Shop All

Car Solar LED Warning Light for Night Security – Blue. This solar-powered unit uses an intelligent day/night sensor to charge by day and activate at night, providing a clear signal for vehicle visibility without wiring. Designed for parked cars, delivery fleets, and outdoor setups, it signals after dark. The switch-enabled sensor turns on automatically when ambient light falls and will flash if lighting is insufficient. Solar powered with an 80 mAh rechargeable battery for daytime charging. On/Off switch and automatic light sensing for hands-free operation. Light color options: blue or red. Size: 5 x 2 x 1.3 cm; compact for easy mounting. Flash rate: automatic flash every 5 seconds in low light. Light specifications: Blue LED, 80 mAh battery, solar charging. Fit: Designed to mount on flat or gently curved exterior surfaces of most cars, requiring no wiring for installation.

Read more less

The Car Turbine High Wind USB Plug-In Seat Back Fan is a compact, 5V USB-powered fan designed for rear-seat cooling. Its durable ABS housing keeps weight low while providing steady airflow on long trips. When the car heats up, it directs airflow toward passengers to reduce muggy cabin conditions. Material: ABS housing for durability Power & port: 5V USB-C input, 2A; USB interface compatible with most car models Mounting: Peel-and-stick attachment for easy placement and removal Airflow: Adjustable outlet angle up and down Size & weight: 175 × 75 × 34 mm; 119 g Included: 1.5 m Type-C cable and instruction manual Specifications: Material ABS; Size 175×75×34 mm; Weight 119 g; Cable: 1.5 m Type-C included. Fit: Suitable for most cars with a USB power source via Type-C; attaches to the seat back with adhesive for quick removal when not needed.

Read more less

The Car Three-Head Fan delivers portable cooling for on-the-go use. Its three rotating heads provide flexible airflow across the cabin while traveling or parked. Useful on hot days, during road trips, or while waiting in the car. It helps direct air where needed without running the vehicle climate control. Three independently adjustable heads with 360-degree horizontal rotation and 180-degree vertical tilt for precise airflow. Compatible with 5V, 12V, or 24V power sources and can run from cigarette lighter or USB. Quiet operation with low noise, plus fast heat dissipation and a safety mesh cover. Two wind speed levels allow easy, precise adjustment for different environments. Built-in aromatherapy box lets you add scents for a optional, subtle fragrance. Back panel provides a place to display a parking number plate with large numerals. Specifications: Material: PP; Size: about 30.2 x 9.8 x 13.5 cm; Cable length: about 130 cm; Power interface: Cigarette lighter / USB; Power: 15W; Voltage: 5V / 12V / 24V. Fit: Best suited for cars, SUVs, trucks, and vans with standard 12V or USB power.

Read more less

Car Transmission Oil Cooling Fan with Mounting Kit provides a practical option to improve transmission oil cooling by adding a dedicated airflow path through the radiator. It is designed for straightforward installation and reliable operation in everyday vehicle setups. Ideal for maintenance or performance-minded setups where transmission heat is a concern, especially in hot climates or during towing where oil temps rise. Includes mounting kit for straightforward installation on compatible radiators. Material: ABS with heat-resistant construction for durability. Provides a bypass cooling path to route transmission oil through the radiator. Designed for easy integration with standard automotive radiators. Helps monitor and manage transmission oil temperature during demanding driving conditions. Specifications: Material: ABS; Mounting kit included; Heat-resistant design. Fit: Designed to fit most standard automotive radiators with compatible mounting points.

Read more less

Designed for LED upgrades, this 10-pack Car T10 Bulb Base Retainer Holder Adapter provides a secure, compatible mounting for T10 bulb replacements. The adapters combine ABS plastic and metal for reliable strength and durability. When upgrading from traditional bulbs to LED T10 bulbs, these retainers prevent loose connections and rattle. Install once, and the lamp stays aligned in housings that otherwise struggle to accept LED replacements. Material: ABS plastic + metal construction for durability Compatibility: fits standard T10 bulb bases across general vehicle models Secure fit: design grips the lamp base and adapter to prevent loosening Easy installation: snap-in design, no tools required Pack contents: includes 10 adapters; weight about 15 g each Light specs: Weight ~15 g per adapter; color or finish not specified. Fit: Suitable for general models with T10 socket bases. Check your vehicle's bulb holder and cable routing to confirm clearance and fit.

