Indoor Lighting & Accessories

This 4 Pin Male RGB LED Strip Connector provides a solder-free connection for flexible RGB lighting. The PVC-bodied connector is sized for standard 4-pin RGB strip installations and keeps wiring neat while maintaining reliable contacts. Use it for under-cabinet accent lighting, DIY LED projects, or quick repairs where you need a fast join between a controller, power supply, or another strip. Tool-free attachment speeds installation and reduces assembly errors. Connector type: 4-pin male interface for RGB strips Material: PVC exterior for basic insulation and wear resistance Installation: Tool-free, push-fit design to avoid soldering Alignment: Maintains correct pin alignment to prevent miswiring Compatibility: Works with standard flexible 4-pin RGB LED strips Light specifications: 4-pin male, designed for flexible RGB LED strip systems. Fit: Compatible with standard 4-pin RGB LED strip components; check strip pin spacing before use.

Read more less

This 30 cm DC power extension provides a male-to-female 5.5 x 2.1 mm connection with an inline On/Off switch for simple, controllable power to small electronics. Use it to add a local power switch to LED strips, CCTV cameras, routers, printers, or other devices that use the common 5.5 x 2.1 mm barrel jack. It lets installers and hobbyists cut power without unplugging the supply. Connector: 5.5 x 2.1 mm male to female, standard polarity. Length: 30 cm flexible cable for tight routing. Switch: Inline On/Off rocker for quick control. Build: Compact housing protects the switch and connections. Installation: Plug-and-play with no soldering required. Specifications: Cable 30 cm; DC plug 5.5 x 2.1 mm; inline switch. Fit: Compatible with devices using a 5.5 x 2.1 mm DC input; check polarity before use.

Read more less

This 40 cm DC power extension cable extends 5.5 x 2.1 mm power runs for LED light controllers and similar devices. It features male and female barrel connectors and a PVC jacket for basic wear resistance. Use when the controller is separated from the power supply—on a shelf, behind TV cabinets, or mounted signage. Push-in connectors allow quick mating to reduce installation time and help keep cable routes tidy. Connector: 5.5 x 2.1 mm DC barrel, male to female Length: 40 cm (approx. 16 in) Material: PVC insulation and jacket for flexibility Connection: Push-in mating for tool-free setup Use: Extends low-voltage DC runs for LED controllers and devices Specifications: 40 cm length; compatible with standard 5.5 x 2.1 mm DC inputs. Fit: Designed to mate with common 5.5 x 2.1 mm DC jacks used by many LED controllers.

Read more less

This 30 cm LED light strip connector cable provides a solder-free link between 2-pin LED strips and compatible power feeds or controllers. Use it to extend runs, bridge gaps around corners, or connect a controller without opening strip endcaps. Suitable for DIY lighting, event setups, and concealed installations where a short, reliable jumper is needed. Length: 30 cm cable for short extensions and tidy routing Ends: 2-pin push-in male and female for tool-free connections Material: PVC plastic housing resists daily handling and flex Compatibility: Works with standard 2-pin LED strip systems, wall-washers, belt/curtain lights, and decorative strings Installation: Push-in connectors reduce assembly time; no soldering required Specifications: Length 30 cm; Material PVC; Ends 2-pin push-in (male/female). Fit: Designed for standard 2-pin LED strip ecosystems and compatible controllers/power supplies. Check strip pin spacing before purchase.

Read more less

This 5.5x2.1mm DC power cable connector with inline switch provides a compact connection and local on/off control for LED strip installations. The cable combines a standard DC barrel plug, PVC insulated lead, and a stainless-steel push-button switch for straightforward wiring and switching at the strip end. Use it for under-cabinet lighting, retail displays, signage, or short-run accent strips where accessing the power supply is inconvenient. Installers and DIY users can add a local switch without altering the main power supply or re-routing cabling. Connector: 5.5 mm outer, 2.1 mm inner barrel (standard DC size) Cable: 30 cm (12 in) PVC-insulated, flexible lead Switch: 304 stainless steel push-button inline control Compatibility: Works with LED strips and adapters using 5.5x2.1 mm DC plugs Installation: Quick inline insertion; verify polarity before connecting Light specifications: Match voltage and current ratings of your LED strip and power supply; not a power regulator. Fit: Fits most standard 5.5x2.1 mm systems—confirm connector gender and polarity prior to use.

