Auto Replacement Parts

This 8‑way 25A dual‑row terminal connector set with cover provides a practical, compact wiring solution for electrical enclosures. The rugged PBT UL94V‑0 body pairs with tin‑plated steel screws for reliable, repeated connections. Use this set in RV distribution boxes, marine panels, or electrical appliances where orderly, secure connections are needed. The 12 mm screw spacing and M4 terminals help alignment and installation while keeping polarity clear. 8‑way, 25A per circuit, dual‑row terminal block 600VAC rating; withstands 2500V for 1 min 22–10 AWG (4.0 mm2) wire compatibility M4 screws, 12 mm spacing; -30 to 120°C Includes red and black 8‑position connectors and a cover (5‑pack) PBT UL94V‑0 body with tin‑plated steel screws Light specifications: color accents aid polarity identification; assembly uses standard M4 hardware; five sets per pack. Fit and compatibility: designed for 22–10 AWG wires and M4 mounting in RV or yacht distribution boxes and other electrical panels.

Read more less

This Car Water Tank Radiator Cap regulates coolant pressure and provides a built‑in temperature gauge for quick checks without starting the engine. It operates within a 0.9–1.3 bar range to balance coolant levels. Use this cap to manage coolant expansion and contraction during operation. When coolant heats up and expands, the cap vents excess fluid to a secondary tank; as the system cools, the cap allows return flow to restore the water level and prevent vacuum. Pressure release at 1.3 bar prevents overflow Built‑in temperature gauge shows coolant temperature without engine run Silicone inner stopper improves heat resistance and seal Universal fit for most car water tanks Compact design supports reliable, ongoing cooling management Specifications: Pressure range 0.9–1.3 bar; Temperature gauge; Silicone inner stopper for heat resistance and sealing. Fit: Suitable for most standard car coolant reservoirs.

Read more less

Replace worn or damaged exterior door handles on Hyundai Sonata with this two-pack replacement set. Ideal for repairing driver- or passenger-side handles after wear or breakage, restoring exterior access and normal operation. Material: ABS high-strength plastic for durable daily use. Design: Exterior handles with precise mounting points for a secure, factory-like fit. OE references: 826513K000 and 82651-3K000; verify compatibility with your vehicle before purchase. Installation: Simple swap with common hand tools; no major modifications required. Package contents: Includes two exterior door handles (2-pack) for the listed Sonata years. Specifications: Material – ABS; Pack size – 2 handles; Model years listed in the compatibility notes. Fit: Designed to fit Hyundai Sonata models: GL/GLS/GLX/LX/VE 2005; GLS/Limited/SE 2007; GL/GLS/Limited/SE 2008. Please double-check OE numbers before ordering.

Read more less

Universal AC Vent 100x75mm Replacement Part for Vehicles offers a practical, ready-to-install vent solution for in-cab air conditioning. Molded from ABS in black, it is designed for standard openings used in many motorhomes, buses, and yachts. Use this universal vent for replacements or upgrades in any vehicle with a 100x75 mm opening. It supports reliable airflow in compact spaces such as living areas, cabs, and cabins, while delivering a neat, consistent appearance that matches existing interiors. Material: ABS plastic, black finish Size: Outer 100x75 mm; hole 75 mm; height 28 mm Durable, reliable construction for vehicle use Compatibility: motorhomes, buses, yachts Easy installation in standard openings Fit: Designed to fit standard 100x75 mm openings in vehicle HVAC vents, including motorhomes, buses, and yachts.

Read more less

Dodge/Chrysler Window Master Control Switch Replacement is a practical, lightweight component designed for specific minivans. Made from durable plastic, it offers stable performance and straightforward installation. When the driver’s window controls fail or become unreliable, this replacement restores full, one-step operation for all windows from the driver's position. Fits Chrysler Town & Country (2008-2009) and Dodge Grand Caravan (2008-2010) Construction: lightweight plastic for everyday use OE references: 68039999AC / 68039999AA / 68039999AB Easy, plug-and-play installation with standard connectors Restores driver-side master control across all four windows Reliable switch with stable operation and factory-style feel Fit and compatibility: Confirm OE numbers before purchase; this replacement is designed to match the specified models and years.

