Auto

HID Xenon Ballast Extension Cable, 50 cm, lets you position HID ballasts away from the headlamps for flexible wiring. This extension uses high-capacity copper conductors and a heatproof thermoplastic sleeve to support durable, organized installations. Use it when ballast placement is limited by space, heat, or routing in cars, motorcycles, boats, RVs, trucks, or other vehicles. Length: 50 cm extension cable for HID ballast-to-bulb connections Construction: high-capacity wire with crimped terminals and shrink-wrapped heatproof tubing Heat management: relocates ballast away from heat sources to protect wiring and components Routing flexibility: enables organized, clean wiring in tight or awkward spaces Compatibility: suitable with standard HID ballast connections across a range of vehicles Installation notes: ensure power is off during installation and verify connector compatibility Light specifications: 50 cm extension; robust insulation and protective sleeve support a durable, long-life installation. Fit: Compatible with common HID ballast connectors and provides extra reach for varied vehicle layouts, helping you adapt ballast placement to your wiring plan.

Read more less

Universal Headlight Soft Rubber Dust Cover helps seal headlight openings and protect lamps from water, dust, and moisture. Designed to replace the original headlight seal cap and support aftermarket bulbs such as Xenon or Bi-Xenon without modifying the housing. Material: soft rubber for a flexible, snug seal. Size and compatibility: inner diameter 50-70 cm; fits a range of headlight housings. Easy installation: allows installing aftermarket bulbs without disassembly or modifying the housing. Hole adjustment: if the bulb is slightly larger than the dust-cover opening, widen the hole with a knife. Protection: blocks water, dust, and moisture from entering the headlight or fog light. Specifications: Material: soft rubber; Color: varies by stock; Inner diameter range: 50-70 cm. Fit: designed for headlight assemblies with a 50-70 cm inner diameter; measure your opening to confirm compatibility.

Read more less

Universal Car Chassis Atmosphere Lights add subtle interior illumination for any vehicle. The set uses 9 LEDs and runs on DC 12V, drawing 9W with a luminous flux of 800 LM. Weighing about 0.2 kg per pair, they are designed for a long service life up to 50,000 hours. Ideal for night driving, under-dash accents, or footwell glow, these lights provide a discreet ambience without glare. The plug-and-play design and two-wire wiring (black = negative, red = positive) simplify installation in most cabins. 9 LEDs, 12V DC, 9W, 800 LM Plug-and-play with two-wire connection (black negative, red positive) Universal fit for most car models Lifespan up to 50,000 hours; weight 0.2 kg per pair Compact, discreet form for dash, footwell, or trunk lighting Easy installation, minimal tools required Specifications: LEDs: 9; Voltage: DC 12V; Power: 9W; Luminous flux: 800 LM; Lifespan: 50,000 hours; Weight: 0.2 kg per pair. Fit: Universal compatibility with a wide range of vehicle makes and models; suitable for dash, doors, or footwell lighting.

Read more less

This car round dome reading light provides focused interior illumination for nighttime reading in your vehicle. It features a simple design and easy installation, with a compact size that fits standard dome light spaces. The unit is designed to minimize heat output and supports energy-efficient use. Designed for drivers and passengers who need a reliable reading light without distracting glare. It offers steady brightness while keeping heat low, supporting longer use during road trips or parked moments. Simple design and easy installation Reduces heat generation for longer life Low power consumption for energy efficiency Shock resistant with stable brightness Compact size: 100 x 100 x 20 mm Fit: designed for round dome light fixtures in car interiors; fits most standard dome light housings in cars.

