Car Lighting

The T10 Car Clearance Light with Decoder offers a compact, reliable lighting option for everyday vehicle use. Its 27x10x6 mm profile fits in tight clearance housings and reduces bulk during installation. Ideal for replacing worn clearance lights on cars, trucks, or SUVs where steady illumination is needed in day and night driving. Size: 27x10x6 mm fits compact clearance housings. Decoder included to ensure compatibility with CAN-bus and modern vehicle wiring. Low power consumption reduces load on the electrical system and helps heat management. Lower heat generation contributes to longer LED life in varying climates. Shock-resistant construction withstands road vibrations and impacts. Brighter, consistent illumination for clear signaling in daytime and night. Specifications: Size 27x10x6 mm; socket: standard T10 wedge base. Fit: Designed to fit standard T10 clearance light sockets in most passenger vehicles.

Read more less

This 10-pack of Car Clearance Light T10 W5W LEDs provides practical illumination for vehicle clearance and side-marker lighting. Use these bulbs to replace aging clearance lamps on cars, trucks, and SUVs, or to refresh marker lighting in bumper areas. 10-pack set for multiple locations on a single vehicle Base: T10 wedge design; simple, tool-free installation Compact size: 25x9 mm to fit tight spaces Low heat generation with energy-efficient operation Shock-resistant construction for reliable performance in vibration Bright LED output suitable for clearance and marker lights Specifications: Size 25x9 mm; LED type W5W; 10 bulbs in the pack. Fit: Compatible with vehicles using T10/W5W wedge sockets.

Read more less

This Ford LED Dynamic Turn Signal Light 2-Pack is designed to replace original indicators on select Ford models. The kit provides durable, weather-ready LED signaling for daily driving. Use these lights to upgrade visibility and signaling without altering your vehicle’s exterior lines. Material: ABS housing and lens for durable, weather-resistant use Lighting: Dynamic LED turn signals with sequential illumination Durability: Resistant to high and low temperatures and general wear Waterproof: Constructed to withstand outdoor exposure for longer life Compatibility: Ford Focus Mk2 (02/2008–12/2010), Focus Mk3 (12/2010–04/2018), Mondeo Mk4 (12/2010–08/2014) Installation: Easy to install with existing mounting points Light specifications: LED dynamic signals, included in a 2-pack, housed in ABS construction. Fit: Direct replacement for the listed Ford models, designed for straightforward swap-in.

Read more less

The Car Clearance LED Light 2-Pack offers compact, exterior-grade illumination for vehicle clearance zones. It emphasizes easy installation and reliable operation without bulky fixtures. Ideal for bumpers, undercarriage clearance, and cargo-area entrances, these lights improve edge visibility in low-light conditions and help prevent accidental scrapes. Size: 30 x 10 x 10 mm per light; 2-pack included. Simple installation with minimal tools and straightforward mounting options. Low power consumption helps reduce electrical draw and energy use. Low heat output and rugged construction provide durability in outdoor use. Bright exterior illumination enhances edge visibility for safer docking and parking. Specifications: Size per light 30 x 10 x 10 mm; pack includes two lights. Fit: Suitable for exterior vehicle applications where compact clearance lighting is needed. Check available mounting space before installation.

Read more less

The Vehicle Front Grille Emergency Strobe Light 4 In 1 combines a durable aluminum housing with bright LEDs to provide clear signaling for a range of vehicles. Designed for front grille mounting on cars, motorcycles, pickups, ships and trucks, it helps alert other road users during emergencies, roadside work, or weather-related stops. 12 LEDs with 18 W output for visible signaling in daytime or low light Aluminum housing with an integrated circuit board and LED beads for durability DC 12–24 V operation via a simple 2-wire socket 16 selectable strobe modes to cover different signaling needs Compatibility with cars, motorcycles, pickups, ships and trucks Front-grille mounting design for straightforward installation Optional light specifications: 12–24 V DC input; 18 W power draw. Fit: suitable for vehicles with 12–24 V electrical systems and front-grille mounting.

