Auto Replacement Parts

The Car Aluminum Alloy Gasoline Fuel Check Valve is a compact, lightweight valve designed for automotive fuel systems. Made from aluminum alloy and weighing about 10 g, it provides reliable one-way flow control in tight spaces. Ideal as a replacement part for check valves, oil supply valves, and manual pumps across a range of vehicles and equipment, including Peugeot and Renault engines, motorcycles, ships, and helicopters. Material: Aluminum alloy Weight: 10 g Size options: 6, 8, 10, 12 mm outer diameter; nominal 1 mm Temperature range: -30°C to 130°C Media compatibility: Diesel, gasoline, water (not methanol) Applications: Check valves, oil pumps, oil-supply valves, and aluminum fittings of various sizes Light specifications: Nominal diameter 1 mm; size options 6–12 mm; operating temperature -30°C to 130°C. Fit and compatibility: Select the correct outer diameter to match your valve housing and aluminum fittings; suitable for Peugeot, Renault, motorcycles, ships, and helicopters' fuel systems.

Read more less

This compact rectifier is designed for Honda motorcycles, providing a stable 14.5V DC to help keep the battery charged on the road. Weighing 360g, it uses a three-phase full-wave design and lists compatibility with FH012AA and related part numbers (210660714, 21066-0022, 99999-0377, 21066-0008, 21066-0714, 21066-0744). Use on daily commutes or longer rides where electrical load from lights, GPS, and accessories may drain the battery. The rectifier converts alternator AC to DC, delivering steady output across a range of engine speeds and helping maintain reliable charging in varied riding conditions. Three-phase full-wave rectification for steady DC output. Output voltage 14.5V DC. Weight 360g. Compatible with FH012AA and the listed part numbers. Frame mounting with ventilation; include fuse protection. Fit: Compatible with listed Honda models; verify fit before installation.

Read more less

This motorcycle rectifier is a replacement part designed for everyday use in Honda MUV and TRX models. It converts AC from the stator to DC to charge the battery and power electrical systems. The unit uses a three-phase full-wave design for reliable charging in mid-range riding conditions. Ideal for routine maintenance or replacement when the original rectifier or regulator fails. It helps maintain consistent charging for daily commuting and light off-road use. Weight: 444 g Output: 14.5 V DC, 35 A (max) Configuration: Three-phase full-wave rectifier Compatibility: Honda MUV 2A 700 (2009–2013); TRX 420 FE/FM/TE/TM (2007–2013); TRX FA 420 (2009–2014); TRX FPA/FPE/FPM 420 (2009–2013) Installation notes: requires good ventilation and frame mounting for heat dissipation; avoid wires between rectifier and frame; fuse recommended between positive output and battery Specifications: Weight 444 g • Output 14.5 V DC, 35 A • Type: three-phase full-wave rectifier Fit: Suitable as a direct replacement for listed Honda MUV and TRX models; ensure proper airflow and secure mounting to the vehicle frame.

Read more less

Four-Hole Stainless Steel Hinge (103x27 mm) for cabinet doors. Made from 316 stainless steel, it resists corrosion and supports long-term use in kitchens, bathrooms, and storage furniture. Ideal for updating or repairing cabinets in homes and offices. It’s well suited for damp areas thanks to its corrosion-resistant material, and it offers reliable alignment for repeated opening and closing. Material: 316 stainless steel for corrosion resistance Size and weight: about 103 × 27 mm; weight approx 66 g Finish: rigorous workmanship with fine grinding and mirror-polished surface Mounting pattern: four-hole installation for stable attachment Compatibility: works with standard cabinet door configurations featuring a four-hole pattern Durability: designed for long-term use with consistent hinge operation Fit: designed for standard four-hole mounting on cabinet doors.

Read more less

This 316 stainless steel 60-degree square tube base is designed for marine installations. It provides a stable mounting point for square tubes on boats, with a clean, polished finish. Use cases include securing railing posts, accessory supports, or antenna mounts on ships, yachts, speedboats, and motorboats where a precise 60° angle is needed. Material: 316 stainless steel for corrosion resistance in saltwater environments. 60-degree base designed to securely mount 22mm or 25mm square tubes. Weight: approximately 215 g for 22mm; about 235 g for 25mm. Finish: fine grinding with mirror-polish for a smooth, clean appearance. Rigorous workmanship and tight tolerances support proper alignment and durability. Specifications: 22mm and 25mm size options; material 316 stainless steel; finish mirror-polished; compatible with standard square tubes. Fit: compatible with 22mm or 25mm square tubes, ensuring straightforward installation on suitable marine rails and supports.

