Best Sellers

This charging stand is designed to keep an iPhone 13 Pro Max charged during everyday home routines. It offers a compact, stable platform for desk or nightstand use and a one‑cable setup for simple integration. Use it while working, streaming, or sleeping to maintain battery level without repeatedly plugging and unplugging. Compatibility with iPhone 13 Pro Max ensures a secure fit and efficient power transfer for calls, messages, and media. Fast charging: Supports up to 15W to shorten charging time between uses. Secure fit: Designed for iPhone 13 Pro Max dimensions to reduce slipping on flat surfaces. Stable footprint: Low-profile base suited to desks, nightstands, and kitchen counters. One-cable setup: Single USB connection simplifies installation and cable management. Battery safeguards: Built-in protection against overcharging to help preserve battery cycles. Light specifications: compatible device—iPhone 13 Pro Max; power delivery—up to 15W; connection—single cable (USB). Fit statement: Intended for home use with iPhone 13 Pro Max; not specified for other models or car/industrial use.

Read more less

The JK inell LCD screen is a replacement display designed for everyday iPhone 14 repairs, restoring touch and viewing functions after damage. For DIY repairs or technician swaps, this panel addresses cracked glass, dead pixels, and unresponsive touch. It supports routine phone activities—calls, messaging, web browsing, and media—when installed with standard repair tools. 120Hz touch control for responsive scrolling and gestures True Tone compatibility to adapt white balance to ambient light Wide color gamut for more accurate image and video rendering High wear resistance coating to reduce abrasion from daily use Optimized for lower power draw to help preserve battery runtime Light specifications: 1284 × 2778 resolution, ~700 cd/m² peak brightness. Color and touch characteristics match iPhone 14 screen behavior when correctly calibrated. Fit statement: Designed to fit standard iPhone 14 models; requires compatible front assembly connectors and professional or experienced DIY installation for full functionality.

Read more less

This replacement SIM card tray is designed for the iPhone 14 Plus to restore a functional SIM slot when the original tray is bent, stuck, or lost. Use it to regain access to cellular service during daily routines such as commuting, travel, or temporary device repairs. It supports models with dual SIM capability and is intended for straightforward at-home installation with basic tools. Precise fit: Molded to iPhone 14 Plus dimensions for a secure, flush insertion. Dual SIM support: Compatible with units that use two SIMs or eSIM + physical SIM setups. Durable material: Metal and polymer construction resists bending from regular use. Ejector slot: Standard ejector pin opening for easy SIM removal and replacement. Simple installation: Designed for careful, tool-assisted home replacement without soldering. Specifications: Color: black or silver (model dependent); dimensions matched to iPhone 14 Plus frame; weight ~2–4 g. Fit statement: Intended specifically for iPhone 14 Plus models; verify model before purchase.

Read more less

This replacement flex cable is designed for the radar scanner sensor antenna in the iPhone 13 Pro Max, providing a targeted repair option when that specific sensor or its connection is damaged. Use this part if facial recognition, proximity sensing, or related antenna functions fail due to a damaged flex cable; a correct installation can restore those functions without replacing the entire device. Professional installation is recommended to avoid further damage. Compatibility: iPhone 13 Pro Max models only (sensor antenna flex cable). Material: flexible printed circuit (polyimide film with copper traces). Color: amber/bronze flex with metal contact pads. Included: single replacement flex cable (no tools or adhesive). Condition: inspected prior to shipping for visible defects. Light specifications: thin flex ribbon approx. OEM form factor and connector layout; lightweight, low-profile design for internal routing. Fit statement: Intended for iPhone 13 Pro Max internal repair; not compatible with other iPhone models.

Read more less

This replacement adhesive is designed for securing the iPhone 14 back cover during DIY repairs. It provides pre-cut adhesive strips sized to match the iPhone 14 back housing for a straightforward swap of rear glass or housing components. Use-case: suitable for repairing a cracked or loose back cover after a drop, preparing the device for screen or internal component work, or resealing the rear housing after part replacement. Intended for users comfortable with basic repair tools and procedures who want a practical, at-home option. Pre-cut strips shaped for iPhone 14 back housing to reduce trimming and alignment time. Easy application with peel-and-place adhesive for use with common repair tools. Inspected pieces each strip is checked for defects before packaging. Dust and moisture resistance designed to help limit ingress once sealed. Compatibility fits standard iPhone 14 models without modification. Light specifications: pre-cut adhesive strips, sold as a set for one back-cover replacement. Fit: Designed to align with iPhone 14 rear housing cutouts; verify model before installation.