Read more less

This 1 Pair Tail Lamp Holder provides a practical replacement for Honda Odyssey tail lamp assemblies using H1 bulbs. Made from durable plastic, it helps create a stable mounting when upgrading to LED or aftermarket bulbs. If your LED replacement sits unevenly in the stock housing, this adapter can help secure it in place and reduce movement while driving. Please check the bulbs model before purchasing. Includes 1 pair of lamp holders Material: Plastic Fits Honda Odyssey tail lamp assemblies that use H1 bulbs Helps secure LED or aftermarket bulbs to prevent wobble Designed for use with H1 bulb installations in the tail light housing Specifications - Material: Plastic. Includes 1 pair. Compatibility: Honda Odyssey tail lamp assemblies with H1 bulbs. Fit - Honda Odyssey tail lamp assemblies that require H1 bulb installations. Please verify your bulb model before purchasing.

Read more less

This Hyundai Elantra tail lamp holder is an adapter designed to support H7 bulb installations in the rear lighting. It helps secure the bulb and align it properly within the tail lamp housing. When upgrading from stock bulbs to LED options, the adapter helps maintain bulb position and reduce movement that can affect lighting performance or visibility. H7 bulb compatibility for Hyundai Elantra tail lamp housing Stabilizes LED or other bulb replacements to prevent wobble and misalignment Durable plastic construction designed for automotive use Easy installation using existing mounting points in compatible Elantra models Verify bulb model before purchase to ensure correct fit Light specifications: Material: Plastic. Adapter supports H7 bulbs. Fit: Compatible with Hyundai Elantra tail lamp assemblies that use H7 bulb sockets.

Read more less

This 2-pack LED Turn Signal Light Decoder With Dual Resistance provides a practical solution for upgrading to LED bulbs on 12V vehicles. It helps LED signals illuminate reliably without flicker or warning errors. Designed for plug-and-play installation, these decoders require no wiring modifications. They can be used with turn signals and brake lights in 12V systems to improve stability when using LED bulbs. Includes two decoders for a complete upgrade Operates with 12V DC vehicle electrical systems Rated up to 50 W per unit Dual 6-ohm resistance to simulate traditional bulb loads Reduces flicker and minimizes common LED warning errors Plug-and-play installation; no bulb modifications needed Compact, discreet modules that fit behind lighting housings Specifications: Power 50 W, Resistance 6 Ω, Voltage DC 12 V. Fit: Works with 12V automotive lighting systems using LED turn signals and brake lights; install behind the lighting housing with existing wiring.

Read more less

Upgrade your brake signaling with the 2-Pack LED Car Brake Lights for Everyday Driving Use. The design emphasizes simplicity and easy installation, allowing you to refresh your brake lights without complex wiring. These lights are suitable for daily drivers seeking improved visibility during braking in city traffic and highway conditions. They provide reliable illumination when you press the brake, helping other drivers notice your vehicle. Simple design for quick installation Aluminum housing for heat dissipation and durability LED technology with low power consumption Bright output with clear braking signal Shock-resistant construction for daily use Low operating temperature for stable performance Includes 2-pack set Light specifications: Material: Aluminum. Fit: Designed for standard automotive brake light housings.

Read more less

Red Square Car Brake and Reversing Light for Day and Night provides a compact, square red light for 12V vehicles. Its simple design supports easy installation and reliable signaling. Use it at the rear of your vehicle to indicate braking or reversing in daytime or nighttime driving, helping other road users see your intentions. Power: 1W; Voltage: DC12V; energy efficient Material: ABS housing with red lens; rugged and impact resistant Size and cable: 9.5 x 6 x 3 cm; 1.4 m cable length Easy installation: straightforward mounting and wiring Bright illumination: visible in day or night, with low temperature operation Compatibility: designed for 12V automotive electrical systems Specifications: Power 1W, Voltage DC12V, Material ABS, Size 9.5x6x3 cm, Cable length 1.4 m, Color: Red. Fit: Designed for 12V systems with standard mounting space; dimensions help ensure clearance on many rear surfaces.