Read more less

Car Taillight Mounting Clip for Mitsubishi Pajero and Montero provides a plastic, OEM-matched fastener to restore secure taillight mounting. It uses OE MU0006133 and serves as a direct replacement for select Pajero and Montero models, ensuring proper alignment and sealing of the tail assembly. Use this clip when a damaged or missing mount prevents a proper taillight fit. The part is designed for quick, uncomplicated installation and to reestablish reliable mounting for the tail light housing. Material: durable plastic OE number MU0006133 Compatibility: Mitsubishi Pajero V73W, V77W, V93W, V97W, V98W, K96W; Montero 2001–2006 Gen3 3.5L V6 and 3.8L V6 Direct replacement: swaps the original clip without modification Installation: quick and straightforward Fit: Please confirm your Pajero/Montero model is listed above before purchasing to ensure compatibility.

Read more less

The Car Seat Armrest Cup Holder With Rear-Seat Charging Storage adds a padded armrest surface and convenient rear storage to your vehicle. Note: only the product box is included; no additional items are provided. Ideal for families, rideshares, or daily commutes, this accessory keeps cups, cables, and small items within reach for rear passengers. Napa-pattern leather top with rebound sponge provides a soft touch and durable seating surface. Built-in dual USB charging port supports two devices at once. Large capacity interior keeps cups, cables, and small items organized. Adjustable lifting track lets you raise or lower the armrest to fit different vehicle models. Tight stitching and neat seams resist unraveling for a clean, long-lasting appearance. Materials: napa-pattern leather, rebound sponge, fiber velvet fabric. Color and finish may vary by model. Compatibility and fit: The height-adjustable lifting track accommodates different vehicle models and rear-seat configurations, helping the armrest align with the seat and cup holder openings.

Read more less

Direct replacement left trunk spring support rod for BMW 5 Series. OE part 512472043665 ensures correct alignment with the original mounting points. Designed for BMW 5 Series F10/F18 from 2011 to 2016, including 528i, 535i, 550i, and ActiveHybrid 5 variants. Not compatible with cars equipped with an automatic trunk lid. Direct replacement with identical mounting points for a seamless install, preserving factory alignment and trunk operation. Left-side trunk support rod for BMW 5 Series F10/F18 (2011–2016), compatible with listed trims. Anti-oxidation coating provides durable corrosion resistance in varied climates and wash conditions. No drilling or modifications required; uses existing mounting holes and fasteners for a clean fit. Easy installation with common hand tools and straightforward steps, reducing downtime. OE part number 512472043665 helps you confirm correct match during replacement. Fit: Left trunk side for BMW 5 Series F10/F18 (2011–2016). Verify your model excludes an automatic trunk lid before installation.

Read more less

Direct replacement trunk right spring support rod for BMW 5 Series F10/F18. Designed to mirror the factory fit, it installs in place of the original lifting bracket without drilling, restoring reliable lid action. Use this part when the trunk lid won’t stay open, opens with difficulty, or requires extra effort to close. It provides a stable assist for smooth, one-handed operation and safer lid movement. OE part number 512472043675 for precise identification Metal construction with anti-oxidation coating for durability Direct replacement that aligns with the original mounting hole Right-side orientation for BMW 5 Series trunk lid No drilling or modification required during installation Compatible with 2011–2016 BMW 5 Series models (excluding automatic trunk lids) Fit: BMW 5 Series F10/F18 (2011–2016), right trunk lid. Not compatible with vehicles equipped with Automatic Trunk Lid.

Read more less

This aluminum thermostat housing water pump outlet is designed as a direct replacement for certain GM vehicles. It features rust-resistant aluminum and a precise fit to support cooling system reliability. When the factory housing leaks or wears, this replacement helps maintain coolant flow and steady engine temperature between services. Aluminum alloy construction for rust resistance and durability OE references 55593034 and 555790105 for accurate compatibility Fits Chevrolet Cruze, Aveo, Sonic; Buick Encore; Opel Ast Built to strict quality control standards for stable performance Direct replacement for worn housings with long service life Specifications: Material—aluminum alloy. OE numbers included above. Fit: Direct replacement for the listed vehicles; verify year and trim for correct cooling system fit.