Read more less

The HID Xenon Headlight Controller Relay Harness provides a practical solution for HID conversions while preserving your vehicle’s existing light switch. Designed for H11 bulb assemblies, it offers two-channel control with a weather‑resistant install suitable for 12V automotive systems. Two-channel design lets you control two headlights from one harness. Water-resistant switch with self-locking terminals reduces risk of shorts. Direct integration with the original car switch ensures lamp control remains familiar. Red positive/fuse lead connects to the battery; black relay lead also to the battery. Relay bar lights cable uses red/black to match the light circuits. Switch power lead (black) taps into the vehicle power source to feed the switch. Do not connect the lamp directly to the harness, as high startup current can overload wiring. Specifications: 12V DC operation; compatible with H11 HID kits; includes fuse, water-resistant switch, and color-coded wiring for straightforward routing. Fit: H11 headlight housings and other 12V automotive systems with standard wiring.

Read more less

Two-pack T10 clearance bulbs designed for vehicle marker lights. They deliver a blue-tinted glow suitable for exterior lighting. The bulbs are compact and drop-in compatible with standard T10 sockets. Ideal for upgrading exterior lighting on cars, trucks, or trailers where a distinct blue glow improves visibility in daytime and night driving. The two-pack provides matched color and brightness. Base: T10 wedge, fits standard vehicle sockets Power: 2W per bulb Light output: ~180 lumens per bulb Color: 5500K with light blue tint Pack: 2 bulbs included Applications: Exterior marker lights on cars, trucks, trailers; blue tint aids visibility Light specs: 2W per bulb, ~180 lumens, 5500K, light blue color. Fit: Works with standard T10 clearance/marker light fixtures on cars, trucks, and trailers.

Read more less

This 3m Flexible LED Strip Light is designed for car interior decoration, offering a customizable ambient glow. It uses energy-saving LEDs to provide bright, even light without draining the vehicle's power. It bends along curves and corners, and can be cut to the exact length you need, making it easy to tailor for dashboards, door panels, or trunk accents. 3 m length; flexible strip that bends around contours Cuttable to your chosen length with clean ends Waterproof design suitable for variable conditions Energy-efficient LEDs with long lifespan 12 V DC power supply for automotive use Thin, tube-like profile for discreet installation Specifications: Length 3 m; Power 12 V; Waterproof construction. Fit: Compatible with most 12V vehicle electrical systems and standard interior mounting options.

Read more less

H7 LED Headlight Retainer Adapter secures aftermarket H7 LED bulbs in the stock headlamp housing, eliminating movement and vibration. When upgrading from halogen to LED, this adapter keeps the new bulb firmly seated without modifying the socket or housing. Compatible with H7 LED upgrades for Volkswagen Touareg and select models including SAAB, Mercedes‑Benz B‑Class, and M‑Class (ML). Keeps aftermarket LED bulbs held securely in the original headlamp housing. Simple, tool-free installation that avoids altering the stock socket. Pack includes 2 LED headlight retainers (bulbs not included). Low-profile design minimizes obstruction and aligns with factory fit. Light specifications: Package includes 2 retainers; designed for standard H7 LED bulbs. Fit: Designed for H7 LED bulbs in the stock headlamp housing of the listed vehicles. Before purchase, compare with the stock socket under the hood to confirm compatibility.

Read more less

The Honda H1 Headlight Base Adapter enables a straightforward LED headlight upgrade without modifying the original socket, helping preserve factory wiring integrity. Designed for owners who want to upgrade headlights without cutting or rewiring, it maintains correct bulb seating and reliable electrical contact while offering mounting compatibility with aftermarket LED headlight kits. It fits Honda Odyssey, Accord, Civic, and CR-V. Compatible with H1 bulbs Material: plastic High heat resistance for headlight housing temperatures Enables installation of aftermarket LED headlight kits without destroying the original socket Fits Honda Odyssey, Accord, Civic, and CR-V Compact base design for easy alignment in tight spaces Specifications: Bulb compatibility: H1; Material: Plastic. Fit: Honda Odyssey, Accord, Civic, CR-V.