Read more less

The 4-pin 2-way L-shape female connector provides a tool-free method to join standard 4-pin RGB LED strips at a 90° corner. Its compact PVC housing and snap-fit terminals simplify short runs and tight bends without soldering. Use this connector for under-cabinet lighting, retail signage, or decorative runs where a clean corner join is needed. Installers and hobbyists can route strips around corners or split a run into two directions while maintaining a consistent 4-pin connection. Design: L-shaped, 2-way configuration for 90° corner connections Material: PVC plastic housing with metal contact terminals Size: Compact 23mm x 23mm x 6mm footprint Installation: Push-fit, no soldering or tools required Application: Suitable for short runs, corners, and tight routing Specifications: External dimensions 23×23×6 mm. For use with standard 4-pin RGB LED strips. Fit: Compatible with standard 4-pin RGB LED strip connectors; verify strip width and pin spacing before installation.

Read more less

This 1 m DC barrel power cable connects devices using the common 5.5×2.1 mm barrel standard. One end is female, the other is male; the cable is black and intended for short inline power runs where the controller and supply are separated. Use it to link LED light controllers, small amplifiers, routers, or hobby electronics when the power supply cannot sit directly beside the device. Keeps wiring tidy for desk setups, small installations, and prototype projects. Connector: 5.5×2.1 mm DC barrel — female to male Length: 1 meter (approximately 3.3 ft) Color: Black Construction: Insulated jacket for indoor routing Use: Inline connection for LED controllers and compatible devices Light specifications: Voltage and current not provided — verify your device’s requirements before use. Fit: Compatible with devices using the 5.5×2.1 mm DC barrel standard; confirm connector orientation and polarity match your equipment.

Read more less

The 5.5x2.1mm DC Power Jack to Screw-Down 2-Conductor Connector converts a standard barrel jack into a screw-terminal power connection for tidy, tool-only wiring. Use it to connect LED light controllers, security cameras, routers or other devices where a clean, compact DC feed is needed. Screw-down terminals eliminate splices and tape, and the 39 mm length fits into tight enclosures. Connection type: 5.5×2.1mm barrel jack to two screw-down conductors Installation: Flathead or Phillips screwdriver only; no crimping required Form factor: Compact 39 × 14 × 13 mm to reduce cable clutter Terminals: Two-conductor screw contacts for bare wire or stripped leads Finish: Insulating housing with metal contact points for reliable contact Light specifications: Dimensions 39 mm × 14 mm × 13 mm. Fit statement: Compatible with devices that accept a 5.5×2.1mm DC input and require two-conductor wiring; check polarity before connecting.

Read more less

This 5.5 x 2.1mm DC power splitter converts one female input into three male barrel outputs for LED setups and small electronics. It provides a simple, plug-and-play way to distribute power without soldering. Use case: connect an LED light controller and two additional modules to a single 5.5 x 2.1mm power supply for synchronized lighting runs, testing benches, or compact installations where multiple devices share one adapter. Connector: 1× female to 3× male, standard 5.5 x 2.1mm barrel Compatibility: Designed for devices using the same barrel size and voltage range Installation: Plug-and-play, no tools or solder required Form factor: Compact, lightweight cable for tight spaces Safety note: Verify polarity and total current draw before connecting Light specs: cable length ~15 cm; black PVC insulation; typical for low-voltage DC use. Fit: compatible with LED controllers and power supplies that use 5.5 x 2.1mm connectors.

Read more less

This 5.5x2.1mm DC power cable splits a single supply into two male barrel outputs, offering a compact power distribution option for low-voltage LED controllers and related devices. Use it to power an LED controller and a secondary device from one adapter, reducing cable clutter in small installations such as under-cabinet lighting, display cases, or prototype benches. Connector: 1 × female 5.5 x 2.1 mm to 2 × male 5.5 x 2.1 mm Length: 35 cm overall for short-run splits Construction: flexible conductors with a durable outer jacket Connection: push-in ends for quick, tool-free setup Compatibility: fits standard 5.5 x 2.1 mm DC jacks used by most LED controllers Light specifications: 35 cm cable, low-voltage DC only. Fit statement: Compatible with common DC power adapters and controllers that accept 5.5 x 2.1 mm barrels; check polarity before use.

