Replacement Parts & Repair Tools

This replacement part restores NFC coil and volume flex cable functions for iPhone 11 Pro Max models. It addresses non-responsive volume buttons and intermittent NFC features such as contactless payments. Use-case: repair shops and experienced DIYers use this assembly to target specific faults without replacing the entire phone. Installing the part can return reliable button actuation and NFC connectivity for daily tasks like calls, audio control, and tap-to-pay. Direct compatibility: Designed for iPhone 11 Pro Max (model-specific fit). Included components: NFC coil and volume flex cable assembly for targeted repair. Inspection: Each unit is checked for continuity and proper connector alignment. Installation note: Professional or experienced technician recommended to avoid damage. Benefit: Restores functionality without full device replacement, reducing waste and cost. Light specifications: connector type and routing match factory layout; small flex ribbon format suitable for internal component bays. Fit statement: Intended only for iPhone 11 Pro Max; verify model number before purchase.

Read more less

This Bluetooth flex cable is a replacement part designed for iPhone 11 models to restore Bluetooth connectivity. It provides a compact, low-profile ribbon assembly intended to align with original mounting points and connectors. Use case: swap this flex cable when an iPhone 11 experiences intermittent pairing, audio dropouts during calls or streaming, or when the device no longer detects Bluetooth accessories. Suitable for DIY repairs by users with basic repair experience or for technicians. Compatibility: Designed to fit iPhone 11 model series and mating connector layout. Function: Restores standard Bluetooth operations once installed. Design: Flexible ribbon assembly for confined device spaces and straightforward routing. Handling: Compact, low-profile part that simplifies replacement steps. Inspection: Supplied after visual/functional checks to minimize defects on arrival. Specifications (light): ribbon flex cable, standard iPhone 11 connector; lightweight and low-profile. Fit: Fits iPhone 11 models; professional or experienced installation recommended to avoid damage.

Read more less

This replacement screen is designed for the iPhone 11 Pro and restores display functions for everyday use. It uses an OLED panel with True Tone and wide color support to match the phone's original viewing characteristics. Use case: replace a cracked or unresponsive display at home to regain visibility for emails, messaging, navigation and media. The pre-installation testing option and flexible cable reduce common DIY errors and let you confirm compatibility before final assembly. Display: 5.8-inch OLED, 2436 × 1125 pixels for sharp text and images Color & Brightness: True Tone, wide color gamut, ~800 nits maximum brightness Design: flex cable engineered for easier alignment and reduced strain Compatibility: fits iPhone 11 Pro models using original connectors Installation: supports pre-installation testing to verify function before full fitment Light specifications: 5.8" size; OLED; 2436×1125 px; 800 nits. Fit statement: Intended for iPhone 11 Pro owners comfortable with DIY screen replacement; follow step-by-step guides and static-safe handling.

Read more less

The iPhone 11 Pro Max back cover assembly is a single-piece replacement designed for routine repairs on the iPhone 11 Pro Max. It combines exterior and internal components to streamline common fixes like cracked glass, unresponsive buttons, or faulty charging. Use cases: suitable for DIY repairers and independent repair shops replacing the rear housing, side keys, or charging assembly. Restores wireless charging and haptic feedback without sourcing multiple parts separately. Complete assembly: rear glass housing with pre-mounted camera lens cover and loudspeaker. Integrated electronics: wireless charging coil and motor (Taptic) included for restored wireless and vibration functions. Button and flex kit: side keys, power button, and volume button flex cable pre-installed for alignment. Charging and I/O: charging port and associated flex included to address power and data issues. Installation-ready: designed as a single unit to reduce install time versus individual parts. Specifications: compatible with iPhone 11 Pro Max models; material: glass rear with metal frame and flex cables; color varies by batch. Fit statement: made to align with iPhone 11 Pro Max chassis and connectors for a secure fit during standard repair procedures.

Read more less

This replacement back cover fits the iPhone 11 and provides a direct option to refresh a worn or damaged rear panel. It is intended for routine exterior maintenance and restores the phone's appearance and handling. Use case: replace a cracked or heavily scratched back after drops or daily wear to regain a cleaner look and better grip during calls, photos, and commuting. Professional installation is recommended to avoid damage during replacement. Model compatibility: designed specifically for iPhone 11 (not compatible with iPhone 11 Pro/Pro Max). Function: replaces damaged rear panel to maintain device structure and support existing camera and button alignments. Fit and finish: molded to match iPhone 11 contours for a seamless replacement. Maintenance benefit: supports routine repairs to extend everyday usability without altering internal components. Inspection: each cover is checked prior to shipping for visible defects. Specifications: compatibility: iPhone 11 only. Fit statement: fits standard iPhone 11 dimensions and original rear assembly locations; professional fit recommended.

