Auto

Vehicle Ultrasonic Mouse Repeller For Cars Everyday Use is a compact 12V device powered directly from your car battery, avoiding the need for extra power supplies. It integrates safety features and power management for unattended use. Designed for vehicles that sit idle, such as cars, trucks, caravans, or service vans. It activates when the engine runs and enters standby when parked for longer periods. 12V DC from the vehicle battery; no external supply required. Power-on self-test checks red/white LEDs and transmitter. Low-battery protection with an alarm when voltage drops below 9.2V. Variable frequency output with sweep and fixed modes (12–25 kHz). White LED indicator flashes during operation. Vibration detection pauses during motion; resumes after 5 minutes idle. Covers up to 40 m2; size 8.5×8.1×4.1 cm; 78 g. Fit Compatible with standard 12V car electrical systems. Its compact form fits discreetly under a dash, in a glove box, or near the console for easy installation.

Read more less

The CB2 Auto Circuit Breaker Switch for Car, RV, and Yacht Audio provides automatic overload protection for 12–48V electrical systems. Its compact 84 × 56 × 43 mm footprint fits tight installations without bulk. Ideal for safeguarding car audio amplifiers, RV power runs, and yacht entertainment lines from excessive current. It features a self-recovery fuse holder with a manual power-off option for maintenance or resets. 60A nominal rating (also offered in 30A–300A variants) for mid- to high-current circuits. Self-recovery fuse holder with manual power-off via a red oval button. Polycarbonate waterproof shell; Bakelite internal parts resist heat and corrosion. High-sensitivity protection quickly disconnects on overload to protect connected devices. Rated voltage 12–48V; maximum power about 10W; compact design. Dimensions: 84 × 56 × 43 mm; weight ~120 g. Fits inline in car audio or large electrical circuits in vehicles, RVs, or yachts. Simple installation supports safe operation in exposed environments.

Read more less

Automotive Relay With Indicator Light for general use provides a compact, high-current switching solution for electrical projects. Built with copper-plated contacts, it delivers reliable conduction with a visible indicator to confirm operation. Designed as a general-purpose relay, it supports high-current switching in automotive circuits and other general electrical applications where a compact, easy-to-install relay is needed. Copper-plated contacts for stronger conductivity Built-in indicator light to show coil status High current handling up to 100 A Larger contacts with high purity for reliable switching Smooth operation and easy installation Common use cases include automotive lighting circuits, power window controllers, and other general DC switching tasks where a visible status indicator helps troubleshooting. Includes: 20 pieces per box; unit weight 0.01 kg; suitable for general-purpose relay usage. Fit: designed to work in general-purpose relay slots used in automotive and other general electrical installations.

Read more less

The Copper Automatic Tire Bleed Valve is a durable device that automatically vents excess air from SUV tires. Its copper body resists wear and corrosion, while a simple design supports reliable, everyday use. During inflation or after temperature swings, it helps maintain safe tire pressure by venting only the surplus air via a Schrader valve. It is designed for SUVs and other vehicles that use American mouth valves. Copper body provides durability and corrosion resistance Automatic bleed function relieves excess pressure on Schrader valves Compact 38 x 16 mm size and 27 g weight 360° rotatable metal joint allows easy venting direction Compatible with American mouth (Schrader) tire valves Suitable for SUV tires and everyday use Specifications: Material: Copper; Size: 38x16 mm; Weight: 27 g; Color: natural copper. Fit: Designed for standard American Schrader valve stems on SUVs.

Read more less

This Auto Bumper Plastic Repair Welding Patch Kit provides metal patches for plastic bumper repair. Each bag contains 500 patches designed for automotive use. Use it to fix cracks on bumper surfaces, both horizontal and vertical, with nail insertion and heat-assisted welding. Nail-implant patches for horizontal and vertical bumper cracks. Metal patches available in 0.6 or 0.8 mm thickness. Hot smoothing welds patches for a stronger bond and cleaner finish. Melting point around 200°C; requires compatible heat tool. Each bag includes 500 patches, about 110 g. Suitable for repairing plastic automotive bumpers in DIY or shop settings. Specifications: Material — metal; Patch thickness 0.6/0.8 mm; Melting point ~200°C; Quantity — 500 patches; Weight — ~110 g per bag. Fit: Ideal for auto body repair tasks on plastic bumpers, suitable for DIY enthusiasts and small shops.