Read more less

The LED Dimmer Touch Switch is a compact, single-channel controller for constant-voltage LED lighting. It offers touch-sensitive brightness control for low-voltage installations in homes and offices. Use it to adjust LED strips, panel lights, spotlights or downlights on a 12V DC supply. Suited to retrofit and new installs where a slim controller and simple dimming are needed, it helps tailor lighting levels for work, displays, or ambient scenes. Control: One-channel touch dimming for a single LED circuit. Compatibility: Designed for 12V DC LED strips, panels, spots and downlights. Power: Maximum output 48W total load. Size: 27.9 cm × 2 cm × 1.1 cm; fits behind panels or inside junction boxes. Install: Constant-voltage design for straightforward integration into existing 12V systems. Specifications: 12V DC input, 48W max. Fit: Designed for 12V DC LED installations that require a compact, single-channel dimmer.

Read more less

The E27 Wireless Remote Control Lamp Socket lets you switch a standard E27 bulb from a distance using the included remote. Setup is plug-and-play: screw the socket into an existing fixture, insert a bulb, and pair the remote. Use it to control bedside lamps, living-room floor lamps, or office task lights without rewiring or smart-home hubs. Adjustable delay timing helps with automated shutdowns and avoids repeated trips across a room. Remote range: up to 20 m in open space for common room layouts Input voltage: AC 18–250 V, compatible with typical household circuits Frequency: 315 MHz with millions of codes to reduce interference Delay timer: adjustable up to 30 seconds for staged turn-off Material: ABS housing for lightweight, heat-resistant use Light specifications: Remote distance 20 m, Frequency 315MHz, Delay up to 30s. Fit: Compatible with standard E27 lamp sockets and common light fixtures.

Read more less

The Wireless Remote Lamp (brand: None) provides 360-degree illumination with a handheld remote for simple on/off control. Its neutral white and grey finish integrates with common decor while operating on 110–220V AC. Use it in living rooms, offices, or hotel rooms to add wall-mounted, hands-free lighting for reading, video calls, or ambient illumination during gatherings. The long remote range lets you change lighting from across a room without moving furniture. 360° illumination: Even light distribution for wide coverage. Remote control: Up to 50 m range, 315 MHz operating frequency. Power: 110–220V AC, 50/60Hz — fits standard outlets. Finish & fit: Neutral white + grey color, wall fixture design. Remote battery: Uses included 23A/12V battery for immediate use. Light specs: Incandescent light source; power 110–220V AC; frequency 315 MHz. Fit: Designed for rooms with standard outlets; suitable for living rooms, offices, and hotel rooms.

Read more less

The Ambient Light Control Sensor for Automatic Lighting adjusts fixtures based on ambient brightness and motion, using a brightness sensor and a 5.8 GHz microwave detector. Dial switches let installers set brightness, delay and detection range without tools. Use cases: designed for road lights, garden lights and walkway lamps where automatic night-only control and presence-triggered lighting reduce runtime and improve nighttime visibility. Suitable for homeowners, property managers and outdoor-lighting installers. Adjustable light threshold: 5, 10, 30, 100 Lux or Disabled via rotary switch. Delay settings: 5s, 15s, 3min, 5min, 10min to control hold time after detection. Detection distance: up to 10 m with 10/30/50/80/100% sensitivity options. Microwave sensor: 5.8 GHz ±75 MHz, < 0.2 mW output; 180° coverage. Mounting & enclosure: IP20; ceiling or wall mount, install up to 2.5 m high. Operation: load switching enabled only at night to prevent daytime activation. Specifications (selected): detection angle 180°, max install height 2.5 m, IP20 enclosure. Fit: installs on ceilings or walls up to 2.5 m; intended for outdoor road, garden and pathway lamps.

Read more less

The E27 to EU plug lamp socket with power switch converts a European wall outlet into a standard E27 bulb holder for quick, tool-free lighting. It provides a local on/off control without rewiring and is intended for indoor household use. Use it to add temporary bedside, desk, or closet lighting where a fixture is absent; suitable for renters, workshop benches, or decorative bulbs. It avoids ladder access to ceiling lights and works with common LED, CFL, and incandescent E27 lamps. Plug type: EU two-pin mains plug for 230V outlets. Socket: Standard E27 screw base compatible with common bulbs. Switch: Built-in on/off rocker for local control. Material: High-temperature resistant plastic housing for indoor use. Installation: Tool-free, direct plug-in setup; portable and removable. Specifications: Weight approx. 80–120 g; color: white; rated for typical household currents. Fit: Designed for standard E27 bulbs and EU wall outlets in home lighting applications.

