Auto Replacement Parts

The Bluetooth Car Adapter for Honda CR-V and Civic wires into the factory CD changer port to add wireless audio streaming to your stock stereo. It enables music playback from smartphones, tablets, or other Bluetooth devices without cables. After pairing, audio streams through the original radio speakers with the car’s controls remaining as the interface. Plug & Play installation via the original CD changer port for seamless integration. Bluetooth 5.0 with A2DP for wireless streaming to the factory stereo. Hi‑fi sound quality through a wired harness with minimal interference. Power range 5–12V; compact wiring for a clean install. Limitations: does not support hands-free calls (HFP) or AVRCP control via car buttons. Compatibility: Civic 2006–2013, CR-V 2008–2013, and 2008+ Accord (8th gen onward). Light specifications: Bluetooth 5.0, input 5–12V. Fit: Designed for Honda Civic 2006–2013, CR-V 2008–2013, and 2008+ Accord models with the factory CD changer port.

Read more less

This Car Wireless Bluetooth Module plugs into the original CD changer port to add Bluetooth audio to your factory Toyota stereo. It enables wireless streaming from phones or tablets to the car speakers without replacing the head unit, making it easy to play music or podcasts on the go. Plug-and-play installation via the CD changer port for a seamless, integrated fit. Wireless A2DP streaming from Bluetooth devices to the factory stereo. Hi-fi sound through a wired harness with minimal interference. Bluetooth 5.0 with 5–12V power range, broad device compatibility. Note: does not support hands-free calling or AVRCP control from car controls. Compatible with 2007–2009 Toyota models (4Runner, Avalon, Camry, Corolla, FJ Cruiser, Highlander, Land Cruiser, Matrix, Prius, RAV4, Sequoia, Solara, Tacoma, Tundra, Yaris, Venza) with AUX button. Fit: Designed for models with AUX input that use the CD changer port; verify your vehicle's interface before purchase.

Read more less

This Car Wireless Bluetooth Audio Adapter adds wireless music streaming to compatible Ford models without replacing the head unit. It plugs into the original CD changer port for seamless integration with the factory stereo. Use it on daily commutes or road trips to play music from a Bluetooth device through the car’s speakers, while maintaining the car’s usual audio interface. Plug & Play via the original CD changer port for easy installation Bluetooth 5.0 enables wireless A2DP audio streaming from phones and tablets Wired harness connection preserves signal quality with minimal interference Powered by standard car supply (5–12V) for reliable operation Compatible with Ford Focus, Fiesta, Mondeo models featuring the CD changer port Maintains factory stereo controls and interface without head unit replacement Notes: Does not support hands-free calling via vehicle controls. Does not support AVRCP control for track changes using radio or steering wheel buttons. Fit: Designed for Ford Focus, Fiesta, Mondeo with the original CD changer port; confirm compatibility with your specific model and radio configuration.

Read more less

Car Bluetooth Aux Audio Adapter For Kenwood 13 Pin enables wireless music playback through your factory Kenwood head unit without replacing components. It plugs into the original CD changer port for a clean, plug‑and‑play upgrade. Ideal for daily commutes and road trips when you want to stream music from a phone, tablet, or other Bluetooth device through the car speakers while keeping the dash uncluttered. Plug & Play via the original CD changer port for fast, tool‑free setup Bluetooth 5.0 with A2DP for stable wireless music streaming Wired connection through a car stereo harness delivers high‑fidelity sound with minimal interference Compatible with all Kenwood 13‑pin CD hosts (examples: KRC-553, CA-C2AX, KCA-iP500, CA-C1AX) Power requirements: 5–12 V DC from the vehicle electrical system Note: Does not support hands‑free calling or AVRCP control via car radio or steering wheel buttons Light specifications: Bluetooth version 5.0; operating voltage 5–12 V DC. Fit: Compatible with all Kenwood 13‑pin CD receivers, including common models listed above.

