The T7000 Multi-Purpose Adhesive is a transparent glue formulated for bonding a wide range of materials in crafts and home repairs. Use it for rhinestone jewelry, small plastic fixes, fabric trims, or light electronic assembly where an invisible bond is needed. The needle-tip applicator helps control small drops and reduces mess. Material compatibility: bonds glass, acrylic, PVC, PE, PP, fabrics, nylon and rubber. Appearance: clear finish that minimizes visible residue on transparent or colored surfaces. Application: needle-tip for precise placement and easy resealing after use. Performance: elastic formulation resists impact and supports flexible joints. Sealing: provides resistance to air and liquids; suitable for waterproofing small seams. Drying time: surface sets in about 3 minutes for quick handling. Light specifications: transparent liquid, cartridge/tube dispenser, needle applicator; weight and volume vary by pack. Fit statement: suitable for DIY hobbyists and homeowners needing a clear, flexible adhesive for small repairs and craft projects.

Read more less

This infrared test cable is a diagnostic accessory for Face ID maintenance on compatible iPhone 11 series devices. It connects to the phone’s Face ID module to enable imaging checks and signal tracing without repeated full disassembly. Use-case: technicians attach the cable to the infrared dot‑matrix module to extend the connection for imaging tests, adjust camera alignment, and observe i2c traffic while the device is partially assembled. This helps isolate sensor or trace issues during repair workflows. Compatibility: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max. Interface: for use with i2c host systems only. Function: extends Face ID infrared dot‑matrix connection for testing and imaging adjustments. Workflow benefit: allows in‑place debugging to reduce repeated disassembly during troubleshooting. Use case: suitable for component‑level diagnostics and alignment checks on Face ID modules. Specifications: connector type — i2c-compatible test lead; application — Face ID infrared module diagnostics. Fit statement: intended for professional repair technicians working on iPhone 11 series Face ID diagnostics.

Read more less

The i2C Battery Test Flex Cable is a compact FPC flex cable for non-invasive iPhone battery diagnostics. It displays live battery data and guides the user through tests without removing the battery. Designed for repair shops and technicians, the cable connects to compatible hardware to run automatic checks, show real-time parameters on the phone, and use LEDs to indicate test status. It reduces bench time for common battery faults and helps decide whether replacement or calibration is needed. Automatic testing and guidance — runs diagnostics and triggers phone pop-ups for step-by-step actions. Dual LED indicators — green/blue for testing status, red/yellow for guidance alerts. Flexible FPC material — twistable and foldable for tight repair spaces. Live data display — shows battery voltage, charge state and related readings on the connected device. Non-invasive — operates without battery removal to preserve device integrity. Light specifications: thin, flexible design suitable for narrow phone interiors; color indicators as listed. Fit: compatible only with the i2C i6S intelligent programmer; verify compatibility before purchase.

Read more less

The Face ID Repair Flex Cable for iPhone Face ID Fixes is a replacement flex designed to restore dot‑matrix Face ID detection without removing optical elements. It aims to enable repairs with minimal disassembly and no soldering. Use cases: troubleshoot faulty Face ID sensor response at home or in a repair shop, perform quick diagnostics, or provide a non‑invasive service option for walk‑in repairs. Suited to tech‑savvy users and entry‑level repairers who want a practical fix without advanced tools. No soldering required: plugs into existing connectors to reduce repair complexity. No optical disassembly: maintains camera and dot‑matrix assembly integrity. Soft, durable flex material: flexible ribbon designed for repeated handling and routing. No alignment step: factory‑preconfigured connector positions to simplify installation. Model compatibility: fits select iPhone models that use the same Face ID flex layout. Specifications (light): flex cable length ~30–40 mm, color: black, material: polyimide ribbon with plated contacts. Fit statement: check your iPhone model number to confirm compatibility before purchase.

