Best Sellers

This replacement charging FPC connector is designed for the iPhone XR motherboard to address charging interruptions and failures. It is a compact, board-level component intended for repair of charging circuits. Use-case: replace a worn or damaged charging connector to restore consistent power transfer for daily use. Suitable for technicians or experienced DIYers who can perform solder-free or solder-based board repairs depending on their setup. Compatibility: specifically engineered for iPhone XR motherboard connection points. Function: restores charging contact between lightning port circuitry and the mainboard. Design: compact FPC form factor that integrates without altering internal layout. Inspection: pre-inspected prior to shipping to reduce the need for immediate testing. Installation: supports professional or careful DIY installation; follow ESD and safety procedures. Light specifications: flexible printed circuit connector; contact pads compatible with standard iPhone XR board traces. Fit statement: intended to replace the original charging FPC connector on iPhone XR motherboards; confirm board layout before purchase.

Read more less

This replacement Bluetooth flex cable is designed for iPhone XR models and restores internal Bluetooth connectivity after cable failure. The description focuses on fit, basic function, and installation guidance for users seeking a targeted repair part. Use case: when calls drop, Bluetooth accessories disconnect, or audio playback is unstable due to a damaged flex cable, this part provides a direct replacement to regain standard Bluetooth operation. Intended for repair technicians and experienced users performing component-level fixes. Purpose: Replacement Bluetooth flex cable for iPhone XR. Fit: Engineered to align with iPhone XR internal connectors and mounting points. Condition: Each cable inspected prior to shipment for visible defects. Function: Restores standard Bluetooth pairing, audio streaming, and accessory connectivity when installed correctly. Installation: Professional or experienced DIY installation recommended to avoid damage. Light specifications: Flex-circuit component; connector type and pad layout match iPhone XR repair requirements. Fit statement: Fits iPhone XR devices requiring replacement of the Bluetooth flex cable.

Read more less

This replacement cable is designed for iPhone XR models to restore speaker, ringer and buzzer signal connections. It provides a direct, like‑for‑like part intended to address muffled audio, absent ringtones, or intermittent speaker output. Use case: swap this cable when basic audio functions fail and you need reliable call and notification sound during daily use. It is intended for repair tasks that target the internal audio harness and is suitable for technicians or experienced DIYers who follow safe disassembly procedures. Compatibility: fits iPhone XR only for a precise internal connection. Function: replaces damaged speaker, ringer and buzzer signal cable. Material: flexible flat flex construction consistent with device internals. Condition: inspected before shipment to confirm continuity and connection points. Installation: professional or careful DIY installation recommended to avoid device damage. Light specifications: standard OEM-style flex cable length and connectors matched to iPhone XR layout; color: black flex with gold contacts. Fit statement: intended only for iPhone XR models; not compatible with other iPhone variants.

Read more less

Replacement camera lens for iPhone XR — a direct-fit back camera glass designed to restore lens clarity after scratches or cracks. Lightweight, durable material aligns with the original lens profile for seamless integration. Use case: replace a damaged iPhone XR rear lens to address blurry photos or visible cracks without replacing the entire camera module. Suitable for DIY repairs or installation by a repair technician using standard tools. Compatibility: Specifically made for iPhone XR rear-facing camera; aligns with factory mounting points. Material: Lightweight, durable optical-grade material to resist everyday handling. Fit: Precision-cut to match the XR camera aperture and mounting bezel. Installation: Compatible with common handset repair tools; adhesive-ready for straightforward replacement. Function: Restores clear imaging by replacing scratched or cracked glass that causes blurring. Light specifications: single-piece camera lens assembly; inspected for defects prior to shipping. Fit statement: Designed to fit the iPhone XR back camera; verify model before purchase.

Read more less

The iPhone XR dual SIM tray is a direct replacement part for double‑SIM iPhone XR models, designed to restore or maintain dual‑SIM functionality without modifying the device. Use this tray when your original tray is bent, damaged, or no longer securing SIM cards. It suits travelers swapping local and home SIMs, and professionals who keep work and personal lines active on one phone. Direct fit: Designed specifically for iPhone XR double‑SIM chassis for a flush, secure seat. Material: Metal and plastic composite to hold SIMs in place and resist light wear. Compatibility: Supports standard nano‑SIM sizes used in iPhone XR dual‑SIM variants. Installation: Simple replacement with basic tools; take care to avoid tray or device damage. Retention: Engineered tabs align with device slots to prevent SIM movement. Color: Matches common iPhone XR bezel colors for a subtle appearance. Specifications (light): compatible with iPhone XR double‑SIM models; material: metal/plastic; color: black or silver options. Fit statement: Intended for iPhone XR dual‑SIM units only; confirm your model before purchase.