Read more less

This replacement LCD display FPC connector is a direct-fit part for iPhone 11 Pro and iPhone 11 Pro Max motherboards. It addresses connector-related screen issues by restoring the physical link between the display flex cable and the logic board. Use case: replace a damaged or non‑functional display connector when your screen is unresponsive, flickering, or shows intermittent touch behavior. Intended for repair technicians or experienced DIYers, the part helps avoid full display or board replacement when the connector is the root cause. Compatibility: iPhone 11 Pro, iPhone 11 Pro Max Material: flexible printed circuit interface with gold‑plated contact pads for reliable conductivity Form factor: designed to match factory connector dimensions for direct replacement Condition: inspected units to ensure physical integrity before shipping Installation: recommended professional or experienced technician installation to avoid damage Specifications (light): connector type – LCD display FPC; color – metallic contacts; fits original board mounting points. Fit statement: designed to align with original mounting holes and cable latch locations on iPhone 11 Pro and 11 Pro Max motherboards for a secure, OEM-style fit.

Read more less

This replacement speaker mesh is designed for routine maintenance of the iPhone 11 Pro. It acts as a barrier against dust and debris to help maintain audio clarity for calls and media playback. Use-case: install the mesh during a speaker repair or as part of scheduled upkeep to reduce particle buildup that can muffle sound. Intended for users repairing a single device or technicians servicing multiple units. Compatibility: specifically fits iPhone 11 Pro models only. Dust protection: acts as a physical barrier to prevent debris entry into the speaker cavity. Exact fit: shaped to match the iPhone 11 Pro speaker opening for a secure placement. Quality checked: each mesh is inspected before dispatch to reduce defects. Installation guidance: professional installation is recommended to avoid damage during replacement. Specifications (light): single replacement mesh, sold individually; intended for rear earpiece speaker maintenance. Fit statement: designed for a direct, form-fit replacement on iPhone 11 Pro units; not compatible with other iPhone models.

Read more less

The iPhone 11 Pro Battery Test Cable for Home Repairs is a replacement flex cable designed to assist with battery diagnostics and minor repairs on iPhone 11 Pro and 11 Pro Max devices. Use this cable to check battery voltage, connector continuity, and basic charge behavior before committing to a full battery replacement. It is intended for users with basic DIY repair skills and standard precision tools. Compatibility: Direct replacement compatible with iPhone 11 Pro and 11 Pro Max motherboard assemblies. Function: Enables accurate battery testing and connector-level diagnosis without powering the full device. Design: Flexible 5-inch flex cable that routes into the device chassis for straightforward installation. Installation: Fits standard home repair toolsets; requires precision screwdrivers and ESD-safe handling. Inspection: Each cable is inspected prior to shipping to confirm connector integrity. Light specifications: approx. 5 in length, thin flex PCB, standard battery connector color: black/gold contacts. Fit statement: Intended to replace the original battery test flex in iPhone 11 Pro / 11 Pro Max; verify model and connector before installation.

Read more less

This replacement back cover fits the iPhone 11 Pro Max and provides a straightforward way to refresh a scratched or damaged rear panel. It restores the phone's exterior look and enables normal handling without exposing internal components. Use case: intended for iPhone 11 Pro Max owners who need a simple, affordable cosmetic repair to address scratches, scuffs, or minor impact marks. Suitable for daily use where basic scratch and dust resistance is required; professional installation is recommended to ensure proper alignment with internal parts. Compatibility: Designed specifically for iPhone 11 Pro Max (not compatible with other iPhone models). Design: Simple finish that blends with the original aesthetics and camera layout. Protection: Helps reduce exposure to minor scratches and dust in routine use. Weight: Lightweight construction for comfortable handling over long periods. Installation: Precision cutouts for camera, buttons, and ports; encourages professional fitting. Use case: Targets cosmetic repair needs without electronics replacement. Specifications: Matches iPhone 11 Pro Max rear dimensions and button/camera cutouts. Fit: Intended to replace the original back cover on iPhone 11 Pro Max only; verify model before purchase.

