Products

This front glass replacement is designed for the iPhone 13 Pro and includes an outer glass lens with OCA adhesive for re-bonding to the display assembly. It is intended for users who can perform basic at-home repairs and want a direct replacement for cracked or scratched front glass. Use case: replace a cracked or unresponsive front glass to restore touch access for calls, browsing and apps while retaining the original display and internal components. The kit is useful for DIY repairs, small repair shops, and anyone needing a quick front-glass swap while awaiting professional service. Compatibility: specifically for iPhone 13 Pro (model-specific fit). Included: outer glass lens with pre-applied OCA adhesive for bonding. Material: tempered front glass designed for touch-screen coverage. Installation: reduces air bubbles when aligned; inspect and test before final assembly. Quality check: pre-checked for defects prior to shipping. Light specifications: front outer glass lens, OCA adhesive included. Fit: fits only iPhone 13 Pro; not compatible with other iPhone 13 series sizes. Handle with ESD precautions and avoid bending display cables during installation.

Read more less

This Replacement Connector for iPhone 13 Pro Daily Repairs is a direct-fit LCD display FPC connector designed to restore display signal paths on iPhone 13 Pro and 13 Pro Max logic boards. Use case: when a screen is unresponsive, flickering, or shows intermittent touch, replacing a damaged connector can re-establish the physical connection between the LCD assembly and motherboard. Intended for technicians and experienced DIY repairers who require a targeted part to resolve display connectivity issues. Compatibility: Designed for iPhone 13 Pro and iPhone 13 Pro Max logic boards only. Function: Replaces the LCD display FPC connector to restore screen signal and touch responsiveness. Material & size: Precision metal and polymer contacts in a compact footprint to match factory connector position. Design: Lightweight, low-profile component to fit under original display assembly. Installation: Recommended for professional or experienced repairers using proper soldering or reflow tools. Specifications (light): connector type: LCD FPC; color: metallic/silver contacts; pack: single unit. Fit: confirmed for iPhone 13 Pro and 13 Pro Max models; verify board layout before ordering.

Read more less

This Battery Repair Flex Cable is designed for maintenance on the iPhone 13 Pro Max, providing a direct connection for reading and adjusting battery data when used with an i2C programmer. Use case: repair technicians use this cable to diagnose battery health, verify originality, and modify battery information during replacements or troubleshooting, reducing time spent on repeated diagnostics. Compatibility: Directly fits iPhone 13 Pro Max logic boards and battery connectors. Function: Automatically reads battery information for quick diagnostics when paired with a compatible i2C programmer. Testing: Enables verification of original vs. replacement battery data to identify possible mismatches. Adjustments: Allows modification of battery parameters for correct reporting after legitimate replacements. Durability: Flexible PCB construction and reinforced connector areas for repeated bench use. Light specifications: Standard flex cable design, gold-plated contacts, length ~35–45 mm (typical). Fit statement: Intended specifically for iPhone 13 Pro Max; confirm model board layout before installation.

Read more less

This flex cable replacement is designed for the iPhone 13 Pro Max to restore GPS signal or charging port function. It targets common faults without requiring a full-board replacement, offering a focused repair option for users who want to address specific hardware issues. Use case: replace a damaged or intermittent GPS/charging flex cable to recover accurate location tracking and reliable charging. Suitable for experienced DIYers and repair technicians; installation typically involves small‑part disassembly and connector reseating. Compatibility: specifically for iPhone 13 Pro Max models (device model verification recommended). Function: restores GPS signal routing and/or charging port connectivity when the original flex cable is defective. Condition: inspected before shipment to ensure connectors and traces are intact. Installation: replacement part with standard flex cable connectors for direct swap. Benefit: targeted repair to extend device use and avoid more extensive component replacement. Light specifications: flexible printed circuit assembly; color and exact dimensions match original part. Fit: designed to fit iPhone 13 Pro Max; confirm model number before purchase.

Read more less

This replacement NFC coil with power and volume flex cable is made for the iPhone 13 Pro Max. The assembly combines a copper NFC coil and a polyimide flex cable in a black finish to match the handset's internal layout. Use case: swap this part when the side power button, volume controls, or NFC functionality become intermittent or unresponsive. It restores the signal paths inside the right-side frame so the phone can register button presses and NFC taps without replacing the whole device. Compatibility: iPhone 13 Pro Max (model-specific fit) Components: NFC coil, power flex, volume flex Material: copper coil, polyimide flex cable, plastic connectors Color: black flex with metal coil Installation: designed for direct replacement; professional installation recommended Light specs: approx. OEM form factor, standard connector pinout for 13 Pro Max assemblies. Fit statement: fits iPhone 13 Pro Max internal assembly layouts and replaces the original NFC/power/volume flex components.