Read more less

This automotive circuit breaker switch provides reliable over-current protection for 12–48V electrical systems in vehicles. It is suitable for safeguarding electrical devices such as winches, DC power supplies, EV chargers, motors, and other automotive equipment from fault currents. 10A current rating with a self-recovery fuse seat for quick protection cycling Voltage range 12–48V and power rating around 10W Alloy body with zinc alloy construction and bakelite insulation for heat, pressure, and corrosion resistance 14 mm wiring hole, compatible with 0 GA cables Manual reset: after a fault, return the long handle to restore power; automatic cut-off during fault Compact size about 10 × 4.3 × 4.4 cm and weight about 85 g for easy installation Specifications: Size ≈ 10 × 4.3 × 4.4 cm; weight ≈ 85 g; material: zinc alloy with bakelite insulation; wiring hole: 14 mm for 0 GA cables. Fitment: 14 mm mounting hole and 0 GA cable compatibility for straightforward installation in automotive wiring layouts.

Read more less

This Auto Bumper Plastic Repair Welding Patch Kit provides metal patches for plastic bumper repair. Each bag contains 500 patches designed for automotive use. Use it to fix cracks on bumper surfaces, both horizontal and vertical, with nail insertion and heat-assisted welding. Nail-implant patches for horizontal and vertical bumper cracks. Metal patches available in 0.6 or 0.8 mm thickness. Hot smoothing welds patches for a stronger bond and cleaner finish. Melting point around 200°C; requires compatible heat tool. Each bag includes 500 patches, about 110 g. Suitable for repairing plastic automotive bumpers in DIY or shop settings. Specifications: Material — metal; Patch thickness 0.6/0.8 mm; Melting point ~200°C; Quantity — 500 patches; Weight — ~110 g per bag. Fit: Ideal for auto body repair tasks on plastic bumpers, suitable for DIY enthusiasts and small shops.

Read more less

The Copper Automatic Tire Bleed Valve is a durable device that automatically vents excess air from SUV tires. Its copper body resists wear and corrosion, while a simple design supports reliable, everyday use. During inflation or after temperature swings, it helps maintain safe tire pressure by venting only the surplus air via a Schrader valve. It is designed for SUVs and other vehicles that use American mouth valves. Copper body provides durability and corrosion resistance Automatic bleed function relieves excess pressure on Schrader valves Compact 38 x 16 mm size and 27 g weight 360° rotatable metal joint allows easy venting direction Compatible with American mouth (Schrader) tire valves Suitable for SUV tires and everyday use Specifications: Material: Copper; Size: 38x16 mm; Weight: 27 g; Color: natural copper. Fit: Designed for standard American Schrader valve stems on SUVs.

Read more less

Automotive Relay With Indicator Light for general use provides a compact, high-current switching solution for electrical projects. Built with copper-plated contacts, it delivers reliable conduction with a visible indicator to confirm operation. Designed as a general-purpose relay, it supports high-current switching in automotive circuits and other general electrical applications where a compact, easy-to-install relay is needed. Copper-plated contacts for stronger conductivity Built-in indicator light to show coil status High current handling up to 100 A Larger contacts with high purity for reliable switching Smooth operation and easy installation Common use cases include automotive lighting circuits, power window controllers, and other general DC switching tasks where a visible status indicator helps troubleshooting. Includes: 20 pieces per box; unit weight 0.01 kg; suitable for general-purpose relay usage. Fit: designed to work in general-purpose relay slots used in automotive and other general electrical installations.