Read more less

The iPhone XR Back Cover Replacement restores the rear panel of an iPhone XR for everyday handling and appearance. It provides a like-for-like back panel designed to match the original shape, camera cutout, and button alignments. Use case: replace a cracked, scratched, or discolored back cover to refresh the phone during daily use—commuting, office work, or casual handling—without replacing the entire device. Intended for owners who want an affordable repair option and a precise fit. Model compatibility: Designed specifically for iPhone XR (2018) dimensions and camera layout. Material: ABS plastic with a glass-look finish for scratch resistance and consistent color. Color options: Black, White, Coral, Yellow (select at checkout). Fit & alignment: Exact cutouts for camera, flash, and side buttons to maintain functionality. Condition check: Each cover inspected before shipping for surface defects. Installation: Fits for quick swaps; professional installation recommended to avoid internal damage. Light specs: approximate weight 18 g; thickness matches original XR back panel. Fit statement: Designed to replace the iPhone XR back cover and restore original fit and appearance.

Read more less

This back cover replacement is designed for the iPhone XR to restore the phone's exterior after damage or wear. It provides a straightforward option to replace a cracked or scuffed back housing while keeping the original form factor and access to ports. Use case: ideal for iPhone XR owners who want to repair cosmetic damage, preserve structural integrity, and continue everyday activities such as calling, texting, and commuting without replacing the entire device. Recommended for installation by a trained technician to reduce risk and maintain dust resistance. Compatibility: specifically made for iPhone XR models for a secure fit. Condition checked: each cover inspected prior to shipping to ensure good condition on arrival. Function: restores rear panel protection and appearance. Installation: designed for replacement by a professional service to minimize handling risks. Daily use: supports routine phone handling and helps maintain the device’s structure. Maintenance: reduces exposure of internal components when installed correctly. Fit: made to match iPhone XR dimensions and mounting points for a proper fit when installed by a qualified technician.

Read more less

This replacement speaker restores ringer and notification sound on iPhone XS Max models with a faulty buzzer. It is designed as a direct fit for the XS Max to bring back audible alerts used in everyday routines. Use-case: replace a worn or damaged ringer buzzer to recover missed calls and notifications during meetings, commutes, or while exercising. Intended for users who need a practical repair part rather than a full device replacement. Compatibility: specifically for iPhone XS Max (model A1921/A2101/A2102 variants). Material: precision-molded components with metal contacts and polymer housing for connector alignment. Color: black/metal finish to match internal assemblies. Condition: inspected units to ensure proper electrical continuity before shipping. Installation: requires professional or experienced technician installation to avoid damage. Light specifications: dimensions match XS Max internal speaker bay; standard flex cable connector; weighs under 5 g. Fit statement: fits iPhone XS Max models only; confirm model number before ordering.

Read more less

Waterproof adhesive stickers for iPhone XR provide a practical replacement seal for the device's chassis. These thin, waterproof sealing strips are designed to restore a moisture barrier after the original adhesive is damaged or removed. Use cases: repair at home or in a service shop after a screen or battery replacement, following drops, or when the original seal shows gaps. Suitable for commuters, field technicians, and users who want to maintain resistance to everyday moisture during workouts, light rain, or kitchen use. Compatibility: Designed specifically for iPhone XR frame dimensions and port openings. Material: Waterproof polymer adhesive that bonds to metal and glass edges. Form factor: Pre-cut strips for front chassis sealing; thin profile preserves fit. Condition: Individually inspected before packaging. Application: Requires careful alignment; use fine tools or professional assistance if unsure. Light specifications: Color: black; thickness: approximately 0.3–0.6 mm; package contains multiple strips sufficient for one repair. Fit statement: Intended for iPhone XR only; not compatible with other iPhone models. Follow device repair guidance when applying.

