Car Lighting

70mm White Angel Eyes LED Headlight Ring for Vehicles adds a clean white halo around your headlights. Designed for 70 mm diameter headlamp openings, it delivers a bright, even outline when active. Use this halo ring to upgrade the front of your vehicle or replace worn halos during maintenance. It provides a defined ring that improves nighttime visibility of the headlight area. 70 mm diameter fits standard 70 mm headlight housings White LED halo ring creates a crisp, visible outline High brightness with low power consumption Shockproof and heat resistant for durable use Long-lasting LED tubes for extended service life Eco-friendly design with durable materials Specifications: Color: White; LED type: halo ring; Diameter: 70 mm. Fit: Designed for 70 mm headlight openings; verify compatibility with your vehicle's headlight housing before installation.

Read more less

60mm Blue Angel Eyes LED Headlight Circles offer a practical halo upgrade for many vehicles. The blue rings fit standard 60 mm housings and add a distinct accent to your headlights. They are suitable for upgrading aftermarket headlights, restoring worn halos, or adding a visual touch to daytime driving without altering core lighting performance. They fit most 60 mm headlight housings and are intended for standard automotive electrical systems. 60 mm diameter blue LED rings for vehicles High brightness with low power consumption Easy installation; shockproof and heat resistant Long-lasting light tubes with durable construction Environmentally conscious design; built to endure typical driving conditions Specifications Diameter: 60 mm; Color: Blue; Type: LED halo rings. Fit: Designed to fit 60 mm halo housings common on many headlight assemblies. Please check your model's compatibility before ordering.

Read more less

Angel Eyes 90mm COB LED Car Headlights offer a compact, high-visibility upgrade for vehicles with 90mm headlight housings. Built with a COB LED array, they provide a bright, uniform beam while keeping power draw lower than traditional halogen bulbs. Ideal for replacing worn bulbs or upgrading stock lighting on daily drivers, weekend cruisers, and work vehicles. They are designed for straightforward installation in compatible headlight assemblies and do not rely on exterior ballast when used in appropriate setups. 90mm diameter COB LED module for standard 90mm headlight housings Low power consumption compared with halogen equivalents Shockproof and heat-resistant construction Long service life with durable components Eco-friendly design featuring energy-efficient LEDs Easy, tool-free installation in compatible vehicles Light specifications: COB LED module, 90 mm diameter; designed for automotive use in 90 mm headlight openings. Fit: designed to fit 90 mm headlight openings in compatible vehicles; check your model and installation requirements.

Read more less

The Safety Traffic Red LED Baton is a handheld signaling tool designed to mark danger zones and guide traffic in low-light conditions. Ideal for roadside crews, event staff, and emergency responders, it helps designate stopping points and alert others with a steady or flashing signal. Built-in LED lamp with low power consumption and bright output; blink rate ~2 times per second Magnetic tail for quick mounting on metal surfaces Visible up to 200 meters in darkness Flashing mode for emergencies or signaling Length 53.5 cm; powered by 2 x R20 batteries Water-resistant construction Light specs: red LED with steady and flashing modes; uses 2 x R20 batteries for power. Fit: Suitable for traffic controllers, road crews, and event staff who need a portable, magnet-mountable signaling device.

Read more less

The Solar Retractable Traffic Cone is a portable, solar-powered delineator for roadside work zones. Use it to mark temporary lanes, warn drivers, and guide traffic at jobsites or detours. The retractable design simplifies storage when not in use. 56 cm height with ABS base and PVC fabric for durability Monocrystalline solar panel and charging time 6–8 hours Two AAA rechargeable batteries for operation Three red LEDs (Ø5 mm) with high-brightness output and 110 bpm flashing Viewing distance up to 500 meters in dark conditions IP54 weather resistance; operates from −40 to 70°C Retractable design for compact storage and quick setup on roads or sites Light and runtime: Lighting duration on rainy days is about 10 days with 12 hours of daily use. Fit: Size: 56 cm tall; retractable cone folds for easy transport and deployment.