Read more less

A side-mounted car storage box that doubles as a compact trash can. It combines a durable microfiber leather exterior with an ABS interior for everyday use. Ideal for daily commutes, road trips, and rideshare driving, it keeps receipts, wrappers, tissues, and small personal items within reach and away from main surfaces. Material and dimensions: Microfiber leather exterior with ABS interior; 18.5 × 15.5 × 4.5 cm. Clip-on installation: Detachable back clip; attaches to door panels or seat backs for quick setup. Power and lighting: Built-in 110 mAh lithium battery; Type-C charging; supports continuous illumination. Touch illumination: Touch-activated light with a sensor area; red indicates low power, green indicates full charge. Storage function: Stores personal items and small trash for convenient access during trips. Compatibility: Designed to fit inside most car interiors where side-mounted storage is practical. Light specifications — Touch-activated illumination powered by a 110 mAh battery; Type-C charging; color indicators show power status (red = low, green = full). Fit: Clips to the inside of car doors or seat backs and is suitable for most standard vehicle interiors.

Read more less

Protect and refresh your car interior with a non-slip perforated cushion set for front, rear, and back seats. Crafted in Nappa leather with breathable perforations, these cushions provide comfortable support while preserving seat function. Ideal for daily commutes, family trips, or rides with multiple passengers where seat protection and stable seating matter. Installation is quick and tool-free, and the cushions do not interfere with seatbelt buckles. Plum blossom buckle fastening; no drilling required. Silicone anti-slip particles on the back keep cushions secure without seat damage. Nappa leather surface is flexible and scratch-resistant; perforated for breathability. Adjustable high-elastic straps with buckles secure the cushions to the backrest; compatible with most vehicle models. Covers front, back, and rear seats; all-season use. Designed to minimize interference with vehicle functions. Sizes and weights: Back cushion 76.5 x 43 x 3.5 cm (≈350 g); Front cushion 46 x 46 x 3.5 cm (≈300 g); Rear cushion 48 x 126 x 3.5 cm (≈850 g). Fit: Adjustable straps and universal design aim to fit 99% of car models.

Read more less

This Car Seat Cushion set adds targeted comfort to front, back, and rear seats with a secure, non-slip design. Ideal for daily commutes, family trips, or rides with kids and pets. The cushions protect upholstery while providing supportive padding where you sit most. Plum blossom buckle fastening allows tool-free installation No drilling required and it does not affect seatbelt buckles Nappa leather surface offers flexibility and scratch resistance Silicone anti-slip particles on the back keep cushions in place Adjustable high-elastic straps with buckles for the backrest, fitting most cars All-season design for year-round use Specs: Back cushion 76.5 × 43 × 3.5 cm; front seat cushion 46 × 46 × 3.5 cm; rear seat cushion 48 × 126 × 3.5 cm. Weights: front 300 g; back 350 g; rear 850 g. Fit: designed to fit about 99% of vehicle models.

Read more less

This steering wheel clock spring with angle sensor is designed as an OE-standard replacement for select Dodge and Jeep models. Use it to replace a worn or failed clock spring that affects steering controls and horn function, restoring reliability without altering vehicle electronics. OE part number 5156106AD for reference Material: plastic, lightweight yet durable Angle sensor provides accurate steering-wheel position data Restores steering controls and horn with stable performance Easy installation with direct fit for the listed vehicles Wide compatibility: Jeep Compass, Grand Cherokee III, Commander, Wrangler III, Cherokee, and several Dodge variants Light specifications: integrates with standard 12V electrical systems and typical vehicle CAN setups. Fit: Replaces worn clock springs in compatible Jeep and Dodge models; confirm year and engine compatibility with the listed applications.