Read more less

This replacement flex cable is made for the iPhone 13 Pro Max to address common connectivity issues without replacing the whole device. Use this part when a worn or damaged internal cable causes intermittent Bluetooth, audio routing, or pairing problems. It restores internal signal paths for daily tasks like calls, music streaming, and hands-free use, particularly useful during commutes or office hours. Compatibility: Designed specifically for iPhone 13 Pro Max internal assembly. Function: Restores Bluetooth and related connectivity functions. Condition: Pre-inspected prior to shipment for visual defects. Installation: Intended for professional or experienced technicians to reduce risk of damage. Material & color: Standard flex PCB construction, typical flex cable finish (black/dark flex). Light specifications: flex cable length and connector layout match iPhone 13 Pro Max original design; weight under 5 g. Fit statement: Fits iPhone 13 Pro Max only; verify model number before ordering.

Read more less

The SIM card reader socket board is a replacement part designed for the iPhone 13 Pro Max to restore SIM recognition and basic cellular functions. Use this board when your phone stops detecting a SIM card or loses intermittent cellular connectivity; it lets you replace a damaged socket without replacing the entire device, restoring calls, texts, and mobile data for daily use. Compatibility: Fits iPhone 13 Pro Max only for a precise alignment with the original frame. Function: Replaces faulty SIM detection hardware to re-enable carrier services. Condition: Pre-checked before shipping to confirm basic operational status. Material & design: Lightweight board engineered to match the phone’s internal layout and connectors. Installation: Intended for repair by someone comfortable with small electronics and precision tools. Light specifications: Compatible with iPhone 13 Pro Max model only; not universal. Fit statement: Designed to match the original socket location and connector type for the iPhone 13 Pro Max.

Read more less

Replacement waterproof adhesive stickers designed for iPhone 13 Pro Max to restore the device’s water and dust seal after repairs or case removal. Use these stickers when you replace a battery, open the rear housing, or notice a loose frame seal. They provide a simple way to re-establish moisture resistance during routine maintenance and reduce the chance of debris entering internal components. Model compatibility: specifically cut for iPhone 13 Pro Max housing and rear frame. Material: waterproof, flexible adhesive designed to conform to mating surfaces. Installation: peel-and-stick application; professional installation recommended for best alignment. Inspection: each sticker is visually checked before packing to limit defects. Profile: thin, lightweight design that does not affect case fit or wireless charging. Light specifications: single-sheet adhesive, neutral color (black), thickness ~0.3 mm, sold per unit. Fit statement: Intended for DIY repairers and technicians working on iPhone 13 Pro Max models; confirm model before purchase.

Read more less

Replacement rear camera bracket for the iPhone 13 Pro designed to restore a loose or misaligned camera assembly. This part is intended for users repairing a damaged or worn rear camera mount to recover stable photo and video capture. Use cases include DIY repairs, third‑party repair shops, and technicians addressing rattling lenses, uneven focus, or internal movement after a drop. Suitable for everyday needs such as family photos, video calls, and on‑the‑go photography. Compatibility: Fits standard iPhone 13 Pro models; designed for the rear camera assembly. Fitment: Precision-cut to match the phone’s internal layout for straightforward installation. Condition: Inspected before sale to ensure parts arrive functional and undamaged. Installation: Intended for professional or experienced repairers to reduce risk of further damage. Function: Secures the camera module to reduce movement that can affect image clarity. Light specifications: Rear bracket only; excludes cameras, screws, and other internal components. Fit statement: Designed to replace the original iPhone 13 Pro rear camera bracket and fit the device without modification when installed correctly.

Read more less

This replacement flex cable restores the volume and power button connections on the iPhone 13 Pro. Designed for direct replacement, it addresses unresponsive or intermittent button behavior caused by wear or accidental damage. Use case: suitable for DIY repairs or technician replacement when volume controls, mute toggle, or the side power button stop responding. Restores routine tasks like adjusting call volume, taking screenshots, and powering the device on/off. Compatibility: iPhone 13 Pro (standard model) Function: replaces volume up/down and side power button flex cable Material: flexible printed circuit with connector pads for factory-style fit Color: black flex ribbon matching original internal components Installation: requires device opening and screw/midframe access; intended for users with repair experience Light specifications: single flex assembly, OEM-style connector pitch, weight under 5 g. Fit statement: Fits iPhone 13 Pro models without modification when installed according to repair guides.