Read more less

The CB2 Auto Circuit Breaker Switch for Car, RV, and Yacht Audio provides automatic overload protection for 12–48V electrical systems. Its compact 84 × 56 × 43 mm footprint fits tight installations without bulk. Ideal for safeguarding car audio amplifiers, RV power runs, and yacht entertainment lines from excessive current. It features a self-recovery fuse holder with a manual power-off option for maintenance or resets. 60A nominal rating (also offered in 30A–300A variants) for mid- to high-current circuits. Self-recovery fuse holder with manual power-off via a red oval button. Polycarbonate waterproof shell; Bakelite internal parts resist heat and corrosion. High-sensitivity protection quickly disconnects on overload to protect connected devices. Rated voltage 12–48V; maximum power about 10W; compact design. Dimensions: 84 × 56 × 43 mm; weight ~120 g. Fits inline in car audio or large electrical circuits in vehicles, RVs, or yachts. Simple installation supports safe operation in exposed environments.

Read more less

Vehicle Ultrasonic Mouse Repeller For Cars Everyday Use is a compact 12V device powered directly from your car battery, avoiding the need for extra power supplies. It integrates safety features and power management for unattended use. Designed for vehicles that sit idle, such as cars, trucks, caravans, or service vans. It activates when the engine runs and enters standby when parked for longer periods. 12V DC from the vehicle battery; no external supply required. Power-on self-test checks red/white LEDs and transmitter. Low-battery protection with an alarm when voltage drops below 9.2V. Variable frequency output with sweep and fixed modes (12–25 kHz). White LED indicator flashes during operation. Vibration detection pauses during motion; resumes after 5 minutes idle. Covers up to 40 m2; size 8.5×8.1×4.1 cm; 78 g. Fit Compatible with standard 12V car electrical systems. Its compact form fits discreetly under a dash, in a glove box, or near the console for easy installation.

Read more less

Car Slice Fuse Holder for Fuse Box, 10-pack set designed for everyday automotive use in 24V systems. Each unit accepts standard fuses up to 30A and features durable copper contacts for reliable connections. Ideal for maintenance, roadside repairs, and DIY electrical projects in cars, trucks, and equipment with 24V power. The two-hole wiring harness is waterproof and dustproof, with copper pins and seals that resist corrosion and moisture. Current rating: 30A at 24V Two-hole wiring harness with waterproof and dustproof seals All-copper pins, copper coil, and thickened copper inserts with locking feet Direct fuse pin socket for quick plugging and replacement High-temperature nylon storage box with slow-melting safety film Wire length about 20 cm; compact routing and easy mounting Specifications: Wire length ~20 cm per unit; 24V operation; 30A max per fuse holder. Pack: 10 units in a set. Fit: Compatible with standard automotive fuse boxes and blade-type fuses rated for 30A; check your vehicle's fuse layout before installation.

Read more less

The Car Waterproof Connector Set With Copper Contacts For Wiring provides a durable, weather-resistant solution for 12V automotive electrical connections. Designed for 12V systems, it suits under-hood wiring, trailer connections, and other environments where moisture and dust are concerns. Nylon housing delivers high mechanical strength, wear resistance, and self-lubricating properties for repeated mating. Flame-retardant shell with sealing rubber ring enables secure installation and helps keep out moisture. Copper contact terminals resist oxidation, delivering stable conductivity over time. External collar provides waterproof and dustproof sealing around the connection. Rated 32A and 12V operation align with common automotive wiring requirements. Rubber insulation minimizes vibration impact and offers flexible, secure insulation. Fit: Suitable for standard 12V automotive wiring harnesses; verify connector type and mating compatibility before installation.

Read more less

Sheng En Di Lithium Battery Charge And Discharge Connector is a compact, two-pin AC/DC connector designed for LiFePO4 battery charging and discharging. Ideal in workshops or field projects, it provides a robust connection for high-current battery packs where a color-matched, gender-free interface simplifies pairing and reduces orientation errors. High-current capability: 50A at up to 600V for LiFePO4 charging and discharging. 2-pin design with copper contacts plated with silver for reliable conduction. Insulator material PC UL94V-05 offers flame retardancy. Color-matched, gender-free design for flexible pairing, regardless of plug orientation. Injection-molded housing with fire-retardant construction. Compact size 48.2 × 35 × 16 mm for easy installation. Specifications (light): Size 48.2 × 35 × 16 mm. Insulator: PC UL94V-05. Contacts: copper plating with silver. Current rating: 50 A, Voltage: 600 V. Flame retardant grade: V08. Fit: Designed for LiFePO4 battery charge/discharge systems using a 2-pin, color-matched interface, offering a secure connection in moderate vibration environments.