Read more less

Solar Shark Fin Alarm Light for Cars High-Positioned is a wire-free safety beacon designed for roof mounting. It runs on a built-in lithium battery and solar panel, eliminating wiring on most vehicles. Ideal for urban, highway, and nighttime driving. Mounted on the roof, it provides visible warning signals for parked and moving vehicles. Adhesive peel-and-stick mounting on the roof—no wiring. Solar-powered with internal lithium battery; automatic charging. 3 hours sun yields 3–5 days of operation; 15 hours sun yields 15–20 days. High-brightness 15x15 mm LED emits strong, steady warning light. Auto sensing: light and vibration sensors; night operation; 120-second auto-off when parked. Color options match vehicle finishes; baked enamel finish provides corrosion resistance. Fit: suitable for most car roofs with peel-and-stick installation.

Read more less

Amber T5 Instrument Light for Honda Accord instrument clusters provides a direct, plug‑and‑play replacement for the meter lamp. It runs on 12V and uses a T5 base to fit common dashboard assemblies. Use it to improve nighttime readability, replace a dim OEM lamp, or refresh the look of your dashboard without tools beyond what's required for typical instrument panel access. Base: T5 wedge base for plug‑and‑play fit Voltage and power: 12V DC; 1.2W consumption Brightness: 3400 lm output for clear meter reading Color: Amber illumination to reduce glare and shadows Compatibility: Specifically designed for Honda Accord instrument clusters with T5 interface Installation: Suitable for replacing stock meter lamps; check access in your model year Specifications: 12V DC, 1.2W, 3400 lm, Amber, T5 interface. Fit: Designed for Honda Accord instrument clusters using a T5 lamp base; confirm your vehicle's year and model before installation.

Read more less

discoveredwa presents the H4 Dual Beam LED Fog Light in pure white, a panel-style LED unit designed for automotive use. Use it in conditions with reduced visibility—fog, rain, or dusk—where a broad, horizontal beam improves roadside awareness. It supports standard 12V automotive systems and can function as a fog light or a driving light. 12V DC operation; not dimmable. 800 lm luminous flux with a 160° beam spread. 33-LED SMD 5630 array in a dual-beam H4 configuration (Hi/Lo). Aluminum housing for heat dissipation and durability. Model 7LQ74Q58; CCC certified; color: Pure White. Intended for auto applications and emergency use. Specifications: Voltage 12V DC; Luminous Flux 800 lm; Beam Angle 160°; Power Tolerance ±1%; Dimmable: No; Light Source: LED bulbs; Color: Pure White; Warranty: 1 year; Type: Fog Driving Light / Headlight; Material: Aluminum. Fit: Designed for 12V automotive systems with H4 dual-beam housings, compatible with fog driving light setups and headlight applications.

Read more less

The Dual-Color Truck Side Tail Light Two-Pack provides reliable rear lighting for trucks, trailers, vans, and cars. The dual-color LEDs cover warm to neutral white tones (2000–4000 K) for flexible visibility. Ideal for replacing worn tail lights or expanding rear visibility on utility vehicles in varying weather. Dual-color LED output with warm-to-neutral white (2000–4000 K). 12–24 V DC operation for broad vehicle compatibility. Compact size 6.3 × 5 cm; ~40 g per light. ABS+PC housing, waterproof and rainproof. Low power consumption: 1.2 W per light. Two-light set included for easy replacement. Specifications: Color temperature 2000–4000 K; Material: ABS+PC; Size: 6.3 × 5 cm; Weight: ~40 g; LED power: 1.2 W per light. Fit: Suitable for standard side tail light mounts on trucks, trailers, vans, and cars.

Read more less

LED Car Light Controller for E‑Class vehicles provides a plug‑and‑play module designed for Mercedes-Benz W212 models (2014–2016). It integrates with the factory lighting system without reprogramming, preserving original signals. Ideal for upgrading to LED lighting or replacing a failing controller, this unit maintains compatibility with the car’s electrical system while minimizing ECU interference. Size about 16.5 x 13.5 x 5.7 cm; weight about 450 g; input 9–16V; nominal 12V; current 3.6A. C‑BUS smart chip provides broad OEM compatibility with the original wiring. Fits Mercedes-Benz W212 E-class (2014–2016); OE part A2129005424. Voltage range 9–16V with nominal 12V supply; current 3.6A. Plug‑and‑play design with built‑in surface-mount and through‑hole components; no programming required. Suppresses electrical interference to the vehicle computer for stable operation. Direct replacement for the original controller, preserving the existing harness. Optional light specifications: input voltage 9–16V; nominal 12V; current draw 3.6A. Fit: Mercedes-Benz W212 E‑class (2014–2016); OE part A2129005424.