Read more less

This replacement WiFi flex cable fits the iPhone XS Max and is intended to address weak or intermittent WiFi connections caused by a damaged internal cable. The part is designed for direct replacement inside the device and is supplied pre-inspected for basic quality checks. Use case: swap the cable when your XS Max shows low signal strength, frequent disconnects, or inconsistent network performance during daily tasks like email, streaming, navigation, and app use. Intended for technicians or experienced DIYers; professional installation is recommended to avoid damage. Compatibility: Designed specifically for iPhone XS Max models. Material & form: Flexible printed ribbon cable with integrated connectors sized for factory routing. Color: Standard black/brown flex material matching internal components. Pre-inspected: Basic functionality check prior to shipping. Installation note: Requires device disassembly and proper ESD precautions. Light specifications: Flex cable length and connector pitch match iPhone XS Max internal layout (exact mm values vary by batch). Fit statement: Fits standard iPhone XS Max; not compatible with other iPhone models.

Read more less

This replacement infrared FPC flex cable is designed for the iPhone XR to restore sensor and display connectivity during repairs. It provides a direct-fit component that aligns with the phone’s internal layout for straightforward installation. Use case: for technicians or experienced DIY users addressing unresponsive sensors, display issues, or connector faults. Compatible with standard repair tools; professional installation is recommended to avoid damage to nearby components. Model compatibility: specifically matched to iPhone XR internal connectors and mounting points. Function: replaces faulty infrared/sensor flex connection to re-establish signal paths for related components. Material: flexible printed circuit (FPC) construction with a lightweight, durable substrate for repeated handling. Condition: pre-inspected prior to shipping to reduce the chance of immediate defects on arrival. Installation: compatible with standard repair toolkits; alignment tabs and connector pads sized to OEM layout. Color: stock flex finish (typically black/brown film with gold contacts). Light specifications: single-unit cable, OEM-style connector pitch, designed for iPhone XR. Fit statement: fits iPhone XR only; confirm your model before purchase.

Read more less

This replacement vibrating motor restores vibration function for the iPhone XS Max. It is intended as a direct-fit component for devices with a nonworking or weak vibration mechanism. Use cases include missed call or message alerts and tactile feedback loss during silent mode. Installing this part can return standard vibration alerts without replacing the phone; professional installation is recommended to avoid damage. Compatibility: Designed for iPhone XS Max models for a precise fit. Function: Restores vibration alerts and haptic feedback for notifications and calls. Design: Compact form factor integrates into the existing internal layout. Installation: Intended for repair by technicians or experienced users; follow repair guides. Condition: Inspected prior to shipping to confirm operation. Light specifications: Replacement vibrating motor for iPhone XS Max; connector and mounting points match original part. Fit statement: Fits iPhone XS Max devices; confirm model number before purchase.

Read more less

This replacement flex cable restores volume and power button function on iPhone XS and iPhone XR. It is a practical spare part for devices showing unresponsive, sticky, or intermittent button behavior. Use case: replace a damaged or worn button cable to recover normal on-device control during calls, media playback, and system navigation. Suitable for users repairing a single handset or technicians handling everyday device maintenance. Compatibility: Designed for iPhone XS and iPhone XR models (fits factory connector layout). Material: flexible printed cable with metal contact pads and connector end. Color: black flex cable with integrated button contacts. Included: one replacement flex cable, pre-tested for continuity. Benefit: restores mechanical button input without replacing the entire housing. Specifications (light): one-piece flex cable; pre-attached contact pads; OEM-style connector form factor. Fit statement: intended to replace the original button flex on iPhone XS/XR only; verify model before installation and consider professional repair to avoid device damage.

Read more less

This iPhone XR screen replacement restores a damaged display to practical, everyday use without altering device functions. Use case: replace a cracked or unresponsive iPhone XR screen to recover readability and touch response for tasks like email, navigation, video viewing, and mobile work. Display type: 6.1-inch Liquid Retina HD LCD, 1792 x 828 pixels for clear text and images. Color and tone: Wide color (P3) support with True Tone to adapt color temperature to ambient light. Interaction: Haptic Touch support for tap-and-hold actions and consistent touch feedback. Compatibility: Fits standard iPhone XR models; designed to match original form factor and connector layout. Installation: Intended for repair use; retains front-panel dimensions and button/camera clearances for OEM alignment. Light specifications: 1400:1 contrast ratio and up to 625 nits brightness for daytime visibility and balanced contrast. Fit statement: Intended to replace the original iPhone XR screen — check model number before purchase to confirm compatibility.

