Mobile Repair Parts & Tools

JIAFA 15-in-1 Repair Tool Set for Smartphone Fixes supplies a compact collection of hand tools for common phone repairs, including screen and battery replacement, case opening, and small-part removal. Designed for DIY smartphone maintenance, the set helps users perform precise tasks like removing screws, prying adhesive, and lifting displays without specialized equipment. It suits hobbyists, repair shops doing occasional work, and anyone needing on-the-go fixes. Tools included: opening stick, spudgers, suction cup, picks, tweezers, and 8 precision drivers. Screwdriver tips: 2.0mm cross, 1.5mm cross, 0.8mm pentalobe, 0.6mm tri-point, 2.0mm slot, T4 torx, T5 torx. Size & weight: compact, lightweight kit fits a small toolbox or pocket organizer. Material: metal screwdriver shafts with plastic handles; nylon/plastic pry tools for reduced surface damage. Accessories: suction cup for screen lift and a cleaning cloth for dust removal. Compatibility: works with most modern smartphones and small electronics using listed fasteners. Light specifications: 15 pieces total; assorted plastics and metal alloy components; single compact pouch for storage. Fit statement: Suitable for DIY technicians and consumers comfortable following repair guides; not a substitute for professional repair on complex faults.

Read more less

Replacement carbon steel blades sold in a 100-pack for precise trimming and scraping of mobile screen protectors and automotive window films. Use these blades for cutting adhesive edges, deburring film borders, removing residue, and preparing surfaces before installation. They are suitable for technicians and hobbyists who need repeatable, controlled cuts without damaging substrates. Material: high-strength carbon steel for consistent edge retention Pack size: 100 individually packaged blades to preserve sharpness and safety Size: approximately 4 x 1.9 cm; compact for detailed work Weight: about 2 g each for easy handling and reduced fatigue Compatibility: fits standard utility blade holders and many film scrapers Applications: mobile screen protector trimming, automotive film cutting, adhesive removal Light specifications: carbon steel construction, single-edge profile, disposable after wear. Fit statement: Designed to fit common utility holders and scraper tools; check holder dimensions before purchase for exact compatibility.

Read more less

Gooi Precision Steel Bend Tweezers are designed for tasks that require controlled, fine manipulation. The 45° bent tip and anti-acid stainless steel construction suit work in tight spaces where visibility and steadiness matter. Use-case: ideal for electronics assembly, watch repair, model building, and handling small components during inspection or soldering. The bent profile lets you reach recessed parts without removing nearby pieces, reducing rework and accidental contact. Bent tip design: angled tip for access to confined areas and improved sightlines. Material: anti-acid stainless steel resists corrosion and minimizes magnetic interference. Hardened edge: maintains tip alignment and shape through repetitive use. Ergonomics: smooth, finely finished lines reduce hand fatigue during extended tasks. Weight: lightweight yet rigid for steady control and reduced tremor transfer. Specifications: length ~120 mm, tip width ~1.2 mm, color: matte steel finish. Fit: suitable for hobbyists, technicians, and professionals needing precise, low-magnetic tweezers for small-part handling.

Read more less

The QIANLI 009 Plus multi-function blade set is designed for precision repairs on small electronics. It bundles 30 blade models and a balanced handle to support detailed cutting and scraping tasks. Use this set for smartphone disassembly, removing edge glue from motherboards, CPU or NAND baseband chips, and for hobbyist electronics work. The side glue cleaning tool helps clear adhesive from tight component gaps without using bulk tools. 30 blade models for varied cutting, scraping and trimming needs. Side glue cleaning tool for adhesive removal around chips and sockets. Low-gravity center knife handle improves balance during fine work. Screw-texture handle enhances grip to reduce slippage. Compact kit suited to bench repairs and portable tool kits. Light specifications: compatible with standard phone repair workflows and small electronic assemblies; blades cover a wide range of precision profiles. Fit: Suitable for technicians and DIY enthusiasts performing routine precision maintenance and component-level repairs.