Read more less

HID Headlight Bulbs 5500K for cars offer daylight-like illumination with a 5500K color temperature and a 55W power rating. These bulbs are designed to replace standard automotive bulbs with HID xenon technology. They’re suitable for driver visibility in night driving, fog conditions, and as DRL enhancements, helping you clearly see road edges and signs without excessive glare. 55W power output provides strong, consistent illumination across low and high beam patterns. 5500K color temperature delivers bright white light with good separation on dark roads. HID xenon technology improves visibility compared with traditional halogens. Up to 3x brighter than halogen bulbs, helping you spot hazards sooner. Designed for automotive lighting applications including headlights, fog lights, and DRLs. Light specs: 5500K color temperature; 55W power; HID xenon technology. Fit: Verify compatibility with your vehicle’s year, make, model, and socket type before purchase.

Read more less

The Flexible LED Strip Light for Car Decoration offers adaptable lighting for vehicles and other spaces. Measuring 4 meters, it can be shaped to follow a car’s curves, around dashboards, door panels, or trunk linings, and trimmed to fit tight spots. Use it to add subdued interior accents or exterior outlines without heavy installation. Its waterproof design supports indoor and sheltered outdoor use. Flexible and bendable to follow curves and contours Cut-to-length capability for precise installation Energy-efficient LEDs with long service life Waterproof construction suitable for indoor and outdoor use 4 m length covers extended sections and multiple areas Light specifications: Length: 4 meters. LED strip format. Waterproof for indoor and outdoor use. Fit: Suitable for car interior decoration and other DIY lighting projects that require a long, flexible LED strip.

Read more less

Two-pack bulb socket holders designed for BA9S small-base bulbs. The housings use a durable plastic body with metal contacts to ensure a reliable connection in tight fixtures. Use these sockets in dashboard indicators, display lighting, model projects, and other compact lighting setups where BA9S bulbs are used. They provide a straightforward replacement option for upgrades or repairs. Light and construction: Plastic housing with metal contacts supports BA9S small-base bulbs. The design suits LED or incandescent BA9S replacements and prioritizes stable electrical contact and modest heat tolerance in compact fixtures. Includes 2 sockets ready for BA9S bulbs Materials: plastic housing with metal contact pins Easy installation in compatible fixtures Heat-dissipation design with high-temperature resistance Compact form factor suited for tight spaces Fit: Works with BA9S small-base bulbs in fixtures that support bayonet-style 9 mm bases.

Read more less

The H7 Xenon HID Headlight Base Retainer Adapter provides a practical mounting solution for upgrading your headlight with an aftermarket HID kit. Made from heat-resistant plastic, it supports H7 bulbs and keeps the original socket intact, significantly reducing the risk of socket damage during installation. Ideal for Kia Sorento and similar models seeking a clean HID retrofit without socket modification or extra wiring. Compatibility: H7 bulbs; designed for Kia Sorento and similar models. Material: heat-resistant plastic for durable headlight housing. Easy installation: Preserves the original socket and aligns with factory mounting points. Heat tolerance: Handles ballast heat during HID operation. Fit: Matches factory points for secure mounting. Fit: H7 Xenon HID base retainer compatible with Kia Sorento and similar models.

Read more less

This H7 Headlight Retainer Adapter for BMW provides a secure base for installing H7 LED bulbs in stock headlight assemblies. Made from high-heat resistant plastic, it supports direct plug-and-play installation in compatible BMW models. Ideal when upgrading from traditional halogen HID to LED, ensuring the H7 bulbs lock firmly into the existing housing without modification. Compatibility: Works with H7 LED bulbs and BMW models E46, 318i, E65, E90. Material: High-heat resistant plastic designed for headlight temperatures. Installation: Direct plug-and-play with no wiring changes required. Secure fit: Adapters lock the LED bulbs into the stock headlamp housing for stable alignment. Package includes: 2 LED headlight retainers (bulbs not included). Specifications (optional): Material: plastic; Color: not specified; Heat resistance: high; Includes: 2 retainers. Fit: BMW E46/318i/E65/E90 with H7 halogen HID-to-LED conversions.