Read more less

Car Wireless Bluetooth AUX Adapter for Renault Factory Stereo provides Bluetooth audio streaming without replacing the factory unit. It installs through the CD changer port for a clean, integrated look. Use it to play music from a smartphone, tablet, or other Bluetooth device through the Renault radio, preserving original controls and display while on the go. Plug & Play: installs via the original CD changer port for quick setup and seamless integration. Wireless A2DP playback: streams audio from Bluetooth devices to the factory stereo when AUX is available in the update menu. Hi‑fi sound quality: wired connection through the harness minimizes interference and preserves clear audio, rivaling the CD source. Bluetooth 5.0 and power: stable pairing with 5–12 V operation, suitable for most vehicle power systems. Compatibility notes: requires Renault Update List radios with an AUX option; not compatible with radios that have a screen or GPS, and not for models before 2005. Light specs: Bluetooth Version 5.0, voltage 5–12 V. Fit: designed for Renault models from 2005–2011 using Update List radios (Clio, Espace, Kangoo, Laguna, Megane, Scenic, Trafic, Twingo, Modus, Master); not for pre-2005 models.

Read more less

This BMW parking brake switch cover replacement provides a direct-fit option for select models, helping restore the interior’s look without altering other controls. Use it to replace a worn, scratched, or faded switch cover during maintenance or a cabin refresh, keeping the parking brake area consistent with the rest of the dashboard. Material: PC+ABS for durable, impact-resistant construction Size: 35 x 35 x 30 mm OE reference: 61316822518 Compatibility: BMW 5/6 Series, X3, X4; F10, F11, F06, F12, F25; 2009–2014/06 Installation: Easy to install as a direct replacement Notes: Please verify the OE number 61316822518 before purchasing to ensure a correct match for your vehicle. Fit: Direct replacement for the listed BMW models and production window.

Read more less

This right-hand interior door armrest panel pull is a replacement part for select BMW models, crafted from a PC+ABS blend for durability and a clean, factory-like finish. Ideal for restoring grip and function when the original door pull is worn, loose, or damaged in daily driving. Material: PC+ABS blend for durability and impact resistance Size: 28.5 x 10 x 4.5 cm Type: Right-side interior door handle / armrest panel pull Compatibility: BMW X5 E70 (2007–2013); BMW X6 E71/E72 (2008–2014) OE reference: 51416969402 Easy installation: Designed for straightforward swap, no special tools required Optional light specifications: No integrated lighting features. Fit: Please verify the OE number 51416969402 and model compatibility before purchase.

Read more less

This valve spring compressor tool is built for reliable service on a range of vehicles. Made from iron and weighing 170 g, it offers a compact, durable option for engine work. Use it to compress valve springs during maintenance tasks such as replacing seals, refacing valve guides, or inspecting spring seating, without removing the cylinder head. Material: iron for sturdy, long-lasting performance Weight and size: 170 g, 15.5 x 12.5 cm footprint Easy to install: simple setup that fits standard valve springs Universal compatibility: designed for common valve spring designs across many cars Portable and compact: lightweight design for easy storage and on-the-go use Specifications: Material: iron; Weight: 170 g; Size: 15.5 x 12.5 cm. Fit: Suitable for universal car valve spring compression tasks and standard engine spring setups.

Read more less

Auto Car Wire Harness Terminal Extraction Tool, a 3-piece kit designed to remove car wire terminals without damage. The set is built for safe, controlled release of terminals from harness connectors. Ideal for automotive repairs or routine maintenance, this kit helps safely release terminals from wiring harnesses without prying or bending connectors. It supports quick checks during diagnostics and works with color-coded and standard terminal types. Three-piece extraction set for diverse connector types Removes terminals without damage by pushing and pulling pins Works with multiple automotive wire connector styles Compact, portable kit for on-the-spot repairs Simple, tool-based release without prying Release mechanism minimizes risk of terminal or wire damage Compatible with common automotive wire harness terminals used in most cars.