Read more less

This stainless steel pry tool is designed for controlled disassembly of laptops, smartphones and tablets. The forged stainless-steel construction is corrosion-resistant and intended for repeated use without bending. Use it to open device casings, lift screens, and access batteries or internal modules during routine repairs. The rolling-wheel design improves leverage at seams and reduces pressure points that can cause scratches or cracking when prying edges. Material: Forged stainless steel for durability and corrosion resistance. Design: Rolling-wheel tip for smoother edge engagement and controlled force. Compatibility: Works with laptops, smartphones, tablets and other electronic accessories. Handling: Lightweight, balanced profile for extended repair sessions. Precision: Narrow tip geometry for threading between clips and small seams. Specifications: stainless steel construction, single-tool format, intended for manual use. No electrical or powered operation. Fit statement: Fits standard repair kits and hand tool rolls for technicians and DIY device maintenance.

Read more less

This 63-in-1 screwdriver set is built for detailed electronics maintenance, with a compact drawer case and a magnetic alloy handle. It groups 62 bit types plus a double-ended extension to cover common small screws found in consumer electronics. Use cases: disassembling smartphones, laptops, game consoles, cameras and small appliances. The rotatable tail and magnetic base support precise control during screw removal and reassembly, reducing dropped fasteners and simplifying repeated jobs. Bit range: 62 bits including Phillips, flathead, Torx, hex and specialty heads for electronics. Materials: CR-V steel bits with up to 60 HRC hardness; alloy handle for durability. Magnetic system: Strong magnetic handle and base to hold bits and screws securely. Storage: Drawer-style, double-sided case for organized, portable storage. Ergonomics: Rotatable handle tail for controlled torque and comfortable use. Light specifications: CR-V steel bits, alloy handle; compact case dimensions approx. 7 x 3 x 1.5 in. Fit: suitable for DIY enthusiasts and technicians working on small electronics; fits standard precision repair tasks.

Read more less

The iRepair BOX P10 is a wired service tool for iPhone maintenance that allows access to system configuration and Wi‑Fi data without physically opening the device. Designed for technicians, it streamlines tasks such as recovering Wi‑Fi credentials, updating system configuration, and changing serial or Bluetooth values while preserving device assembly and minimizing handling risk. Non‑disassembly access: read/write syscfg, serial numbers, Bluetooth/Wi‑Fi codes and camera data without removing NAND on supported models. Model support: compatible with iPhone 7, 7 Plus, 8, 8 Plus, and X; free upgrade path for iPad models. Wi‑Fi unpacking: one‑click extraction for iPhone 8/8 Plus/X Wi‑Fi data without NAND removal. DFU and IC kit support: one‑click DFU entry and no NAND removal required when changing IC kits on supported phones. Software: automatic software updates; requires Windows 7, 8, or 10. Workflow: reduces teardown time and keeps device housing intact for routine configuration and recovery tasks. Light specifications: cable‑based interface, Windows driver required, color and enclosure details per unit supplied. Fit statement: Intended for professional repair shops and technicians working on listed iPhone models.

Read more less

Set of 10 plastic clips designed to hold mobile phone and small tablet screens during repair. Each clip secures casing and glass while adhesive cures, reducing movement and alignment issues. Use-case: apply adhesive, align the screen, then place clips at opposing edges to keep parts flush. Suitable for DIY repairs, small repair shops, or tech hobbyists who need temporary, non-marring pressure during bonding. Size: 10 cm long × 5 cm wide for easy handling and reach. Material: lightweight plastic that resists bending under light pressure. Set quantity: 10 clips to support multiple points or concurrent repairs. Weight: ~18 g per clip, adds minimal bulk to a toolkit. Compatibility: adjustable fit for most phone and small tablet screens. Light specifications: non-conductive plastic; each clip opens wide enough for standard bezel profiles. Fit statement: clips accommodate most common phone and tablet thicknesses; check bezel depth before use for optimal fit.

