This Emergency Strobe Light is a compact, 6-LED warning device for vehicles. It operates on DC 12–24V and uses up to 18W, providing a clear visibility signal for daily road safety needs. Designed for use on cars, motorcycles, pickups, trucks, and ships, it helps increase visibility during roadside incidents and hazards. 6 LEDs, 18W total output Voltage range: DC 12–24V Three-wire setup: black negative, red positive, yellow variable light Applicable to cars, motorcycles, pickups, trucks, and ships Suitable for daily road safety signaling Compact design with straightforward wiring for quick installation Light specifications: 6 LEDs, 18W, DC 12–24V input Fit: Compatible with 12–24V DC electrical systems across cars, motorcycles, pickups, trucks, and ships.

Read more less

This Car LED Headlight And Fog Light is designed for everyday driving with a simple, compact form and straightforward installation. With an aviation aluminum 6063 housing and a wide 9–32V operating range, it is suitable for most cars, trucks, and SUVs, providing a practical lighting upgrade without extra power draw. Use it to replace aging headlights or fog lights, improve visibility in rain or dusk, and add reliable illumination for daily driving. Light source: 3575 Chip Housing: Aviation Aluminum 6063 Voltage: 9–32V DC Color temperature: 6500K Brightness and power: 8000 LM per light, 26W per light Protection: IP68 waterproof and shock resistant Compatibility: Applicable to all vehicle models Fit: Compatible with most vehicles featuring a 9–32V electrical system; suitable for all models.

Read more less

Dual-Color Car Fog Lights are supplied as a 2-pack for night driving. The design is simple and installation is straightforward, with an aluminum housing for durability. Designed for night driving in fog and other low-visibility conditions, helping you see the road ahead more clearly without relying on high beams. Dual-color lighting modes provide flexible illumination for varying weather and road conditions. Aluminum housing aids heat dissipation and resists impact. Low power consumption reduces load on the vehicle electrical system. Shock-resistant construction stands up to bumps and vibrations. Long life with reduced heat generation supports reliable operation. Includes two lights for easy front-end installation. Specifications: Material — Aluminum. Package — 2 pieces. Fit: Designed for fog-light housings that accept standard automotive fog lights; verify compatibility with your mounting points.

Read more less

Car LED Headlights Waterproof For Reliable Night Driving offer bright, dependable illumination with 6000K cool-white COB LEDs and a durable aluminum body designed for long service life. Suitable for nighttime driving in low-visibility conditions, rain, or rural roads where consistent visibility matters and forward lighting is a priority. 50W per pair (25W per bulb); 5000 lm per pair (2500 lm per bulb). 6000K cool-white COB LEDs provide crisp, uniform illumination. IP68 waterproof rating with integrated aluminum heatsink; automatic short‑circuit protection. High-efficiency cooling with a silent fan (up to 12,000 rpm) to reduce heat buildup. Plug-and-play installation in about 10 minutes; no relay, capacitors, or extra wiring. Wide 9–36V input with constant-current control and anti-interference design; 200 m range. Fit: Compatible with most standard headlight housings and 9–36V vehicle electrical systems; straightforward plug-in replacement for many cars and light trucks.

Read more less

Dual Color Car Fog Light Kit offers two selectable colors for changing weather. It starts in 6000K white and switches to 3000K amber after a brief 3-second delay. In fog, rain, or haze, switch to amber for better contrast, or use white for everyday night driving. Two-color operation: 6000K white and 3000K amber; switch after startup. 30 x 2525-LED chips (24 sides, 6 top) deliver a fuller beam. 30W, DC 9-36V, ~3000 lumens; plug-and-play 1:1 replacement. IP65 waterproof, dustproof, cold- and shock-resistant for harsh weather. Aviation aluminum 6063 heat sink; long life over 30,000 hours. Specifications: Working voltage DC 9-36V; Power 30W; Luminous flux ~3000LM; Bead count 30 (24 side, 6 top); Color options white 6000K and amber 3000K; Housing aluminum 6063; IP65; Lifespan 30,000+ hours. Fit: 1:1 replacement for the factory fog lamp; suitable for most vehicles; plug-and-play installation.