Read more less

This 3.5mm to USB car audio adapter lets you play MP3 music from a USB flash drive through your vehicle's AUX input. Designed for cars without Bluetooth or built-in USB playback, it plugs the 3.5mm stereo jack into the car's AUX port and the USB-A end into a flash drive. Songs on the drive auto-play when connected. 3.5mm stereo plug connects to car AUX input for wide vehicle compatibility USB-A port reads MP3 files from a USB flash drive Auto-play starts playback when the device is connected to the car Retractable cable length: 10 cm retracted, extendable to 100 cm for flexible setup Plug-and-play design for simple, no-fuss operation Notes: For best results, use USB drives with MP3 files only, placed in the root directory (no folders or other file types). Large-capacity drives may not be fully recognized. Fit: Compatible with most vehicles that provide a 3.5mm AUX input and an available USB port for flash drives. No Bluetooth required.

Read more less

6 m 4-pin to 2.5 mm rearview camera extension cord designed to extend the reach of your backup camera on BMWs and other vehicles. It uses a 4-pin to 2.5 mm male interface and supports 12V camera systems. The cable features a durable, thick-walled coating for long-term use and offers a straightforward plug-and-play installation. Use cases include replacing a damaged cable or routing a camera through dashboards, in sedans, pickups, buses, and trucks where the original cord is too short. Length: 6 meters Interface: 4-pin to 2.5 mm male Power: 12 V DC, up to 2 A Construction: durable, thick-walled cable Installation: plug-and-play for quick setup Compatibility: suitable for rearview cameras or dash cams that use a 4-pin connector Light specifications: Length 6 m; interface 2.5 mm; 4-pin connector; voltage 12 V; current rating up to 2 A. Fit: Designed for vehicles with a 4-pin rear camera connector and a 2.5 mm input; the 6 m length helps reach cameras mounted in the rear or on trailers.

Read more less

5.5m Universal Car Reversing Camera Extension Cord extends the reach between a rear-view camera and its display with a standard 4-pin connector. It offers plug-and-play setup for quick installation and is suitable for aftermarket or factory-style installations to maintain a clean wiring route. Use this extension where factory wiring is too short or camera position requires extra reach, such as larger vehicles or custom camera mounts. Length: 5.5 meters 4-pin connector for standard reversing camera systems Plug-and-play installation; no tools required Durable cable with corrosion-resistant connectors Universal compatibility with most 4-pin setups Suitable for routing along bumpers, trunks, or under trims Fit: Designed for most 4-pin reversing camera systems. The 5.5 m length helps you route the cable around the vehicle body, accommodating different camera mounting positions and monitor locations.

Read more less

This 10-meter Universal Car Reversing Camera Extension Cord provides a long, reliable link between your rear‑view camera and display. It is designed for universal compatibility and straightforward installation. Use it when the camera is mounted far from the monitor or in larger vehicles, helping maintain a clear, continuous feed without signal loss. The cord supports 4-pin cameras and standard displays in most setups. Length: 10 m (33 ft) cable for flexible routing between camera and display Connector: 4-pin plug for common rear‑view camera systems Durable construction: corrosion resistant and wear resistant components Installation: plug-and-play, no special tools required Compatibility: designed for use with most 4-pin reversing cameras and displays Fit: Compatible with most 4-pin rear-view camera systems and standard displays for passenger cars and light trucks.

Read more less

The 5.5m Car Reversing Camera Extension Cord extends the reach of your rear-view camera setup with a simple, plug-and-play connection. Use this longer cord when the camera is mounted toward the bumper on larger vehicles or when the monitor sits farther inside the cabin. Length: 5.5 meters for flexible routing from bumper to cabin Connector: standard 4-pin design compatible with common cameras and displays Installation: plug-and-play, no tools required Durability: corrosion-resistant connectors and wear-resistant jacket Cable protection: abrasion-resistant outer coating for daily vehicle use Compatibility: suitable with most 4-pin automotive rear-view camera systems Specifications: Length 5.5 m; 4-pin connector; corrosion- and wear-resistant construction. Fit: Works with standard 4-pin car reversing camera systems.