Read more less

The iPhone 13 Screen Repair Positioning Mat with Frame Bezel is a metal alignment tool designed to hold the display and frame in the correct position during screen replacement. Use this mat to secure the iPhone 13 chassis and glass while loosening adhesives, reconnecting flex cables, or testing the display. It helps maintain correct bezel alignment and reduces repeated adjustments for both technicians and DIY users. Material: durable metal plate for stable support and repeated use Compatibility: designed specifically for iPhone 13 screen replacement and frame bezel alignment Design: integrated frame bezel cutout to position housing and display accurately Portability: compact, lightweight layout for bench use or transport Workflow: keeps components accessible for soldering, cable routing, and adhesive application Specifications: metal construction; approximate footprint 160×80 mm; weight 120 g (measurements vary by batch). Fit statement: Made to fit iPhone 13 models only; not compatible with other iPhone sizes or generations.

Read more less

JIAFA Magnetic Mat for Organizing iPhone X Screws provides a flat, color-coded workspace for sorting and holding small ferrous screws during smartphone or small electronics repair. Use-case: place removed screws by location and type while disassembling an iPhone X or similar device to avoid mix-ups and speed reassembly. The mat's magnetic zones and labeled sections help track fasteners and small parts during multi-step repairs. Magnetic surface: holds ferrous screws and small metal components in place. Color-coded layout: sections for different screw types and positions reduce errors. Non-magnetic areas: designated spots for plastic pins or non-ferrous parts. Flexible arrangement: adaptable grid suits common repair sequences and parts grouping. Compact storage: rolls or folds for a small footprint on a bench or in a toolkit. Light specifications: silicone or rubberized mat with embedded magnets, approximately 210 x 150 mm, black with colored sections; compatible with iPhone X and similar smartphones. Fit statement: compact dimensions suit hobbyists and bench technicians and fit standard workbench spaces and repair kits.

Read more less

The Qianli Hexagram Pry Tool is a slim metal pry implement with integrated precision scales for electronics repair. Its ultrathin profile and measured markings help technicians and hobbyists make controlled separations on small devices. Use this tool when removing screens, back covers, or adhesive layers on smartphones, tablets, and other compact electronics. The thin edge slides into tight seams; the scales guide consistent gap measurements to reduce trial-and-error and limit stress on fragile components. Ultrathin metal blade: reaches narrow seams and under-screen adhesives without bending. Built-in precision scales: millimeter markings for repeatable gap control and positioning. Ergonomic grip: lightweight profile for steady handling during extended repairs. Non-marring edge: designed to minimize surface scratching on housings and frames. Flexible but durable: balances rigidity and bend for levered prying tasks. Compact size: fits toolkit pockets for field or bench repairs. Light specifications: metal construction; ultrathin blade; approximate length 120–140 mm (varies by SKU); color: metallic steel. Fit statement: Suitable for small-form electronics repair and maintenance; compatible with most smartphone and tablet housings.

Read more less

Plastic Spudger and Triangle Prying Tool Set — 5 each. A compact kit of five plastic spudgers and triangle pry tools for routine electronics disassembly and component access. Use this set when replacing smartphone screens, separating tablet frames, or opening small appliances for repair. The non‑abrasive plastic helps reduce scratching while allowing controlled prying and leverage in tight seams. Set contents: five tools including flat spudgers and triangle picks for varied angles. Material: rigid plastic with a non‑abrasive finish to protect plastic and glass surfaces. Design: slim profiles fit narrow gaps; triangle shape supports steady leverage. Grip: molded edges for better hold during precision work. Portability: compact pieces store easily in a toolbox or pouch. Replacement-ready: extras included to avoid interruptions across multiple projects. Light specifications: plastic construction, set of five, includes spudger and triangle pry shapes. Fit: Suitable for hobbyists and technicians working on smartphones, tablets, laptops and other small electronics.