Read more less

This Incell LCD screen replacement for iPhone 11 is a practical repair part to restore a damaged display and retain everyday functionality. Use it to replace cracked glass or a non-responsive touch panel so you can resume checking email, streaming video, and using apps without replacing the whole phone. 120Hz touch control for smoother, more responsive interactions when scrolling and typing. Original color reproduction with a wide color gamut for accurate visuals and consistent skin tones. High wear resistance to withstand daily handling and reduce visible scratches. Low power consumption designed to limit additional battery drain during routine use. True Tone support adjusts white balance to ambient light for more comfortable viewing. Light specifications: 828 x 1792 resolution, up to 650 cd/m2 brightness, Incell LCD construction, color: black front/display. Fit statement: Compatible with iPhone 11 models only; verify model number before installation. Professional installation recommended if unfamiliar with phone repairs.

Read more less

Essential water damage indicator stickers provide a simple visual check for moisture exposure in iPhone repairs. These self-adhesive sensors reveal contact with water on the motherboard so technicians and DIYers can assess device condition before further work. Use these stickers during diagnostic and routine maintenance to quickly identify likely liquid exposure, reduce time spent on unnecessary part replacements, and document device history. They are intended for inspectors, repair shops, and experienced home repairers handling iPhone 11 Pro and 11 Pro Max units. Precise fit: Cut to sit on motherboard contact points for clear inspection. Easy application: Peel-and-place design requires no tools. Visual indicator: Color change shows moisture contact for straightforward reading. Material: Thin, non-conductive adhesive film to avoid circuit interference. Pack handling: Individually sealed to maintain condition until use. Specifications: approximately 6–10 mm per sticker; flat film material; red/white indicator color; compatible with iPhone 11 Pro and 11 Pro Max motherboards. Fit statement: Intended to match motherboard placement on listed iPhone models—verify alignment before final assembly.

Read more less

Introduction: Foam pads designed to protect speaker and camera openings on the iPhone 11 Pro. These thin, shock-absorbing inserts add localized cushioning without increasing overall device thickness. Use case: For daily handling, commuting, or carrying a phone in a bag, the pads reduce direct contact and friction to vulnerable components. They help prevent surface scratches and absorb light vibrations during routine use while maintaining access to ports and lenses. Compatibility: Made for iPhone 11 Pro speaker and rear camera cutouts. Material: Closed-cell foam with shock-absorbing properties for everyday protection. Design: Thin profile fits under back covers or inside phone cases without lifting. Installation: Adhesive-backed for secure placement; professional installation recommended. Maintenance: Lightweight, non-bulky, and replaceable if worn. Specifications (typical): approximate pad thickness 0.5–1.5 mm; color may vary by batch. Fit statement: Intended to fit standard iPhone 11 Pro internal speaker and camera areas; verify compatibility with aftermarket cases before final installation.

Read more less

The JK Soft OLED Screen is a direct replacement display for the iPhone 11 Pro Max designed to restore visual and touch functionality after damage. Use it for common repair scenarios such as cracked glass, unresponsive touch, or dim/backlight issues. It supports higher refresh responsiveness and adaptive color for everyday tasks like messaging, browsing, and video playback. Compatibility: Designed for iPhone 11 Pro Max (model-specific fit) Display type: OLED panel with True Tone color adaptation Refresh rate: 120Hz for smoother touch response and scrolling Brightness & contrast: ~700 cd/m² brightness; 100,000:1 contrast ratio Power: Lower power consumption to limit additional battery drain Build: Ultra-slim, lightweight assembly for straightforward installation Light specifications: approximate brightness 700 cd/m²; contrast 100,000:1; supports True Tone sensor integration when calibrated. Fit statement: Intended to replace the original iPhone 11 Pro Max screen; test functionality after installation and follow standard repair procedures.

Read more less

This iPhone 11 back cover replacement is a complete rear-assembly designed for routine device maintenance and exterior repairs. It consolidates external and internal components into one unit for straightforward replacement of a cracked or damaged back panel. Use-case: replace a broken back cover to restore housing integrity, re-enable wireless charging, or fix nonresponsive side keys. Suitable for at-home technicians and repair shops handling screen or rear housing service on iPhone 11 models. Complete assembly: back cover with camera lens cover and card tray included. Integrated components: wireless charging module, motor (vibration), and charging port fitted. Controls included: side keys, power button, and volume button flex cable for seamless operation. Audio and connection: loudspeaker and preinstalled flex for stable sound and charging alignment. Installation-ready: fits iPhone 11 chassis dimensions and mounting points. Specifications (light): color varies by listing; material: phone-grade glass and metal frame; compatible with iPhone 11 only. Fit: designed to match iPhone 11 form factor and connector layout; professional installation recommended for full functionality.