Read more less

The Car Reversing Camera Extension Cord extends your rearview camera setup with a 5.5-meter cable. It features a 5-pin connector and a durable, wear-resistant construction. Designed for long-term use in vehicles, it offers stable signaling and reliable performance. Ideal when your camera sits farther from the head unit or needs routing through trunk or bumper areas. Its flexible routing supports installations behind bumpers, through wheel wells, or along door sills. 5-pin connector compatible with most car rearview cameras 5.5 m cable length for versatile routing Durable jacket and corrosion-resistant contacts Plug-and-play installation for quick setup Suitable for interior or exterior routing in many vehicles Specifications: Pin count 5, Cable length 5.5 m. Fit: Works with standard 5-pin rearview camera connections and commonly used displays.

Read more less

This 2m car reversing camera extension cable connects your rear-view camera to the monitor with a simple plug-and-play setup. Built for reliability, it features a 5-pin connector and a durable, corrosion- and wear-resistant jacket. Quality materials resist moisture and vibration in vehicle environments. Use it to extend reach when the camera or monitor is farther apart, or to replace a damaged cable. The 2-meter length provides flexible routing behind panels and along the vehicle frame while preserving signal integrity. It is suitable for installs in trucks, SUVs, or cars with center consoles. Length: 2 m 5-pin connector Plug-and-play installation Corrosion resistant Wear resistant outer jacket Compatible with most 5-pin reversing camera systems and rear-view monitors Specifications: 2 m length, 5-pin interface, automotive-grade construction. Fit: Designed to fit most 5-pin car reversing camera systems and rear-view monitors.

Read more less

The Universal Car Reversing Camera Extension Cable extends your rear-view camera wiring with a 3m length and a 5-pin connector, providing a straightforward, install-ready option for longer cable runs. Use it when the factory cable isn't long enough to reach your display or monitor. The plug-and-play design avoids soldering, and the cable routing can be tucked along bumpers or interior panels for a clean install. 3m length for versatile routing 5-pin connector supports common reversing cameras Durable, wear-resistant construction Corrosion-resistant jacket designed for automotive use Plug-and-play installation—no soldering required Compatible with standard rear-view camera wiring harnesses Flexible routing helps hide cables along panels Specifications: Length 3 meters; 5-pin connector; automotive-grade compatibility. Fit: Compatible with most 5-pin automotive reversing camera systems and standard wiring harnesses.

Read more less

This LED Turn Signal Flasher Relay for Honda and Lexus provides a plug‑in solution to address hyper‑flashing when LED bulbs are used. Ideal for upgrading factory bulbs to LEDs without adding resistors. It replaces the stock 8-pin flasher and restores normal blink cadence with a simple, direct installation. Direct, 8-pin plug‑in replacement for compatible Honda and Lexus vehicles. Adjustable frequency for consistent blink rates with different LED loads. Eliminates the need for external load resistors; no cabling modifications required. Completely water resistant housing for all weather use. Operating voltage ~12.8V with a 0.1W–150W load range. Broad LED compatibility; suitable for general LED turn signal bulbs. Specifications: 12.8V operating voltage; 0.1W–150W load range; 8-pin socket; plug-and-play replacement. Fitment: Compatible with Honda and Lexus models that use an 8‑pin flasher connector. Confirm your vehicle uses a standard 8-pin plug before installation.

Read more less

This LED 3-Pin Turn Signal Flasher Relay is designed for European cars to address LED turn signal issues. It provides a direct, tool-free replacement for the stock flasher. If your LED turn signals flash too quickly or unevenly, this relay replaces the original unit to restore a normal blink rate and reliable operation. 3-pin design for easy plug-and-play installation Direct replacement, no wiring to install resistors 12V operation; current range 0.02A–20A Water-resistant housing for all-weather use Restores normal flashing rate for LED bulbs Compatible with general LED lamp types in European vehicles Sealed housing design for moisture resistance and long-term reliability Light specifications: Operating voltage 12V DC; compatible load current 0.02A–20A. Fit: 3-pin turn signal flasher sockets used by many European vehicles.