Read more less

The Mechanic & Xili 6-in-1 Magnetic Screwdriver Set is a compact toolkit for phone and small-device repairs, with six commonly used bits and an aviation-aluminum handle for repeated use. Use this set for tasks like screen removal, battery swaps, connector tightening, and small hinge adjustments on smartphones and tablets. It targets common repair points where screw retention and precise bit fit are required. Compact kit: six bits (0.6 mm, 0.8 mm, 1.2 mm, T2, 1.5 mm, 2.5 mm) for tight electronics work. Magnetic tips: extra-hard, magnetized ends hold small screws during alignment and insertion. Handle material: aviation-grade aluminum body for a lightweight, durable grip. Grip design: three-dimensional bit interface and anti-slip texture for controlled torque and reduced slippage. Portability: slim profile for storage in a toolkit, pocket, or repair pouch. Specifications (light): total set weight is lightweight; bits are hardened steel; color: natural aluminum finish. Fit: suitable for technicians and hobbyists working on most phones and tablets; not intended for large electronics or high-torque applications.

Read more less

Compact 9-in-1 repair tool set for iPhone maintenance, designed to support common at-home or workshop repairs. The set groups essential pry tools, drivers, and a suction cup into a portable kit for device access and component handling. Use case: suitable for screen removal, battery swaps, and internal connector work on iPhone models that use Pentalobe, Tri-point, or standard screws. Intended for DIY enthusiasts and technicians who need precise, low-force tools for delicate assemblies. Includes: suction cup, two plastic opening picks, two spudgers, four screwdrivers. Screwdriver sizes: Phillips 1.5, Tri-point 0.6, Pentalobe 0.8, Flathead 2.0. Materials: plastic picks and spudgers for non-scratching prying; metal shafts for driver tips. Design: compact layout for toolbox storage and portability. Safe handling: low-profile picks and spudgers reduce risk to trim and screen edges. Light specifications: kit color varies; components sized for small electronics repair. Compatibility: intended for iPhone models using listed fasteners. Fit statement: fits standard iPhone screw patterns and common repair tasks; verify screw type on your model before use.

Read more less

This grey heat insulation working mat provides a compact, protective surface for electronics soldering and small-component assembly. It is designed to resist heat, limit slips, and reduce static risk during repair or prototyping tasks. Use it on benchtops, hobby workstations, and field repair kits when you need a portable, non-slip base for circuit boards and components. The mat supports direct soldering with standard irons and helps keep parts stable for precise solder joints. Size: 10 x 10 cm compact footprint for tight work areas and easy storage. Material: heat-resistant construction that withstands repeated soldering sessions. Color: neutral grey to minimize visual distraction around components. Anti-slip: textured surfaces on both sides to prevent movement of boards and tools. Anti-static: built-in ESD-reducing properties to lower electrostatic discharge risk. Light specifications: compatible with standard soldering irons; suitable for small PCBs and components. Fit statement: Best for hobbyists and technicians needing a portable, protective mat for small-scale soldering and repairs.

Read more less

The 26-in-1 Crowbar and Spudger Tool Kit supplies a selection of pry and lift tools for electronics disassembly and reassembly. Use it to open smartphones, tablets, laptops and other small electronics for battery replacement, screen swaps, connector reseating or component inspection without metal-on-plastic abrasion. Comprehensive set: 26 specialized pieces including crowbars, spudgers and precision pry tools for different panel gaps and connector types. Materials: Mixed metal and plastic components provide a balance of rigidity and flexibility for safe prying. Ergonomics: Shaped handles and slim profiles improve control during detailed tasks. Compatibility: Designed for common devices, including iPhone models, Android phones, tablets and small laptops. Portable: Compact layout stores in a toolbox or pocket for on-site or at-home repairs. Light specifications: Metal blades with plastic-tipped spudgers; compact footprint for travel. Fit: Suited to electronics hobbyists and technicians needing a multi-tool pry kit for routine teardown and repair work.

