Auto

This 12 mm car spring clip set provides a practical, space-saving way to secure hoses and pipes in vehicles. Made from spring steel 65MN, it maintains a firm grip in tight under-hood spaces. Use these clips to fasten air hoses, water lines, fuel lines, or silicone hoses in engine bays, cooling circuits, and other automotive fittings. Inner diameter 12 mm; outer diameter 14 mm; thickness 1 mm; width 8 mm Material: spring steel 65MN for strength and corrosion resistance Includes 10 clips per pack Easy to install with a simple snap-in action; no tools required Suitable for air hoses, water pipes, fuel lines, and silicone hoses Designed for 12 mm hose and pipe applications in passenger cars and light trucks Fit: Designed for hoses and pipes with about a 12 mm inner diameter; verify actual hose size before installation.

Read more less

A practical fastener for hoses and tubes, the 10mm Spring Clip Set includes 10 clips for everyday tasks. Ideal for securing air hoses, water lines, fuel lines, and silicone hoses in automotive, workshop, and home projects. Durable spring steel 65MN for long-lasting use Inner diameter 10 mm; outer diameter 11 mm; thickness 0.5 mm; width 8 mm Suitable for air hoses, water pipes, fuel lines, silicone hoses Pack of 10 clips included Easy to operate and carry for on-the-go tasks Compact design minimizes bulk in tight spaces Specifications: Material: spring steel 65MN. Size details above. Pack: 10 pieces. Fit: Designed for hoses and tubes with a 10 mm inner diameter.

Read more less

Secure hoses and lines in automotive assemblies with this 9mm Car Spring Clip set. Designed for simple installation in tight spaces, it stays in place under typical vibration. Each clip is made from spring steel 65MN and sized for 9mm ID hoses, such as fuel lines, air hoses, water pipes, and silicone hoses. Inner diameter 9 mm; outer diameter 10 mm; thickness 0.5 mm; width 8 mm Material: spring steel 65MN Pack includes 10 clips Quick snap-on design for secure holds Compatible with 9 mm ID hoses across automotive and workshop uses Light specifications: Inner diameter 9 mm; Outer diameter 10 mm; Thickness 0.5 mm; Width 8 mm; Material: spring steel 65MN. Fit: Designed for hoses with 9 mm inner diameter. Verify hose ID before installation.

Read more less

The Car Hose Spring Clip provides a practical, reusable solution for securing small-diameter hoses in automotive and workshop settings. Use these clips to route and stabilize air hoses, water lines, fuel lines, and silicone hoses, helping prevent movement and abrasion in tight spaces. Inner diameter: 6 mm; outer diameter: 7 mm; thickness: 0.5 mm; width: 6 mm. Material: spring steel 65Mn for consistent clamping force and durability. Compatibility: suitable for air hoses, water pipes, fuel lines, silicone hoses, and similar flexible tubing. Easy to install and remove with a straightforward clip-on design. Pack includes 10 pieces, offering multiple clips for different connections. Reusability: can be reused across projects without significant loss of grip. Specifications: 6 mm ID, 7 mm OD, 0.5 mm thickness, 6 mm width. Material: spring steel 65Mn. Pack: 10 pieces. Fit: Designed for hoses with a 6 mm inner diameter.

Read more less

The Ford Tailgate Lock Actuator is a replacement part designed for Ford Fusion and Fiesta models. Use this actuator to restore reliable tailgate locking when the original unit fails, sticks, or is noisy. Made from durable plastic and metal for light weight and enduring use OE-style design follows original specifications for compatibility Fits Ford Fusion (2002–2012) and Ford Fiesta Mk5/MK6 (2002–2008) Easy to install with standard mounting points and connectors Reference OE numbers: 2S6T432A98AF and 1481081 (verify against your vehicle) Stable operation and reliable engagement for daily use Specifications: Material blends plastic and metal for balanced durability and light weight; OE references 2S6T432A98AF and 1481081. Fit: Ford Fusion 2002–2012; Ford Fiesta Mk5/MK6 2002–2008. It is suitable for DIY replacement or professional service, helping restore trunk closure reliability.