Read more less

This automotive circuit breaker switch provides reliable over-current protection for 12–48V electrical systems in vehicles. It is suitable for safeguarding electrical devices such as winches, DC power supplies, EV chargers, motors, and other automotive equipment from fault currents. 10A current rating with a self-recovery fuse seat for quick protection cycling Voltage range 12–48V and power rating around 10W Alloy body with zinc alloy construction and bakelite insulation for heat, pressure, and corrosion resistance 14 mm wiring hole, compatible with 0 GA cables Manual reset: after a fault, return the long handle to restore power; automatic cut-off during fault Compact size about 10 × 4.3 × 4.4 cm and weight about 85 g for easy installation Specifications: Size ≈ 10 × 4.3 × 4.4 cm; weight ≈ 85 g; material: zinc alloy with bakelite insulation; wiring hole: 14 mm for 0 GA cables. Fitment: 14 mm mounting hole and 0 GA cable compatibility for straightforward installation in automotive wiring layouts.

Read more less

This 316 stainless steel 60-degree square tube base is designed for marine installations. It provides a stable mounting point for square tubes on boats, with a clean, polished finish. Use cases include securing railing posts, accessory supports, or antenna mounts on ships, yachts, speedboats, and motorboats where a precise 60° angle is needed. Material: 316 stainless steel for corrosion resistance in saltwater environments. 60-degree base designed to securely mount 22mm or 25mm square tubes. Weight: approximately 215 g for 22mm; about 235 g for 25mm. Finish: fine grinding with mirror-polish for a smooth, clean appearance. Rigorous workmanship and tight tolerances support proper alignment and durability. Specifications: 22mm and 25mm size options; material 316 stainless steel; finish mirror-polished; compatible with standard square tubes. Fit: compatible with 22mm or 25mm square tubes, ensuring straightforward installation on suitable marine rails and supports.

Read more less

The RV Power Distribution Terminal Block With Cover M8 and M10 Studs is a compact, 48V DC power distribution hub designed to organize and protect wiring in vehicles and boats. It consolidates multiple feeds into a single block, helping cable management in engine bays, cabins, and compartments. M8 and M10 stud connections; 62.5A per stud; total 250A rating ABS body with zinc alloy hardware and brass terminals; protective cover included 48V DC maximum operating voltage; suitable for automotive, RV, and marine power systems Auxiliary terminal screw rated at 20A for easy branching Designed to organize wiring harnesses and shield terminals from dust and moisture Light specifications (optional): Details provided focus on materials and electrical ratings; no additional lighting features. Fit: Compatible with M8 and M10 stud connections; applicable to 48V power distribution in cars, campers, boats, and yachts.

Read more less

This Car Battery Inverter Cable with a 50 cm copper conductor is designed for reliable power connections in automotive and off-grid setups. Tin-coated lugs resist corrosion and a closed-end design adds durability in exposed engine compartments. Use this cable to connect a battery to an inverter, charger, or power distribution point in cars, trucks, boats, solar energy systems, or ATVs. The PVC+Copper construction, polyolefin heat shrink, and insulating wrap help maintain stable electrical performance across temperature changes. Copper conductor with tin-coated lugs for corrosion resistance Closed-end lug design protects against moisture and corrosion Polyolefin heat shrink tubing forms a tight protective seal Insulated with high-quality material to maintain stable conductivity Length: 50 cm; temperature range -40 to +125 C; material: PVC + copper Compatible with car, truck, ship, battery systems, solar energy, ATV setups Fit: Compatible with standard automotive battery terminals and common inverter inputs.

Read more less

Four-Hole Stainless Steel Hinge (103x27 mm) for cabinet doors. Made from 316 stainless steel, it resists corrosion and supports long-term use in kitchens, bathrooms, and storage furniture. Ideal for updating or repairing cabinets in homes and offices. It’s well suited for damp areas thanks to its corrosion-resistant material, and it offers reliable alignment for repeated opening and closing. Material: 316 stainless steel for corrosion resistance Size and weight: about 103 × 27 mm; weight approx 66 g Finish: rigorous workmanship with fine grinding and mirror-polished surface Mounting pattern: four-hole installation for stable attachment Compatibility: works with standard cabinet door configurations featuring a four-hole pattern Durability: designed for long-term use with consistent hinge operation Fit: designed for standard four-hole mounting on cabinet doors.