Read more less

Compact Car Triangle LED Light for Brake and Reversing Use. This compact signal light is designed for 12V vehicles to indicate braking and rearward movement with a bright LED. Use-case: When signaling a stop or backing up, install on the rear of your vehicle to improve visibility in low light and at roadside stops. It provides an obvious indication without relying on traditional bulbs. Power: 1W with DC12V operation for efficient signaling Material: ABS housing with impact resistance for everyday use Illumination: bright LED for clear brake or reverse indication Installation: simple, plug-and-play wiring with insulated connectors Size & Cable: 8 x 10.5 x 2 cm; 1.4 m cable length Compatibility: designed for 12V vehicle electrical systems Specifications: Power 1W; Voltage DC12V; Material ABS; Size 8x10.5x2 cm; Cable length 1.4 m. Fit: Suitable for most passenger cars, SUVs, and light trucks with 12V systems.

Read more less

This H16 bulb holder base female socket with cable is a practical adapter for LED bulb upgrades, designed to provide reliable electrical contact in general-use fixtures. Sold as a 2-pack, it offers a secure connection without modifying the fixture. When replacing the original bulb with an LED, this lampholder adapter helps the new bulb seat firmly and stay in place in fixtures that use H16 sockets. Material: Plastic Compatibility: General models; fits H16 base female sockets Design: Lampholder adapter to secure LED bulbs Pack size: 2 pieces Weight: 22 g per unit Installation: Plug-and-play; requires no tools Durability: Designed for long service life Optional light specifications: Weight 22 g per unit; Material: Plastic. Fit: Compatible with standard H16 base female sockets across automotive and fixture installations.

Read more less

Two-pack dual-color LED turn signals designed for cars and motorcycles. Each unit uses a silicone housing and SMD-3014 LEDs to deliver visible signaling with low power draw and a durable design. Ideal for upgrading OEM indicators on 12V vehicles, these signals provide a white constant light for visibility and a red flashing signal to indicate turns. 2-pack set for cars or motorcycles 12V DC operation; 1.1W per light SMD-3014, 42 LEDs per unit; silicone housing White constant light + red flashing signal Easy installation; plug-and-play with standard 12V systems Low heat generation, high shock resistance, long life Specifications: Voltage 12V, Power 1.1W, 42 LEDs per unit, SMD-3014, Silicone construction, dual-color white/ red. Fit and compatibility: Designed for standard 12V vehicle signaling circuits. Verify mounting size and connector compatibility with your vehicle model before installation.

Read more less

8-Pin LED Turn Signal Flasher for Toyota and Lexus, 12V adjustable frequency. This compact module replaces the stock relay for LED indicators. Use it to replace a failing relay or to update your turn signals. The adjustable speed lets you tailor flash rate to your LED setup for consistent operation in daily driving. 8-pin plug and 12V operation for compatible Toyota/Lexus flasher sockets Adjustable flashing frequency: 55–190 times per minute Flame-retardant housing with conductive plug for safety and reliable contact Simple plug-and-play installation: disconnect the original relay and install this unit Compact size: 40 x 30 x 27 mm; weight 30 g Suitable for standard 12V automotive electrical systems and LED turn signals Light specifications: Rated voltage 12V. 8-pin socket compatibility. Physical size 40 x 30 x 27 mm. Weight 30 g. Fit: 8-pin relay socket used in Toyota and Lexus models that rely on a standard 12V flasher relay.