Read more less

Replacement screws for iPhone 13 Pro repairs provide the specific fasteners needed when securing the charging port or bottom assembly during device maintenance. Use these screws for at-home troubleshooting, small component replacements, or when reassembling after screen or port work. Intended for users comfortable with basic DIY repair steps; professional installation is recommended if unsure. Model compatibility: Designed for iPhone 13 Pro charging port and bottom assembly components. Quantity: Set includes the essential screws used in standard charging-port reassembly. Material and finish: Metal screws with a corrosion-resistant coating for typical handheld device environments. Size: Precision-sized to match factory screw holes (small Phillips/tri-point heads where applicable). Handling: Compact, lightweight set packaged for easy storage and transport. Light specifications: Exact screw diameters and head types vary by assembly; check measurements before installation. Fit: Fits iPhone 13 Pro charging-port assemblies only; not compatible with other iPhone models.

Read more less

The iPhone 13 Pro SIM card tray is a direct replacement part designed to restore SIM access when the original tray is stuck, bent, or worn. It arrives pre-inspected and ready for routine phone maintenance. Use cases include travelers who swap SIMs frequently, technicians performing repairs, or owners troubleshooting intermittent connectivity. Replacing the tray can avoid extended downtime and restore reliable SIM seating without replacing the whole device. Compatibility: Specifically made for iPhone 13 Pro models only. Fit: Engineered for a precise fit to secure the SIM card and align with the device's slot. Condition: Inspected before shipping to ensure functional integrity on arrival. Installation: Compact and lightweight; designed for easy installation with appropriate tools. Use case benefit: Helps prevent SIM misalignment and intermittent signal caused by damaged trays. Light specifications: Direct replacement dimensions match original tray tolerances; intended for nano-SIM cards. Fit statement: Fits iPhone 13 Pro only; not compatible with other iPhone models. Professional installation recommended to avoid damage.

Read more less

Replacement set of a SIM tray and side keys designed for the iPhone 13 Pro. This kit restores SIM access and side-button controls with parts sized and shaped to match the original layout. Use case: when volume, power, mute switch or SIM access become unresponsive after drops or wear, replacing these components can return button function without a full-device repair. Suitable for users who need a practical, on-device fix for daily communication and travel needs. Includes: double SIM tray, volume up/down keys, power key, mute switch, vibrator key. Compatibility: specifically for iPhone 13 Pro (not for other iPhone models). Materials: metal SIM tray with plastic-coated side keys and metal actuators for contact reliability. Finish: color-matched finish to align with iPhone 13 Pro exterior. Installation: direct replacement; requires basic disassembly and standard repair tools. Light specifications: OEM-form factor, factory-aligned dimensions, single-pack replacement set. Fit statement: Designed to fit the iPhone 13 Pro when installed correctly; verify model number before purchase.

Read more less

This iPhone 13 camera bracket is a replacement component for restoring the rear camera assembly's alignment and stability. It is intended for routine repair or part-swapping when the existing bracket is bent, loose, or worn. Use cases: replace a bracket after a drop, correct camera misalignment that causes focus issues, or maintain camera housing during screen or rear-panel repairs. Intended for users repairing a single device or technicians performing small-scale phone maintenance. Compatibility: Designed for standard iPhone 13 rear camera assembly integration. Function: Secures camera module to maintain optical alignment and reduce movement. Condition: Sold as a replacement part inspected for fit and function prior to dispatch. Installation: Recommended for installation by experienced technicians or with proper repair tools. Benefit: Enables targeted repair without replacing the entire camera or phone. Specifications: replacement bracket for iPhone 13 rear camera; fits standard iPhone 13 models. Fit statement: Fits iPhone 13 rear camera assemblies; verify model number before purchase to ensure compatibility.

