2UUL 10cc UV Curable Solder Mask is a compact solder mask formulated for targeted electronics repairs. The 10cc dispenser supports multiple small-board repairs and is intended for precise masking of solder joints during component replacement. Use on circuit boards in smartphones, laptops, small appliances and hobby projects to protect adjacent pads and reduce risk of solder bridging. Apply with a fine-tip tool, cure under a UV lamp or sunlight, and trim or remove as needed for rework. Fast cure: visible set in ~30 seconds; recommended 3 minutes for improved adhesion. Volume: 10cc tube suited for repeated small repairs. Compatibility: UV-curable material works with standard UV LEDs or natural sunlight. Application: low-viscosity formula for accurate placement with a needle or syringe. Safety tips: use gloves, eye protection, and work in a well-ventilated area. Specifications: 10cc, UV-curable polymer. No solvents required for initial cure. Fit: suitable for hobbyists and technicians performing board-level rework on small electronics.

Read more less

The Mechanic Ultra-Thin Carbon Steel Repair Blade is a compact precision tool for small repair and craft tasks. Its 0.1 cm thin carbon-steel construction balances stiffness and flexibility for controlled prying and scraping. Use-case: designed for screen removal, frame disassembly, glue and adhesive scraping, light wire trimming, and delicate craft or grafting work. Suited to hobbyists, repair technicians, and anyone doing electronics or small-scale garden grafting where surface protection matters. Material: carbon steel blade for wear resistance and edge retention Thickness: ultra-thin 0.1 cm profile for inserting into tight seams Edge: sharp scraping/cutting edge for clean separations and adhesive removal Size: approximately 3.9 x 2 cm for one-handed control and storage Weight: ~1.5 g to reduce hand fatigue during precise work Specifications (approx.): 3.9 x 2 cm; 0.1 cm thick; 1.5 g; carbon steel; uncoated natural metal finish. Fit: compact size fits standard small repair kits and most hobby tool organizers for immediate access during repairs.

Read more less

The Rear Camera Extension Test Flex Cable is a diagnostic tool for iPhone rear camera repairs, designed to extend the camera connection so technicians can verify functionality without full disassembly. Use it to isolate wiring faults, confirm image capture and focus during repairs, or maintain camera access while replacing nearby components. Suitable for repair benches and mobile technicians testing multiple units. Extends camera wiring for easier access during diagnostics and reassembly checks. Durable flex design tolerates repeated connect/disconnect cycles in workshop use. Standard connector interface matches original camera flex connections for straightforward testing. Quick fault isolation helps identify loose contacts and intermittent signals without removing the full assembly. Portable and compact for inclusion in repair kits and on-site service bags. Light specifications: flexible ribbon cable with reinforced connector; typical length for bench access; color and exact pinout vary by model. Fit: compatible with various iPhone rear camera assemblies—verify connector type for model-specific compatibility before use.

Read more less

The Qianli multifunctional carbon fiber prying tool is a 0.2mm-thick non-conductive blade for opening and separating electronic devices without scratching surfaces. Its ultra-thin profile and central bulge support controlled leverage in tight seams. Use this tool for smartphone, tablet and small electronics repairs where thin, flexible separation is needed. Technicians and DIYers can slide the blade into gaps, lift adhesives, and separate display assemblies while reducing risk to frames and components. Material: 0.2mm imported carbon fiber — flexible, non-magnetic, skin-friendly Shapes: peanut, business card, hexagonal options for different gap sizes Design: ultra-thin edge with central bulge for grip and controlled force Safety: non-conductive construction to minimize electrical interference Compatibility: fits most modern mobile phones, tablets, and small gadgets Light specifications: 0.2mm thickness; multiple shapes included; weight under 5 g each. Fit statement: Suitable for technicians and hobbyists seeking a thin, flexible prying blade that reduces surface damage during component separation.