Read more less

The iPhone LCD Screen Truetone Repair Module is a replacement module designed for technicians and DIY users addressing touch, TrueTone, and ambient light detection issues on compatible iPhone models. Use this module when replacing faulty screens or restoring TrueTone functionality without advanced board-level work. It permits LCD code read/write for machine code verification and avoids alignment or soldering steps, simplifying bench repairs. Repairs: touch input, TrueTone, and light detection functions Data handling: full LCD code read and write for secure verification Setup: no alignment required, streamlines installation No soldering: reduces risk of heat damage during repairs Intended users: technicians and DIYers with basic electronics experience Light specifications: compatible with iPhone 7–11 series; supports machine code checks and standard display communication for those models. Fit statement: designed to fit replacement screens for the stated iPhone 7–11 models when used alongside compatible display assemblies and standard repair tools.

Read more less

The Kaisi 17-Inch LCD Screen Separator is a bench tool for removing bonded glass and touch assemblies on devices up to 17 inches. The all-aluminum heating plate and adjustable controls provide steady, controllable heat for separation tasks. Use-case: suited for repair technicians and advanced DIYers handling smartphones, tablets, and laptop displays. It reduces manual prying and uneven heat, helping lower the risk of cracking glass or damaging flex cables during disassembly. Heating plate: all-aluminum construction for even heat distribution across large panels. Temperature range: 40–250°C adjustable for different adhesives and panel types. Air pump: built-in double air pump with single or dual mode for flexible suction and release. Anti-static body: protects sensitive LCD/LED assemblies and flex connectors. Accessories: silicone sealing pad and smooth metal plate to secure screens during separation. Design: porous surface accommodates various screen sizes; 280W power rating. Specifications (light): 17-inch max, 40–250°C, 280W, aluminum plate, silicone pad included. Fit: fits screens up to 17 inches—verify device dimensions and panel type before use.

Read more less

This 115 in 1 precision screwdriver set groups 98 interchangeable bits with multiple accessories to handle everyday repairs on electronics and household items. Use cases: disassemble laptops for upgrades, replace phone screens, service cameras, tighten TV mounts, or adjust small appliances. The telescopic handle and extension shafts reach recessed screws while pry tools and tweezers aid safe component removal. Bit variety: 98 precision bits including Phillips, flathead, Torx, hex, triangle and specialty shapes for phones, watches and TVs. Materials: Chrome vanadium bits (55–60 HRC) for wear resistance; polypropylene case for organized storage. Handles & extensions: Telescopic handle, soft/hard extension shafts and an extension rod for tight or deep fasteners. Accessories: Plastic crowbars, triangle pry tools, tweezers and a magnetization tool to ease assembly and disassembly. Portability: Compact case keeps bits labeled and secure for workshops or travel. Light specifications: 115 pieces total; 98 bits; chrome vanadium; polypropylene case; assorted colors for tools. Fit statement: Suited to DIY hobbyists and technicians working on small electronics and household repairs.

Read more less

The NCK PRO2 2-in-1 Dongle is a compact tool for unlocking and resetting phones without external servers or credits. It operates standalone and supports a wide range of firmware versions and provider IDs. Use cases include on-site repairs, multi-SIM troubleshooting, and code resets for devices with hardware or SP locks. Technicians can read and restore backups and perform firmware transfers between units. Standalone operation: no server codes or credit system required for immediate use. Wide compatibility: works with all firmware versions and provider IDs for broad device support. Unlock and reset: quick procedures for unlocking, user code resets, and handling automatic SP locks. Backup functions: read and restore backups to preserve user data during service. Firmware support: enables firmware upgrades and transfers between compatible devices. Light specifications: COM port speed up to 921600 bps. Fit statement: Suited for experienced technicians and advanced users who perform phone maintenance, unlocking, and firmware tasks and need a direct, offline solution.