Read more less

Vacuum Solenoid Valve for Mazda Idle Speed Control is a direct-fit replacement designed to help regulate idle when the original valve begins to fail. Designed for Mazda 3 (2.0L I4 2004-2012; 2.5L 2010-2012), Mazda 5 (2012-2013), Mazda 6 (2009-2013), and Mazda CX-7 (2010-2012), it uses a plastic and carbon steel construction for durability. Please verify the OE number before purchasing. Material: plastic + carbon steel Direct-fit replacement for listed Mazda models OE references: K5T81777, LF82-18-740, K5T46597, 4M5G9A500 Idle control function: modulates vacuum to help stabilize idle Model compatibility: Mazda 3 2.0L (2004–2012), Mazda 3 2.5L (2010–2012), Mazda 5 (2012–2013), Mazda 6 (2009–2013), Mazda CX-7 (2010–2012) Fit and installation: Direct-fit design for the listed Mazda models. Please confirm the OE number and vehicle compatibility before purchase.

Read more less

This 12V white RV air vent with fan provides active ventilation for moving vehicles. It is designed to supply fresh air to RVs, trailers, and motorhomes while on the road. Ideal for campers and travelers who need reliable roof or wall ventilation during overnight stops or hot days. Side air vent with blower fan designed for RVs, trailers, and motorhomes. 12V DC operation; current 0.3A, RPM 3000, exhaust rate 3.3 m3/min. Durable plastic housing with weatherproof and wear-resistant construction. Overall size: 205 x 185 x 70 mm; cutout 175 x 155 mm; min mounting thickness 50 mm. Color: White; wiring: red (positive) and black (negative) leads. Includes 1 vent fan and mounting screws for installation. Fit: Designed for standard 175 x 155 mm cutouts and 50 mm mounting depth.

Read more less

The 5 Piece Mini ANL Fuse Set provides compact overcurrent protection for automotive and battery-powered systems. Each fuse is color-coded by amperage for quick identification. Ideal for car, boat, and truck audio/video installations, as well as other battery-powered systems. It helps protect wiring and components by matching fuse ratings to wire size and load. 32V DC rating supports safe use in automotive and battery-powered applications. Includes five fuses: 30A Green, 40A Orange, 60A Blue, 80A Clear, 100A Purple. Corrosion-resistant body for durability in exposed or damp environments. Compact Mini ANL form simplifies installation in small fuse blocks. Designed for car, boat, and truck audio/video systems and other battery-powered equipment. Light specifications: Color-coded amperage markings aid quick identification during installation. Fit: Suitable for car, boat, and truck audio/video installations and other battery-powered systems using ANL fuses.

Read more less

Isuzu Fog Light Switch With Cable provides a practical, front-panel control option for fog lights in selected Isuzu models. The switch uses a standard plastic housing and includes a wiring cable for easy connection. It's suited for replacing a worn or missing fog-light switch or adding fog-light functionality during a retrofit. It installs into the front-panel switch hole of supported Isuzu vehicles without major modification. Front-panel installation into standard switch holes Includes wiring cable for fog-light circuit Durable plastic housing Compatibility: MU-X (2014–on); D-Max (2012–on) incl. CAB 4, SPACECAB, SPARK; CV -CROSS,HI-LANER 4 DOOR/2 DOOR Simple retrofit for fog-light control without disassembly Lightweight and compact design for dashboard fit Material: plastic. Fit: Designed for standard switch-hole front-panel mounting in supported Isuzu models.

Read more less

This fog light on/off switch is designed for Toyota models. It is a cable-free unit that fits standard switch holes and installs in the front panel. Use this switch to replace a worn or missing fog light control on compatible Toyota dashboards. It supports Camry 2018-on, Corolla 2019-on, and Auris/JP-type hatchback variants. Cable-free design for simple installation Fits standard switch holes in the front panel Made of durable plastic construction Compatibility: Camry 2018-on; Corolla 2019-on; Auris/JP hatchback 2019-on Front-panel mounting for easy access to fog control Clear alignment with the dash bezel for a neat fit Compact form to match surrounding trim Material: Plastic. Color: Not specified. Fit: Designed to fit standard Toyota front-panel switch openings for the listed models.

