Auto

The 2 Pack Eagle Eye Car Fog Lights provide clearer night visibility with energy-efficient LEDs. Designed for easy installation, they feature a slim profile and an adjustable bracket that fits a range of vehicles. Ideal for foggy roads, rain, or low-light conditions, these lights deliver white illumination when driving straight and activate a yellow signal during turns. They are designed for front-end lighting and can enhance visibility in challenging weather. Energy-efficient LED technology reduces power consumption White driving light with yellow turn signal for clear signaling Slim, low-profile housing and adjustable mounting bracket Easy installation on standard fog-light assemblies Long-life LEDs support frequent use with minimal maintenance Pack includes two lamps for a coordinated install Specifications: Pack size 2; Color output white (driving) and yellow (turn signal); Mounting: adjustable bracket; Compatibility: designed for vehicles with standard fog-light mounting points. Fit: The adjustable bracket and slim design enable installation across a broad range of vehicle models.

Read more less

2 Pack T10 Car Clearance Lights provide a practical lighting upgrade for everyday vehicles. These compact lights are designed for reliable clearance and side-marker use on body panels and undercarriage areas. Use them on trailers, trucks, vans, or utility vehicles that need clear visibility along the sides or rear. They install quickly in standard T10 sockets, offering a straightforward upgrade without complex wiring. 2-pack set for two locations or spares T10 wedge-base compatibility with common housings Low power consumption and long service life Shock-resistant housing withstands road vibration Brighter illumination with stable low-temperature operation Simple plug-and-play installation in minutes Light specifications: 2-pack, standard T10 base, suitable for automotive lighting installations. Color and exact voltage depend on the vehicle’s electrical system. Fit: Compatible with vehicles that use standard T10 clearance light sockets. Check your existing fittings before purchasing.

Read more less

This Car Third Brake Light features 18 red LEDs for 12V vehicles, providing a clear, consistent brake signal. Ideal for upgrading worn or damaged third brake lights, or for aftermarket installations in older cars. It is designed to be adjustable to fit a wide range of vehicles. 18 high-brightness LEDs deliver steady illumination Adjustable angle enables alignment in varied rear profiles Easy to install and remove; fits standard third brake light housings Durable, waterproof enclosure for outdoor conditions Low power consumption with efficient LED technology Red color matches existing brake light patterns Specifications: Color — Red; LEDs — 18; Voltage — 12V DC; Waterproof housing; Material — durable construction Fit: Suitable for most 12V vehicles with standard third brake light wiring and mounting points; some vehicles may require minor wiring or mounting adjustments.

Read more less

This Car Third Brake Light uses 18 LEDs to provide clear rear signaling for your vehicle. It’s suitable as a replacement for a damaged third brake light or as an upgrade to improve visibility during daily driving. 18 high-brightness LEDs deliver consistent illumination across the full width of the light. Adjustable mounting angle helps you align the beam to your vehicle’s design. Easy installation and removal using existing mounting points, with a secure fit. Weatherproof construction ensures operation in rain, dust, and temperature changes. Low power consumption with long service life reduces drain on the electrical system. Primarily uses the brake light circuit, with compatibility for backup light integration. Specifications: 18 LEDs; low power draw; weatherproof housing; adjustable mounting angle. Fit: Designed to fit most vehicles with a standard third brake light housing; verify clearance and fitment for your model before installation.

Read more less

These Car Headlight Silicone Dust Cover Caps are designed to seal headlight and fog light bulb openings. Made of silicone, they replace the original seal cap and help protect the bulb area from moisture and contaminants. Ideal when upgrading to aftermarket bulbs (Xenon, Bi-Xenon) without altering the housing. The cap plugs into 8 cm inner-diameter housings, reducing exposure to dirt while you service or replace bulbs. Material: Silicone rubber with durable seal Size: 8 cm inner diameter; overall dimensions 8 x 8 x 5.6 cm Replacement role: replaces the original bulb seal cap Compatibility: designed for 8 cm inner diameter light housings; suitable for headlight and fog light assemblies Protection: prevents water, dust, and moisture ingress Installation: easy to install with aftermarket bulbs; no housing modification needed Light specifications: fits 8 cm inner diameter housing; can accommodate aftermarket Xenon/Bi-Xenon bulbs without modification. Fit: compatible with headlight and fog light housings that have an 8 cm inner diameter.