Read more less

The JIAFA Tri-point 0.6 Screwdriver is a precision repair tool designed for iPhone 7, 7 Plus and compatible Apple Watch models. Use it for small electronics maintenance at home or in a field kit: removing and reinstalling tri-point screws during battery or screen work, or when servicing watch straps and internal parts. Tip size: 0.6 mm tri-point tip for accurate engagement with Apple tri-point screws. Material: Hardened steel tip with corrosion-resistant finish for repeated use. Handle: Ergonomic, non-slip grip to reduce hand fatigue during precise tasks. Portability: Compact, lightweight design fits standard tool rolls and pockets. Control: Narrow shaft and firm tip reduce cam-out and surface marring when aligned correctly. Specifications (light): overall length ~100 mm; shaft diameter ~2.5 mm; color: black handle with silver shaft. Fit statement: Intended for repair on iPhone 7, iPhone 7 Plus and Apple Watch models that use 0.6 tri-point screws; verify screw type before use.

Read more less

The Mechanic Mortar Mini iShell Phillips 1.2mm precision screwdriver is built for small electronics work, offering a focused 1.2mm Phillips head, magnetic tip, and low-friction rotation for controlled screw handling. Use it for opening mobile phones, tablets, cameras, toys and other compact devices where access is tight and fastener sizes are small. The compact length and lightweight magnesium silicon alloy body make it easy to carry in a toolkit or pocket. Tip size: Phillips 1.2mm, designed for common micro-electronics fasteners Material: magnesium silicon alloy handle for reduced weight and steady grip Rotation: noise-reduction bearings enable smoother turning and fingertip control Magnetic tip: holds small screws to reduce drops in confined spaces Compatibility: suitable for smartphones, laptops, cameras, hobby electronics Light specifications: compact form factor for one-handed use; corrosion-resistant tip finish. Fit statement: size and tip profile match standard small Phillips fasteners; ideal for hobbyists and technicians performing routine electronics maintenance.

Read more less

The Non-Slip Engraving Cutter Knife Handle is a 12 cm aluminum tool designed for controlled, precision cutting and engraving. Its pen-like profile and textured surface help maintain a steady grip for detailed work. Use cases: suitable for hobby engraving on metal, wood, or plastic, small repairs, stencil cutting, and delicate craft projects. The handle’s balance and lightweight construction reduce hand strain during repeated strokes and fine maneuvers. Material: CNC-finished aluminum for low weight and consistent feel Grip: Non-slip textured surface to resist rotation and slipping Compatibility: Accepts common cutter/engraving blades with a tightening nut Size: 12 cm length for pen-style control and reach Assembly: Simple insert-and-tighten design for quick blade changes Specifications: 12 cm aluminum handle, silver color, single-handle design. Fit: Fits users who need precise manual control—artists, model makers, and DIYers who prefer a pen-style engraving grip.

Read more less

The Kaisi K-12 Fixture Holder provides a stable work platform for maintenance of iPhone 12, 12 mini, 12 Pro, and 12 Pro Max devices. It combines a heat-resistant working surface with a thick metal base to support delicate repair tasks. Use-case: designed for technicians performing motherboard removal, chip disassembly, PCB separation, or other precision tasks where visibility and stability matter. The fixture keeps the device positioned and heat managed during soldering or component extraction. Material: high-temperature synthetic stone panel for heat absorption and dispersion. Base: extra-thick stainless steel with integrated heatsink and non-slip pad for stability. Design: ultrathin profile and compact footprint for improved visibility and portability. Positioning: high-precision notches for accurate alignment of iPhone 12 series models. Compatibility: fits only iPhone 12 / 12 mini / 12 Pro / 12 Pro Max. Light specifications: compact dimensions for bench use, lightweight for transport; materials chosen for thermal resilience. Fit statement: suitable for technicians and repair stations that work specifically on the iPhone 12 series and require a stable, heat-managed fixture. Brand: Kaisi.

