE (2022) and iPhone 13, 13 Pro, and 13 Pro Max; precise cutouts keep controls and ports accessible while the case is in use.

Read more less