Read more less

The 4-Inch 15W Round LED Car Work Light is a compact, durable lighting option for cars and SUVs. With a die-cast aluminum housing in black, it delivers bright white light. This light serves as daytime running lights, refit headlights, or auxiliary illumination for off-road trails and other on-vehicle tasks. Die-cast aluminum housing for durability 4-inch round compact design for versatile mounting Black finish that blends with most vehicles White light at 6000K delivering 1500 lumens DC 9–30V input compatible with most car and motorcycle electrical systems Long lifespan of about 50,000 hours Specifications: 15W, DC 9–30V, 6000K color temperature, 1500 lm, ~50,000 hours. Fit: Designed for 4-inch round mounting on bumpers, grilles, or roof racks with standard mounting kits.

Read more less

LED Flood Light for Vehicles and Boats is a rugged, waterproof lighting solution built to withstand outdoor use. It features a black extruded aluminum housing, a high-transmission PC lens, and tempered glass for durability. This light supports both focused and wide-area illumination, making it suitable for off-road driving, docking, or work-site tasks at night. 12 x 3W CREE LEDs for a total 36W output Adjustable angle with stainless steel side brackets and a full aluminum housing for heat dissipation Dual beam options: 10° spot for targeted lighting; 60° flood for broad coverage Durable construction with tempered glass lens and weather-resistant design Wide compatibility across off-road vehicles, ATVs/UTVs, golf carts, boats, and heavy equipment Specifications: Power 36W; LED type 12x3W CREE; beam angles 10° and 60°; housing color black; mounting hardware in stainless steel. Fit: Suitable for standard mounting brackets on most off-road vehicles and boats, enabling straightforward installation.

Read more less

This 2-pack LED car fog lights set is designed for practical, everyday driving. It delivers a clear, cool white output for improved visibility. Ideal for improving visibility in fog, rain, or low-light conditions. The compact design supports versatile installation on a range of vehicles. 2-pack LED bulbs for fog lights and common auxiliary roles. Cool White output for crisp, natural illumination. Slim housing with an adjustable bracket for broad vehicle compatibility. Low power consumption with a long service life. Easy installation; 100% brand new. Specifications: Cool White color; slim housing; adjustable bracket; easy installation. Please verify the bulb type and fit for your vehicle before purchasing. Fit: The adjustable bracket and slim design support mounting on many car models; confirm compatibility with your vehicle's bulb type.

Read more less

This headlight base adapter is a pair designed for easy, plug-and-play installation into your factory headlight assembly, with no modifications required. Ideal for upgrading to H7 LED headlights on BMW E39-2, 5 Series, and Z Series models. It keeps the original socket intact while providing a secure mount for the bulbs. H7 LED bulb compatibility with factory sockets Tool-free, plug-and-play installation into the original headlamp housing Pair included for both left and right headlights Compact footprint: 44 × 10 mm Lightweight design at 10 g per adapter Specifically designed for BMW E39-2, 5 Series and Z Series headlights Light specs: Size 44 × 10 mm; weight 10 g. Fit: Compatible with BMW E39-2, 5 Series and Z Series headlamps that use H7 bulbs.