Read more less

This sealing sticker is a practical replacement part for front camera LCD shading on iPhone 14 Pro and iPhone 14 Pro Max. It is an adhesive sealing sticker designed for routine at‑home maintenance and quick front‑camera area repairs. Use-case: for users who notice dust, lifting, or minor wear around the front camera opening, the sticker provides an accessible way to restore the device's protective barrier without immediate professional service. Professional installation is recommended to avoid damage during removal and fitment. Compatibility: Specifically sized for iPhone 14 Pro and 14 Pro Max front camera area. Function: Replaces worn or damaged camera sealing to help reduce dust ingress. Form factor: Thin adhesive design for flush fit under the front camera assembly. Inspection: Each sticker is checked prior to shipping for visible defects. Use case: Suited for basic at‑home repairs and maintenance enthusiasts. Light specifications: single-piece adhesive sticker; precise cut to camera aperture; sold individually. Fit statement: designed to align with factory dimensions for iPhone 14 Pro and 14 Pro Max front camera openings.

Read more less

Replacement flex cable for repairing the iPhone 13 Pro Max flashlight. Designed to restore a non-functioning flash module without replacing the whole phone, this cable targets common issues that disable the LED or flash control. Use-case: restores flashlight for everyday tasks like finding keys, navigating low-light areas, or using the camera flash. Suited for technicians and experienced DIYers who need a direct replacement part that fits standard iPhone 13 Pro Max models. Direct replacement — designed specifically for iPhone 13 Pro Max flashlight flex connection. Pre-inspected — checked for continuity and visible defects prior to packaging. Material — flexible printed circuit with solder pads matched to original connectors. Installation — intended for careful repair work; requires basic disassembly tools and soldering or connector transfer. Color — standard black/brown flex cable consistent with OEM layout. Light specifications: compatible with the iPhone 13 Pro Max LED flash assembly and camera module electrical layout. Fit: made to align with standard iPhone 13 Pro Max internal mounts and connector positions; verify model before installation.

Read more less

This SIM card tray replacement is made for iPhone 14 models to restore SIM access and simplify daily SIM management. It is intended as a direct-fit tray for standard iPhone 14 configurations and ships ready for installation. Use-case: for travelers, frequent number-switchers, or phones with damaged trays, this part enables quicker SIM swaps without altering device settings. It supports dual-SIM use patterns and reduces disruption when changing carriers or travel plans. Compatibility: Designed to fit iPhone 14 model trays and slot dimensions. Function: Enables smooth insertion/removal for nano-SIM cards and common dual‑SIM setups. Inspection: Each tray is checked for proper fit and basic operation before shipping. Installation note: Professional installation recommended to protect device seals and alignment. Durability: Built to replace damaged or bent trays and restore SIM access. Light specifications: fits standard iPhone 14 SIM slot; supports nano‑SIM and dual‑SIM configurations. Fit statement: Intended to match iPhone 14 tray dimensions—verify model compatibility before purchase.

Read more less

Adhesive stickers for Daily iPhone Screen Maintenance are designed for use with iPhone 14 and iPhone 14 Plus screens to restore a secure seal between the display assembly and chassis. The stickers use black LCD-compatible adhesive intended to match device internals and minimize visible edges. Use these adhesive strips when replacing a screen, reseating a repaired display, or addressing edge lifting caused by degraded factory adhesive. Intended for users who perform device maintenance and for repair technicians; professional installation is recommended to reduce the risk of damage. Model compatibility: iPhone 14 and 14 Plus exact-fit strips. Material: black LCD-compatible adhesive to blend with display components. Pre-inspected: arrives checked for correct cut and adhesive coverage. Application: peel-and-place strips for perimeter bonding; press to seat. Maintenance benefit: restores flush fit and reduces screen movement when applied correctly. Light specifications: perimeter adhesive strips sized to screen frame; color: black; sold as a set per unit. Fit: designed specifically for iPhone 14 and 14 Plus—check model before purchase.

Read more less

This replacement NFC coil with power and volume flex cable is made for the iPhone 13 Pro Max. The assembly combines a copper NFC coil and a polyimide flex cable in a black finish to match the handset's internal layout. Use case: swap this part when the side power button, volume controls, or NFC functionality become intermittent or unresponsive. It restores the signal paths inside the right-side frame so the phone can register button presses and NFC taps without replacing the whole device. Compatibility: iPhone 13 Pro Max (model-specific fit) Components: NFC coil, power flex, volume flex Material: copper coil, polyimide flex cable, plastic connectors Color: black flex with metal coil Installation: designed for direct replacement; professional installation recommended Light specs: approx. OEM form factor, standard connector pinout for 13 Pro Max assemblies. Fit statement: fits iPhone 13 Pro Max internal assembly layouts and replaces the original NFC/power/volume flex components.