Read more less

LED controller ballast designed for the Mercedes-Benz C-Class. This unit targets the W205 platform (2015–2018) and integrates with the vehicle’s electrical system. For replacing a damaged ballast or upgrading factory lighting, the module plugs into the existing harness without programming. It helps minimize interference with the car’s computer and preserves original system behavior. Compatible with Mercedes-Benz C-Class W205 (2015–2018) Uses C-BUS smart chip for original equipment compatibility Plug-and-play installation; no programming required Electrical specs: Input 9–16 V; 12 V nominal; 3.6 A Weight 250 g; size 16.5 × 13.5 × 5.7 cm Designed to minimize interference with the vehicle ECU OE reference A2059005010 Light specifications: weight about 250 g; dimensions about 16.5 × 13.5 × 5.7 cm; input 9–16 V (12 V nominal), 3.6 A. Fit: designed for Mercedes-Benz C-Class W205 (2015–2018); OE part A2059005010. Verify connector compatibility before installation.

Read more less

The LED Light Controller Driver is designed for daily use in selected Lexus and Toyota models, delivering a plug‑and‑play lighting control solution. It provides reliable control upgrades without software changes, keeping the vehicle’s original electronics intact. Weight about 100 g; size about 15.5 × 11.5 × 5 cm. Input 9–16 V; rated input 12 V; working current 3.6 A. Compatible with Camry 2014–2016 (SE/XLE/XSE) and Corolla 2014–2015 (ECO/LE/S/STD). Compatible with Lexus IS200t 2016 and IS250/IS300/IS350 2014–2017. C‑BUS smart chip provides seamless integration with original car equipment. Inhibits interference to the vehicle’s original computer for stable operation. Plug‑and‑play installation with automatic patch packaging; no programming required. Light specifications: Weight 100 g; Size 15.5 × 11.5 × 5 cm; Input range 9–16 V; Current 3.6 A. Fit: Direct replacement for listed Toyota and Lexus models; verify part numbers 85967-12010, 85967-02020, 81107-5375035500-701618.

Read more less

This HID ballast for Xenon lamps is designed for Toyota and Lexus vehicles, offering a compact 12V ballast with 35W output and reliable performance for stable operation. Ideal for replacing a failed ballast on models including Toyota GS300, ES350, IS250, IS350 (2006–2014) and Lexus LS460, RX400h, RX350. Plug-and-play design with built-in surface mount and through-hole components for direct replacement. No programming or codes required after installation; suitable for DIY replacement. Bulb compatibility with D4S and R8 xenon lamps. Electrical specs: 12V, 3.6A, 35W. Aluminum housing for durability and efficient heat dissipation. Dimensions roughly 15.5 x 11.5 x 5 cm; weight about 350 g. Fit: designed to mount with factory Xenon harnesses on the listed Toyota and Lexus models, and is compatible with common 12V wiring harnesses.

Read more less

This HID ballast is a direct replacement component for BMW 1 Series headlights, designed to restore stable HID operation. Ideal when the ballast fails or you’re refreshing the lighting without reprogramming. It supports D1S/R bulbs and fits models from 2012–2015. Weight and size: ~200 g; Dimensions: 15.5 x 11.5 x 5 cm Electrical specs: 12 V input, 3.6 A draw, 35 W HID ballast Light source & compatibility: HID module designed for D1S/R bulbs Construction: alloy body with built-in surface mount and through-hole components Installation: direct insert and play replacement; no programming required Compatibility note: suitable for BMW 1 Series F20/F21 (2012–2015); verify OE number Optional light specifications: 12 V operation, 3.6 A draw, 35 W HID ballast. Matches D1S/R bulbs. OE number verification recommended. Fit: BMW 1 Series F20/F21 (2012–2015).

Read more less

The Car T10 LED Bulb Extension Cable is designed to ease wiring for T10 LED bulb installations in tight automotive spaces. Ideal when extra length or flexible routing helps reach sockets under dashboards, seats, or door panels without modifying factory wiring. High-quality materials for reliable performance and durability. Durable, long-lasting connectors with high toughness to resist damage. Soft, flexible wires that are easy to route and plug-and-play ready. Plug-and-play design; no modifications to the stock wiring required. Heat resistant and less prone to melting in typical automotive temperatures. Fits standard T10 LED bulb sockets (wedge base) for common cars. Fit: Compatible with T10 LED bulb sockets in most vehicles. Confirm socket type before installation.