Read more less

Four blue T10 clearance lights designed for universal vehicle use. They offer a practical, straightforward exterior lighting solution. Ideal for car, truck, SUV, or trailer applications where nighttime visibility matters. Use as rear, side, or bumper markers to help signal your vehicle’s presence. Color: Light blue Size: 43 x 11 x 11 mm Weight: ~18 g per light Base: T10 wedge base for broad compatibility Power & heat: Low power consumption; minimal heat generation Durability: Shock-resistant; operates in low temperatures Installation: Simple design; easy to install Specifications (per light): Blue color, T10 wedge base, 43 × 11 × 11 mm, approx. 18 g weight. For all vehicles with compatible T10 sockets. Fit: Suitable for most vehicles with T10 clearance light sockets. Verify compatibility with your fixture before installation.

Read more less

This 2-pack T10 car clearance light set provides practical lighting for common vehicle applications. The compact design supports straightforward, tool-free installation. Size: 40 x 11 x 11 mm Weight: 8 g Low power consumption with reduced heat generation Shock-resistant construction and brighter illumination Easy installation with a simple plug-and-play approach Compatible with standard T10 sockets used in clearance lighting The two-pack provides matched lighting for multiple locations on a vehicle, such as rear clearance markers, side markers, or the cargo area. Fit: Designed for standard T10 sockets commonly used in vehicle clearance lighting.

Read more less

This 1 Pair H1 LED Fog Light is designed for 12V automotive systems and offers a compact, straightforward installation. Its practical design supports quick setup without tools and steady performance in variable weather conditions. Ideal for nighttime visibility in fog, rain, or mist, it helps reveal road edges and indicators more clearly. The white LED output provides consistent brightness for safer driving in challenging conditions. Simple plug-and-play installation with standard H1 sockets, reducing setup time. Low heat generation and long service life, maintaining performance across seasons. Low power consumption at 5W in a 12V system, helping conserve vehicle power. Shock-resistant housing with sealed construction that resists dust, moisture, and vibrations. White LED illumination with stable color temperature for clear visibility of road signs and lane markers. Specifications: Voltage: DC12V; Power: 5W; Color: White; Socket: H1; Package: 1 pair. Fit: Suitable for vehicles with H1 fog light sockets and 12V electrical systems.

Read more less

1. Simple design, easy installation. 2. Major reduction heat generation, long life. 3. Low power consumption, saving energy and environment protection. 4. High ability of shock resistant, brighter light, low temperature. 5. Specification: Voltage: DC12V Power: 5W

Read more less

H11 Bulb Holder Base Socket With Cable for BMW Vehicle. This plastic lampholder adapter is designed to secure an H11 bulb in BMW headlights when upgrading from halogen to LED lighting. Use-case: It helps ensure a snug fit and reliable electrical connection, so LED bulbs stay aligned and powered without vibration in daily driving. Base type and compatibility: H11 bulb base; fits BMW headlight assemblies that use H11 sockets. Material and construction: durable plastic lampholder designed for automotive use. Cable and wiring: integrated cable connects to the vehicle harness for plug-and-play installation. Installation: simple, tool-free fit with existing wiring and mounting points. Durability: designed for regular vehicle temperatures and vibration with a long service life. Specifications: Weight 22 g; Material: plastic; Cable: integrated for direct connection to BMW harness. Fit: Compatible with BMW headlights that use H11 sockets and LED-compatible lampholders; ensures secure seating and electrical contact.

Read more less

The 7-Inch Matrix Gradient LED Headlights for Jeep Wrangler provide a versatile, all-in-one lighting upgrade with a matrix gradient design and dynamic DRL/turn signals. Designed for night driving, trail use, and variable weather, these headlights deliver a bright white driving light and amber turn indicators that signal intent smoothly. Matrix gradient DRL with five-function operation: driving light, high beam, low beam, and left/right amber turn signals. Plug-and-play installation with included H4-H13 adapter; connects to factory wiring. 6000K white driving light; amber turn signals; optional 3000K warm white. Die-cast aluminum housing and polycarbonate lens; IP67 rating; rust- and shock-proof. 300W power, up to 30,000 lumens; 9–30V input; automotive-grade design. Long life up to 50,000 hours; operating temperature -40 to 85°C. Specs: LED chip: CREE; Size: 7 inches; Color temperature: 6000K/3000K; Life: 50,000 hours. Fit: 7-inch headlights designed to fit Jeep Wrangler factory or aftermarket 7-inch housings; plug-and-play with common 4x4 headlight setups.