Read more less

This license plate light is designed for cars and motorcycles. It features a compact aluminum housing and a 27 cm cable for flexible installation. Use it to replace aging license plate lights or upgrade lighting for improved visibility when parked at night. Plug-and-play installation for quick and tool-free setup DC12V operation with a 0.4W power draw 27 cm cable length allows flexible routing under panels 18 x 12 mm aluminum alloy housing for durability Bright, pure-color illumination with consistent brightness Shock resistant with low-temperature operation and long life Specifications: Voltage DC 12V; Power 0.4W; Size 18x12 mm; Weight 20 g; Material aluminum alloy; Cable length 27 cm. Fit: Fits most cars and motorcycles with standard license plate lighting assemblies.

Read more less

Wedge Instrument Panel LED Light for Dashboard Gauge Cluster is a compact, plug-and-play bulb designed to illuminate dashboard gauges clearly. It provides improved visibility in instrument panels where the speedometer, gauge cluster lighting, and indicator lamps dim, making it suitable for a wide range of vehicles that use wedge LED replacements. High luminous efficiency with low power consumption Long service life and stable performance Energy-saving and environmentally friendly design Easy plug-and-play installation; no wiring or modifications required Designed for instrument panels, including speedometer, gauge cluster lights, and indicator lamps Compact wedge form factor that fits typical dashboard lighting sockets Light specifications vary by model; verify color and brightness in the product listing for the exact SKU. Fit: Designed to fit standard wedge-style instrument panel sockets used for speedometer and indicator lamp lighting.

Read more less

A practical 7-inch square headlight work light built for cars and trucks. It provides focused, efficient illumination with a compact footprint and simple installation. Ideal for off-road night runs, construction sites, or work on a driveway. The light remains effective in dusty or foggy conditions thanks to its protective design. 7-inch square LED work light with a low-profile housing Dust-proof and anti-fog design for harsh environments Bright, concentrated light with energy-saving LED modules Detachable mounting position for flexible installation Efficient heat dissipation with soft, non-dazzling beam Durable construction designed for long life and reliable use Specifications Size: 7 inches; Light source: LED modules; Beam: concentrated; Mounting: detachable position; Environment: dust-proof and anti-fog. Fit: Fits standard 7-inch square headlight housings on most cars, trucks, and SUVs.

Read more less

Car Interior RGB LED Light with Wireless Remote Control delivers customizable interior lighting for cars. The RGB LEDs offer modes such as Flash, Strobe, Fade, and Smooth, adjustable via a wireless remote. Ideal for accenting the dash, footwells, or door panels. Plug-and-play setup powers from a cigarette lighter and uses double-sided adhesive tape for easy mounting, without wiring changes. The lights help improve visibility and set a personal mood while driving. RGB LED with modes including Flash, Strobe, Fade, and Smooth, adjustable via wireless remote. Wireless remote lets you change color and brightness from the driver seat. Easy installation with double-sided adhesive backing and plug into 12V cigarette lighter; no wiring changes. Flexible placement for dash, footwell, or door panel accents in any car interior. Cable lengths available: 157 cm or 110 cm to fit varied cabin layouts. Powered by a standard 12V vehicle system for reliable, cord-free operation. Fit: Works with standard 12V cigarette lighter sockets commonly found in cars.

Read more less

These H4 Car HID Xenon Headlight Cables with a ceramic socket provide a reliable, plug-and-play connection for HID installations. Use this cable to connect an HID ballast to the headlight housing without modifying the stock wiring, supporting simple upgrades or replacements. Ceramic socket for heat resistance and long-term durability High-purity copper wiring for efficient current transfer Pre-wired for plug-and-play installation; no stock wiring modification required Male-to-Female connector compatible with H4 HID Xenon headlight systems Low power consumption with stable performance under typical vehicle electrical load Specifications: Ceramic socket; copper conductors; male-to-female connection; suitable for H4 HID Xenon headlight systems. Fit: Works with standard H4 HID Xenon headlight harnesses in most vehicles.