Read more less

This H7 LED Headlight Base Retainer Adapter is a compact, easy-install component for BMW E39-1 and Benz SLK headlight assemblies. It enables secure seating of H7 LED bulbs in the factory housing without socket modification. Use this adapter when upgrading from stock halogen to H7 LED bulbs to preserve beam alignment and protect the original socket during retrofit. Plug-and-play with the factory headlight assembly; no wiring changes required. Preserves the original socket and avoids socket damage during LED upgrades. Secure retention back into the housing for stable beam alignment. Compact size and light weight: 44 x 24 mm, 18 g. Compatible with H7 LED bulbs on listed models (verify your vehicle year and connector). Specifically designed for BMW E39-1 and Benz SLK headlight systems. Specifications: Size 44 x 24 mm; Weight 18 g. Fit: Designed for H7 LED upgrades in BMW E39-1 and Benz SLK headlight assemblies; confirm compatibility with your vehicle’s headlight housing before purchase.

Read more less

This HID Xenon Ballast Extension Cable provides a 100 cm extension to place your ballast away from the headlamps for flexible routing. Ideal where headlight space is limited or heat exposure is a concern. It helps keep ballast wiring organized while enabling placement in cooler locations on motorcycles, boats, RVs, cars, SUVs, and trucks. Extension length: 100 cm for versatile routing High-capacity copper wire resists voltage and current draw Crimped and shrink-wrapped terminals with heatproof tubing Keeps ballast away from heat while extending ballast-to-bulb connection Supports standard HID ballast connections with organized wiring Suitable for a range of vehicles and recreational applications Specifications: length 100 cm; protective tubing is heatproof thermoplastic; compatible with common HID ballast wiring harnesses. Fitment: Suitable for motorcycles, boats, RVs, cars, SUVs, and trucks using HID ballast systems.

Read more less

Multi-Color LED Car Clearance Lights with Remote Control offer flexible lighting for vehicles. The LED module features RGB color options and a remote for easy adjustments, enabling onboard lighting that suits different situations. Use it to illuminate interiors or add auxiliary lighting around exterior areas. It supports 13 colors and multiple dynamic modes for signaling or ambiance while keeping power usage low. Light specifications: RGB LED, 13 color options, remote control. RGB LED with remote control: power on/off, brightness, and color/mode selection (flash, strobe, fade, smooth). Brightness adjustment with two controller buttons for quick level changes. Low power consumption and long lifespan for energy efficiency. Versatile installation: suitable for interior lights, dome lights, map lights, tail boxes, side markers, license plate lights, and more. Compact, low-profile design that fits tight spaces on most vehicles. Fit: Designed for common car lighting setups; provides flexible color and mode options without specialized tools.

Read more less

The H7 Headlight Socket Adapter is designed to adapt H7 bulbs for select Audi and Buick models. It uses a metal construction with high heat resistance to support LED headlight upgrades without altering the original socket. When upgrading to aftermarket LED headlights, this adapter helps you install without damaging the factory wiring, keeping your headlight system simple and reliable. Bulb compatibility: H7 bulbs Material and durability: metal construction with high heat resistance Installation: enables aftermarket LED headlight kits without modifying or destroying the original socket Vehicle compatibility: Audi A3, A4L, A6L; Buick Regal, Excelle, LaCrosse Fit and contact: maintains proper electrical contact and secure alignment Maintenance: straightforward replacement and repeatable performance Light specificationsMetal construction designed to withstand heat from LED headlights; no additional hardware required. FitFits H7 sockets for the listed Audi and Buick models. Confirm bulb type and available space in the headlight housing before installation.

Read more less

This 2-pack LED fog light kit delivers 6000K white illumination for improved visibility in fog and adverse weather. It operates at 12V and offers tool-free installation for many vehicles. Ideal for replacing aging fog lights or upgrading nighttime visibility on rural roads. The slim body and adjustable bracket support flexible mounting across many car models. 6000K white LED output for clear visibility in fog and poor weather 12V DC operation suitable for most vehicles 2-pack kit provides two lamps for dual fog-light setup Slim, adjustable bracket enables flexible mounting in many housings Low power consumption with long LED lifespan Versatile use for fog lights, with potential for other exterior lighting where compatible Specifications: Color temperature 6000K; Voltage 12V DC; Pack size 2; LED technology with extended lifespan and low current draw. Fit: Designed for 12V automotive systems and many fog-light housings. Verify compatibility with your vehicle’s make, model, and bulb type before purchase.