Read more less

This Jakemy 47-in-1 precision magnetic screwdriver set provides a compact toolkit for small repairs and electronics maintenance. Bits are made from chrome vanadium steel for wear resistance and consistent fit. Use it for smartphone and tablet disassembly, laptop and game console repairs, hobby electronics, and household items like eyeglasses or toys. The magnetic tips and rotating cap improve control in tight spaces and reduce dropped fasteners. 47 interchangeable bits: Includes Phillips, slotted, Torx, pentalobe and specialty sizes. Chrome vanadium steel: Hardened bit material resists stripping and maintains edge. Magnetic tips: Hold screws for one-handed placement and retrieval. Ergonomic handle: Non-slip grip with rotating cap for steady torque and precision. Portable case: Foam-organized storage for on-the-go repairs and easy bit selection. Light specifications: Approx. 15 cm length, weight under 300 g. Fit statement: Suitable for hobbyists and technicians working on small electronics; check device screw types for compatibility before use.

Read more less

This Kaisi demolishing pen is a handheld tool designed for controlled removal of rear camera glass on smartphones. It provides adjustable intensity settings and a slim form factor for focused work on small camera openings. Use cases: DIY repairers and technicians can use the pen to break adhesive-bonded camera glass on iPhone, Samsung, Huawei, and Xiaomi models while limiting contact with nearby components. It is intended for post-disassembly lens removal where precision is needed. Precision control: Adjustable intensity settings for gradual glass removal. Device compatibility: Suited to many iPhone, Samsung, Huawei and Xiaomi rear camera modules. Compact size: 13 x 115 mm slim profile fits toolkits and tight spaces. Durability: Multiple layers of waterproof and dustproof protection on the tool body. Minimizes force transfer: Designed to avoid excessive pressure on the back shell and surrounding components. Light specifications: slim design for easy handling; portable length for storage in repair kits. Fit statement: Intended for technicians and informed DIY users familiar with smartphone disassembly procedures.

Read more less

The Findx F11-mini Jig is a compact alignment tool for repositioning PCB BGA parts on iPhone 11, 11 Pro, and 11 Pro Max logic boards. It provides a stable platform to aid precision during rework and soldering operations. Designed for repair technicians and experienced DIYers, the jig helps hold boards steady for accurate relocation of BGA components, re-bombardment cycles, and targeted solder removal without shifting adjacent parts. Precision alignment: hole pattern and seating points guide component placement for repeatable results. Solder ball removal: unique hole design simplifies access to formed solder balls during cleanup. Rework friendly: supports quick re-bombardment cycles while maintaining component position. Compact size: approx. 13 x 9 x 1.7 cm for bench-top use and easy storage. Secure fit: shaped to align with iPhone 11 series board outlines for stable handling. Light specifications: measures 13x9x1.7cm; color and material as supplied. No power required. Fit statement: Compatible with iPhone 11, 11 Pro, and 11 Pro Max logic boards for targeted BGA repairs.

Read more less

This stainless steel PCB holder provides a stable platform for circuit board repair and maintenance. It combines stainless steel and plastic construction with an anti-static black layer to protect sensitive components. Use it when soldering, cleaning, or replacing chips on compact devices such as iPhone boards. The fixed holes and high‑temperature resistant surface enable hands‑free work and easier access to small components during heat‑intensive tasks. Material: Stainless steel frame with plastic supports and anti‑static black coating. Compatibility: Includes specific hole patterns for iPhone 6/6S chip positions; suitable for similar-sized boards. Heat resistance: Surface tolerates soldering temperatures for short-duration repair work. Stability: Compact footprint fits on a workbench and holds boards securely for precise positioning. Access: Open design allows direct tool and flux access without removing the board from the holder. Specifications (light): approx. 120 x 90 x 20 mm; color: black/silver; weight: ~120 g. Fit statement: Designed for technicians and hobbyists working on small phone PCBs; verify board dimensions against the holder before use.

Read more less