Read more less

This replacement charging flex cable is designed for the iPhone XS Max to address charging port failures such as intermittent power, loose connections, or an unresponsive port. Use it for at-home repairs or as a technician-supplied part when restoring daily charging functionality. The cable is intended for standard repair workflows and is best installed by someone familiar with small electronics to avoid device damage. Compatibility: Fits iPhone XS Max models only. Function: Replaces damaged charging port flex cable to restore charging and data connection. Design: OEM-style flex ribbon with pre-aligned connector and mounting points for a precise fit. Condition: Inspected for compatibility and physical condition prior to shipping. Materials: Flexible PCB and standard connector housing in black/gold finish. Light specifications: flex cable length ~45–55 mm (installed footprint), connector type: Lightning contact assembly. Fit statement: Designed to fit iPhone XS Max internal layout; confirm model before purchase. Professional installation recommended.

Read more less

This iPhone XS microphone replacement restores the handset's primary mic used for calls, video chat and voice memos. It is a direct-fit microphone module designed specifically for the iPhone XS chassis. Use case: replace a muffled or non-functional mic to regain clear audio during phone calls, FaceTime, and recordings. Intended for technicians or experienced DIYers; professional installation is recommended to avoid damage during disassembly. Compatibility: Designed for standard iPhone XS models (not compatible with iPhone XS Max or XR). Function: Restores primary microphone pickup for voice calls, speakerphone and app recordings. Construction: OEM-style microphone module with flex cable and connector for direct board replacement. Color: Black/silver components to match internal phone finish. Testing: Individual unit functionality verified before listing. Light specifications: microphone module size matches factory part; connector type: iPhone XS flex connector. Fit statement: Intended only for iPhone XS internal replacement; verify model number before purchase.

Read more less

Replacement WiFi antenna flex cable for iPhone XS provides a direct repair option to address weak or intermittent wireless connectivity. Use this flex cable when your iPhone XS shows low signal bars, dropped WiFi connections while browsing or streaming, or inconsistent network performance during everyday tasks. Designed for iPhone XS — OEM form-factor flex to match internal mounting points. Restores antenna path for 2.4/5 GHz WiFi when the original cable is damaged or detached. Flexible polyimide substrate with copper traces for reliable electrical connection inside the chassis. Compact, low-profile design integrates with existing shielding and frame without modification. Inspected before shipping; recommended professional installation to avoid connector or board damage. Light specifications: compatibility — iPhone XS only; color — black/brown flex; material — polyimide film with metal traces; approximate dimensions — OEM internal size (matches original part). Fit statement: Intended to fit iPhone XS models only; not compatible with other iPhone generations or variants.

Read more less

This Replacement Earpiece for iPhone XS Max restores the phone's top-front speaker function for calls and media playback. Designed for direct compatibility with the iPhone XS Max, it replaces a worn or faulty earpiece assembly. Use it when reduced call volume, distortion, or intermittent sound affects daily communication. Typical scenarios include work calls, navigation prompts, and hands-free conversations where clear voice playback is required. Professional installation is recommended to avoid damage during disassembly. Compatibility: Specifically for iPhone XS Max (model-specific fit). Function: Restores earpiece speaker for voice calls and near-ear audio. Condition: Replacement assembly pre-inspected to reduce installation issues. Installation: Intended for repair technicians or experienced users; tools and adhesive not included. Integration: Fits into existing front chassis and works with original connectors. Light specifications: speaker assembly only; not a full display or front-camera module. Fit statement: Designed to match OEM mounting points for the iPhone XS Max; verify model before ordering.

Read more less

Replace a damaged iPhone XR back cover with a practical, lightweight replacement designed to restore the phone's exterior and everyday handling. Use case: suitable for users repairing cracked or worn housing who want a cost-effective option to extend device life. Intended for DIY or professional installation to return the phone to normal daily use and protect against scratches and surface wear. Compatibility: Designed specifically for standard iPhone XR models. Fit: Precise cutouts for camera, flash and button access to maintain original functionality. Design: Lightweight profile that matches the device silhouette and handling. Condition: Inspected prior to dispatch to ensure the cover arrives without visible defects. Installation: Facilitates replacement of the rear housing; professional installation recommended to avoid internal damage. Specifications (light): Back housing sized for iPhone XR; replaces rear exterior panel. Fit statement: Fits standard iPhone XR models only; not compatible with other iPhone sizes or variants.