Read more less

This replacement wireless charging coil restores wireless charging functionality for iPhone 14 models. It is a compact coil assembly designed for direct replacement inside the phone and is compatible with standard iPhone 14 form factors. Use-case: replace a failed or inconsistent wireless charging module when your iPhone 14 no longer charges on wireless pads. Suitable for experienced DIYers and repair technicians; professional installation is recommended to avoid damage to surrounding components. Compatibility: Designed specifically for iPhone 14 models (wireless charging coil replacement). Form factor: Compact assembly sized to fit the iPhone 14 internal cavity. Construction: Flexible coil mounted on a molded carrier with a neutral black/gray finish for discreet fitting. Function: Restores inductive charging alignment and contact with the wireless charging pad. Installation: Straightforward swap for those with repair experience; adhesive points match original placement. Light specifications: coil assembly; internal replacement part; weight and exact dimensions follow OEM iPhone 14 layout. Fit statement: Intended for iPhone 14 only; not compatible with other iPhone models.

Read more less

This sealing sticker is a replacement adhesive gasket for the front camera area on iPhone 14 and iPhone 14 Plus. It restores the original camera-edge seal to reduce dust and moisture ingress around the front camera assembly. Use case: for DIY maintenance, post-repair reassembly, or routine upkeep after screen or camera work. Suitable for users who want a quick, low-cost way to restore the camera-area seal without replacing larger components. Precise fit: cut to match the front camera LCD shading area on iPhone 14 and 14 Plus. Thin adhesive-backed design: lays flat under bezel for minimal thickness impact. Material: foam/adhesive composite chosen for flexibility and conforming edge seal. Easy application: peel-and-stick installation; align, press edges, and allow adhesive to set. Maintenance use: replaces damaged or missing factory sticker after repairs. Specifications (light): color: black; thickness: low-profile; compatibility: iPhone 14, iPhone 14 Plus. Fit statement: designed specifically for iPhone 14 and 14 Plus front camera assemblies; not compatible with other iPhone models.

Read more less

This Camera Lens Cover for iPhone 13 Pro Max provides a direct replacement for a damaged or worn camera lens housing. It is designed to restore the original exterior around the triple-lens module while maintaining camera functionality and alignment. Use it when your device has a cracked or scratched lens surround, or to replace a missing cover after repair. It helps reduce dust ingress and contact abrasion when carrying the phone in pockets or bags, and supports users who rely on clear optics for everyday photos. Precise fit: Molded to match iPhone 13 Pro Max camera dimensions for alignment with lenses and flash. Included retaining bracket: Bracket secures the cover to the phone frame for stable installation. Pre-checked condition: Inspected before shipping to ensure the part arrives intact and ready to install. Material: Durable polycarbonate alloy that resists everyday scratches and slight impacts. Color: Black finish matched to standard iPhone 13 Pro Max exterior. Light specifications: compatible only with iPhone 13 Pro Max; replaces outer camera housing, not internal lenses or sensors. Fit statement: Designed to fit the iPhone 13 Pro Max without altering camera operation; professional installation recommended for best alignment.

Read more less

This replacement earpiece cable for iPhone 14 restores the connection between the earpiece speaker sensor and the logic board. It targets muffled or non-working earpiece audio without replacing the entire speaker assembly. Use case: when calls, voice memos, or speaker detection fail, replacing the flex cable can resolve intermittent audio or sensor issues. Suitable for repair technicians and experienced DIYers who can perform board-level replacements. Purpose: Earpiece speaker sensor flex cable for iPhone 14 models. Contents: Cable only; earpiece speaker not included. Fit: Designed for a precise fit to iPhone 14 internal connectors. Quality: Basic functionality checks performed prior to shipping. Installation: Intended for professional or experienced repair; handle with ESD precautions. Light specifications: flex cable component, original-equivalent connector layout; color and exact length vary by production run. Fit statement: made to match iPhone 14 earpiece connections—confirm model before purchase and consult a repair guide if unsure.