Read more less

The E27 to E14 light bulb adapter converts a standard E27 socket to accept E14 bulbs for home lighting. It has conductive copper contacts and a fire‑resistant PBT housing for everyday use. Use it to power decorative bulbs, desk lamps, or small fixtures designed for E14 bases when only an E27 socket is available. Installation is tool‑free and reversible, avoiding socket replacement. Compact size: 65 × 38 × 38 mm; weight 12 g for low-profile fit. Materials: Copper contacts; fireproof PBT housing. Thermal resistance: High‑temperature tolerant for typical household loads. Compatibility: Works with standard E27 sockets and E14 (SES) bulbs. Installation: Tool-free; screw into E27 then fit E14 bulb. Specifications: 65×38×38 mm, 12 g, copper + PBT. Fit: Fits standard E27 sockets and supports E14 bulb bases; check fixture clearance and bulb wattage before use.

Read more less

The E27 Dual Socket Light Bulb Converter lets one E27 base power two screw-in bulbs, expanding lighting from a single fixture without rewiring. Use it to add brightness to bedside lamps, desk lamps, or living-room fixtures where extra light is needed but replacing the fixture is not practical. Tool-free installation makes swapping or removing bulbs quick. Dual E27 sockets — runs two standard screw-in bulbs from one E27 base. Material & finish — copper-plated body with nickel finish for electrical contact and corrosion resistance. Wide voltage range — compatible with typical household voltages (check bulb ratings). Compact design — fits most lamp bases without altering appearance. Tool-free setup — screw into existing E27 socket and install bulbs by hand. Light specifications: metallic color; copper plating with nickel. Fits standard E27 lamp sockets for common home fixtures. Fit: designed for fixtures rated for a single E27 bulb; verify fixture wattage limits before use.

Read more less

This AC adapter supplies 12V DC up to 5A for LED rope lights, accepting 110–240V AC input with multi-region plug options for travel or installations in mixed-voltage environments. Use it for under-cabinet accents, shelf lighting, or continuous perimeter runs where a stable 12V supply and flexible wiring are needed. Suitable for DIY installers and small commercial displays. Voltage & current: 12V DC output, up to 5A for runs requiring moderate load. Wide input range: 110–240V AC, 50/60 Hz for global compatibility. Connector flexibility: 5.5 × 2.1 mm barrel jacks plus 2-conductor screw-down terminations (male and female). Multi-region plugs: Interchangeable plug options reduce need for adapters on site. Practical wiring: Screw-down terminations allow direct connection without soldering or custom pigtails. Specifications: Input 110–240V AC; Output 12V DC, 5A; Connector 5.5×2.1 mm. Fit: Designed for LED rope lights that require a 12V DC supply up to 5A and 5.5×2.1 mm connectors.

Read more less

This compact white LED lamp provides daylight-color illumination in a small 29 mm × 21 mm package, suited for low-voltage DC installations. Color temperature is 6000–6500 K with a luminous flux of 800–900 lm, drawing 10 W at 10.5–12 V (1.0 A). Use cases: under-cabinet task lighting, shelf or closet illumination, and tight recessed housings where a low-profile LED module is required. Its daylight-white output helps reveal detail for tasks such as food prep, reading, or inventory checks. Compact size: 29 mm × 21 mm fits small fixtures and narrow housings. Daylight color: 6000–6500 K for neutral white visibility. High output: 800–900 lm suitable for localized task lighting. Low-voltage DC: 10.5–12 V operation simplifies wiring in existing 12 V systems. Simple installation: Small form factor and straightforward mounting for retrofit projects. Specifications: Power 10 W, Current 1.0 A, Color White. Fit: Designed for compact, low-profile fixtures that accept a 10–12 V DC LED module.