Read more less

The T10 194 W5W LED Car Light Bulb 2-Pack provides a compact, canbus-friendly option for parking and side lights in many vehicles. Designed for ground vehicles, this set offers maintenance-free operation, easy plug-and-play installation, and lower heat output to help extend bulb life. 2 bulbs included in the pack for convenient replacement T10/W5W LED bulbs with canbus-friendly design Low power consumption minimizes electrical load Reduced heat generation supports longer simultaneous use High shock resistance for reliable performance in vibrations Simple, maintenance-free installation with plug-and-play fit Brighter light relative to typical halogen W5W options Fit: designed for T10/W5W parking and side light sockets common in passenger cars.

Read more less

The Vehicle Side Marker Light is a 12V ABS unit designed for trucks, trailers, buses and wagons. Its compact housing fits standard side marker openings and supports clear signaling on low-light road conditions. Use it for side lights and taillight signaling on commercial fleets, RVs, or utility trailers. The plug-and-play design simplifies installation for DIY repairs or fleet maintenance. 6 SMD LEDs provide clear, even illumination. ABS housing with a 96 × 20 mm lens and a compact 100 × 20 × 8 mm body. 12V DC operation with low current draw. 28 cm cable length offers flexible mounting and wiring options. Weight approx. 150 g; designed for durability and long life. Suitable for buses, trucks, trailers, and wagons. Specifications: Voltage 12V; LED count 6SMD; Size 96 × 20 mm; Dimensions 100 × 20 × 8 mm; Weight 150 g; Cable length 28 cm. Fit: Compatible with 96 × 20 mm mounting openings on heavy vehicles; straightforward mounting.

Read more less

The 17cm Waterproof Daytime Running Light DRL LED Car Lamp is a compact, aluminum DRL designed for the Audi A6 2016. It uses a high-brightness LED sheet and a slim profile to fit tight spaces while delivering reliable daytime illumination. Use-case: For daytime driving, it enhances visibility and helps other road users notice your vehicle without glare. Dimensions and weight: 170 mm length, 15 mm width, 6 mm thickness; ~0.1 kg; aluminum housing and heat-insulated LED sheet. Color options: white, blue, or ice blue; shells black or silver. Electrical: DC 10–16 V; ~0.17 A; overload protection up to 18 V (≈1 h). Light output and temp: 6000–8000 K; symmetric left/right output; surface ~40 C at 20–30 C ambient. Durability: waterproof with environmental protection and flame-retardant construction; continuous operation up to 1000 hours; current drift ≤2 mA. Installation: direct ACC circuit connection; genuine 3M adhesive; clean surface, apply adhesive, then heat-activate for mounting. Fit: Compatible with Audi A6 2016 models; designed to install in DRL positions with standard mounting.

Read more less

LED Strobe Warning Light Blue, model SL-97, is a compact 12V DC beacon designed for security and engineering use. The blue LED array provides clear signaling in challenging environments. Ideal for field signaling on road cones, warning columns, guardrails, and construction sites. It supports continuous operation in dusty or harsh conditions and is suitable for mounting on various warning devices and emergency bikes. Model SL-97 LED strobe beacon with blue light 12 V DC input; current 30–50 mA depending on mode 15 high-brightness LEDs; strobe ≤120 flashes per minute; 2 flashes per second Size 7.2 x 4 cm; runtime up to 36 hours; service life ≥1000 hours Explosion-proof and dust-proof construction; field-ready mounting on cones, guardrails, and poles Visible range up to 200 meters at night Light specs: 12 V DC operation; 36 hours continuous operation; 200 m visibility; 15 LEDs for consistent flash Fit: Designed for direct mounting on standard road cones, telescopic cones, warning columns, and related fixtures with compatible brackets.