Read more less

Introduction: The SUNSHINE Hydrogel Film Screen Scraper Card is a handheld tool for applying hydrogel and thin film screen protectors to phones, tablets, laptops, and cameras. Its rigid edge and ergonomic profile help spread film evenly without scratching the surface. Use case: Use the scraper to smooth film during alignment and to push out trapped air bubbles after placement. Suitable for home installations, quick onsite repairs, or multiple-device setups where consistent pressure and control reduce rework. Material: Eco-friendly, durable scraping surface designed to avoid abrasion on glass and coated displays. Design: Ergonomic grip for controlled, even pressure during application. Compatibility: Works with hydrogel, TPU, and thin PET protectors for smartphones, tablets, laptops, and camera screens. Sizes: Options from 93 x 55 x 2 mm (~7.5 g) to 220 x 65 x 2 mm (~30.6 g) to match small and large devices. Portability: Lightweight and compact for storage in tool kits or pockets. Specifications (light): Thickness 2 mm; weight range 7.5–30.6 g; recyclable material. Fit statement: Choose the scraper size that roughly matches your device width for best control and minimal edge lift.

Read more less

The 4-in-1 Multi-Tool for Cell Phone and Motherboard Repair is a compact hand tool designed for precise electronic work. Its hand-polished high-carbon elastic steel blade and ergonomic handle are built for controlled prying, glue removal, and edge trimming on small components. Use case: technicians and hobbyists can use this tool when separating screens, scraping IC or CPU adhesive, or carefully lifting connectors without applying excessive force. The lightweight design supports extended bench work and reduces hand fatigue during repeated micro‑tasks. Material: hand‑polished high-carbon elastic steel blade with vacuum plating for corrosion and heat resistance Blade qualities: full toughness and rebound to minimize deformation during prying Cutting precision: laser-precision blade edge for controlled work on small parts Handle: universal ergonomic grip for secure handling and tactile control Portability: compact 11.7 x 1.7 cm, lightweight ≈27 g for kit storage Light specifications: approx. 11.7 x 1.7 cm; weight ~27 g; color: metallic finish (vacuum-plated). Fit statement: sized for handheld use and fits standard electronics toolkits; suitable for phone and motherboard repair tasks.

Read more less

Anti-static hard brush for cleaning electronic components — a compact tool for removing dust and debris from motherboards, PCBs, keyboards and small device internals without raising static charge. Use this brush for routine maintenance, repair prep, and delicate cleaning of smartphones, laptops, tablets and small fans. The size and handle allow controlled strokes in tight gaps and around connector pins. Anti-static construction: material reduces electrostatic risk during contact with sensitive components. Firm, fine bristles: capture dust and lint from crevices while allowing precise control on small parts. Compact design: narrow head and short handle reach tight spaces inside devices. Lightweight and durable: reduces hand fatigue for extended tasks and withstands repeated use. Versatile use: suitable for keyboards, fans, PCBs, and phone internals. Specifications (approx.): brush length 160 mm, head width 12 mm, bristle material: anti-static synthetic, color: black/gray. Fit statement: sized for technicians and hobbyists who need a compact, static-safe brush for precise electronics cleaning.

Read more less

This 5-piece set of flat button vibration motors provides compact, low-power haptic drive for small electronic products. The flat shape and light weight suit tight enclosures where space and battery life matter. Use cases include integration into handheld beauty tools (facial cleansers), electric toothbrushes, pet dispensers, motorized toys, and training devices where consistent tactile feedback or vibration-assisted motion is required. Compact size: 10 x 2.7 mm button profile for shallow cavities and PCB-mounted assemblies. Low-voltage operation: Rated 3 V, starting at 2.3 V for battery-powered designs. Energy efficient: Low rated current ~0.8 mA to extend runtime in portable devices. Performance: No-load speed ~12,000 RPM for steady vibration without large torque requirements. Lightweight: Simplifies installation and reduces overall device mass. Specifications (select): 10×2.7 mm, 3 V rated, start 2.3 V, 12,000 RPM no-load, 0.8 mA rated current. Fit statement: These motors are suitable for compact housings designed for 10×2.7 mm components and standard low-voltage electronics; verify cavity depth and mounting method before assembly.