Read more less

Secure the Jeep Wrangler hood with this red locking latch catch. Crafted from metal for durability, it is built to withstand off-road use and daily driving without sacrifice. This latch is ideal when replacing a worn or missing hood latch, or upgrading to a more reliable securing solution for rugged trails and frequent hood openings. Material: Metal construction for strength and longevity Color: Red finish for easy visibility Compatibility: Fits Jeep Wrangler JK 2007–2017 Installation: Simple mounting with common hardware Locking mechanism: Provides a secure catch to reduce hood movement on rough terrain Durability: Designed for repeated engagement and disengagement Light specifications: Color red; Material: metal. Verify mounting points and year compatibility before purchase to ensure proper fit. Fit: Confirm compatibility with Jeep Wrangler JK 2007–2017 prior to buying.

Read more less

The 1 m Waterproof USB Dashboard Extension Cable extends USB connectivity to car and motorcycle dashboards with a dual-port USB 3.0 interface. It is designed for automotive environments requiring a protected data link. Use cases include embedding a USB input to a panel or console, allowing external car audio devices or USB accessories to connect without loose cabling along the dash. Dual-port USB 3.0 extension for dash panels Backward compatible with USB 2.0 and USB 1.1 devices Waterproof design suitable for exposed dash areas 1.0 meter cable length for flexible routing Embedded mounting hole size 25 mm for panel installation Works with external car audio equipment USB inputs Specifications: Cable length 1.0 m; mounting hole diameter 25 mm; USB 3.0 interface (backward compatible with USB 2.0/1.1). Fit: Designed for dashboards and panels that accommodate a 25 mm mounting hole, suitable for cars and motorcycles.

Read more less

DEF Aluminum Oil Cap Engine Tank Cover for Dodge Ram Pickup replaces the stock cap with a durable aluminum unit. Designed for 2013–2017 Dodge Ram models, this cap installs in minutes and maintains a secure seal during routine maintenance. Material: aluminum alloy with plating for corrosion resistance and easy surface finishing. Toughness and finish: dense, defect-free material that polishes cleanly and resists wear. Design: distinctive shape that aligns with factory styling and allows straightforward installation. Threading: precise, fine threads for a secure seal with the oil tank. Replacement: direct replacement for the stock gas cap, with no alterations. Compatibility: fits 2013–2017 Dodge Ram models, matching OEM thread standards. Finish: natural aluminum with plating; color matches the OEM look. Fit: direct replacement with standard OEM threading for Dodge Ram 2013–2017.

Read more less

This Car Door Lock Buckle Guard Protection Cover provides a practical shield for the door latch area on select Nissan and Venucia vehicles. Made from Grade-A ABS plastic, it offers a lightweight, durable guard that helps protect against scuffs during daily use. Use it when loading passengers or cargo in tight spaces, or parking near walls and curbs, to reduce paint chips and marks around the door lock buckle. Material: Grade-A ABS plastic Includes: 4 pieces for all four doors Installation: Quick, tool-free installation and removal Compatibility: Nissan Versa, Sylphy, X-Trail, Livina, Qashqai, Teana, March, Morano, NV200, Succe, Venucia D50, R50, R30, R50X, T70 Protection: Guards the door buckle recess from scuffs and dirt Maintenance: Easy to clean with mild soap and water Fit: 4-piece set designed for the listed Nissan and Venucia models; verify the guard matches your door buckle recess before installation.

Read more less

Nylon Cable Ties 5mm x 300mm, Black, 250-pack, General Use are designed for reliable indoor cable management. These ties are easy to handle with rounded edges to prevent snagging. Use them to group and secure cables, power strips, or hoses in home offices, garages, workshops, and electronics projects. 5 mm width, 300 mm length 48 lb tensile strength Rounded edges for easy handling and snag prevention Nylon construction for indoor use with fire-resistant properties per Chinese standard Black color blends with most setups Pack of 250; compatible with a wide range of cables and cords Specifications: Width 5 mm; Length 300 mm; Tensile strength 48 lb; Color: Black; Material: Nylon; Pack size: 250; Application: Indoor use. Fit for home, office, garage, and workshop cable management in tight spaces behind desks or inside equipment cabinets.