Read more less

Replacement back camera module for the iPhone 13 designed to restore basic photo and video functions after a faulty unit. This direct-fit part replaces the rear camera assembly to help recover standard imaging capability for everyday use. Use case: for users who need clear snapshots during family events, work notes, or quick social uploads without upgrading the entire phone. Intended for practical repairs that address common issues like blurred images or intermittent focus. Compatibility: Fits standard iPhone 13 models (rear camera assembly). Components: glass lens, sensor mount and metal/plastic housing matching original layout. Color: black module to match factory appearance. Installation: recommends professional or experienced technician installation to avoid further damage. Function: restores native camera alignment and connector compatibility for stock camera software. Light specifications: OEM-style dimensions and connector pin layout for iPhone 13 rear camera; single-module replacement. Fit statement: Designed for a seamless fit with original housing and internal brackets on iPhone 13.

Read more less

This replacement back housing cover restores the exterior of an iPhone 13, intended to replace scratched, cracked or discolored rear panels and return the phone to regular daily use. Use case: swap the damaged back panel to maintain functionality and appearance for texting, browsing and everyday tasks without replacing the whole device. Professional installation is recommended to ensure correct alignment and avoid assembly issues. Direct replacement: Designed for iPhone 13 models for precise alignment with ports and buttons. Restores appearance: Addresses scratches, cracks, dents and discoloration to refresh the device exterior. Fit-focused design: Matches original back housing dimensions to retain camera and button clearances. Pre-inspected: Arrives checked to reduce the chance of immediate defects on delivery. Maintenance alternative: Extends usable life of an existing iPhone 13 without a full device upgrade. Light specs: Compatible specifically with iPhone 13. No other model compatibility implied. Fit statement: Intended to replace the original iPhone 13 back cover and fit the device as a like-for-like housing component.

Read more less

Replacement back cover kit for the iPhone 13 designed to restore the phone’s exterior and core button functions. This kit includes the back glass assembly, side buttons, card tray, flex cables, and a wireless charging module for retained wireless charging capability. Use case: replace a cracked or scratched rear panel, restore unresponsive power/volume keys, or recover wireless charging after damage. Suited for users repairing a single iPhone 13 at home or technicians performing routine exterior repairs; professional installation is recommended to avoid damage to internal components. Complete assembly: back cover with pre-installed side keys and card tray for alignment. Included flex cables: power and volume flexes to restore button responsiveness. Wireless module: retains Qi charging function when fitted correctly. Pre-checked parts: components inspected to reduce common replacement issues. Color options: available in factory-matched finishes to maintain original look. Light specifications: fits iPhone 13; material: glass/aluminum frame; color: model-dependent. Fit: designed specifically for the iPhone 13 to match original alignment and mounting points.

Read more less

This replacement connector is made for the iPhone 13 to restore charging connections without replacing the whole device. Use it when the charging port shows intermittent contact, is loose, or stops accepting cables. Intended for users comfortable with device repair or for technicians performing a targeted fix. Professional installation is recommended to avoid damage. Compatibility: Designed for standard iPhone 13 models and port layout. Fit and alignment: Precision contacts and housing match the phone’s connector geometry for a direct swap. Durability: Compact replacement built for everyday handling and cable insertion cycles. Condition on arrival: Inspected for visible defects prior to shipping. Installation: Supports standard replacement procedures; recommend ESD precautions and proper tools. Light specifications: connector assembly for iPhone 13 charging port; compact form factor suitable for in-device mounting. Fit statement: Intended to replace the original iPhone 13 charging connector; confirm model and port variant before ordering.

Read more less

This replacement flex cable is made to address GPS signal and charging connectivity issues in iPhone 13 models. It provides a direct swap option for users repairing their device rather than replacing the whole phone. Use-case: when an iPhone 13 stops charging reliably or shows GPS/antenna dropouts, swapping this flex cable can restore the affected function. Intended for DIY repairers and technicians; professional installation is recommended to avoid damage. Compatibility: Direct replacement for iPhone 13 GPS signal/charging flex cable. Condition: Pre-checked for basic functionality before shipment. Material: Flexible printed circuit with standard connector to match original routing. Color: Standard black/brown flex ribbon consistent with factory appearance. Installation: Fits existing components and mounting points; requires small tools and steady hands. Light specifications: single flex ribbon assembly, OEM-style connector pitch, length matches iPhone 13 internal layout. Fit statement: Designed specifically for iPhone 13 series; confirm model number before purchase.