Read more less

The Car Aluminum Alloy Gasoline Fuel Check Valve is a compact, lightweight valve designed for automotive fuel systems. Made from aluminum alloy and weighing about 10 g, it provides reliable one-way flow control in tight spaces. Ideal as a replacement part for check valves, oil supply valves, and manual pumps across a range of vehicles and equipment, including Peugeot and Renault engines, motorcycles, ships, and helicopters. Material: Aluminum alloy Weight: 10 g Size options: 6, 8, 10, 12 mm outer diameter; nominal 1 mm Temperature range: -30°C to 130°C Media compatibility: Diesel, gasoline, water (not methanol) Applications: Check valves, oil pumps, oil-supply valves, and aluminum fittings of various sizes Light specifications: Nominal diameter 1 mm; size options 6–12 mm; operating temperature -30°C to 130°C. Fit and compatibility: Select the correct outer diameter to match your valve housing and aluminum fittings; suitable for Peugeot, Renault, motorcycles, ships, and helicopters' fuel systems.

Read more less

Manual Fuel Pump with Check Valve offers a compact, hand-operated tool for onboard oil and fuel transfer. At about 15.4 x 4.6 cm, it fits tight spaces and common hose sizes. Use it to prime or top up oil and fuel for outboard engines, boats, motorcycles, and compact vehicles. It supports both diesel and gasoline fuels. Hand-operated pump provides controlled flow Universal hose connection for 6 mm to 12 mm diameters Integrated check valve reduces backflow during filling Suitable for diesel and gasoline fuels Lightweight, portable design for on-board use Compatible with automobiles, motorcycles, ships, and small engines Specifications: Size 15.4 x 4.6 cm; hose compatibility 6–12 mm. Fit: Works with common onboard oil and fuel systems, including outboard engine setups and portable tanks.

Read more less

This Left-Drive Car Coat Hook Hanger is built from durable ABS plastic for reliable strength in a compact size. Its dimensions are 61 x 55 x 40 mm and it weighs about 20.4 g, making it unobtrusive inside the vehicle. Use it to organize small items on Volvo SUVs, such as keys, cables, masks, or compact bags. No drilling or tools are required for installation, and the hook can be added to existing panels to reduce clutter and keep the cabin tidy. Material: ABS plastic for durability Size: 61 × 55 × 40 mm; Weight: 20.4 g Multi-purpose: hangs clothes, bags, and sundries Installation: no drilling or tools required Left-drive design: harmony with Volvo interiors Compatibility: fits Volvo XC60, XC90, S90, V90, XC405 Specs at a glance: Material ABS; Size 61 × 55 × 40 mm; Weight 20.4 g; Left-drive design for Volvo SUVs. Fit: Designed to fit Volvo XC60, XC90, S90, V90, XC405 without drilling.

Read more less

This left-side air outlet paddle replacement is designed to restore the interior vent control in compatible vehicles. It matches the original size and mounting for a clean, unobtrusive look. Ideal when the paddle has cracked, sticks, or detached from the vent, helping you direct airflow without replacing the entire vent assembly. Material: PC+ABS construction for durability and impact resistance Original-size design: exact mounting points and smooth toggle operation Left-side orientation: specifically shaped for the left air outlet on Sagitar 06-11 Reinforced card position: provides a stronger, wear-resistant fit Easy installation: drops into the existing vent slot with no modification Specifications — Material: PC+ABS. — Compatibility: Volkswagen Sagitar 06-11. — Orientation: Left side. — Size: Original size to match factory fit. Fit — Left air outlet paddle replacement designed to fit the Volkswagen Sagitar 06-11, aligning with the vehicle's original mounting points for reliable operation.