Read more less

Luminous Tire Valve Caps are a 4-piece set designed for cars and motorcycles, delivering a compact, practical upgrade to standard valve caps. Made from ABS, they resist corrosion and wear while offering a subtle luminous display for low-light visibility. Suitable for cars, motorcycles, and bicycles with standard valve stems. They protect against dirt and leaks, and the glow helps locate valves at night. Material: ABS; Size: approx 1.2 x 1.6 mm per cap Design: Mini, compact, low-profile Luminous display: visible in low light Durability: corrosion-resistant, anti-leakage Grip: anti-skid for easy installation Quantity: 4 caps; fits standard valve stems Fit: Designed for standard tire valve stems on most cars and motorcycles. Four caps are included to cover multiple wheels.

Read more less

Skull Luminous Valve Cap Set for Cars, Motorcycles and Bicycles. This compact ABS cap set installs quickly on standard tire valve stems, delivering a secure fit and a distinctive look. At night or in dim conditions, the glowing skull aids valve location and adds a subtle, personal touch to your ride. Eye-catching skull design for quick identification Luminous night glow with extended duration ABS plastic construction for durability and environmental friendliness Fits standard tire valve stems on cars, motorcycles, and bicycles Size about 1.6 x 1.2 cm per cap; set weight ~17 g (4 pcs) Easy, tool-free installation with secure thread-on fit Light specifications: Glow occurs in low light; glow duration varies with ambient light exposure. Fit: Compatible with most standard tire valve caps on cars, motorcycles, and bicycles.

Read more less

This universal car shock absorber rubber spring is designed to dampen road disturbances and stabilize the chassis. Made from rubber, it buffers impacts and helps maintain control on uneven surfaces. Ideal for daily commuting on city streets and roads with potholes, and for light off-road use. It aims to reduce vibration and noise caused by rough pavement and sharp turns. Rubber construction for dependable damping Enhances buffering and stability on bumpy roads Reduces vibration and road noise from irregular surfaces Slightly increases ride height to tackle obstacles Shields shocks and suspension components Universal fit for most vehicle models Multiple section options (A/A+ to E) with varied diameters and weights Light specifications — Available in sections A/A+ through E; diameters range about 112–173 mm, thickness about 9–13 mm, weights about 315–1,467 g. Fit — Designed for universal compatibility; select the section that matches your suspension dimensions before installation.

Read more less

The Car Emergency Starter Cable with Large Clip for Battery Connection is a 12V jump-start lead designed for quick, safe power transfer during roadside emergencies. It features an EC5 female connector and an anti-reverse plug to help protect your vehicle's electrical system while starting from a donor battery. Use it to jump-start a dead battery or to supply power to a 12V device from a donor battery in emergencies. The color-coded clips simplify correct polarity during urgent starts. 12V output with EC5 female connector for common jump-start setups Anti-reverse connection plug to prevent incorrect wiring Red positive clip and black negative clip; round tip is negative, half-round is positive Thickened steel spring for durable clamping and reliable long-term use Cable length 320 mm and weight 113 g with lightweight plastic housing Fit: Designed for standard 12V automotive batteries with typical terminal sizes and clamps.

Read more less

This high‑pressure valve core disassembly tool is built for automotive air conditioning systems. Brass valve body and aluminum knob enable reliable manual operation. Use it to remove and install valve cores in R134A A/C lines during maintenance, repair, or retrofit work. The straight‑through design keeps the core accessible under pressure. Durable construction: Brass valve body and aluminum knob for corrosion‑resistant reliability Standard compatibility: R134A interface with front bayonet connection for quick attachment Precise operation: Snap‑on spool control and manual stem drive Easy access under pressure: Straight‑through core design High‑pressure tolerance: 45 bar maximum pressure for common automotive A/C systems Compact and reachable: 194 g weight; 61.5 mm adjustable probe distance Specifications: Weight 194 g; Probe distance 61.5 mm; Material: brass body; Knob: aluminum alloy; Interface: R134A standard; Connection: front bayonet; Pressure bearing: 45 bar. Fit: Designed for standard front bayonet valve cores used in most automotive A/C systems.