Read more less

Three-LED Car Side Marker Lights (3/4 inch) provide compact, weather-resistant lighting for cars, trucks, and trailers. Each unit houses three LEDs in a rubber and PC enclosure, designed for a 10–30V electrical system and broad compatibility across 12V and 24V networks. Use them to add side visibility, clearance lighting, or trailer identification in everyday driving. The two-wire harness includes a lead and a ground wire for straightforward mounting on various surfaces. Three LEDs per light for clear visibility. Two-wire harness with lead and ground for simple mounting. Voltage range 10–30V for broad compatibility. Cable length 22 cm for flexible routing. IP68 waterproof; rubber + PC housing for durability. Specifications Diameter: 0.75 in (19 mm). Cable length: 22 cm. Material: rubber + PC. IP68 rating. Pack: 10 lights. Fit Designed for 10–30V systems and works with most cars, trucks, and trailers. Verify mounting space and wiring routing before installation.

Read more less

This 4-pack Truck Side Clearance Marker Light provides reliable side visibility for trucks, trailers, and other 12–24V vehicles. Each light uses durable LEDs with low power draw for steady performance. Ideal for replacing worn side markers on the vehicle’s edge—along doors, frames, or trailers—helping other road users see your vehicle in low light or bad weather. Includes 4 lights for full side coverage 12 LEDs per unit for clear, consistent marker illumination Voltage range: DC 12–24V, compatible with common truck/equipment electrical systems Direct bolt installation with anti-vibration design for secure mounting Low power consumption and cool-running LEDs Installation hole spacing about 10 cm Light specifications: 12 LEDs per light; DC 12–24V operation; mounting hole spacing ~10 cm. Fit and use: Suitable for trucks, trailers, vans, and other 12–24V vehicles requiring side clearance lighting.

Read more less

Three-color rear light for daily use on trucks, trailers, and utility vehicles. It features a PC+ABS housing and screw-in mounting for easy installation. Provides brake, running, turn, and reversing signals in a single unit. Durable PC+ABS housing with screw-in mounting for easy installation. LED configuration: 84 red 2835 LEDs, 30 yellow 2835 LEDs, 33 white 2835 LEDs. Brightness and color: 500 lm brightness, 3000K color temperature. Electrical: DC12-30V compatibility; current draws—12V: brake 0.86A, running 0.23A, turn 0.32A, reverse 0.26A; 24V: brake 0.48A, running 0.14A, turn 0.20A, strobe 0.16A. Long service life: up to 30,000 hours. Broad compatibility: suitable for cars, trucks, trailers, RVs, tent cars, and engineering vehicles. Light specs: 3W, 500 lm, 3000K, DC12-30V operation. Fit: Compatible with standard 12V/24V vehicle electrical systems for trucks, trailers, RVs, and similar vehicles.

Read more less

The MK-190 Truck LED Side Marker Lights (2-pack) deliver a dependable white marker light for trucks and similar vehicles. Ideal for adding side visibility on trucks, trailers, or cab extensions in daytime and night driving. 28 LEDs deliver bright, consistent white light Rubber+PC housing resists vibration, moisture, and debris Diameter 11 cm; thickness 1.5 cm for a compact fit DC 12–24 V input; 1–3 W power draw Long service life: 50,000+ hours IP67 waterproof and dustproof for harsh conditions Easy plug-and-play installation with no wiring mods Materials and dimensions: housing combines rubber and PC for impact resistance and flexibility. Each marker measures 11 cm across and 1.5 cm thick, containing 28 LEDs wired for 12–24 V operation. Electrical specs: Typical power draw is 1–3 watts, with a service life of over 50,000 hours, and IP67 protection. Fit: Designed to fit common side-marker openings on many trucks and trailers with 12–24 V systems.

Read more less