Read more less

The Car Sun Visor Glasses Holder provides a practical, low-profile way to store eyewear in the car. Made from suede with a zinc alloy frame, it offers durability without bulk. Use it to keep sunglasses or reading glasses within easy reach during drives, while protecting lenses from scratches when entering or leaving the vehicle. The snap-on mechanism opens with a light press and keeps glasses secure on rough roads. Snap-on design opens with a press, keeping glasses secure on rough roads. Suede exterior with a zinc alloy frame for durability. Mounts to the sun visor for quick, unobtrusive access. Built-in sponge cushions protect lenses from minor impacts. Compact size: 9 x 4.5 x 4.2 cm, low profile. Compatible with most standard car visors and common eyewear. Specifications: Dimensions 9 x 4.5 x 4.2 cm; Material: suede and zinc alloy; Mounting location: sun visor. Fit: Designed for standard car sun visors to provide quick, unobtrusive access to eyewear.

Read more less

Car Tablet and Phone Holder for 6 to 15 Inch Devices offers a secure, versatile mount for smartphones and tablets in the car. Made from ABS with soft silicone padding, it protects devices and provides anti-slip stability. Ideal for in-vehicle navigation or streaming, the mount keeps the device within easy reach without blocking sight lines. It supports both horizontal and vertical orientations for map displays or media viewing, enhancing usability on the road. Material: ABS with silicone padding Anti-slip design to prevent scratches and enhance grip Grid glue pads distribute stress and reduce vibration Clamp range supports 7–15-inch devices, phones and tablets Supports horizontal and vertical orientations Shockproof mounting for stability on rough roads Concealed installation on dash or air vent to save space Specifications: Clamp range 7–15 inches; mounting options include dashboard surface or air vent. Fit: Concealed installation on the instrument panel or air outlet to save space.

Read more less

The Car Seat Back Hanger Hook provides a simple, practical backseat storage solution. Made from PU, it adds space by letting you hang bags, backpacks, clothing, and other daily items behind the seat. On everyday drives, loose items can shift and clutter the cabin. This hook prevents items from rolling into the footwell, helping keep the interior organized and reducing distractions while driving. Durable PU construction supports larger items Quick, tool-free installation by hanging on the back of the seat Increases backseat storage for bags, backpacks, jackets, and groceries Keeps items from rolling around and away from the driver's area during drives Slim, unobtrusive design preserves interior aesthetics Compatible with most vehicle interiors; attaches behind the seat without modifications Specifications: Material — PU. Installation — tool-free. Fit: Designed to hook onto the back of the rear seat in most cars, providing accessible storage without obstructing visibility.

Read more less

The Car Sun Visor Card Extension Clip provides adjustable glare protection for drivers. It blocks strong sunlight while keeping the driving view clear. The suede finish adds a subtle, practical touch to the cabin. Use it during dawn or late-afternoon drives when glare is most intense. The length is adjustable to match driver height, helping reduce eye strain. Blocks strong sunlight and reduces glare for clearer visibility Design keeps the driving view unobstructed, even at edge angles Adjustable length to match driver height and seating position Suede material is wear-resistant and durable under daily use Metal buckle enables simple installation and stable, secure fit Size 38 x 11.8 cm; compatible with most vehicles Fit: Designed to work with most cars that use standard sun visors.

Read more less

This Car Underseat Vent Protection Cover is designed for Tesla Model Y and Model 3. Made from ABS, it adds a protective layer over under-seat vent openings while preserving airflow. In daily use, it keeps dust, debris and small objects from entering vents, while the skeletonized design ensures the vent outlet remains unobstructed. ABS material provides anti-scratch, wear-resistant protection with good impact resistance. One-piece molding yields a firm, seamless shield over the vent area. Skeletonized design keeps the vent open, preserving normal airflow. Snap-in installation allows quick, tool-free fitting without modifying the vehicle. Original car molding geometry ensures curvature close to standard Tesla interior. Blocks debris and foreign objects while not restricting air intake or exhaust. Care and maintenance: washable, odor-free after cleaning. Optional light specifications: Material: ABS. Color: not specified. Fit: Designed to align with the under-seat vent openings of Tesla Model Y and Model 3, with snap-in placement for a secure, near-factory look.