Read more less

The BA9S LED Car Clearance Light in white provides a straightforward, maintenance-friendly lighting option for vehicles. This LED module offers reliable visibility for exterior clearance lighting and basic vehicle lighting needs. Designed for exterior clearance lighting on cars, trucks, trailers, and other ground vehicles, this unit fits standard sockets that accept BA9S LEDs. Base type: BA9S socket, commonly used in automotive clearance lighting. Color: White light designed for clear daytime visibility. LED technology delivers long service life with minimal heat. Low power consumption helps reduce electrical load. Simple installation with plug-and-play wiring, no complex tools. Shock resistant construction remains functional in cold environments. Light specs: Color white; Base BA9S; LED design for durable operation in vehicle environments. Fit: Designed to fit BA9S sockets used in vehicle clearance lighting.

Read more less

The LED Spot Light 30 Degree Adjustable is a rugged lighting option for vehicles and boats. Its compact 18W Cree LED array focuses light with a narrow 30‑degree beam for precise illumination. Use it for off-road night driving, docking at a marina, or work-site tasks where targeted lighting improves safety. 6 x 3W Cree LEDs; 18W total 30° spot beam with adjustable angle for precise aim Black extruded aluminum housing with efficient heat dissipation High-transmission PC lens plus tempered glass cover for durability Versatile mounting for off-road, marine, ATV/UTV, golf carts, farming equipment Light specifications: 18W total, 30° adjustable beam, black extruded aluminum housing, high-transmission PC lens with tempered glass cover, suitable for versatile mounting on vehicles, boats, and equipment. Fit: Designed to fit standard mounting brackets on a range of vehicles and craft.

Read more less

This LED car warning light provides clear signaling for roadside emergencies. It features two flexible, waterproof lamp units with a total of 86 LEDs. Designed for emergency signaling on the road, it mounts to the vehicle sunshade for fast setup during breakdowns, accidents, or roadside assists. 86 LEDs total (43 per lamp) for bright, even signaling. 12 flash patterns, including left-right sequences and simultaneous flashes. Two flexible, durable lamp modules designed for vehicle use. Waterproof design suitable for rain and dust. Sunshade mounting for quick, unobtrusive installation. Specifications: 86 LEDs total (43 per lamp). Two lamp modules. Waterproof design. Designed for sunshade mounting. Fit: Intended for installation on a vehicle sunshade for warning signaling.

Read more less

This 60 cm Car LED Turn and Running Lights provides a practical lighting solution for ground vehicles. Its simple, low-profile design supports quick installation and predictable performance in varied climates. Ideal for daytime running and turn signaling, it improves visibility in varied driving conditions. The 60 cm length offers flexible mounting options on most bumper profiles for common setups. 60 cm LED light bar for versatile mounting on bumpers and grilles Simple design and easy installation Low power consumption for energy efficiency Bright light output for clear signaling Shock resistant construction for rough road conditions Low operating temperature for stable performance Specifications: Length 60 cm; LED light; designed for ground vehicles. Fit: Designed to be installed on ground vehicles; verify mounting points and electrical compatibility with your setup.

Read more less

This 1 Pair Bulb Holder Base With Wire is designed for T25/3157 bulb installations in cars. It provides a simple, pre-wired solution to support LED or halogen replacements while keeping bulbs aligned. When upgrading to LEDs or swapping OEM bulbs, this adapter helps secure the bulb and reduce movement in the housing, providing a steadier install. Compatible with T25 and 3157 bulb bases. Pre-wired base for straightforward installation. Includes two holders (1 pair) with wiring. Helps maintain proper alignment inside standard automotive housings. Suitable for interior and exterior lighting applications in many vehicles. Package includes 1 pair; no additional components are required for basic use. Fit: Works with vehicles that use T25/3157 bases; please verify your bulb model before purchasing to ensure compatibility.