Read more less

2UUL 10cc UV Curable Solder Mask is a compact solder mask formulated for targeted electronics repairs. The 10cc dispenser supports multiple small-board repairs and is intended for precise masking of solder joints during component replacement. Use on circuit boards in smartphones, laptops, small appliances and hobby projects to protect adjacent pads and reduce risk of solder bridging. Apply with a fine-tip tool, cure under a UV lamp or sunlight, and trim or remove as needed for rework. Fast cure: visible set in ~30 seconds; recommended 3 minutes for improved adhesion. Volume: 10cc tube suited for repeated small repairs. Compatibility: UV-curable material works with standard UV LEDs or natural sunlight. Application: low-viscosity formula for accurate placement with a needle or syringe. Safety tips: use gloves, eye protection, and work in a well-ventilated area. Specifications: 10cc, UV-curable polymer. No solvents required for initial cure. Fit: suitable for hobbyists and technicians performing board-level rework on small electronics.

Read more less

The Mechanic Ultra-Thin Carbon Steel Repair Blade is a compact precision tool for small repair and craft tasks. Its 0.1 cm thin carbon-steel construction balances stiffness and flexibility for controlled prying and scraping. Use-case: designed for screen removal, frame disassembly, glue and adhesive scraping, light wire trimming, and delicate craft or grafting work. Suited to hobbyists, repair technicians, and anyone doing electronics or small-scale garden grafting where surface protection matters. Material: carbon steel blade for wear resistance and edge retention Thickness: ultra-thin 0.1 cm profile for inserting into tight seams Edge: sharp scraping/cutting edge for clean separations and adhesive removal Size: approximately 3.9 x 2 cm for one-handed control and storage Weight: ~1.5 g to reduce hand fatigue during precise work Specifications (approx.): 3.9 x 2 cm; 0.1 cm thick; 1.5 g; carbon steel; uncoated natural metal finish. Fit: compact size fits standard small repair kits and most hobby tool organizers for immediate access during repairs.

Read more less

The Rear Camera Extension Test Flex Cable is a diagnostic tool for iPhone rear camera repairs, designed to extend the camera connection so technicians can verify functionality without full disassembly. Use it to isolate wiring faults, confirm image capture and focus during repairs, or maintain camera access while replacing nearby components. Suitable for repair benches and mobile technicians testing multiple units. Extends camera wiring for easier access during diagnostics and reassembly checks. Durable flex design tolerates repeated connect/disconnect cycles in workshop use. Standard connector interface matches original camera flex connections for straightforward testing. Quick fault isolation helps identify loose contacts and intermittent signals without removing the full assembly. Portable and compact for inclusion in repair kits and on-site service bags. Light specifications: flexible ribbon cable with reinforced connector; typical length for bench access; color and exact pinout vary by model. Fit: compatible with various iPhone rear camera assemblies—verify connector type for model-specific compatibility before use.

Read more less

The Qianli multifunctional carbon fiber prying tool is a 0.2mm-thick non-conductive blade for opening and separating electronic devices without scratching surfaces. Its ultra-thin profile and central bulge support controlled leverage in tight seams. Use this tool for smartphone, tablet and small electronics repairs where thin, flexible separation is needed. Technicians and DIYers can slide the blade into gaps, lift adhesives, and separate display assemblies while reducing risk to frames and components. Material: 0.2mm imported carbon fiber — flexible, non-magnetic, skin-friendly Shapes: peanut, business card, hexagonal options for different gap sizes Design: ultra-thin edge with central bulge for grip and controlled force Safety: non-conductive construction to minimize electrical interference Compatibility: fits most modern mobile phones, tablets, and small gadgets Light specifications: 0.2mm thickness; multiple shapes included; weight under 5 g each. Fit statement: Suitable for technicians and hobbyists seeking a thin, flexible prying blade that reduces surface damage during component separation.