Read more less

Direct-fit driver-side air vent paddle replacement for the Volkswagen Lavida (2008–2012). This part mirrors the original size for a stable, durable fit inside the dash vent. Use case: Replace a cracked, loose, or hard-to-operate driver-side vent paddle and restore reliable airflow control and dash aesthetics. Material: PC+ABS for durability and temperature resistance Fit: original size, direct-fit replacement that aligns with the vent assembly Operation: smooth toggle action to adjust airflow without sticking Durability: reinforced card position and wear-resistant construction Compatibility: designed specifically for Volkswagen Lavida 2008–2012 Finish: OEM-like surface that blends with the interior trim Light specifications: made from PC+ABS; suitable for standard dash temperatures and typical interior climates; color and finish align with standard Lavida interiors. Fit statement: Driver-side air vent paddle intended for Volkswagen Lavida models from 2008 through 2012; ensures proper mounting points and lever alignment for a secure replacement.

Read more less

This interior door handle cover is a direct replacement for the left-front handle on Toyota Camry models from 2006–2011. It helps restore the interior finish after wear, scratches, or daily use, providing a practical cosmetic upgrade without removing the door panel. Durable ABS+PC construction with an electroplated, wear-resistant finish. Direct-fit design with OE reference 74646-060805 for Camry left-front doors (2006–2011). Buckle reinforcement enables tool-free installation and secure seating. Metallic electroplated coating offers a refreshed look while resisting minor scratches. Finish aligns with typical Camry interior trims and maintains color consistency across batches. Specifications: Material: ABS+PC; Finish: electroplated; Fits Toyota Camry 2006–2011 left-front interior door handle. Fit: Designed to align with the Camry left-front door handle opening and mounting points, compatible with OE reference 74646-060805.

Read more less

This gear shift button cover is designed for left-drive Land Rover, Range Rover, and Jaguar F-TYPE interiors. It offers a slim, protective cap that fits over the existing shift button to help reduce wear. Use it to maintain the button’s appearance during daily use, especially in tight cabins where frequent contact occurs or when sharing the vehicle with multiple drivers. Anti-scratch edge protects the button and fingers from wear Durable ABS and PC material resists scratches, dirt, and corrosion Size: 20 × 10 mm; cover cap only, no extra parts required Direct-fit installation with no modifications needed Low-profile design preserves interior aesthetics Compatible with Land Rover, Range Rover, and Jaguar F-TYPE (2010–2016) left-drive models Specifications: Material – ABS and PC; Size – 20x10 mm; Type – cover cap only; Finish – standard. Fit: Suitable for Land Rover, Range Rover, and Jaguar F-TYPE models from 2010 to 2016 with left-drive configuration.

Read more less

Streamline inflation for your inflatable water gear with the Surfing Paddle Board Air Valve Adapter. It connects a standard air pump to paddle boards and other inflatables with a secure, leak-resistant fit. Designed for SUPs, assault boats, and rubber boats, it lets you inflate using a common car tire pump or any ordinary air pump. No specialized equipment is required. Reinforced nylon body with alloy/plastic components for durability Universal compatibility with SUPs, assault boats, and rubber boats Quick changeover and easy connection to standard air pumps Dust cover protects the valve and helps prevent blockages Lightweight and compact: 0.06 kg; Ø35 mm diameter, 80 mm height Threaded fitting resists loosening and wear for long-term use Specifications: color Black/Orange; weight 0.06 kg; diameter 35 mm; height 80 mm. Fit note: Compatible with most inflatable valve types that use standard threads; verify valve compatibility before use.

Read more less

This air outlet paddle is designed to replace a worn or damaged piece in the Porsche Cayenne center console. It is manufactured to the original size to ensure a precise fit and smooth operation in the 2010–2016 models. Use this replacement when the paddle feels loose, sticks, or shows visible wear, helping restore direct control over airflow without modifying other components. Original-size design matches the Cayenne air outlet paddle for 2010–2016 PC+ABS material provides durable, heat-resistant performance Smooth toggle action aligns with the original mechanism Reinforced card position resists wear, cracking, and loosening OE reference 7P5 819 727 confirms accurate replacement Reuses existing mounting points for straightforward replacement Specifications: Material PC+ABS; OE reference 7P5 819 727; fits Porsche Cayenne 2010–2016. Fit: Porsche Cayenne 2010–2016 center console air outlet paddle.

