Best Sellers

Adhesive waterproof stickers for iPhone 13 provide a practical replacement for worn or damaged internal seals that affect everyday water resistance. Use-case: replace the original adhesive after drops, exposure to rain, or general wear to restore the device's basic protection for routine scenarios like spills and light moisture. Professional installation is recommended to ensure correct alignment. Compatibility: Designed specifically for iPhone 13 models and internal seal locations. Material: Thin, flexible waterproof adhesive film that conforms to device contours. Color: Neutral matte finish to match internal housing without adding bulk. Condition: Individually inspected prior to packaging for fit and adhesion. Ease of use: Lightweight design intended for straightforward replacement with careful handling. Purpose: Restores basic moisture resistance for everyday exposure; not a substitute for full water damage repair. Light specifications: approx. original OEM dimensions for iPhone 13 internal seal; single-piece set. Fit statement: made to match iPhone 13 internal seal geometry—verify model before purchase.

Read more less

Replacement back cover kit for the iPhone 13 designed to restore the phone’s exterior and core button functions. This kit includes the back glass assembly, side buttons, card tray, flex cables, and a wireless charging module for retained wireless charging capability. Use case: replace a cracked or scratched rear panel, restore unresponsive power/volume keys, or recover wireless charging after damage. Suited for users repairing a single iPhone 13 at home or technicians performing routine exterior repairs; professional installation is recommended to avoid damage to internal components. Complete assembly: back cover with pre-installed side keys and card tray for alignment. Included flex cables: power and volume flexes to restore button responsiveness. Wireless module: retains Qi charging function when fitted correctly. Pre-checked parts: components inspected to reduce common replacement issues. Color options: available in factory-matched finishes to maintain original look. Light specifications: fits iPhone 13; material: glass/aluminum frame; color: model-dependent. Fit: designed specifically for the iPhone 13 to match original alignment and mounting points.

Read more less

This replacement connector is made for the iPhone 13 to restore charging connections without replacing the whole device. Use it when the charging port shows intermittent contact, is loose, or stops accepting cables. Intended for users comfortable with device repair or for technicians performing a targeted fix. Professional installation is recommended to avoid damage. Compatibility: Designed for standard iPhone 13 models and port layout. Fit and alignment: Precision contacts and housing match the phone’s connector geometry for a direct swap. Durability: Compact replacement built for everyday handling and cable insertion cycles. Condition on arrival: Inspected for visible defects prior to shipping. Installation: Supports standard replacement procedures; recommend ESD precautions and proper tools. Light specifications: connector assembly for iPhone 13 charging port; compact form factor suitable for in-device mounting. Fit statement: Intended to replace the original iPhone 13 charging connector; confirm model and port variant before ordering.

Read more less

Replacement iPhone 13 charging flex cable — direct swap part for the Lightning port assembly designed to restore charging and data connectivity on iPhone 13 models. Use this flex cable when the device no longer charges reliably or the port shows loose connections. Suited for DIY technicians and repair shops that perform component-level fixes to recover daily phone functions like calls, navigation, and email. Direct replacement for iPhone 13 charging port flex cable; aligns with original connector layout. Lightweight flex material with reinforced contact pads to resist wear from repeated cable insertion. Pre-inspected for visual defects to arrive ready for installation by a qualified technician. Supports charging and USB data transfer when installed correctly; maintains existing device grounding. Compact form factor preserves internal component spacing and case fit. Specifications: compatible only with iPhone 13; color: black flex ribbon; single-piece assembly; standard connector type for factory alignment. Fit: designed to match iPhone 13 internal mounting points and connectors for a secure, OEM-style fit.

Read more less

This Replacement JK LCD Screen for iPhone 13 restores display functions after cracks, dead pixels, or touch failures. It is a practical repair option that keeps the original device in use without buying a new phone. Use case: install this screen when a drop or impact damages the glass or touch response. Ideal for users who need reliable call, messaging, and media playback while avoiding full-device replacement. Fits standard iPhone 13 repair workflows and can be used by experienced DIYers or technicians. Resolution: 1170 x 2532 px for clear text and images Color: True Tone support to match ambient light Touch: 120Hz touch control for responsive input Durability: High wear resistance for daily use Power: Low power consumption design to help preserve battery life Specifications (light): compatible with iPhone 13; connector layout matches factory design. Professional installation recommended to ensure proper alignment and component function. Fit statement: fits iPhone 13 models when installed correctly; verify model number before purchase.