Read more less

Universal Aluminium Wheel Disc Brake Cover decorative adds a subtle, race-inspired look while helping manage brake dust on wheels. Made from aluminium, it resists corrosion and replicates the cross-drilled rotor silhouette seen on racing vehicles. Designed for passenger cars with drum brake systems. Not recommended for trucks or sport utility vehicles. This universal accessory is intended for drum brake applications; confirm compatibility with your vehicle before installation. Material: aluminium construction for corrosion resistance Appearance: cross-drilled rotor look to mimic racing brakes Compatibility: universal fit for many car types; drum brake applications only; not for trucks/SUV Installation: attaches with double-sided adhesive tape; includes hole alignment guidance Dust reduction: helps reduce brake dust buildup on wheels Preparation: clean hub surface with brake cleaner and test fit before final mounting Specifications (optional): Material: aluminium; Finish: natural metallic; Fit: universal for most passenger cars with drum brakes; Installation: double-sided adhesive tape. Fit: Universal design for many cars; to ensure proper fit, test align with wheel bolts, clean the disc surface and hub, apply tape with holes aligned, re-install wheel, and spin to check clearance.

Read more less

The Car Shock Absorber Spring Buffer is a practical component designed for the bumper-to-frame area of a car. It helps dampen minor impacts and reduces direct vibration transfer to the frame. Use this buffer during routine driving to minimize rattles on rough roads and after minor bumper contact. It provides a simple, replaceable solution that doesn’t require major modifications. Absorbs minor bumps between bumper and frame to reduce vibration. Compact, low-profile design fits in the bumper-frame space. Simple installation between bumper and frame with standard mounting points. Durable construction designed for regular road conditions. Easy to inspect and replace as part of maintenance. Note: This buffer is a non-structural accessory intended to reduce vibration in the bumper-to-frame area and should be used as part of standard maintenance checks. Fit: Verify your vehicle’s bumper-frame dimensions and mounting points to ensure a proper seating before installation.

Read more less

This Car Audio Power Noise Filter reduces electrical noise in automotive systems to help improve radio clarity while avoiding changes to normal audio signals. Use it where engine or power-supply noise degrades FM/AM reception or playback on CD, DVD, or VCD players, and where display screens are affected by electrical interference. Filters power-supply noise and pulse interference with an inductive circuit. Reduces motor resonance and timing glitches caused by current fluctuations. Minimizes hiss and interference in car radios and multimedia players (CD/DVD/VCD). Compact inline module designed for easy installation in dash, fuse box, or under-seat areas. Compatible with onboard computer systems and other automotive AV components. Compact inline module suitable for standard 12V automotive electrical systems. Designed to fit common car audio and multimedia setups.

Read more less

The Car 3-Pin Round Push Button Switch OFF-ON provides a straightforward control for add-on car electronics. Use it to switch interior lighting, dash cameras, auxiliary power ports, or exterior accessories. 3-pin round push button with OFF-ON operation for reliable control of auxiliary circuits. Designed for automotive use to switch additional equipment such as interior lighting, cameras, or exterior accessories. Compact round form factor fits dashboards, consoles, glove boxes, or custom panels. Compatible with standard 3-pin wiring harnesses for simple, wire-in installation. Suitable for interior and exterior vehicle installations, designed to withstand typical cabin and outdoors conditions. Durable construction suited for routine in-vehicle use and handling in busy environments. Optional light specifications: Some variants include illumination to show when the circuit is ON. If you need this, check the product option and voltage requirements. Fit: Works with most vehicles that use 3-pin round switches and common wiring harnesses.