Read more less

This fog light on-off switch with cable is designed for select Toyota models, providing a straightforward control for fog lighting. It’s ideal for replacing a worn switch or adding fog-light control to existing dashboards in a Camry, Corolla, or Auris setup. Durable plastic construction for daily use. Includes wiring cable for simple integration to the fog-light circuit. Fits standard switch holes and front-panel openings. Compatible with Toyota Camry 2018–ON, Corolla 2019–ON, and Corolla Hatchback/Japanese type Auris 2019–ON. Easy DIY installation with basic hand tools. No software required; operates as a dedicated on-off control. Specifications: Plastic construction; comes with a cable for fog-light wiring. Fit: Designed to fit the front-panel switch hole in the listed Toyota models. This switch provides a simple, reliable option for quick repairs or occasional fog-light usage.

Read more less

This fog light on/off switch is a cable-free control designed for Mitsubishi front panels. It offers a straightforward upgrade or replacement for worn or missing switches. Ideal for DIY installations or restoring fog-light control in vehicles with standard front-panel switch holes. Cable-free design (no cable included) for a clean, simple install. Fits most standard front-panel switch holes across many Mitsubishi models. Durable plastic housing withstands daily use and heat. Easy to install as a direct replacement for worn or missing fog-light controls. Broad compatibility across models including Pajero/Montero, Lancer, ASX, Outlander, Triton/L200, Pajero Sport. Optional light specifications: Material: durable plastic; Mounting: front-panel hole; Cable: none included. Fit: Designed for Mitsubishi front panels that accept standard switch holes; verify your vehicle's switch cavity size before installation.

Read more less

This fog light on/off switch with cable is designed for Mitsubishi vehicles. The plastic switch housing is built for durable daily use and fits standard dash switch openings for straightforward installation. Ideal for restoring fog-light control on applicable Mitsubishi models or replacing a worn switch. It installs in the front panel cutout with a simple press-in fit when the hole matches standard sizes. Fits most standard dash switch openings Includes a wired cable for direct installation Durable plastic construction for long-term use Broad Mitsubishi compatibility: Pajero/Montero, Lancer, Outlander, ASX, Triton/L200, Pajero Sport Front-panel installation with minimal tools Specifications: Material: plastic. Wiring: cable included for direct installation. Color: not specified in the listing. Fit: Designed for front-panel openings that match standard sizes; suitable for Pajero/Montero, Lancer, Outlander, ASX, Triton/L200, Pajero Sport, and related variants.

Read more less

Isuzu Fog Light On/Off Button Switch Without Cable is a practical replacement for dash fog light control. It fits standard front-panel holes and is easy to install. Ideal when the original switch is missing or damaged, it restores fog light operation without rewiring. Cable-free switch module designed to fit standard dash switch holes Simple front-panel installation with basic tools Durable plastic construction for regular use Compatible with Isuzu MU-X (2014–on) and D-Max variants listed No wiring or cables included; vehicle wiring must be present Color: black; matte finish; compact size Specifications: Material: plastic; Color: black; Finish: matte. Fit: Designed to snap into standard front-panel switch holes for the listed Isuzu models. Note: This switch is a replacement component, not a full fog-light kit or wiring harness.

Read more less

These Car Rubber Cushion Pipe Clamps secure hoses, cables, and small pipes with a 1-inch opening. The stainless steel body paired with a rubber cushion protects routed lines in tight spaces. Ideal for automotive, marine, UTV, industrial, and household installations where exposure to salt, water, oil, and vibration is common. Opening size 1 inch (25 mm) fits standard hoses, cables, and pipes 304 stainless steel frame with a rubber cushion cushions content and reduces wear Resistant to salt, oxidation, water, and oil for exposed environments Rotates and bends during installation for flexible mounting in tight spaces Pack includes 10 clamps for multiple projects and quick replacements Compatible with hoses, steel pipes, and cables up to 1 inch Specifications: Size 1 inch (25 mm); Material: 304 stainless steel with rubber cushion; Quantity: 10. Fit: Suitable for hoses, cables, and small pipes with a 1 inch diameter in automotive, marine, UTV, industrial, and household installations.