Read more less

This dual-color fog light provides white and amber illumination to adapt to changing weather and road conditions. It starts with white light by default and lets you switch to amber with the control switch. In fog, rain, or haze, amber enhances contrast, while white offers longer-range visibility on clear nights. The system aims to improve situational awareness without adding complexity. Dual-color output: 6000K xenon white and 3000K amber; switchable via a simple control. High-brightness 12 CSP LEDs; up to 3000 lm with a wide, shadow-free beam. 1:1 fit and plug-and-play installation; designed to replace most factory fog lamps. Durable construction: IP65 waterproof, dust-, cold-, and shock-proof; aviation aluminum 6063 heatsink. Electrical specs: DC 9–32 V input, 30 W power, rated >50,000 hours service life. Specifications: Fog lamp location, 12 LED beads, white/amber color, 3000 lm, 30 W, IP65, 9–32 V DC, aluminum heat sink. Fit: 1:1 replacement for original fog lamps on most vehicles; plug-and-play with standard connectors.

Read more less

The 10 In 1 Truck Trailer LED Round Side Marker Lamp in red is a versatile 12V marker light designed for trailers, vans, caravans, and trucks. This compact unit combines multiple lighting functions in a single fixture to improve visibility from the front, sides, and rear. 10-in-1 design supports top, taillights, side markers, gaps, and turn signals. 312 LEDs deliver bright, even red illumination with a 6000K color temperature. IP67-rated housing offers waterproof, dustproof, and shockproof protection. 12V DC operation; white wire positive, black wire ground for simple wiring. Durable PP plastic body with a high-quality rubber sleeve for a secure seal. Universal compatibility with 12V trailer lighting systems for trailers, vans, caravans, trucks, and pickups. Specifications: LED count 312; color red; color temperature 6000K; voltage 12V; material PP plastic; protection IP67. Fit: Compatible with most 12V DC trailer lighting setups on a wide range of vehicles including trailers, vans, caravans, trucks, and pickups.

Read more less

The Car LED Front Fog Light provides reliable illumination for foggy or low-visibility driving. Designed for 12V–24V systems, it offers a practical upgrade for front fog lights or headlight lighting. Use-case: Ideal as a front fog light upgrade or replacement on many vehicle models to improve visibility in rain, fog, or snow without increasing energy consumption. Voltage: DC 12V–24V Power and brightness: 12W, approximately 1200 lm LED configuration: 66 LEDs with 2525 ceramic lamp beads, six-bead modules, constant current Color temperature: 6000–8000 K Material and durability: aluminum alloy housing; ~50,000 hours life Coverage: 360° illumination; suitable as front/rear fog light or headlight supplement Efficiency and reliability: energy-saving LED design with imported chips for stable performance Specifications: 12W power, 1200 lm, 66 LEDs, 6000–8000K, aluminum alloy body, 50,000 h life, 12–24V input, 360° beam Fit: Compatible with most 12V–24V vehicles; verify mounting compatibility with your specific model.

Read more less

The Car LED Fog Light With Wide Beam delivers clear, reliable illumination for low-visibility driving. It is designed for 12–24 V systems and uses energy-efficient LEDs. Use as a front fog light, auxiliary headlight, or rear fog light to improve visibility in fog, rain, or snow. Its 360-degree beam and rugged aluminum housing resist weather and road vibration. Voltage: 12–24 V DC input Power and brightness: 12 W, about 1,200 lm LED hardware: 66 LEDs; 2525 ceramic beads with constant-current drive Color and beam: 6,000–8,000 K; 360° beam angle Durability and efficiency: aluminum alloy housing; 50,000 h life; energy efficient vs halogen Specifications: aluminum alloy body; 66 LED units; 12–24 V operation; up to 50,000 h lifespan; 6,000–8,000 K color temperature. Fit: designed for 12–24 V vehicles and compatible with a wide range of car models. Check mounting points and electrical system compatibility for your specific vehicle.