Read more less

This replacement back housing cover restores the exterior of an iPhone 13, intended to replace scratched, cracked or discolored rear panels and return the phone to regular daily use. Use case: swap the damaged back panel to maintain functionality and appearance for texting, browsing and everyday tasks without replacing the whole device. Professional installation is recommended to ensure correct alignment and avoid assembly issues. Direct replacement: Designed for iPhone 13 models for precise alignment with ports and buttons. Restores appearance: Addresses scratches, cracks, dents and discoloration to refresh the device exterior. Fit-focused design: Matches original back housing dimensions to retain camera and button clearances. Pre-inspected: Arrives checked to reduce the chance of immediate defects on delivery. Maintenance alternative: Extends usable life of an existing iPhone 13 without a full device upgrade. Light specs: Compatible specifically with iPhone 13. No other model compatibility implied. Fit statement: Intended to replace the original iPhone 13 back cover and fit the device as a like-for-like housing component.

Read more less

Replacement dustproof mesh for iPhone 13 earpiece speaker designed to block particles while allowing sound transmission. The component is a lightweight, fine mesh insert intended for everyday protection and maintenance. Use case: suitable for users who frequently carry their phone in dusty pockets, work in workshops, or use the device outdoors. Installing the mesh reduces visible dust build-up in the earpiece and minimizes the need for repeated deep cleanings. Material: fine mesh insert that permits voice and call audio to pass through. Compatibility: designed specifically for iPhone 13 earpiece dimensions. Installation: direct replacement for worn or damaged earpiece mesh; small adhesive frame for secure fit. Design: low-profile and lightweight to remain discreet behind the earpiece grille. Maintenance: simple to replace; avoids repeated contact with internal speaker components. Light specifications: single-piece mesh, precise cut for iPhone 13 earpiece opening. Fit statement: fits iPhone 13 models only; not compatible with other iPhone versions.

Read more less

Replacement screws for iPhone 13 charging ports provide a practical option for simple repairs at home. These precision-engineered parts are intended to restore secure fastening where a loose charging port affects charging or data transfer. Use case: ideal for users who perform basic device maintenance, address loose port assemblies, or reassemble an iPhone 13 after a battery or port replacement. Suited to DIY repairs, phone technicians with a small-parts workflow, and anyone seeking a targeted fix without full component replacement. Compatibility: Designed specifically for iPhone 13 models and port assemblies. Fit: Precision fit to align with factory mounting points and threaded inserts. Handling: Sized for easy placement with standard electronics screwdrivers and tweezers. Function: Restores secure fastening to reduce movement and intermittent charging issues. Versatility: Usable in related minor internal repairs where identical screw form factor is required. Light specifications: replacement screws only; verify screw head type and quantity before beginning repair. Fit statement: intended for iPhone 13 charging port assemblies—confirm model compatibility before installation.

Read more less

This replacement flex cable is made for iPhone 13 repairs and connects the NFC coil, power, and volume assemblies. It is a compact flex ribbon designed to restore button response and NFC functionality without replacing the whole device. Use-case: suitable for technicians or experienced DIYers repairing an iPhone 13 after drops, liquid exposure, or wear that causes unresponsive power/volume buttons or intermittent NFC. Intended for targeted repairs where the issue is isolated to the flex assembly; professional installation is recommended to avoid incidental damage. Compatibility: iPhone 13 models (original internal layout) Functions: NFC coil connection, power button, volume up/down Construction: flexible printed circuit with plated contacts for solder or connector mating Color: standard black/brown flex ribbon Condition: pre-checked to reduce common installation errors Specifications (light): length ~45–55 mm, weight <5 g. Fit statement: Designed to fit the iPhone 13 internal frame and align with original mounting points.

Read more less

The iPhone 13 SIM card tray is a direct replacement part for managing single or dual SIM setups on iPhone 13 models. It provides a secure slot for standard nano‑SIMs and enables routine card swaps without adding bulk. Designed for travelers, remote workers, and users who keep separate personal and business lines, the tray simplifies switching carriers or local SIMs. Handle gently; professional installation is recommended to avoid damage to the phone or tray. Compatibility: Fits iPhone 13 model series (single and dual SIM versions). Material: Durable construction to resist regular insertion/removal. Form factor: Compact, weight-neutral replacement that aligns with original tray dimensions. Function: Accepts standard nano‑SIM cards for quick swaps. Maintenance: Small footprint that does not interfere with case fit or wireless signals when installed correctly. Light specifications: standard nano‑SIM slot size; thickness and pin alignment match factory tolerances. Fit statement: Intended for iPhone 13 units only; verify model before purchase to ensure correct fit.