Read more less

Replacement stickers for iPhone 14 and 14 Plus provide a practical way to restore front camera and LCD light sensor seals that have worn or detached. They are designed to match the original placement so the sensors function as intended after replacement. Use case: swap the damaged sticker when your front-facing camera or ambient light sensor shows erratic behavior after minor impact or adhesive failure. This option addresses a common, low-cost maintenance need without a full front-panel replacement and is suitable for users who prefer professional installation. Compatibility: Designed for iPhone 14 and iPhone 14 Plus front camera and LCD light sensor locations. Function: Restores adhesive seal and sensor alignment to reduce light leakage and misreads. Contents: Replacement stickers for front camera and LCD light sensor (set for one device). Installation: Intended for trained technicians or experienced repairers to avoid damage. Integration: Works with existing front assembly and original components. Light specifications: single-use adhesive stickers sized to OEM mounting points. Fit statement: fits only iPhone 14 and iPhone 14 Plus front camera/LCD sensor positions; confirm model before purchase.

Read more less

This replacement flex cable is designed for the iPhone 14 to address charging-port wear and intermittent connections. It provides a direct, form-fit replacement intended to restore the device's charging pathway when the original cable assembly is damaged. Use case: swap this flex cable into an iPhone 14 with loose or unreliable charging contact to re-establish a stable cable-to-board connection. It is intended for technicians or experienced DIYers and professional installation is recommended to avoid device damage. Compatibility: iPhone 14 (model-specific fit for charging port assembly) Materials: flexible printed circuit with metal contact pads and plastic housing Color: black flex with silver contact points Size: OEM-style dimensions to align with iPhone 14 chassis Condition: inspected before shipping for visible defects Light specifications: approximate flex length 45–55 mm; connector type proprietary Lightning flex assembly. Fit statement: designed to match iPhone 14 charging-port layout; verify model compatibility before purchase.

Read more less

This dustproof mesh is a replacement earpiece cover designed for the iPhone 13 Pro Max. It provides a physical barrier to dust at the phone's earpiece without altering audio routing or speaker position. Use it when you carry the phone in pockets or bags, work outdoors, or notice muffled call audio from accumulated debris. The mesh reduces particle ingress, lowering the frequency of manual cleaning and potential moisture-related dirt buildup. Designed fit: Cut to match the iPhone 13 Pro Max earpiece opening for a secure placement. Material: Fine metal/polyester mesh (single layer) that blocks dust while allowing sound transmission. Color: Black finish to match the factory earpiece aesthetic. Installation: Simple replacement procedure; professional installation can minimize risk of damage. Durability: Corrosion-resistant mesh intended for everyday handling and pocket use. Specifications: Single-piece mesh, approximate thickness 0.2–0.5 mm; sold individually. Fit: Specifically sized for the iPhone 13 Pro Max earpiece; not compatible with other models.

Read more less

These Essential Screen Welding Stickers are replacement adhesive strips for iPhone 14 and iPhone 14 Plus LCD screen mounting. They are designed to hold replacement screens in place during reassembly and maintain alignment for touchscreen and display connections. Use-case: for DIY repairs, small repair shops, or tech-savvy users replacing a cracked or malfunctioning screen. The stickers simplify reassembly after screen removal, reduce movement during connector seating, and help ensure consistent placement without specialty tools. Compatibility: iPhone 14 and iPhone 14 Plus only — cut and placement match factory anchor points. Material: thin adhesive polymer strips designed for screen mounting and moderate heat exposure during repair. Color: black finish to match OEM bezel appearance. Packaged: multiple pre-cut strips for front panel edges and corner tabs. Inspection: visually checked prior to shipping to confirm cut accuracy and adhesive coverage. Light specifications: pre-cut dimensions for both 6.1" and 6.7" front assemblies; adhesive strength rated for screen reinstallation (intended for single repair use). Fit statement: fits iPhone 14 and iPhone 14 Plus display assemblies; not compatible with other models.

Read more less

Replacement back camera for iPhone 14 designed to restore everyday photo and video capture after damage or degraded performance. Compact module fits into the rear camera assembly and is intended for use with standard repair workflows. Use case: suitable for owners who shoot family photos, quick travel snapshots, or daily documentation and need to restore imaging without replacing the whole phone. Intended for technicians or experienced DIYers; professional installation is recommended to avoid damage. Compatibility: Specifically for iPhone 14 rear camera assembly (model-specific alignment and connector). Image capture: Restores standard photo and video functions for everyday use. Form factor: Lightweight, compact replacement designed to fit original housing. Handling: Fragile optical element—handle with ESD precautions and small tools. Condition: Each unit checked for basic operation before dispatch. Specifications (light): connector type: flex cable; color: black; approximate dimensions match iPhone 14 camera cavity. Fit: replaces the iPhone 14 back camera only; verify your model before ordering.