Read more less

This Car Push Button Switch provides a simple control point for adding optional electrical accessories to your vehicle. It supports interior and exterior installations with straightforward wiring for practical customization. Use cases include powering auxiliary lighting, fans, portable outlets, or other aftermarket devices. It offers a direct on/off control that fits into standard automotive switches and panels. Push-button operation with clear tactile feedback for reliable control. Durable switch body suitable for interior and exterior mounting. Compatible with a range of aftermarket accessories and devices. Easy wiring with standard automotive connectors and common harnesses. Compact form factor that fits in many dash or panel spaces. Low-profile design that blends with most interiors. Fit: Works with aftermarket accessories and standard wiring setups, suitable for various dash or panel installations.

Read more less

This 2-pack features spider-shaped tire valve caps to replace missing caps and add a subtle decorative touch to your wheels. Designed for cars, motorcycles, and bicycles, these caps fit standard valve stems and help seal against dust and moisture. Spider-shaped design adds a distinctive, playful look to wheels 2-pack set lets you outfit multiple vehicles or replace pairs Universal fit for standard valve stems on cars, motorcycles, and bikes Durable construction withstands regular road use Low-profile, unobtrusive appearance with simple screw-on installation Finish designed to resist wear from typical road use Light specifications: Includes two caps; material and color details are not provided. Fit: Designed for standard Schrader valve stems used on most cars, motorcycles, and bicycles; not compatible with Presta valves.

Read more less

This heavy-duty 5-wire car door lock actuator adds powered central locking to most vehicles, enabling reliable lock/unlock control and easy integration with existing security systems. Use it to replace a failing actuator, retrofit older cars, or add central locking to a vehicle with an aftermarket alarm. 5-wire design provides robust power and signal paths for consistent operation. Ultrasonic welded housing delivers water resistance and lasting durability. 360-degree rotation supports flexible mounting in varied door layouts. Installation hardware is included for a straightforward, tool-friendly setup. Designed to be compatible with most vehicles and car alarm systems. Light specifications: 5-wire configuration; water-resistant ultrasonic welding; compatible with standard door modules. Fit: Designed to fit most vehicles with central locking. Check wiring compatibility and available space in your door panel before installation.

Read more less

The Car Door Lock Actuator is a heavy-duty, 2-wire system designed to add powered door locking to most vehicles. Its compact form factor and straightforward wiring help simplify retrofits. Ideal for retrofits in vehicles with manual locks or when replacing aging actuators. Works with most aftermarket car alarm installations. Heavy-duty 2-wire design for reliable, low-current operation in tight spaces Ultrasonic welded housing for water resistance and long-term durability in varying climates 360-degree rotation enables flexible mounting in driver or passenger doors with different linkage layouts High-strength internal components resist wear from frequent locking cycles Easy installation with included mounting hardware and simplified connector alignment Broad compatibility with most vehicles’ central locking systems and aftermarket alarm modules Specifications (optional): 2-wire actuator configuration; installation hardware included for quick mounting. Fit: Suitable for most vehicles with central locking and aftermarket car alarm systems.

Read more less

Turbo Timer With Digital Display Turbine Protector is a compact device designed to protect turbochargers by enabling a controlled cooldown after driving. Its digital display provides a clear countdown for easy timing. Designed for turbocharged engines in vehicles with push-start ignition, it helps reduce thermal stress after high-speed or heavy-load driving and supports engine oil longevity by encouraging a proper cooldown. Provides a controlled turbo cooldown after engine shut-off Digital countdown display for quick status checks Compatible with vehicles using push-start ignition Cable lengths available: 42 cm or 100 cm Simple, tool-free installation with basic wiring Helps protect turbo and engine oil from heat-related wear Fit: Designed for turbocharged engines with push-start ignition; verify compatibility with your vehicle’s wiring before installation.