Read more less

This Replacement Flex Cable for iPhone 13 Pro Daily Repairs restores charging connection for iPhone 13 Pro units with worn or damaged charging ports. It is a direct replacement part designed to match the original flex cable form and function. Use cases: swap this flex cable when the device charges intermittently, only charges in certain positions, or shows physical port damage. Intended for experienced DIY repairers and professional technicians who need a targeted repair rather than a full device replacement. Compatibility: specifically for iPhone 13 Pro models (not Pro Max or other generations) Function: supports standard charging and data connection when installed correctly Condition: pre-inspected before shipment to confirm functionality Material: flex PCB with integrated port assembly and connector pads Installation: requires careful disassembly and proper grounding to avoid damage Light specifications: color—black/metallic connector; dimensions match factory flex layout. Fit statement: intended to replace the original iPhone 13 Pro charging flex cable; verify model number before purchase.

Read more less

The Essential SIM Card Tray is a direct replacement designed for iPhone 13 models to restore access to your SIM card and maintain daily mobile connectivity. Use case: replace a bent, stuck, or missing tray to enable carrier changes, travel SIM swaps, and routine tasks like calling or mobile data without interrupting your schedule. Installation by a technician is recommended to avoid damage. Compatibility: Specifically sized for iPhone 13 model series (mini, standard, Pro, Pro Max) for correct alignment. Material: Lightweight metal alloy matching original tray strength and magnetic properties. Color: OEM-matched finishes available to match device color (black, silver, or graphite). Function: Precise SIM slot sizing for nano-SIM cards; supports easy insertion and removal once installed. Fit: Compact dimensions mirror the original tray to preserve internal spacing and case fit. Light specifications: tray dimensions follow factory tolerances; accepts standard nano-SIM cards. Fit statement: Designed to fit iPhone 13 series models; verify model before purchase. Professional installation advised.

Read more less

This front glass replacement is designed for the iPhone 13 Pro and includes an outer glass lens with OCA adhesive for re-bonding to the display assembly. It is intended for users who can perform basic at-home repairs and want a direct replacement for cracked or scratched front glass. Use case: replace a cracked or unresponsive front glass to restore touch access for calls, browsing and apps while retaining the original display and internal components. The kit is useful for DIY repairs, small repair shops, and anyone needing a quick front-glass swap while awaiting professional service. Compatibility: specifically for iPhone 13 Pro (model-specific fit). Included: outer glass lens with pre-applied OCA adhesive for bonding. Material: tempered front glass designed for touch-screen coverage. Installation: reduces air bubbles when aligned; inspect and test before final assembly. Quality check: pre-checked for defects prior to shipping. Light specifications: front outer glass lens, OCA adhesive included. Fit: fits only iPhone 13 Pro; not compatible with other iPhone 13 series sizes. Handle with ESD precautions and avoid bending display cables during installation.

Read more less

This replacement flex cable restores charging port connection and GPS signal routing in an iPhone 13 Pro. It is a direct-fit component designed to address connectivity issues without modifying other internal parts. Use case: swap the flex cable when the device shows intermittent charging, fails to register a charger, or reports degraded GPS accuracy during navigation. The part is intended for technicians or experienced DIYers and is most useful when troubleshooting port or signal failures before replacing larger assemblies. Compatibility: specifically for iPhone 13 Pro (model-specific fit). Function: replaces charging port flex and GPS signal flex paths. Condition: inspected prior to sale to verify connectors and traces. Installation: designed for straightforward replacement with standard iPhone tools. Benefit: restores original connection routes to help recover charging and GPS behavior. Light specifications: flex cable assembly, plated connector contacts, flex PCB construction. No external accessories included. Fit statement: fits iPhone 13 Pro only; confirm model number before purchase.

Read more less

iPhone 13 Pro back cover replacement designed for a direct, secure fit with the iPhone 13 Pro model. This single-piece rear glass/panel restores the phone's exterior and maintains access to the camera module and side buttons. Use case: replace a cracked or scratched back after drops or daily wear to protect internal components from dust and minor impacts. Suitable for self-repairs by users familiar with small electronics or for technician installation. Precision fit for iPhone 13 Pro dimensions and camera cutout Material: durable glass with reinforced frame to match original specs Color: available in original-style finishes to match device aesthetics Simple swap process with common repair tools; adhesive-ready edges Restores structural protection and appearance without full-device replacement Light specifications: single rear cover, compatible with wireless charging when properly installed; weight and thickness match OEM tolerances. Fit statement: designed specifically for iPhone 13 Pro—verify model before purchase.