Read more less

Car Rubber Cushion Pipe Clamps, 28 mm, pack of 10, for automotive use. Made with 304 stainless steel and a rubber cushion, these clamps secure hoses, pipes, and cables while dampening vibration. They resist salt, oxidation, water, and oil exposure, making them suitable for automotive, marine, UTV, industrial, and household installations. Size and material: 28 mm inner diameter; 304 stainless steel body with a rubber cushion Pack quantity: 10 clamps per pack Compatibility: hoses, steel pipes, and cables Installation: simple, adjustable; rotates and bends to fit curved routes Durability: resistant to salt, oxidation, water, and oil in automotive, marine, UTV, and industrial environments Specifications: Inner diameter 28 mm; pack of 10; material 304 stainless steel with rubber cushion. Fit: designed to accommodate hoses, pipes, and cables with an approximate 28 mm diameter.

Read more less

This 10-pack Car Rubber Cushion Pipe Clamps offers a practical, no-nonsense solution for securing hoses, cables, and small pipes with a 38 mm diameter. Built for automotive, marine, UTV, and workshop projects, these clamps protect routed lines from abrasion while reducing vibration thanks to the rubber cushion. 38 mm (1.5 in) clamp size; compatible with hoses, cables, and small pipes. Materials: 304 stainless steel body with a rubber cushion for surface protection. Corrosion and chemical resistance: handles salt, water, oil exposure and oxidation. Easy installation: simple to install and can be rotated or bent during placement. Pack contents: 10 clamps per pack. Applications: automotive, marine, industrial, household wiring, and pipe routing. Specifications: 38 mm diameter (about 1.5 in); 304 stainless steel with rubber cushion; quantity 10; fits hoses, pipes, and cables. Fit: Suitable for hoses, steel pipes, and cables up to 38 mm in diameter, for automotive, marine, and general-purpose installations.

Read more less

The Car Rubber Cushion Pipe Clamps set provides secure routing for hoses, pipes, and cables in automotive and utility installations. Each clamp pairs a stainless steel band with a rubber cushion to reduce vibration and wear. Ideal for engine bays, under dashboards, trailers, and boat interiors where movement occurs. 42 mm diameter fits common hoses and light piping. Set of 10 clamps with 42 mm (1.625 in) inner diameter. Material: 304 stainless steel band with a rubber cushion. Corrosion, salt, water and oil resistance. Multi-use: suitable for hoses, steel pipes, and cables. Simple installation with rotatable and bendable design. Rugged and reliable for automotive, marine, UTV, and industrial environments. Specifications: 304 stainless steel band with rubber cushion; 42 mm diameter; 10 pieces. Fit: Works with hoses, pipes, and cables around 42 mm diameter; compatible with common automotive and marine installations.

Read more less

The Car Rubber Cushion Pipe Clamps provide secure, straightforward mounting for hoses, cables, and small pipes. Designed for automotive, marine, UTV, industrial, and household projects, they protect routed lines while allowing flexible routing. 44 mm (1.75 in) clamp diameter suitable for hoses, cables, and pipes up to 44 mm. 304 stainless steel body with a rubber cushion to protect routed lines and dampen vibration. Pack of 10 clamps for multiple installations. Simple installation with rugged design; allows rotation and bending for flexible routing. Resistant to salt, oxidation, water, and oil exposure in harsh environments. Versatile for automotive, marine, UTV, industrial, and household projects. Specifications: Diameter 44 mm (1.75 in); material: 304 stainless steel with rubber cushion; quantity: 10. Fit: Designed to fit hoses, cables, and small pipes up to 44 mm in diameter; suitable for typical automotive, marine, and industrial layouts.