Read more less

Metal Plated Circular Tire Valve Cap With White Diamond is a durable, low-profile valve cap designed for standard tire stems. It protects the valve core from dust and moisture while adding a subtle, decorative touch. Designed for vehicles and wheels using standard Schrader valves, it's suitable for cars, motorcycles, and most bicycles with Schrader-type rims. Check your valve type if unsure. Material: metal-plated finish in a durable silver tone Design: circular cap with a subtle white diamond accent Compatibility: standard Schrader valve stems on cars and motorcycles Protection: helps keep dirt, dust, and moisture out of the valve core Installation: screw-on, hand-tightened for simple, tool-free mounting Size: fits common valve threads; may vary with non-Schrader valves Optional specifications: Finish is nickel-plated; diamond accent is a white synthetic stone; color is silver. Fit: tighten by hand until snug; designed for standard valve threads and normal tire maintenance routines.

Read more less

Enhance your wheels with Hexagon Metal Plated Tire Valve Stem Caps. The hexagon profile and metal plating provide a durable, weather-resistant finish that protects valve stems from dust and moisture. These caps fit all standard tire air stems and are suitable for cars, motorcycles, trucks, and bicycles. A bright color range helps with quick identification during service and adds subtle style. Hexagon design with a smooth surface for easy grip during installation Metal plating offers corrosion resistance against heat, rain, and road salts Fits all standard tire air stem valves (Schrader-compatible) Available in bright colors with a wide selection Durable construction designed for outdoor use and harsh weather Tool-free installation by hand twist Fit: Fits most standard valve stems on cars, trucks, motorcycles, and bicycles.

Read more less

The Car Mouse Control Repellent Ultrasonic Rodent And Insect Guard uses variable-frequency ultrasonic waves to deter rodents and insects inside vehicles. It operates with low power consumption and is designed to minimize human exposure while in use. Ideal for cars and other small vehicles, this device suits users who park for long periods, travel with pets, or notice persistent pests. Place it in a discreet spot to help deter pests during trips and when the vehicle is idle. Variable-frequency ultrasonic waves target rodents and pests. Low power consumption supports extended, continuous operation. Waterproof, flame retardant, and high-temperature resistant housing. Operates quietly with no audible noise to vehicle occupants. Built-in power switch allows easy off when not in use. Compact, discreet design fits under seats or in a glove compartment. Material and protections: waterproof housing; flame retardant; rated for high temperatures typical in engine compartments. Designed to fit a wide range of vehicles, including most passenger cars and light trucks.

Read more less

TPMS Tire Pressure Monitor Sensor for Dodge, Jeep, and Chrysler provides a direct replacement for worn or failed sensors. Verify OE 56029398AB to confirm compatibility before purchase. The unit uses a snap-in rubber stem and a built-in button battery for autonomous operation. Ideal for tire service replacements, new tire installs, or sensor maintenance to maintain accurate tire pressure readings and reduce TPMS warnings. OE reference 56029398AB. Snap-in rubber stem enables straightforward installation. Powered by a built-in button battery. 433 MHz version available for Jeep Wrangler (2013–2014). Compatible with Chrysler, Dodge, Jeep, and Fiat models listed. Directly replaces failed sensors in TPMS-equipped vehicles. Fit: Direct replacement for Chrysler, Dodge, Jeep, and Fiat models listed, using the OE 56029398AB part and snap-in stem design.

Read more less

F Type Shock Absorber Spring Bumper, a 2-pack, supports coil springs under load to stabilize ride quality. Designed for a wide range of suspension systems and real-world road conditions. Ideal for drivers carrying heavier loads, driving on rough roads, or navigating curves where spring performance matters. It helps reduce spring bounce and keep the vehicle steadier. Reduces spring weakness under heavy load to maintain damping Improves ride comfort and stability when cornering and on uneven roads Damps absorber pumping over speed bumps, potholes, and road humps Lowers noise and vibration for a quieter cabin Protects the shock absorber and suspension from wear and oil leaks Potentially extends absorber life with proper installation Easy installation on compatible coil-spring suspensions, including lowered or adjustable setups Specifications: Spring spacing 12 mm, Spring thickness 15 mm, Spring diameter 120 mm. Fit: Works with most coil-spring setups, including lowered or adjustable springs. Check your spring spacing (12 mm), thickness (15 mm), and diameter (120 mm) for proper fit.

Read more less