Read more less

Replace the right rear platform cover on BMW 3 Series E93 with this direct-fit replacement. It mirrors the OEM design for a balanced, functional cargo area. Ideal after cargo loading or trim damage, providing a solid, stable surface for mats and gear. The part aligns with factory mounting and maintains even edge lines across the platform. Direct replacement for the right rear platform cover on BMW 3 Series E93 ABS plastic with aluminum alloy reinforcement for durability and lighter weight Original-position design with reinforced gear to resist breakage Simple, tool-light installation using existing mounting points Maintains OEM-like fit and finish in the cargo area Lightweight design aids handling during installation. Fit: BMW 3 Series E93 models (convertible).

Read more less

Direct replacement glove box handle switch for Mercedes-Benz CLS-class models. This part is designed for plug‑and‑play installation with no cutting or splicing required, helping restore the original feel of the glove box operation. Ideal when the existing switch is worn, cracked, or unresponsive, allowing you to open and close the glove box reliably while maintaining the vehicle's interior appearance. Direct replacement for CLS-class glove box handle switch Easy installation; no modification needed Preinstalled connector; no cutting or splicing Durable ABS + PC construction Size: 120 x 50 mm; Weight: 47.5 g Compatibility: Mercedes-Benz CLS-class models Material features: ABS and PC offer a sturdy, lightweight component with a consistent finish suitable for typical interior trim tones. Fit: Specifically shaped for the glove box area in CLS-class interiors. Verify model year compatibility to ensure proper fit.

Read more less

The Universal Car Plastic Fasteners Rivet Clips Set includes 100 plastic clips designed to replace worn or damaged fasteners on various vehicle surfaces. Made from durable plastic, these universal clips are intended for use on license plates, fenders, bumpers, interior panels, doors, and other car surfaces. They offer a practical, no-fuss solution for reattaching trim components. Use-case: Ideal for DIY repairs when replacing lost clips during panel removal or trim reattachment, ensuring surfaces stay secure without gaps. 100 pieces included Universal plastic rivet clips for cars Suitable for license plates, fenders, bumpers, interior panels, and doors Durable plastic construction with long service life Lightweight and corrosion resistant Specifications: Plastic material; 100 pieces; universal type. Fit: Universal type designed to fit many car models; verify the original fastener size to ensure compatibility.

Read more less

Designed for everyday driving, this brake pedal combines metal construction with practical features to support safer braking. The anti-skid surface and enlarged pedal area are designed to improve grip and control during routine stops. Ideal for daily commuting and city trips, the pedal's durable metal build withstands regular use, while the textured surface helps maintain foot traction in wet or slick conditions. The enlarged pedal area provides more surface contact for confident braking. Material: metal construction for durability Anti-skid, textured surface for reliable grip Enlarged pedal area increases contact and control Exquisite workmanship with a unique design Designed for standard car brake pedal installations Specifications: Material - metal; Finish - anti-skid surface; Pedal area enlarged for improved control. Fit: Designed to fit typical car brake pedal assemblies found in many passenger vehicles.

Read more less

This MC4 to Anderson battery charging cable is designed for mobile energy storage systems that use MC4 solar connectors on one end and Anderson 30A power contacts on the other. It provides a reliable link for portable battery packs in compact setups. Common use is charging or replenishing portable energy stores from solar arrays or other DC sources, where a 1.0 m run is needed to keep cables tidy and organized. Connection types: MC4 2-pin on the MC4 end and Anderson 30A on the opposite end Conductor material: pure copper with 3.31 mm² cross-section (approx. AWG 12) Insulation and sheath: environmentally friendly PVC with 0.8 mm insulation thickness Electrical ratings: 36 V nominal, 30 A current, up to 360 W Length and weight: 1.0 m long; about 107 g; 2x12 AWG Compatibility: suitable for 30A Anderson‑compatible mobile energy storage equipment Key specs: length 1.0 m, copper conductors, PVC insulation and sheath, 36 V, 30 A, 360 W. Fit: Designed to fit devices using 30A Anderson connections for mobile energy storage systems.

Read more less