Read more less

Replacement microphone module for iPhone 11 Pro, designed to restore call audio and voice recordings when the original microphone is damaged. Use this part to address muffled calls, inconsistent mic pickup, or no audio during recordings. Suitable for technicians and DIY users who want a targeted repair instead of a full device replacement. Model compatibility: specifically for iPhone 11 Pro. Function: primary microphone module for calls, voice memos, and app audio input. Material & form: compact PCB assembly with flex cable, lightweight for ease of handling. Installation: plug-and-play replacement; professional installation recommended to avoid damage. Quality check: units are pre-checked for basic audio function prior to dispatch. Light specifications: flex cable length ~30–40 mm, module dimensions approximate to original OEM footprint, color: black/silver assembly. Fit statement: Intended to fit iPhone 11 Pro only; verify model number before purchase to ensure compatibility.

Read more less

The Infrared FPC flex cable is a direct replacement part for iPhone 11 Pro infrared components. It is intended for users repairing faulty proximity, Face ID-related, or other infrared sensor behaviors without replacing the entire device. Use cases include DIY repairs and technician-level replacements during routine troubleshooting. Installers can swap this lightweight flex cable into an iPhone 11 Pro to target infrared-related malfunctions and restore sensor alignment when connectors and housing are intact. Compatibility: Direct fit for iPhone 11 Pro models (not compatible with other iPhone variants). Material & size: Flexible printed circuit construction, standard OEM-style dimensions for the 11 Pro. Condition: Pre-inspected and supplied ready for installation. Installation: Designed for standard repair workflows; requires basic disassembly tools. Portability: Lightweight and compact for storage or technician kits. Light specifications: FPC flex cable; connector type and pin count match iPhone 11 Pro infrared assembly. Fit statement: Intended to replace the original infrared flex in iPhone 11 Pro units; verify model number before purchase.

Read more less

The iPhone 11 Pro front camera holder is a direct replacement part designed to restore proper alignment and secure positioning of the device's front camera. It is intended for routine maintenance and component replacement on compatible units. Use this holder when the original mounting becomes loose, damaged, or causes misaligned selfies and video calls. It supports at-home maintenance or repair-shop replacement to address recurring blur, focus shifts, or misalignment during virtual meetings and social apps. Compatibility: Designed specifically for iPhone 11 Pro front camera assemblies. Function: Restores camera alignment and secures lens position to reduce image misalignment. Installation: Suitable for replacement during routine repairs; professional installation recommended to avoid incidental damage. Durability: Intended to replace worn or loose holders to maintain original camera functionality. Maintenance benefit: Helps extend usable life of the front camera assembly by enabling targeted part replacement. Light specifications: replacement front camera holder compatible with iPhone 11 Pro; sold as a single unit. Fit statement: Fits iPhone 11 Pro front camera assemblies only; not compatible with other iPhone models.

Read more less

This adhesive strip set is made for front housing repairs on iPhone 11 units, providing a practical sealing solution for screen and frame replacement tasks. Use it when replacing a cracked screen or reseating a damaged bezel; the adhesive aligns with iPhone 11 housing dimensions and works with standard repair tools, suitable for home repairers and technicians. Device compatibility: specifically cut for iPhone 11 front housing dimensions. Material: pressure-sensitive adhesive tape designed for electronics assembly. Color: black adhesive strips to match factory appearance. Application: peel-and-place strips for precise alignment during installation. Inspection: each strip inspected prior to shipping for consistency. Tools: compatible with standard pry tools and alignment frames. Light specifications: pack contains pre-cut strips sized for front housing; thickness ≈0.5–1.0 mm (nominal). Fit statement: Designed to fit iPhone 11 front housing only; confirm model before purchase and follow professional installation guidance.

Read more less

This replacement 3D Touch FPC connector is designed to restore touch responsiveness on iPhone 11 Pro models. It addresses unresponsive screens that result from a damaged connector on the motherboard. Use-case: when taps, pressure-sensitive gestures, or screen navigation fail, replacing this connector can help return normal call, text, and app control. Intended for technicians or experienced DIY users who can perform board-level work. Exact fit: Designed for iPhone 11 Pro motherboard layout and connector placement. Function: Replaces faulty 3D Touch FPC connector to recover touch input and pressure sensing. Condition check: Each unit is inspected prior to sale for correct pins and solder pads. Installation: Board-level replacement; professional or experienced repair recommended. Benefit: Restores daily usability for calls, messaging, and apps without replacing the full display assembly. Specifications (light): copper contacts, black flex connector housing, compatible only with iPhone 11 Pro models. Fit statement: Intended specifically for iPhone 11 Pro; not compatible with other iPhone models.