Read more less

Introduction: The SUNSHINE Hydrogel Film Screen Scraper Card is a handheld tool for applying hydrogel and thin film screen protectors to phones, tablets, laptops, and cameras. Its rigid edge and ergonomic profile help spread film evenly without scratching the surface. Use case: Use the scraper to smooth film during alignment and to push out trapped air bubbles after placement. Suitable for home installations, quick onsite repairs, or multiple-device setups where consistent pressure and control reduce rework. Material: Eco-friendly, durable scraping surface designed to avoid abrasion on glass and coated displays. Design: Ergonomic grip for controlled, even pressure during application. Compatibility: Works with hydrogel, TPU, and thin PET protectors for smartphones, tablets, laptops, and camera screens. Sizes: Options from 93 x 55 x 2 mm (~7.5 g) to 220 x 65 x 2 mm (~30.6 g) to match small and large devices. Portability: Lightweight and compact for storage in tool kits or pockets. Specifications (light): Thickness 2 mm; weight range 7.5–30.6 g; recyclable material. Fit statement: Choose the scraper size that roughly matches your device width for best control and minimal edge lift.

Read more less

The 4-in-1 Multi-Tool for Cell Phone and Motherboard Repair is a compact hand tool designed for precise electronic work. Its hand-polished high-carbon elastic steel blade and ergonomic handle are built for controlled prying, glue removal, and edge trimming on small components. Use case: technicians and hobbyists can use this tool when separating screens, scraping IC or CPU adhesive, or carefully lifting connectors without applying excessive force. The lightweight design supports extended bench work and reduces hand fatigue during repeated micro‑tasks. Material: hand‑polished high-carbon elastic steel blade with vacuum plating for corrosion and heat resistance Blade qualities: full toughness and rebound to minimize deformation during prying Cutting precision: laser-precision blade edge for controlled work on small parts Handle: universal ergonomic grip for secure handling and tactile control Portability: compact 11.7 x 1.7 cm, lightweight ≈27 g for kit storage Light specifications: approx. 11.7 x 1.7 cm; weight ~27 g; color: metallic finish (vacuum-plated). Fit statement: sized for handheld use and fits standard electronics toolkits; suitable for phone and motherboard repair tasks.

Read more less

Anti-static hard brush for cleaning electronic components — a compact tool for removing dust and debris from motherboards, PCBs, keyboards and small device internals without raising static charge. Use this brush for routine maintenance, repair prep, and delicate cleaning of smartphones, laptops, tablets and small fans. The size and handle allow controlled strokes in tight gaps and around connector pins. Anti-static construction: material reduces electrostatic risk during contact with sensitive components. Firm, fine bristles: capture dust and lint from crevices while allowing precise control on small parts. Compact design: narrow head and short handle reach tight spaces inside devices. Lightweight and durable: reduces hand fatigue for extended tasks and withstands repeated use. Versatile use: suitable for keyboards, fans, PCBs, and phone internals. Specifications (approx.): brush length 160 mm, head width 12 mm, bristle material: anti-static synthetic, color: black/gray. Fit statement: sized for technicians and hobbyists who need a compact, static-safe brush for precise electronics cleaning.

Read more less

This 5-piece set of flat button vibration motors provides compact, low-power haptic drive for small electronic products. The flat shape and light weight suit tight enclosures where space and battery life matter. Use cases include integration into handheld beauty tools (facial cleansers), electric toothbrushes, pet dispensers, motorized toys, and training devices where consistent tactile feedback or vibration-assisted motion is required. Compact size: 10 x 2.7 mm button profile for shallow cavities and PCB-mounted assemblies. Low-voltage operation: Rated 3 V, starting at 2.3 V for battery-powered designs. Energy efficient: Low rated current ~0.8 mA to extend runtime in portable devices. Performance: No-load speed ~12,000 RPM for steady vibration without large torque requirements. Lightweight: Simplifies installation and reduces overall device mass. Specifications (select): 10×2.7 mm, 3 V rated, start 2.3 V, 12,000 RPM no-load, 0.8 mA rated current. Fit statement: These motors are suitable for compact housings designed for 10×2.7 mm components and standard low-voltage electronics; verify cavity depth and mounting method before assembly.