Read more less

2-Pack 12/24V LED Edge Tail Lights are compact, weather-resistant lights for trucks, trailers, and industrial vehicles. Each light uses a polycarbonate housing with 8 LEDs and measures about 12 × 4 × 2 cm. Designed for trucks, trailers, and construction equipment, these edge lights handle outdoor use. The waterproof and anti-fog design helps maintain visibility in rain, dust, and mud. DC 12–24V operation for compatibility with common truck, trailer, and equipment circuits. Each light contains 8 LEDs for bright, even illumination. Color options include red and yellow for signaling. Polycarbonate housing is waterproof and anti-fog. Includes mounting screws for quick installation. Three-wire harness: black to negative, yellow to positive, third yellow flashes for 2 seconds at power-up. Specifications: Size 12 × 4 × 2 cm per piece; weight ~70 g per pair; color temperature 2000–4000K. Fit: Compatible with 12/24V electrical systems on trucks, trailers, and engineering vehicles; check mounting hole spacing.

Read more less

12-24V LED Truck Side Tail Light designed for daily vehicle use. Made from ABS, it measures about 16.4 x 5.5 x 2.2 cm and weighs about 60 g. Ideal for trucks, trailers, and engineering vehicles, this tail light supports 12-24V DC systems and includes mounting screws for straightforward installation. ABS body offers corrosion and high-temperature resistance. Compact size: 16.4 x 5.5 x 2.2 cm; weight approx. 60 g. DC 12-24V operation with 16 LEDs and a color temperature of 2000–4000K. Two-wire or three-wire wiring options: black negative, yellow positive; white for low/high light in 3-wire mode. Screws included for quick, secure installation. Waterproof and rainproof construction for outdoor use. Light specifications: 16 LEDs provide steady illumination with a color temperature range of 2000–4000K. Fit: designed for 12-24V vehicle systems; verify mounting points and wiring compatibility before install.

Read more less

Car LED Streamer Hood Lights deliver ambient lighting along the hood edge, providing a subtle decorative glow with a straightforward, non-destructive installation. Use them for engine bay ambiance while parked, daytime running accent lighting, or quick checks at night without rewiring your vehicle. Material: PVC silicone with high temperature resistance and antifreeze crack protection Length options: about 1.5 m or 1.8 m to fit different hood gaps Electrical specs: 12 V input, 2 A current, 6 W power, 1200 lm luminous flux Remote: included button battery for easy on/off and mode selection Protection: IP678 sealed design for rain and dust resistance Installation: direct attachment in the engine gap; no wiring changes or drilling required Light specifications: 1200 lm, 6 W, 12 V, 2 A. IP678 rating. Available lengths: 1.5 m or 1.8 m. Fit and compatibility: designed for 12 V automotive electrical systems; suitable for vehicles with hood gaps that accommodate the 1.5 m or 1.8 m lengths, with simple, non-destructive mounting.

Read more less

This red trailer tail light is designed for straightforward installation on trucks, trailers, vans, and light construction vehicles. It operates on 12V DC and uses an LED light source. Use it to replace worn tail lights or outfit a new trailer, with a compact housing measuring 21.5 x 9.5 x 5.3 cm. Material: PC (polycarbonate) Light source: LED Voltage: 12V DC Color/appearance: Red lens; color temperature 2000–4000K Size/weight: 21.5 × 9.5 × 5.3 cm; net 330 g (gross 370 g) Compatibility: Suitable for pick-up trucks, trailers, vans, and construction vehicles with 12V systems Note: Includes tail light only; no additional components Specifications: Color temperature 2000–4000K; LED light source; 12V DC operation. Fit: Designed to fit standard tail-light openings on compatible trucks and trailers.

Read more less

Trailer Side Tail Light with 6 LEDs for trailers and trucks. Built from durable ABS plastic, it measures 12x3x2 cm and weighs about 30 g per piece with screws. This light serves as a rear position light or tail light, suitable for most trailers, trucks, and buses. It provides reliable illumination in wet conditions and easy replacement for worn units. ABS plastic housing for durability and impact resistance 6 LEDs with a light guide effect for even illumination IP67 waterproof rating for reliable performance in rain Voltage range 10–30 V; brightness increases with voltage (commonly 12–24 V) Screw spacing 10.5 cm; includes mounting screws and a rubber pad Suitable as position light or tail light on trailers, trucks, buses Connection: black wire is negative; connect yellow wire to bright yellow light. Includes lamp, self-contained rubber pad, and screws. Fit: Compatible with most buses, trucks, and trailers using 12–24 V systems; ensure mounting holes match 10.5 cm spacing.

Read more less