Read more less

This dustproof mesh is a practical replacement for the microphone and flashlight openings on iPhone 11 series models, designed to limit entry of everyday dust and debris without altering the phone’s appearance. Use it when you work or spend time in dusty environments, during outdoor activities, or to refresh worn or damaged original mesh. Intended as a straightforward maintenance part, it reduces the chance of particle buildup in sensitive areas when installed correctly. Fit: Made to fit iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max openings precisely. Purpose: Covers microphone and flashlight cutouts to block dust and small debris. Design: Low-profile insert that preserves the phone’s original lines and access to ports. Replacement use: For worn, damaged, or missing original mesh components. Installation: Intended for professional or careful DIY installation to avoid device damage. Durability: Pre-checked for condition before shipping to ensure good arrival state. Compatibility: iPhone 11, 11 Pro, 11 Pro Max. Fit statement: Designed for a secure, model-specific fit; confirm model before purchase.

Read more less

This iPhone battery connector is a replacement FPC connector for iPhone 11 series and SE 2022 motherboards. It targets the battery-to-board connection to restore charging continuity when the original connector is damaged. Use-case: replace a worn or damaged battery FPC connector when the device shows intermittent or no charging despite a functioning battery and charger. Intended for experienced DIYers and repair technicians; professional installation is recommended to avoid board damage. Model compatibility: iPhone 11, 11 Pro, 11 Pro Max, SE 2022. Component type: Battery FPC connector for motherboard replacement. Material & finish: metal contacts with insulated plastic housing for soldered board installation. Condition: inspected prior to sale to confirm connector integrity. Installation: requires soldering tools and steady hand; not a plug-and-play cable. Light specifications: single-pin array, standard footprint for listed models, color: black/metal contacts. Fit statement: fits the stated iPhone models only; verify model before purchase.

Read more less

This Essential Kit for Everyday iPhone 11 Repairs and Maintenance supplies replacement screws and bolts sized for standard iPhone 11 assemblies. It is intended for basic DIY maintenance such as tightening loose panels or restoring small internal fastenings. Use case: keep a set in a home toolbox to address common issues—wobbly back panels, loose camera brackets, or missing chassis screws—so you can perform quick adjustments between professional services. Compatibility: designed for iPhone 11 models (not compatible with Pro/Max variants). Contents: assortment of precision M1–M1.4 screws and small bolts common to iPhone 11 assembly. Material: stainless-steel alloy for corrosion resistance and magnetic-tool compatibility. Packaging: compact compartment case with labeled slots for easy selection. Intended users: hobbyists and technicians who perform routine device maintenance. Light specifications: approx. 40 pieces; screw lengths 2–6 mm; weight 18 g. Fit statement: intended to fit standard iPhone 11 internal screw locations; verify part sizes against your device before installation.

Read more less

Replacement parts for iPhone 11 designed for routine home repairs and component swaps. This set includes common inner components such as batteries and LCD screens compatible with iPhone 11 models. Use case: replace a cracked display, swap a degraded battery, or repair a nonresponsive home button during at-home maintenance. Intended for users comfortable with DIY electronics and basic tools; instructions are included for reference. Compatibility: Designed for iPhone 11 (A2111/A2221/A2223) variants. Included parts: OEM-style batteries, LCD touch assemblies, adhesive strips, and basic mounting hardware. Materials: lithium‑ion battery cells, glass/aluminum screen assemblies, and steel/plastic brackets. Fit: Precision-cut connectors and screw placements for direct replacement. Packaging: Parts separated and labeled to simplify step-by-step replacement. Light specifications: battery capacity ~3110 mAh (nominal), display size 6.1" LCD, color options typically match original black, white, or red trim. Fit statement: These parts are intended specifically for iPhone 11 models and may not be compatible with other iPhone generations.

Read more less

This replacement flex cable is for the iPhone 11 earpiece speaker sensor and restores the electrical connection that controls in-ear audio. It addresses muffled or no-sound issues caused by a worn or damaged flex cable. Use case: install during a focused repair to regain clear call audio and proper proximity sensor operation when making calls or watching videos. Intended for technicians and experienced DIYers who need a direct-fit part for everyday device use. Direct replacement: Designed to match the original iPhone 11 earpiece speaker sensor flex cable layout and connectors. Compatibility: Compatible only with standard iPhone 11 models (not Pro or Plus variants). Material: Flexible polyimide substrate with copper traces for signal reliability. Color: Typical black/brown flex cable finish to match internal components. Quality check: Inspected prior to packaging to reduce installation surprises. Specifications: standard length for iPhone 11 board routing; connector type matches OEM pinout. Fit: intended for iPhone 11 internal repairs; professional installation recommended for best results.

Read more less