Read more less

Car Rubber Cushion Pipe Clamps provide a durable, corrosion-resistant fastening solution for automotive and related applications. Each clamp combines 304 stainless steel with a rubber cushion to protect components and reduce vibration. Ideal for securing hoses, pipes, and cables in engines, boats, ATVs, and workshop setups. 304 stainless steel with rubber cushion resists corrosion and reduces vibration. Internal diameter 48 mm (1.5 in) fits hoses, pipes, or cables up to 48 mm. Includes 10 clamps for multi-point mounting and consistent sizing. Salt, oil, water, and oxidation resistance suit harsh environments. Simple installation with easy rotation and bending for flexible routing. Suitable for automotive, marine, UTV, industrial, and household projects. Specifications: Size 48 mm (1.5 in) inner diameter. Material: 304 stainless steel with rubber cushion. Quantity: 10. Fit: Designed for hoses, pipes, and cables up to 48 mm in diameter across automotive, marine, and industrial uses.

Read more less

The 2 inch (50 mm) Car Rubber Cushion Pipe Clamps are a durable mounting solution for hoses, pipes and cables. Made from 304 stainless steel with a rubber cushion, they resist salt, oxidation, corrosion, water and oil exposure while providing a firm grip. Common use cases include securing hoses and cables along engine bays, boats, UTVs and industrial machinery. Diameter: 2 in (50 mm) Material: 304 stainless steel with rubber cushion Pack: 10 clamps Rotatable and bend-friendly for versatile mounting Resistant to salt, water, oil and oxidation Suitable for hoses, steel pipes and cables in automotive, marine, UTV, industrial and home settings Specifications — Size: 2 in (50 mm); Material: 304 stainless steel with rubber cushion; Pack: 10; Color: natural stainless; Applications: automotive, marine, UTV, industrial and household. Fit — Designed to secure hoses, pipes and cables up to 2 in (50 mm) in diameter in typical vehicle, boat and workshop layouts.

Read more less

This Push Button Start Keyless Car Button in Silver is a direct replacement part designed for everyday Mercedes-Benz use. It features a durable plastic body with a silver finish to blend with common interior trims. It's a practical choice when the original button shows wear or sticky operation, or when upgrading to a more convenient keyless start setup for daily driving. Material: durable plastic with a wear‑resistant surface Finish: silver color to match most interiors Ease of installation: simple replacement for compatible models OE references: 2215450514 / 2215450714 for cross-checking Compatibility: fits a broad range of Mercedes‑Benz models (see full list in product details) Notes: verify exact OE number and model compatibility before purchase Fit Designed to fit the Mercedes‑Benz models listed in the compatibility section. Please confirm the OE numbers 2215450514 or 2215450714 against your vehicle before purchase.

Read more less

Replace worn windshield washer nozzles with a durable replacement set designed for multiple Honda models. Made from ABS for corrosion resistance and longer life, this pair references OE part 76810S10A024. Use when your original nozzles are cracked, clogged, or spray unevenly. It installs at the front of the windshield to restore reliable spray coverage and maintain clear visibility during driving. Durable ABS construction resists corrosion and wear for a longer service life. OE reference 76810S10A024 ensures a direct fit for the listed models. Includes two nozzles for a complete front-windshield spray replacement. Compatible with Honda Civic V–VII (1992–2005), Jazz/City/Fit (2002–2008), Accord VII (2003–2008), Prelude (1997–2001), and S2000 (1999–2009). Front-windshield installation position; simple replacement with standard hand tools. Specifications: Material: ABS; OE number: 76810S10A024; Installation position: front of the windshield. Fit: Compatible with the listed Honda models and similar generations that use the OE nozzle pattern.

Read more less

This windshield washer pump is a direct replacement designed to restore your windshield spray and clear view. It supports a straightforward, plug‑and‑play installation. Ideal when washer spray becomes weak or stops; the plastic body enables reliable operation to provide consistent coverage across the windshield. Direct, plug‑and‑play replacement for the original unit Durable plastic construction with stable operation OE numbers: 85310-22080, 85310-10410, 98510-14000, 060210-1470, 060210-1480 Broad compatibility across multiple makes and models (Honda Accord 1990–1997, Civic 1988–2000, Odyssey 2000–2004; and other listed vehicles) Easy electrical connection and mounting for simple installation Maintains reliable washer spray for clear visibility in rain or grime Optional light specifications: Material — plastic. Fit and compatibility: Check the OE numbers above to confirm with your vehicle. This pump is suitable for a wide range of models, including Honda and several other makes listed in the product details.

Read more less