Read more less

This replacement earpiece is designed specifically for the iPhone 13 to address worn or damaged earpiece speakers. It provides a direct, component-level fix to restore call and media sound without replacing the device. Use it when call audio is faint, distorted, or uneven; it’s suitable for daily callers, technicians performing repairs, or owners restoring basic handset functionality. Installation is intended for users comfortable with small repairs or for professional technicians. Compatibility: Direct fit for iPhone 13 models; aligns with original mounting points and connectors. Material: Precision-molded plastic housing with integrated speaker mesh for dust resistance. Color: Black component to match internal phone aesthetics. Benefit: Restores clearer call audio and improves voice pick-up for phone calls and video conferencing. Maintenance: Designed for straightforward replacement; recommended cleaning of contact points during install. Light specifications: standard iPhone 13 earpiece dimensions, compatible connector type, nominal impedance matching original speaker. Fit statement: Intended to replace the original iPhone 13 earpiece; confirm model before purchase.

Read more less

This replacement screen assembly for the iPhone 13 restores a damaged display with a focus on practical repair and compatibility. It replaces the full screen assembly to recover touch response and visual clarity without replacing the entire device. Use case: for everyday users who dropped their phone and need a direct, cost-conscious repair. It supports pre-installation testing, so you can verify display and touch function before completing the swap. Suitable for DIY repairs by users comfortable with basic phone disassembly and standard electrostatic precautions. Direct fit: Designed to match iPhone 13 dimensions and mounting points for straightforward installation. Integrated flex cable: Single assembly cable — avoid bending beyond 90° to protect connections. Pre-testable: Power-on and touch-check before final reassembly. Materials: glass front with digitizer and LCD/OLED module (as applicable to iPhone 13). Color: matches original black edge framing for a consistent appearance. Light specs: full-panel replacement, includes digitizer and display module; follow ESD and eye-protection guidance. Fit: engineered for iPhone 13 only; not compatible with other iPhone models.

Read more less

The iPhone 13 Screen Replacement for Everyday Mobile Use is a direct-fit display assembly designed to restore a damaged 6.1‑inch iPhone 13 screen without replacing the whole device. Use this kit to recover touchscreen function and visual clarity after cracks or display failure. It suits at-home repairs or professional service and addresses common needs like restored app visibility, accurate color for photos, and reliable touch response. Display: 6.1-inch OLED, 2532 × 1170 pixels for native resolution. Color & Brightness: True Tone and HDR support to maintain matched color temperature and dynamic range. Compatibility: Fits standard iPhone 13 models (not iPhone 13 mini or Pro/Pro Max variants). Installation notes: Pre-installation testing recommended; protect flex cables and avoid sharp bends. Use cases: Suitable for users replacing cracked glass, unresponsive touch, or dim displays to extend device service life. Light specifications: OLED panel, native resolution, True Tone/HDR enabled, standard iPhone 13 connector layout. Fit: Designed for standard iPhone 13 dimensions and connector positions; verify model before ordering.

Read more less

Replacement speaker ringer buzzer for iPhone 13 designed to restore audible calls and notification sounds on devices with a damaged or worn speaker. Use-case: swap this part when incoming calls are faint, notification tones are distorted, or the device is otherwise quiet during ring mode. Suitable for technicians and experienced DIYers repairing a single-device issue to avoid full-device replacement. Compatibility: specifically sized for iPhone 13 models (not compatible with other series). Material: precision-molded plastic and metal contacts for contact stability. Function: restores ringer and notification audio paths; designed for placement in original speaker cavity. Fitment: pre-aligned mounting points for correct seating and connection. Condition: new replacement part inspected prior to dispatch to reduce defects. Light specifications: approximate dimensions match iPhone 13 internal speaker bay; connector type matches factory flex cable interface. Fit statement: intended as a direct replacement for iPhone 13 speaker ringer; professional installation recommended to ensure correct function and avoid device damage.

Read more less

The iPhone 13 Screen Repair Positioning Mat with Frame Bezel is a metal alignment tool designed to hold the display and frame in the correct position during screen replacement. Use this mat to secure the iPhone 13 chassis and glass while loosening adhesives, reconnecting flex cables, or testing the display. It helps maintain correct bezel alignment and reduces repeated adjustments for both technicians and DIY users. Material: durable metal plate for stable support and repeated use Compatibility: designed specifically for iPhone 13 screen replacement and frame bezel alignment Design: integrated frame bezel cutout to position housing and display accurately Portability: compact, lightweight layout for bench use or transport Workflow: keeps components accessible for soldering, cable routing, and adhesive application Specifications: metal construction; approximate footprint 160×80 mm; weight 120 g (measurements vary by batch). Fit statement: Made to fit iPhone 13 models only; not compatible with other iPhone sizes or generations.

Read more less