Read more less

Compact Car LED Spotlight, 3-Inch, 20W white light, designed for off-road use. Use on trails, work sites, or as a rear light to enhance visibility without bulk. 4 x 10W CREE LED chips delivering 2000 lumens total. Die-cast CNC aluminum housing with IP67 waterproof, dustproof, and shockproof protection. Aviation aluminum shell for efficient heat dissipation; expected life over 50,000 hours. Included mounting hardware with adjustable angle up to 90 degrees; beam direction is easy to refine after install. Wide vehicle compatibility: motorcycles, jeeps, 4x4s, trucks, tractors, trailers, golf carts, pickups, cars, SUVs, ATVs, boats. Versatile use cases beyond driving lights, such as garden or architectural accent lighting. Light specifications: 6000K color temperature, 20W, 2000 lumens, DC 9–80V input, 3-inch housing, effective range up to 200 meters. Fit: Suitable for standard 3-inch mounting patterns on a wide range of off-road vehicles and trailers.

Read more less

Strobe Car Fog Light Kit For Everyday Night Driving offers a practical solution for low-visibility conditions. It pairs standard fog lighting with a configurable strobe feature to help you see and be seen on dark roads. Designed for foggy mornings, rain-soaked commutes, and rural night drives, this kit improves peripheral illumination without overwhelming oncoming traffic. Strobe-capable fog lights with multiple flash patterns for visibility on dark roads Compatible with typical 12V automotive electrical systems Compact design that fits most bumpers or grilles Simple installation with standard mounting points and connectors Durable housing designed to withstand weather exposure Light specifications (varies by configuration): Size, color, and brightness depend on the chosen setup. Fits a wide range of vehicles with standard bumper cutouts or grille mounting. Check your bumper depth and mounting options before installation.

Read more less

A pair of 12V 7W LED fog lights for cars, designed for everyday driving. They provide compact, straightforward illumination to supplement your vehicle's headlights. Used in foggy or low-visibility conditions, these lights illuminate the road edge and guardrail, helping the driver judge distance and lane position at lower speeds. LED technology delivers efficient light with low power draw 12V DC operation compatible with most car electrical systems 7W per light for bright, focused output Sold as a pair for dual-front fog lighting Integrated strobe mode for signaling and attention Compact form factor fits into tight mounting spaces Specifications: 12V DC input, 7W per light, LED array. Fit: suitable for 12V vehicles with compatible fog light housings and mounting points.

Read more less

Strobe Car LED Fog Light Pair is a practical lighting upgrade for everyday driving. These LED fog lights are designed to improve visibility in poor weather and low-light conditions. Use them in fog, heavy rain, or early morning commutes to enhance forward visibility and reduce glare. They provide a steady, reliable beam to help you navigate tougher road conditions. Easy plug-and-play installation with standard wiring; no specialty tools needed. LED elements provide a bright, evenly dispersed fog beam with reduced glare. Weather-resistant housing and sealed connectors for year-round use. Low power consumption and long service life for daily driving. Compatible with common 12V automotive electrical systems. Includes two fog lights for symmetrical illumination. Light specifications can vary by model; expect consistent brightness and dependable performance over time. Fit: Compatible with vehicles that have standard fog-light mounting points. Please verify mounting and electrical compatibility for your make and model.

Read more less

This 4 In 1 Car Grille LED Lights kit provides compact, grille-mounted illumination for 12V vehicles. Connect to standard vehicle wiring and use the remote to switch between lighting modes for four LED clusters. Four 3-LED clusters driven by a single host for even grille lighting. LED color temperature: 6500K (cool white) for bright, clear visibility. Wireless remote control to change modes without wiring changes. ABS housing with compact dimensions: 7 x 1.5 x 3 cm. Electrical specs: input power 16W, LED output 24W, voltage 12V DC, current 0.1A. Long service life: over 100,000 hours. Simple wiring connection designed for 12V automotive systems. Material: ABS. Size: 7x1.5x3 cm. Color temperature: 6500K. Voltage: DC 12V. Current: 0.1A. Light source: LED. Light source power: 24W. Lifespan: >100,000 hours. Fit: Designed for 12V automotive systems; its compact footprint fits a wide range of grille openings.