Read more less

The CreationSpace 71-piece multi-functional screwdriver set organizes precision tools for electronics, hobby projects, and light mechanical repairs. Use it to service drones (H-series bits), open phones and tablets (H and T-series), or adjust game controllers (PH-series). The compact case and included pliers and sockets make on-the-go troubleshooting and bench work straightforward. Bit set: 60× 28mm S2 steel bits covering H, T, PH and common precision types for wear resistance. Handle and lever: Ergonomic small screwdriver handle with metal lever for prying and torque control. Additional tools: Seven sockets, precision pliers, and a Type-C charging cable for the handle or electronic accessories. Storage: Compact four-side pop-out case for quick access and organized transport. Compatibility: Suited to drones, smartphones, controllers, laptops, and small appliances using listed bit types. Light specifications: S2 steel bits, 28mm length; 71 total pieces including accessories. Fit statement: The set is compact enough for a toolbox or backpack and designed for handheld use during extended small-part work.

Read more less

The FNIRSI portable adjustable power supply provides compact, configurable DC output for electronics work. It offers adjustable voltage and current, a 2.8-inch HD IPS display with 90° flip, and multiple input options for mobile use. Use it for circuit testing, charging small devices, powering microcontrollers, or temporary benchtop tasks where space and portability matter. Hobbyists and technicians can save presets and switch quickly between setups. Compact size: 10.6 x 7.6 x 2.8 cm, 178 g—suitable for field or bench use. Display: 2.8" HD IPS screen, 90° flip for multi-angle visibility. Input compatibility: PD, QC fast charge, and DC input options. Output range: 0–30 V and 0–5 A with ultra-low ripple (~20 mV). Workflow: Six preset output parameters for quick recalls. Safety: Eight protections including overvoltage and short-circuit safeguards. Light specifications: PC software support for advanced programming and monitoring. Fit statement: Best suited for electronics hobbyists, repair technicians, and prototyping tasks requiring portable, low-noise DC power with preset memory and multiple input options.

Read more less

Replacement back cover adhesive pack for Samsung Z Flip, Fold and compatible Galaxy models. Designed to secure the rear housing to the phone chassis during rear-panel repairs. Use this adhesive when replacing a cracked back glass or separating the rear housing for battery or component repairs. Packaged and inspected before shipping; professional installation is recommended to avoid device damage. Purpose: rear housing adhesive to reattach back cover after repair Compatibility: specified for Samsung Z Flip, Fold and compatible Galaxy series models Condition: inspected prior to shipment for adhesive integrity Installation: peel-and-stick application; heat or alignment tools may be required Packaging: supplied as a replacement adhesive pack for single repair jobs Specifications: adhesive type and exact cut vary by target model; confirm compatibility with your specific device model number before purchase. Fit statement: Intended for rear housing repairs on the listed Samsung series—verify model compatibility and consider professional installation.

Read more less

The iPhone 13 Mini charging port flex cable replacement lets you restore charging and data connection on a damaged device. It’s a direct-fit flex cable ribbon made for the iPhone 13 Mini so you can swap a non-working port for a functioning one. Compatibility: Made specifically for iPhone 13 Mini. Condition: Each unit is checked and shipped in good condition. Performance: Designed to completely fit and work as a replacement part. Installation: Professional installation is highly recommended; seller is not responsible for damage during replacement. Use this charging port flex cable replacement to replace a broken, damaged, or non-working charging port on an iPhone 13 Mini.

Read more less

Restore your Samsung Galaxy S8 screen with this complete LCD and touch digitizer assembly with frame. The compatible SM-G950F 5.7-inch unit replaces a cracked or non-responsive display so you can see and touch your phone normally again. Compatibility Fits Samsung Galaxy S8 SM-G950F, 5.7 inch. Includes LCD display plus touch screen digitizer assembly with frame. Pre-shipment check Each item is inspected before shipping. Installation advice Test before installation by connecting motherboard, audio cable and new screen while phone is apart. Safety tips Use an ESD strap, wear eye protection, and avoid cutting yourself on glass. Handle with care Do not bend the LCD cable over 90° to prevent a black display. This assembly replaces a broken Galaxy S8 display so you can restore the device's screen and touch function.

Read more less