Read more less

Alligator Clips for car battery charging, 75mm length, provide a practical connection option for charging and testing setups. Constructed with zinc alloy contacts, these clips are designed for reliable lead connections in automotive applications. Use them to attach a charger lead to a car battery, conduct charging current, or connect a power tester. The 75 mm length (63 mm clip) helps reach battery terminals in crowded engine bays while keeping a secure grip. Material: zinc alloy contact surfaces Current rating: 20A Length with cover: 75 mm; clip length: 63 mm Weight: 8 g Applications: car battery charging connection, charging conduction, power tester connection Color: shipped in a random color Lightweight design at 8 g makes it easy to handle during quick battery checks. Fit: Designed to fit standard car battery charging connections and power tester leads.

Read more less

Mushroom Head Air Filter for Cars offers a simple, universal solution for improving air intake in a variety of vehicles. Designed for easy installation and maintenance, it supports steady airflow in engines that use mushroom-style, 51/55/60mm intake fittings. Ideal for replacement during routine maintenance or when upgrading stock filters. It does not require special tools and can be swapped during standard service intervals. Non-woven filtration media for reliable particle capture. Universal sizing fits 51mm, 55mm, and 60mm mushroom head intakes. Reduces intake air resistance while supporting airflow and volumetric efficiency. Simple, tool-free installation for quick upgrades. Durable construction with long service life for recurring use. Specifications: Material: non-woven. Fits 51mm/55mm/60mm mushroom head air intakes. Universal compatibility across many car models. Fit: Universal compatibility with 51mm, 55mm, and 60mm mushroom head intake housings.

Read more less

Car Universal Battery Bracket With Adjustable Base Tray provides a practical mounting solution for a variety of automotive batteries. The design emphasizes adjustable fit, straightforward installation, and stable support in everyday use. Ideal for battery replacement projects, DIY installations, or temporary setups where a secure, level tray helps prevent movement and vibration. Adjustable width to fit a wide range of battery sizes, from compact to mid-size automotive batteries Compact, portable design for easy handling and storage in tight engine bays Simple installation with standard mounting points and straightforward securing methods Durable frame built to withstand regular vibration and road conditions Practical base tray keeps the battery level and stable during operation Broad compatibility with most common automotive battery sizes and layouts Fit: designed to fit a broad range of vehicles thanks to the adjustable base width.

Read more less

Car DC Breaker with Waterproof Cover is a compact protection device designed for vehicle electronics. It mounts in a 3/8 inch round hole and is sealed with a durable waterproof cover for use in automotive, industrial, and marine applications. This breaker protects power feeds to dashboards, lighting, and auxiliary circuits from overloads and short circuits. The plastic housing resists typical environmental conditions found in vehicles and boats. Mounting size: fits 3/8 inch (10 mm) round holes Voltage rating: 50 V DC Current options: 5 A, 10 A, 15 A, 20 A, 30 A Material and enclosure: durable plastic body with waterproof cover Applications: automotive, industrial equipment, marine electronics Easy installation: simple inline wiring and quick replacement Specifications: 50 V DC rating; current options 5 A–30 A; plastic housing with a waterproof cover. Fit: Designed for 3/8 inch mounting holes and DC circuits up to 50 V.

Read more less

The Car Window Lift Switch Button is a 20 x 15 mm replacement part designed for Mercedes-Benz vehicles. Made from ABS+PC, it offers a durable, comfortable, seamless feel. Ideal for replacing a worn, cracked, or missing window switch button in compatible Mercedes-Benz door panels. The compact size fits standard 20 x 15 mm modules and keeps the control area clean and functional. Size: 20 x 15 mm; Weight: 3 g Material: ABS + PC for long-lasting wear Finish and feel: smooth, tactile surface for confident operation Easy installation: simple swap-in design without tools Compatibility: Mercedes-Benz window lift switches that use 20 x 15 mm buttons Fit: compatible with Mercedes-Benz models that use a 20 x 15 mm window switch button module. Note: This is a replacement part and not an original equipment manufacturer item.

Read more less