Read more less

This car audio wiring kit provides color-coded power and signal cables for subwoofer amplifier installations in cars. The kit helps organize wiring for a clean, reliable setup. Ideal for upgrading or replacing factory wiring to connect a dedicated subwoofer amplifier, supporting clearer bass and stable signal paths in the vehicle. Color-coded cables in red, blue, yellow, and black for quick identification and routing. Lengths included: red 3.8 m, blue 3.8 m, yellow 3.9 m, black 0.5 m. High-density conductor material aims to reduce signal loss and minimize interference. Durable outer jacket provides wear resistance and long-term protection in vehicle environments. Compatibility: suitable for standard car subwoofer amplifier installations and common audio system layouts. Specifications: Conductor material: high-density conductors; Jacket: PVC; Color codes: red, blue, yellow, black. Fit: designed for typical 12V car audio setups; verify routing path and connector compatibility with your amplifier.

Read more less

The Car and Boat Toggle Light Switch is a waterproof ON-OFF switch designed for 12–24V electrical systems in vehicles and marine equipment. Built for durable indoor or weather-exposed installations, it provides reliable control for accessories and lights. Use this switch to power cockpit lights, bilge pumps, or auxiliary circuits on cars, boats, motorcycles, buses, RVs, and trailers. The 4-pin design supports flexible wiring configurations and clean panel integration. 4-pin configuration supports flexible wiring 12–24V universal compatibility for cars, boats, and accessories LED indicator confirms when the circuit is active Waterproof, flame-retardant housing for damp environments Protection against short circuits, overload, and polarity reversal ON-OFF toggle with secure action Light specs: LED status indicator helps quick checks during operation. Fit: Suitable for standard 12/24V circuits across multiple vehicle types and installations.

Read more less

This 5-pin on/off fog light switch is designed for Toyota vehicles. The cable-free module fits standard front-panel switch holes, and its ABS housing provides durable, steady performance. Use it to replace a worn fog light switch or to install fog light control in compatible models. It connects to your vehicle's wiring harness without an integrated cable. 5-pin on/off configuration Cable-free design; wiring to vehicle harness required Durable ABS plastic housing Easy installation into standard front-panel switch holes Broad compatibility with models including Innova 2012, Land Cruiser JF100 (1998–2007), Hilux Surf (2005–2009), Hiace 2012, Avanza 2007–2012, Myvi 2011–2014, Calya 2017–on, and more No accessories included; verify connector and hole fit before installation Specifications: Material — ABS; Connector — 5-pin; No cable included. Fit: Designed to suit a wide range of Toyota switch holes listed above. Please confirm hole size and connector alignment prior to purchase.

Read more less

This Fog Light Switch (5-pin, On/Off) controls front fog lamps with a simple 4-wire setup. Built for automotive use, it fits standard switch holes in many dashboards. Ideal for replacing a worn switch or adding fog-lamp control to compatible Toyota vehicles. It installs in the front panel with minimal wiring, reducing installation time and avoiding complex panel work. 5-pin, On/Off control for fog lamps 4-wire configuration supports standard fog-light circuits Durable ABS construction for long-term use Easy installation in standard switch holes and front-panel cutouts Broad compatibility: Kijang Innova 2012; Land Cruiser JF100 (1998–2007); Hilux Surf 2005–2009; Avanza 2007–2012; Myvi 2011–2014; Calya 2017–on Light specifications: 5-pin configuration with On/Off operation; designed for typical 12V automotive electrical systems. Fit: Compatible with a wide range of Toyota models and related vans/SUVs listed above; verify hole size and wiring before installation.

Read more less

Universal Push Button Switch 4 Pin For Vehicle Lights provides a four-terminal control for vehicle lighting circuits. Rated for DC 12/24 V, it is designed for universal car use. Size shown in the image. Use this switch to control headlights, auxiliary lights, or interior lighting in cars, trucks, or motorcycles. It offers simple on/off operation for 12/24 V systems, making it a practical replacement for worn or missing switches. Four terminals for straightforward wiring DC 12/24 V compatibility Universal fit for most cars, trucks, and motorcycles Package includes 1 x Double Control Switch Sized as shown in the image for reference Specifications: Pin count 4; Rated voltage DC 12/24 V; Package includes 1 x Double Control Switch. Fit: Suitable for vehicles requiring a 4-pin push button switch with 12/24 V wiring.

Read more less