Read more less

This replacement SIM card reader is designed for iPhone 13 devices to restore dual-SIM functionality after a damaged or worn SIM slot. Use it when you need reliable SIM swaps during travel, managing separate work and personal numbers, or after repair. The part supports the iPhone 13 dual-SIM setup and is intended for installation by a technician or experienced user. Direct replacement: Fits the iPhone 13 SIM assembly location for straightforward part-to-part replacement. Electrical contacts: Precision contact points recover signal connection between SIM and phone circuitry. Compact form: Low-profile module designed to align with the device’s internal tray and chassis. Durable housing: Enclosed housing protects contacts during insertion and removal of SIM cards. Pre-inspected: Each unit is checked for continuity to reduce installation troubleshooting. Specifications (light): compatible with iPhone 13 models; supports dual-SIM operation; intended as a hardware replacement part. Fit statement: Intended specifically for iPhone 13; confirm model before ordering to ensure proper fit and compatibility.

Read more less

The replacement back camera lens for iPhone 13 restores the exterior glass cover for the dual rear camera array, helping recover image clarity after chips, cracks, or deep scratches. Use this lens when cracked glass impacts focus, causes glare, or exposes the camera module to dust and moisture. It's intended for DIY repairs or technician replacement to extend device service life without full-unit replacement. Exact fit: Designed to match iPhone 13 camera aperture and mounting points for a flush installation. Material: Toughened optical glass to protect sensors while maintaining light transmission. Finish: Color-matched to standard iPhone 13 rear panel to blend with the original chassis. Protective function: Shields internal lens and sensor from scratches and particulate ingress. Inspection: Each lens is visually checked for defects prior to packaging. Specifications (light): single back camera glass, compatible with standard iPhone 13 models; diameter and mounting aligned to factory dimensions. Fit statement: Intended for standard iPhone 13 units only; professional installation recommended to ensure correct alignment and sealing.

Read more less

Essential Foam Pads for iPhone 13 Camera protect the front camera area on iPhone 13, 13 mini, 13 Pro and 13 Pro Max with a slim, low-profile barrier. The pads are cut to align with the small ring size around the front camera and preserve touch and sensor function. Use case: carry your phone in pockets, bags or outdoor gear where keys, coins or minor drops can nick the lens. These foam pads absorb light impacts and reduce direct contact with surfaces when the device is placed face-down. Material: closed-cell foam for light shock absorption and dust resistance. Size: custom die-cut to the front camera ring on iPhone 13 series. Color: matte black to blend with most device bezels. Installation: peel-and-stick adhesive; repositioning limited after application. Compatibility: fits iPhone 13, 13 mini, 13 Pro, 13 Pro Max front camera rings. Specifications (light): thickness ~0.8 mm; weight <1 g per pad; material: polyurethane foam. Fit statement: designed for precise alignment with iPhone 13 front camera rings; verify fit on your model before final placement.

Read more less

Replacement back camera lens for iPhone 13 Pro designed to restore camera clarity after scratches or cracks. This glass lens matches the original camera opening and maintains the phone's aesthetic with a black rim and clear cover. Use cases: replace a scratched lens before photographing family events, outdoor scenes, or during video calls; suitable for DIY repair or technician installation to avoid shadowing, focus issues, or lens flare caused by surface damage. Material: tempered optical glass with metal-aligned rim for consistent seating. Compatibility: fits iPhone 13 Pro only (three-camera module layout). Finish: black exterior ring to match original housing. Design: lightweight, low-profile replacement that sits flush with the rear panel. Installation: adhesive-ready; professional installation recommended to ensure dust-free fit. Light specifications: single-piece glass, approximate outer diameter aligned to iPhone 13 Pro camera module; exact dimensions match factory tolerances. Fit statement: intended specifically for iPhone 13 Pro models and not compatible with iPhone 13, 13 Mini, or 13 Pro Max.