Read more less

Car Grille LED Warning Lights 4in1 With Wireless Remote provide multi-mode signaling for 12V vehicles. Constructed from PS+ABS, this compact unit mounts directly to the grille with a simple stick-on installation. Brand: None. Use these lights to improve daytime visibility on city streets, for roadside assistance signals, or to alert others when parked or working roadside. Material: PS+ABS Voltage: DC 12V Current: 1.6A Power: 16W Service life: 50,000–100,000 hours Remote control: Wireless with multiple modes; supports wired remote control Light specs: 4in1 design supports multiple signaling patterns; operates on 12V DC, 16W, 1.6A. Fit: Designed for 12V vehicle electrical systems; sticks to the grille for easy installation and works with cars, trucks, and SUVs that use grille-mounted lights.

Read more less

This high-position brake light is a rear red lamp designed for Jeep Renegade models from 2015 to 2020. It emphasizes straightforward installation and reliable visibility. Ideal for replacing a damaged brake light or upgrading aged lighting to maintain rear visibility in low light and adverse weather. Simple design and easy installation Low power consumption for energy efficiency Bright illumination with consistent red color Durable ABS material offers impact resistance Dimensions: 39.2 x 8.5 x 2.8 cm Color: Red; fits Jeep Renegade 2015–2020 (rear high-position brake light) Specifications: Material: ABS. Color: Red. Dimensions: 39.2 x 8.5 x 2.8 cm. Optional light specifications: Designed to fit standard automotive electrical systems and match mounting points on the Jeep Renegade rear assembly. Fit: Jeep Renegade 2015–2020 (rear high-position brake light).

Read more less

The Honda CR-V High Position Brake Light Replacement LED provides a straightforward, non-destructive way to refresh the vehicle’s top brake light. It uses a sealed design and snap-fit installation for a secure fit. Ideal for replacements when the factory light is dim or non-functional. This LED unit is designed for 2012–2016 CR-V models and supports easy, tool-free installation. Material: ABS housing with a sealed design to resist water intrusion Installation: snap-fit, no drilling or modifications required Lighting: bright LED lamp beads for clear brake signaling Electrical specs: 12V, 1A current, 5W power draw Compatibility: fits Honda CR-V 2012–2016; OE references 34270TFCH01, 34270T0AH01, 34270-T0A-H01 Finish: exterior lens and housing designed for a factory look Light specifications: LED type provides steady illumination with low power consumption. Sealed design helps prevent water short circuits in exposed driving conditions. Fit: Honda CR-V high-position brake light, 2012–2016, OE-style replacement.

Read more less

High Position LED Brake Light provides enhanced rear visibility with a slim, weatherproof housing. Its straightforward design makes installation quick on compatible vehicles. It is designed for Audi A4/A4L (B8) models from 2009–2016. This replacement unit is suitable when upgrading a dim or aging brake light, offering clearer signaling in daylight and at night to drivers behind you. LED beads deliver bright, distinct brake illumination for faster recognition Simple, tool-free installation with a standard 12V electrical system Durable PC+ABS housing withstands daily road exposure and weather Size: 35.5 cm (L) x 12.5 cm (W) x 3.5 cm (D) Electrical specs: 12V, 3.5A current, 55W power Compatible with Audi A4/A4L (B8) 2009–2016 Light specifications: LED technology provides reliable braking signal with low power draw and long life; operates at 12V. Fit: Audi A4/A4L (B8) 2009–2016. Please verify compatibility with your vehicle’s rear lamp housing before purchase.

Read more less

The Volkswagen Transporter LED Brake Light is designed for high-position mounting on VW T5 and T6 vans. It provides a compact, easy-to-install replacement that enhances rear visibility. Ideal for replacing worn brake lights or upgrading to a brighter, more reliable signal in urban traffic and on the highway. Simple design enables straightforward installation Low power use: 3W at 12V, 200 mA Bright LED beads for clear brake indication Durable PC+ABS housing for daily vehicle use Compact size: 18.7 x 3.5 x 4.7 cm OE-compatible with 7E0945097E / 7E0945097F Specifications: Size 18.7 x 3.5 x 4.7 cm; Material PC+ABS; Current 200 mA; Voltage 12 V; Power 3 W. Fit: Designed for VW Transporter T5 and T6 models; OE numbers 7E0945097E, 7E0945097F.