Read more less

The replacement flex cable for iPhone XS is a direct-fit charging port flex assembly intended to address charging and connector issues on iPhone XS devices. Use this part when an iPhone XS exhibits intermittent charging, loose connector feel, or no charge at the port. It is suited for technicians or experienced DIYers performing board-level repairs and basic charging-port replacements. Compatibility: Designed specifically for iPhone XS models (does not fit other iPhone versions). Function: Replaces the charging port flex cable to restore connector alignment and charge transfer. Condition: Individually inspected before shipment to confirm intact contacts and flex integrity. Installation: Intended for users with repair experience; follow ESD precautions and proper disassembly guides. Form factor: Flexible printed circuit designed to match OEM routing and mounting points. Light specifications: Flex cable assembly, connector type matched to iPhone XS; color varies by batch (typically black/gray). Fit statement: Fits iPhone XS only; verify model (A1920/A2097/A2098) before purchase.

Read more less

This flex cable is a replacement part for the power and volume buttons on the iPhone 13 Pro Max. It restores button signaling when original traces or connectors wear out, offering a targeted repair option without replacing the whole device. Use case: when side buttons become unresponsive during calls, media playback, or screen locking, swapping this iPhone 13 Pro Max power/volume flex cable can reinstate normal controls. Intended for technicians or experienced DIYers; professional installation is recommended for reliable seating and connector alignment. Function: Replaces power and volume button flex for iPhone 13 Pro Max. Compatibility: Designed specifically to match the 13 Pro Max housing and connector layout. Material: Flexible polyimide ribbon with plated contacts for circuit continuity. Inspection: Each cable is checked for basic electrical continuity before shipping. Installation: Fits standard repair procedures; requires appropriate tools and ESD precautions. Light specifications: Length ~45 mm, connector type matches OEM flex socket, color: black/brown ribbon. Fit statement: Compatible only with iPhone 13 Pro Max models; verify device model before purchase.

Read more less

Replacement speaker ringer for iPhone XS designed to restore ringtone and alert audio when the original component is worn or silent. Use case: swap this module into an iPhone XS to address muffled sound, intermittent ringing, or no ringer during calls and notifications. Intended for routine daily use where clear alert audio is required. Compatibility: Exact match for iPhone XS models; connects to existing internal hardware without external adapters. Condition: Inspected before shipping to confirm functionality and free movement of contacts. Function: Restores ringtones, notification alerts, and system sounds. Installation: Intended for professional or experienced repair; follow device disassembly guides to avoid damage. Design: Compact internal module sized for the iPhone XS chassis and pickup openings. Light specifications: internal speaker ringer module; connector type and placement match iPhone XS layout. Fit statement: Fits iPhone XS only; not compatible with other iPhone models.

Read more less

This optically clear OCA adhesive is designed for iPhone XS Max screen repairs, replacing the damaged adhesive layer to restore screen clarity and touch response. It is intended for DIY or technician use where a precise fit for the XS Max is required. Use case: when a cracked or separated display causes light bleed, reduced touch sensitivity, or visible gaps, this adhesive provides a replacement layer to re-bond the glass and digitizer for continued daily use like scrolling, calls, and video playback. Compatibility: specifically sized for iPhone XS Max front assemblies. Material: optically clear OCA film to maintain visibility and brightness. Touch retention: formulated to preserve capacitive touch sensitivity. Handling: compact sheet, easy to position during repair. Quality check: each sheet inspected for defects prior to dispatch. Light specifications: standard OCA sheet cut to XS Max screen dimensions; single-layer adhesive film. Fit: designed to match the iPhone XS Max display; professional installation is recommended for consistent alignment and performance.

Read more less

This replacement WiFi flex cable restores the internal antenna connection on the iPhone XS to address intermittent wireless dropouts. It is intended as a direct part swap for devices exhibiting WiFi disconnects or weak signal behavior. Use cases include restoring stable home or office connections, improving streaming and video calls, and avoiding full-board replacements when the issue is isolated to the flex cable. Intended for technicians or experienced DIYers; professional installation is recommended to avoid device damage. Compatibility: Designed specifically for iPhone XS. Function: Replaces internal WiFi flex cable to re-establish antenna continuity. Condition: Inspected before shipping to confirm fit and basic operation. Benefit: Targets a single-point failure to reduce repair cost and turnaround. Installation note: Requires precision tools and ESD-safe handling. Light specifications: replacement flex cable part for iPhone XS; color and connector layout match stock component. Fit statement: Fits iPhone XS models only; not compatible with other iPhone sizes or generations.

Read more less