Read more less

This Replacement Charging Port for Daily Phone Maintenance is a practical spare part designed to restore charging connection on compatible phones. It replaces damaged or worn USB-C/Lightning connectors and is intended for professional or careful DIY installation. Use case: when a device shows intermittent charging, loose connection, or visible port wear, replacing the port can return reliable power and data transfer without replacing the whole phone. Ideal for owners maintaining older devices or technicians performing routine repairs. Direct replacement: fits standard charging assemblies for common phone models. Material: metal contacts with polymer housing for consistent alignment. Compatibility: designed for phones using the listed connector type (verify model-specific fit). Inspection: each unit checked for physical defects before packing. Maintenance benefit: addresses contact wear to reduce charging interruptions. Light specifications: connector type varies by listing (USB-C or Lightning); dimensions approximate 8–12 mm width; color: silver/black contacts. Fit statement: verify model number and connector type before purchase to ensure correct fit. Professional installation recommended.

Read more less

This replacement adhesive is designed to secure the back housing of iPhone 14 models. It provides a pre-cut adhesive layer sized for the iPhone 14 back panel and intended for repairing separated or damaged rear covers. Use this adhesive when the back cover is loose after a drop or when replacing glass. It is suitable for at-home repairs or in a workshop environment for users comfortable with basic phone disassembly and standard tools. Precise fit: pre-cut to match iPhone 14 back-housing dimensions for a snug installation. Application: pressure-applied adhesive designed for straightforward placement with common tools. Compatibility: fits iPhone 14 series models (back housing repairs only). Function: restores contact between back glass and frame to limit movement and rattling. Inspection: supplied after visual quality checks to ensure consistent adhesion. Light specifications: single-piece adhesive layer; intended for rear glass-to-frame bonding on iPhone 14 models. Fit statement: designed to align with factory back-housing dimensions of iPhone 14; verify model before installation.

Read more less

Replacement vibrating motor for iPhone 14 Plus designed to restore vibration alerts for calls, messages and app notifications. The component is intended for daily use and integrates with the phone's existing hardware. Use case: suitable for users who rely on silent alerts during meetings, driving, or shared spaces and need a direct replacement to regain vibration feedback quickly when installed by a technician. Compatibility: specifically sized for iPhone 14 Plus internal mounting and connector layout. Material & color: metal and plastic housing in OEM-style finish to match internal components. Function: restores standard notification vibration patterns and intensity for normal daily settings. Installation: intended for repair by a trained technician or experienced DIYer with proper tools. Condition: inspected before shipment to confirm operational vibration output. Specifications: replacement linear resonant actuator size and connector matched to iPhone 14 Plus (exact dimensions per service guide). Fit: fits iPhone 14 Plus only; not compatible with other iPhone models.

Read more less

This replacement back camera lens is designed for the iPhone 14 to address scratches, cracks, or wear without replacing the whole device. Use cases: restore clear images for everyday photography, document scanning, and video calls; suitable for users who rely on the iPhone 14 camera for family photos or work tasks. Professional installation is recommended to avoid damage during fitting. Compatibility: Direct fit for iPhone 14 rear camera assembly. Function: Restores optical window to reduce glare and image blur caused by surface damage. Condition: Inspected prior to shipping to ensure the lens arrives free of visible defects. Design: Replacement part sized for the iPhone 14 camera module for a seamless fit. Maintenance: Allows targeted repair so other phone components remain intact. Specifications (light): replacement back camera lens for iPhone 14; single lens piece; sold individually. Fit: Intended specifically for iPhone 14 models; confirm model before purchase.

Read more less

The iPhone 14 Plus Power Button Cable is a direct replacement flex cable designed to restore the power button function on iPhone 14 Plus devices. Use case: replace a non-responsive or intermittent power button to regain reliable waking, locking, and shutdown control during calls, browsing, and daily use. Intended for installation by a trained technician or experienced repairer to reduce risk of damage. Direct compatibility: Fits iPhone 14 Plus models specifically; check model identifier before purchase. Function restored: Replaces damaged power/button flex for consistent button actuation. Compact form: Lightweight flex cable suitable for standard internal assembly. Pre-inspected: Each unit is checked before shipping for visible defects. Repair-kit friendly: Sized for common repair workflows and toolsets. Light specifications: flex cable assembly; connector type as used in iPhone 14 Plus internal layout. Fit statement: Designed to replace the original power button cable on iPhone 14 Plus; confirm compatibility with your device model before installation.

Read more less