Read more less

The Mini Cooper LED High Position Brake Light provides a dedicated high-mounted brake signal for Mini Cooper R50/R53 models (2002–2006). The lightweight unit uses PC housing with integrated LEDs to deliver a clear, bright brake indication. Designed for straightforward installation, it plugs into the vehicle's 12V system and requires minimal tools. The result is a compact upgrade that enhances visibility in the rear. Material: PC+LED Dimensions: 36 x 6 x 4 cm Electrical: 12V, 3.5A, 55W Power: Low power consumption, energy saving Compatibility: Fits Mini Cooper R50/R53 2002–2006 Installation: Simple design and easy installation Light details: Bright LED beads operate at 12V, drawing about 3.5A for a 55W load. Fit: Designed to fit Mini Cooper R50/R53 models from 2002 to 2006 with a standard 12V system.

Read more less

The High Position Brake Light is a direct replacement designed for the Volkswagen Caddy models from 2004 to 2015. It uses a PC+ABS housing for durability and a 12V electrical system compatibility. Designed to replace worn or damaged rear brake lights, it enhances braking visibility for drivers behind you in urban traffic and on highways. The integrated LEDs provide a bright signal when you apply the brakes. Material: PC+ABS housing for impact resistance and long-term durability Light source: bright LED beads for quick recognition and improved safety Voltage: 12V DC to match standard vehicle electrical systems Power: 55W energy use (specification as provided) Design: simple, plug-and-play installation with minimal tools Compatibility: fits Volkswagen Caddy model years 2004–2015 Optional light specifications: LED technology supports fast response and low energy draw; designed for standard automotive mounting and electrical connections. Fit and installation: compatible with Caddy 2004–2015, with mounting points matching the original brake light assembly. Proper alignment ensures full signal coverage.

Read more less

A practical upgrade for the VW Multivan Caravelle T5/T6, this High Position LED Brake Light blends simple design with reliable performance. It is designed for easy installation and consistent operation. Use it to replace worn brake lights or refresh rear signaling, helping other drivers recognize braking sooner in urban traffic and on the highway. Material: PC+ABS housing for durable, weather-resistant use Voltage: 12V with 1A current, 4W power Bright LED beads provide clear braking signals Low power consumption supports the vehicle electrical system Easy installation with standard mounting points Compatible with VW Multivan Caravelle T5/T6 (2003–2010) Specifications: Material PC+ABS; Voltage 12V; Current 1A; Power 4W. Fit: Designed to mount in the high-position brake light location on the VW Multivan Caravelle T5/T6, model years 2003–2010.

Read more less

This high-position brake light is designed for the VW Golf 5 GTI MK5 (2005–2009). It features a simple design and easy installation for replacement or upgrade. Use it to restore rear signaling on aging brake lights or to improve daytime visibility for drivers behind. Fits VW Golf 5 GTI MK5 2005–2009 high-position brake light Material: PC housing with integrated LEDs; weather-resistant Voltage: 12V; current draw approximately 1A Low power consumption and energy efficient Bright LED beads enhance brake indication and rear visibility Simple, plug-and-play installation; no wiring modifications required Specifications: Material: PC housing with integrated LEDs. Voltage: 12V. Current draw: ~1A. Fit: Direct replacement for the Golf 5 GTI MK5 high-position brake light (2005–2009); verify connector compatibility and mounting before installation.

Read more less

The Audi TT LED High Position Brake Light adds a dedicated rear brake signal for night driving. With a simple design and straightforward installation, it serves as a practical, non-intrusive upgrade that enhances conspicuity without altering existing controls. Designed for the Audi TT MK2 (8J) 2006–2014, this light sits high on the rear and provides a distinct brake indication during low-light conditions. It is compatible with standard 12-volt electrical systems and requires minimal wiring changes for installation. Material: ABS+LED Voltage: 12V; Current: 0.2A; Power: 3W Simple design and easy installation Bright LED beads for clear signaling Energy-efficient, low power consumption Compatible with Audi TT MK2 8J 2006–2014 Specifications: Material ABS+LED; Voltage 12V; Current 0.2A; Power 3W. Fit: Audi TT MK2 8J 2006–2014.

Read more less