Read more less

The T25/3156 Bulb Holder Base Socket with Wire provides a secure base for automotive bulb replacements. It is designed for T25 and 3156 bulb types and includes a wire lead for straightforward installation. Use this adapter when upgrading to LED bulbs or when bulbs sit loosely in the original socket. It helps maintain alignment and stability in tight lamp assemblies. Compatibility: Fits T25 and 3156 bulb bases; verify your vehicle’s bulb model before purchase. Integrated wiring: Includes a ready-to-connect lead for direct wiring into the existing harness. Bulb stability: Helps prevent movement or misalignment after installation. Versatile applications: Suitable for various automotive lighting locations that use T25/3156 bases. Compact design: Slim profile fits narrow sockets without interfering with surrounding components. Fit: Suitable for vehicles that accept T25/3156 base sockets; confirm bulb type and socket compatibility before installing.

Read more less

This T20 7443 Bulb Holder Base Socket With Wire replaces the original socket when upgrading car lights. It supports T20/7443 bases and provides a stable anchor for LED or standard bulbs. It is designed to be straightforward to install, without specialized tools. Use it when upgrading exterior lights like tail lights or turn signals to LEDs, helping bulbs stay aligned and connected inside the housing, even in cramped spaces. Compatible with T20/7443 bulb bases Inline wiring for direct harness connection Stabilizes LED or standard bulbs in housing Works with LED or halogen bulbs Plug-and-play installation with basic tools Maintains bulb alignment and reduces wobble Compact form for tight spaces Optional specs: Cable length and connector details are not listed. Fit: Suitable for T20/7443 sockets on compatible cars. Please check your bulb model before purchasing.

Read more less

Car Bulb Holder Base Socket With Wire is designed to simplify T10/W5W (194) bulb replacements by providing a secure, wired socket that anchors the new bulb in place. Use this adapter when upgrading to LED bulbs to maintain proper alignment and stable seating in interior, license plate, or marker lights. Please check the bulbs model of your car before purchasing to ensure compatibility. Compatible with T10, W5W, and 194 bulb types Includes a base socket with integrated wire for straightforward installation Helps LED replacements stay steady, reducing movement and misalignment Promotes reliable electrical contact and minimizes flicker risks Plug-and-play fit with standard vehicle sockets, no extra hardware required Specifications: Socket type — base with integrated wire; Bulb compatibility — T10/W5W/194. Fit: Designed for vehicles that use T10/W5W/194 bulbs; verify your bulb model before replacing.

Read more less

This H13 bulb holder base socket with wire provides a reliable connection for H13 headlights. Check your vehicle’s bulb model before purchasing to ensure compatibility. Designed to address instability when upgrading to LED or other aftermarket bulbs, it helps secure the bulb in the housing and reduces movement during driving. H13 compatibility: specifically designed for H13 headlight bulbs to ensure proper seating in compatible assemblies. Integrated wiring: includes a wire lead for direct connection to the vehicle harness. Secure mounting: base socket supports steady seating, reducing vibration-related loosening. Electrical reliability: maintains stable contact across typical automotive temperature changes. Easy replacement: installs into standard H13 sockets with minimal tools. Light specifications: suitable for use with standard H13 bulbs; verify fit with your headlight housing and polarity. Fit: H13 bulb holder base socket with wire for car headlights.

Read more less

The H8 H11 Bulb Holder Base With Wire provides a straightforward, pre-wired connector for H8 and H11 bulb replacements. Designed to help secure LED bulbs that may not stay fixed in the original socket, it offers a stable mounting option without wiring modification. Compatibility: H8 and H11 bulb sockets used in many car models Pre-wired base enables quick, tool-free installation without rewiring Helps hold LED bulbs securely in the housing to reduce movement Standard automotive connectors ensure reliable electrical contact Provides a stable mount compatible with common LED replacement kits Before purchase, verify your car’s bulb model and housing fit Light specifications: Pre-wired base with standard automotive connectors to support common LED bulbs. Fit: Designed for H8 and H11 sockets; please confirm compatibility with your vehicle’s lamp assembly.

Read more less