Read more less

This low-profile dustproof earpiece mesh is a replacement part designed for the iPhone 13 Pro. It provides a simple barrier to prevent debris from blocking the front earpiece speaker while preserving handset fit and form. Use case: install during routine phone maintenance or repair to reduce muffled call audio caused by lint, dust or small particles. Suitable for technicians and experienced DIYers who replace front-facing components and want a noninvasive way to maintain call clarity. Compatibility: Specifically sized for iPhone 13 Pro earpiece speaker housing. Design: Low-profile mesh that sits flush with the speaker opening to avoid added bulk. Function: Blocks dust and small particles while allowing sound transmission for voice calls. Installation: Intended for professional or experienced installation; adhesive or fitment aligns with original speaker frame. Durability: Lightweight construction intended to maintain performance over normal daily use. Specifications: replacement earpiece mesh for iPhone 13 Pro; single-piece pack. Fit: Precise cut for the iPhone 13 Pro earpiece—confirm phone model before purchase.

Read more less

This replacement back camera lens for the iPhone 13 Pro Max provides a direct, like-for-like part to address cracked or scratched rear camera glass. Use this lens when your phone shows blurred or obstructed photos from surface damage. It is suited to everyday users who need clear images for travel snapshots, work documentation, or social sharing without replacing the whole device. Compatibility: Designed specifically for iPhone 13 Pro Max models. Material: Tempered optical glass with a metal mounting ring for secure seating. Color: Matches factory finish (space black/silver variants available depending on model). Fit: OEM-style dimensions for a flush, precise fit with factory camera assembly. Benefit: Restores clear light transmission to reduce blur and flare from damaged outer glass. Light specifications: outer diameter ~12 mm, thickness ~0.6 mm; single-piece glass lens. Fit statement: Fits iPhone 13 Pro Max only; professional installation recommended to maintain water resistance and alignment.

Read more less

Replacement screws for iPhone 13 Pro repairs provide the specific fasteners needed when securing the charging port or bottom assembly during device maintenance. Use these screws for at-home troubleshooting, small component replacements, or when reassembling after screen or port work. Intended for users comfortable with basic DIY repair steps; professional installation is recommended if unsure. Model compatibility: Designed for iPhone 13 Pro charging port and bottom assembly components. Quantity: Set includes the essential screws used in standard charging-port reassembly. Material and finish: Metal screws with a corrosion-resistant coating for typical handheld device environments. Size: Precision-sized to match factory screw holes (small Phillips/tri-point heads where applicable). Handling: Compact, lightweight set packaged for easy storage and transport. Light specifications: Exact screw diameters and head types vary by assembly; check measurements before installation. Fit: Fits iPhone 13 Pro charging-port assemblies only; not compatible with other iPhone models.

Read more less

The iPhone 13 Screen Replacement for Everyday Mobile Use is a direct-fit display assembly designed to restore a damaged 6.1‑inch iPhone 13 screen without replacing the whole device. Use this kit to recover touchscreen function and visual clarity after cracks or display failure. It suits at-home repairs or professional service and addresses common needs like restored app visibility, accurate color for photos, and reliable touch response. Display: 6.1-inch OLED, 2532 × 1170 pixels for native resolution. Color & Brightness: True Tone and HDR support to maintain matched color temperature and dynamic range. Compatibility: Fits standard iPhone 13 models (not iPhone 13 mini or Pro/Pro Max variants). Installation notes: Pre-installation testing recommended; protect flex cables and avoid sharp bends. Use cases: Suitable for users replacing cracked glass, unresponsive touch, or dim displays to extend device service life. Light specifications: OLED panel, native resolution, True Tone/HDR enabled, standard iPhone 13 connector layout. Fit: Designed for standard iPhone 13 dimensions and connector positions; verify model before ordering.

Read more less

This replacement flex cable restores the volume and power button connections on the iPhone 13 Pro. Designed for direct replacement, it addresses unresponsive or intermittent button behavior caused by wear or accidental damage. Use case: suitable for DIY repairs or technician replacement when volume controls, mute toggle, or the side power button stop responding. Restores routine tasks like adjusting call volume, taking screenshots, and powering the device on/off. Compatibility: iPhone 13 Pro (standard model) Function: replaces volume up/down and side power button flex cable Material: flexible printed circuit with connector pads for factory-style fit Color: black flex ribbon matching original internal components Installation: requires device opening and screw/midframe access; intended for users with repair experience Light specifications: single flex assembly, OEM-style connector pitch, weight under 5 g. Fit statement: Fits iPhone 13 Pro models without modification when installed according to repair guides.

Read more less