Read more less

White LED Vanity Mirror Lights for BMW offer a straightforward interior lighting upgrade with a plug-and-play design. Designed for models F10, F11, F07, F01, F02, F03, and F04, these lights install without wiring or modification. Use them to illuminate the vanity mirror when applying makeup, locating items in the cabin at night, or adding subtle illumination during daytime. 18 SMD-3528 LEDs deliver even, bright white light. Low power consumption with high efficiency. Direct plug-and-play installation, no wiring needed. No modification or damage to the original housing. White light color matches BMW interior lighting. Specifically compatible with BMW F10, F11, F07, F01, F02, F03, F04. Specifications: 18 LEDs (SMD-3528), white light, plug-and-play, compatible with listed BMW models. Fit: BMW F10, F11, F07, F01, F02, F03, F04.

Read more less

Designed for 9005 HID Xenon headlight systems, this cable uses a ceramic adapter socket for robust, heat-resistant connections. It pre-wires for plug-and-play installation, so you don’t need to modify stock wires. Ideal for retrofit projects, repairs, or replacements in vehicles using 9005 bulbs. It provides a straightforward path from the vehicle harness to the HID ballast, reducing wiring clutter in tight engine bays. Ceramic adapter socket for heat resistance Pre-wired for plug-and-play installation Copper wiring delivers reliable conductivity Low power draw and energy-efficient operation No modification to stock wiring required Compatible with 9005/HB3 headlight systems Light specs: Ceramic adapter socket, copper wiring, designed for 12V automotive electrical systems. Fit: Designed to fit 9005 headlight assemblies with standard stock wiring harness in a wide range of vehicles.

Read more less

This two-pack white license plate light offers a straightforward upgrade for vehicles. Each light uses 18 SMD-3528 LEDs to produce bright, white illumination with low power consumption. Plug-and-play and CAN bus compatible, it avoids dashboard interference. Ideal for refreshing dim license plate lighting. No wiring or modification required—simply replace the old lamps, snap in place, and you’re done. The compact design fits standard housings without altering the original fit. 2-pack license plate lights 18 SMD-3528 LEDs per unit for bright white light Plug-and-play installation; no wiring CAN bus compatible; reduces risk of dashboard errors No filament structure; resistant to oxidation and vibration Low power draw for energy efficiency Lightweight, compact design fits common license plate housings Specifications: Color: White; LED type: SMD-3528; LEDs per unit: 18. Fit: Mercedes-Benz W220 1999–2005 (S‑Class).

Read more less

This 2-pack Car Dome Reading Light offers compact, reliable interior illumination for vehicles. Designed for 36mm dome light assemblies, these lamps are ready for simple replacement in many cars. Ideal for reading in front or rear seats, or lighting the doorway when parked. The high-brightness LED provides clear illumination without glare, helping you find items or read maps after dark. 36mm diameter interior lamp compatible with standard car dome light housings High-brightness LED with low power consumption Aluminum alloy shell with high-temperature resistance for durability Durable, non-fading beams with consistent brightness over time Easy installation with a plug-and-play design Compatible as interior car light, dome light, door light, and reading light Specifications (optional): 2-pack; 36 mm diameter; LED-based lighting; designed for vehicle interior use. Fit: Designed for 36mm interior lamp sockets in many vehicle dome light fixtures.

Read more less

2-Pack T10 W5W LED Car Interior Reading Lamp 6000K provides compact, practical lighting for vehicle interiors. These LEDs are designed for simple swap-in installation in most interior lamp housings that accept T10 or W5W style bulbs. They deliver a cool white light that improves visibility for map reading and cabin tasks. Includes 2 lamps for interior lighting. Fits T10/W5W sockets commonly used in cars. Color temperature 6000K delivers neutral cool white illumination. No tools required; plug-and-play installation. Low heat generation reduces surface warmth and extends life. Low current draw supports energy efficiency and battery life. Size: 23 x 9 x 4 mm. Fit: works in many vehicle interior fixtures designed for T10/W5W bulbs.

Read more less