Read more less

The 100W High Power LED Lamp provides bright, white illumination for indoor workspaces with a daylight color temperature of 6000–6500K. Its compact white housing measures 56 × 53 mm and produces approximately 8,500 lumens for evenly distributed light. Designed for task-focused spaces such as kitchens, workshops, garages, basements, and small studios, the lamp supports clear visibility for detail work, assembly, and general room lighting without color shifting. Power: 100W at 32–36V DC, 3.0A drive current for stable output Light output: 8,500 lm with daylight (6000–6500K) color temperature Size & color: 56 × 53 mm module in white finish for unobtrusive installation Compatibility: For LED fixtures/drivers that support 32–36V modules Use case: Suited to task lighting where neutral, high-lumen output is required Specifications: 100W, 32–36V, 3.0A, 8,500 lm, 6000–6500K, 56×53 mm. Fit statement: Designed to fit fixtures accepting 32–36V LED modules and operating at 3.0A. Ensure driver compatibility before installation.

Read more less

This Wireless Touch Key RGB LED Controller provides tactile, hub-free color control for RGB LED strips with 12–24V systems. The touch ring lets you set one hue quickly and the controller outputs stable color to the strip via RF. Use in living rooms, retail displays, or backlit signage where fast, intuitive color changes are needed without a smartphone or app. Suitable for installers who want a compact, wall- or panel-mounted control point. Voltage: Supports DC 12–24V, compatible with common LED strip power supplies. Load capacity: Handles up to 216W total (use appropriate power supply and gauge). Color selection: Slide the touch ring for immediate choice from 16 million RGB colors. Wireless control: 433.92 MHz RF signal with an operating range up to ~30 m. Installation: Simple inline connection to standard RGB strips; no hub required. Specifications: 12/24V DC input; 216W max; 16M colors; 433.92 MHz; ~30 m range. Fit: Designed for 12V or 24V RGB LED strip installations in residential and commercial settings.

Read more less

The aluminum LED dimmer switch provides a compact, practical way to control brightness for DC-powered LED strip lights. Its aluminum housing helps dissipate heat and offers a low-profile appearance that fits under cabinets or behind displays. Use this dimmer for under-cabinet task lighting, display-case illumination, or shelf mood lighting where smooth, continuous dimming and simple operation matter. Install it inline with common 12V–24V LED strip systems for quick brightness adjustment. Material: natural aluminum housing for heat resistance and durability Dimming: smooth, continuous analog control for fine brightness tuning Compatibility: designed for common DC LED strip systems (12V–24V) Size: compact footprint for tight installations behind fixtures Finish: uncoated aluminum that integrates with metal or neutral interiors Light specifications: aluminum body; natural finish; for DC-powered LED strips. Fit statement: Compatible with standard LED strip configurations and typical DC power supplies for straightforward integration.

Read more less

This 80W LED lamp provides warm white illumination at 3300–3500 K and up to 6800 lumens in a compact 56 × 53 mm module. It is intended for low-voltage home lighting where stable, even light is needed without large fixtures. Use cases include living rooms, kitchens, and home offices requiring combined task and ambient lighting; the compact profile fits tight housings and retrofit installations where 32–36 V supply is available. Power: 80 W, draws 2.4 A at 32–36 V Luminous output: 6800 lm for bright ambient and task light Color: Warm white, 3300–3500 K for neutral warm tones Size: 56 × 53 mm compact module for constrained spaces Compatibility: Designed for fixtures accepting 32–36 V LED modules Light specifications: 80 W, 6800 lm, 3300–3500 K, 2.4 A @ 32–36 V. Fit: Designed to work with 80 W, 32–36 V low-voltage fixtures that accept a compact LED module profile.

Read more less

Compact 20W LED lamp designed for indoor home lighting, offering warm white illumination with a narrow footprint. The 56 × 53 mm body fits tight fixture housings and provides steady output for everyday use. Use this lamp in living rooms, kitchens, or home offices where a small lamp is needed for ambient or task lighting. Its 3300–3500 K color temperature produces a warm tone suited to residential spaces and relaxed work areas. Power: 20 W for consistent room-level lighting Luminous flux: 1400 lm to replace small halogen or incandescent sources Color: White, 3300–3500 K warm white Size: 56 × 53 mm compact form factor Electrical: 32–36 V input, 0.8 A operating current Light specifications: 20 W · 1400 lm · 3300–3500 K · 32–36 V · 0.8 A. Fit: Intended for compact indoor fixtures that accept a 32–36 V supply and accommodate a 56 × 53 mm lamp. Check fixture clearance and voltage compatibility before installation.

Read more less