Read more less

The CreationSpace 71-piece multi-functional screwdriver set organizes precision tools for electronics, hobby projects, and light mechanical repairs. Use it to service drones (H-series bits), open phones and tablets (H and T-series), or adjust game controllers (PH-series). The compact case and included pliers and sockets make on-the-go troubleshooting and bench work straightforward. Bit set: 60× 28mm S2 steel bits covering H, T, PH and common precision types for wear resistance. Handle and lever: Ergonomic small screwdriver handle with metal lever for prying and torque control. Additional tools: Seven sockets, precision pliers, and a Type-C charging cable for the handle or electronic accessories. Storage: Compact four-side pop-out case for quick access and organized transport. Compatibility: Suited to drones, smartphones, controllers, laptops, and small appliances using listed bit types. Light specifications: S2 steel bits, 28mm length; 71 total pieces including accessories. Fit statement: The set is compact enough for a toolbox or backpack and designed for handheld use during extended small-part work.

Read more less

The FNIRSI portable adjustable power supply provides compact, configurable DC output for electronics work. It offers adjustable voltage and current, a 2.8-inch HD IPS display with 90° flip, and multiple input options for mobile use. Use it for circuit testing, charging small devices, powering microcontrollers, or temporary benchtop tasks where space and portability matter. Hobbyists and technicians can save presets and switch quickly between setups. Compact size: 10.6 x 7.6 x 2.8 cm, 178 g—suitable for field or bench use. Display: 2.8" HD IPS screen, 90° flip for multi-angle visibility. Input compatibility: PD, QC fast charge, and DC input options. Output range: 0–30 V and 0–5 A with ultra-low ripple (~20 mV). Workflow: Six preset output parameters for quick recalls. Safety: Eight protections including overvoltage and short-circuit safeguards. Light specifications: PC software support for advanced programming and monitoring. Fit statement: Best suited for electronics hobbyists, repair technicians, and prototyping tasks requiring portable, low-noise DC power with preset memory and multiple input options.

Read more less

Replacement home button flex cable assembly for Samsung Galaxy S6 Edge (model G925). This part includes the integrated fingerprint sensor and button housing to restore touch and fingerprint input when the original component is damaged. Intended for repair of a broken or non-responsive home button; suitable for technicians and experienced DIYers. Each unit is checked for basic functionality prior to dispatch. Professional installation is recommended to avoid damage to the display or internal components. Compatibility: Samsung Galaxy S6 Edge (G925) series. Includes: home button, flex cable, integrated fingerprint sensor. Color/Finish: original-style button finish to match common S6 Edge assemblies. Material: flex cable with metal/plastic button components (standard repair-grade parts). Installation: requires disassembly of the screen; recommend use of heat and proper tools. Specifications: direct-fit replacement for G925 variants; not guaranteed to retain OEM pairing if original motherboard security settings differ. Fit statement: fits Samsung Galaxy S6 Edge models (G925). Verify model number before purchase.

Read more less

Replacement back cover adhesive pack for Samsung Z Flip, Fold and compatible Galaxy models. Designed to secure the rear housing to the phone chassis during rear-panel repairs. Use this adhesive when replacing a cracked back glass or separating the rear housing for battery or component repairs. Packaged and inspected before shipping; professional installation is recommended to avoid device damage. Purpose: rear housing adhesive to reattach back cover after repair Compatibility: specified for Samsung Z Flip, Fold and compatible Galaxy series models Condition: inspected prior to shipment for adhesive integrity Installation: peel-and-stick application; heat or alignment tools may be required Packaging: supplied as a replacement adhesive pack for single repair jobs Specifications: adhesive type and exact cut vary by target model; confirm compatibility with your specific device model number before purchase. Fit statement: Intended for rear housing repairs on the listed Samsung series—verify model compatibility and consider professional installation.

Read more less