Read more less

This rubber dust cover for the car steering ball offers a practical, installation-friendly solution. It uses a tongue-and-groove fastening system, with no dismantling required for fitment. Use this cover to protect the steering ball area from dust, moisture, and routine wear during daily driving or maintenance. Tongue and groove fastening system for a precise, secure fit No dismantling required, reducing time and effort Durable rubber construction resists wear and environmental exposure Size: 95 x 130 mm matches standard steering ball dust covers Protects the steering ball joint from dust, moisture, and grime Light specifications: Size 95 × 130 mm; material rubber. Fit: Designed to fit steering ball dust covers with dimensions 95 x 130 mm. Check your part measurements before installation.

Read more less

The Car Seat Seam Storage Box is a compact organizer designed to sit in the gap between the car seat and the center console. It provides a practical storage surface without requiring tools or permanent modifications. Use it to keep everyday items within reach: coins, keys, charging cables, small gloves, or parking passes stay neatly in the seam as you drive. Material: durable plastic with EVA cushion inside for anti-vibration. Size: 26.5 x 4.5 x 16.6 cm. Weight: approx 350 g. Installation: plug-and-play, non-destructive; bottom bracket detachable for left or right side mounting. Positioning: elastic design fills the seat gap and seals the seam against the center console. Compatibility: universal fit for most cars as an in-seat gap organizer. SpecificationsMaterial: plastic; Internal cushion: EVA; Weight: approx 350 g; Dimensions: 26.5 × 4.5 × 16.6 cm. Fit: Designed to sit flush in the seat gap without interfering with seat adjustment or belt routing; suitable for driver or passenger side use.

Read more less

Car Universal Battery Bracket With Adjustable Base Tray provides a practical mounting solution for a variety of automotive batteries. The design emphasizes adjustable fit, straightforward installation, and stable support in everyday use. Ideal for battery replacement projects, DIY installations, or temporary setups where a secure, level tray helps prevent movement and vibration. Adjustable width to fit a wide range of battery sizes, from compact to mid-size automotive batteries Compact, portable design for easy handling and storage in tight engine bays Simple installation with standard mounting points and straightforward securing methods Durable frame built to withstand regular vibration and road conditions Practical base tray keeps the battery level and stable during operation Broad compatibility with most common automotive battery sizes and layouts Fit: designed to fit a broad range of vehicles thanks to the adjustable base width.

Read more less

Car Slice Fuse Holder for Fuse Box, 10-pack set designed for everyday automotive use in 24V systems. Each unit accepts standard fuses up to 30A and features durable copper contacts for reliable connections. Ideal for maintenance, roadside repairs, and DIY electrical projects in cars, trucks, and equipment with 24V power. The two-hole wiring harness is waterproof and dustproof, with copper pins and seals that resist corrosion and moisture. Current rating: 30A at 24V Two-hole wiring harness with waterproof and dustproof seals All-copper pins, copper coil, and thickened copper inserts with locking feet Direct fuse pin socket for quick plugging and replacement High-temperature nylon storage box with slow-melting safety film Wire length about 20 cm; compact routing and easy mounting Specifications: Wire length ~20 cm per unit; 24V operation; 30A max per fuse holder. Pack: 10 units in a set. Fit: Compatible with standard automotive fuse boxes and blade-type fuses rated for 30A; check your vehicle's fuse layout before installation.

Read more less

Car Square Push Button Switch with Lock and LED Indicator in Red is a compact, panel-mount on/off switch designed for 24V DC vehicle circuits. It includes a built-in LED indicator and a locking feature to prevent accidental actuation. Ideal for aftermarket vehicle projects such as auxiliary power controls, custom dashboards, or secure power switching for accessories. Voltage and current: DC 24V, 5A max. Red LED indicator shows ON status. Locking mechanism helps prevent unintended presses. Square, panel-mount design for straightforward wiring and mounting. Suitable for 24V DC vehicle circuits and DIY installations. Light specifications: Red LED indicator lights when the switch is ON and is powered by a 24V DC supply. Fit and compatibility: Designed for 24V DC vehicle systems and compatible with typical dashboard panels and accessory wiring. Verify panel cutout and wiring before installation.

Read more less