Tools & Gadgets

Right Angle Laser Level for tiling and home projects. Built with an alloy steel body for durability and precise alignment. This handheld tool projects two perpendicular laser lines for accurate 90-degree layouts, supporting tiles, floors, paneling, wallpapering, stenciling, and finish carpentry. Generates two 90-degree laser lines for clear corner alignment Compact size of 195 x 95 x 50 mm and weight 220 g for easy handling Red laser (630–670 nm) with visibility up to 16 m in optimal conditions Accuracy of ±1 mm at 3 m for reliable DIY results Runs on 3 AAA 1.5 V batteries (not included) Durable alloy steel body with sturdy internal components, compatible with standard DIY layouts Light specifications: Red laser, 630–670 nm; visibility up to 16 m. Range and accuracy are rated at typical indoor conditions. Fit: Suitable for standard home DIY tiling, flooring, wall finishing, paneling, and carpentry projects.

Read more less

The 2-in-1 Hot Air Rework Station and Soldering Iron offers compact, straightforward electronics repair capability. This system blends a hot-air gun with a soldering station for precise component removal and soldering tasks. Ideal for surface-mount device work, board repair, and small electronics projects where both hot air and direct soldering are needed. 2-in-1 design: hot air rework gun plus soldering iron in one compact unit. PID control with a 200–480°C range and ±2°C stability. LED digital display, button adjustments, and a temperature lock for repeatable temps. AC 26V±10%, 40W, rapid heat-up and controlled airflow for desoldering. Safety: low-voltage soldering element; tip BST900M-T-I; tip-to-ground impedance <2 Ω; tip-to-ground voltage <2 mV. Four-core ceramic heater provides steady, consistent heating. Specifications: Operating voltage AC 26V±10% 50Hz; Output power 40W±10%; Temperature range 200–480°C; Temperature stability ±2°C (static state); Display: LED digital; Tip-to-ground impedance <2 Ω; Tip-to-ground voltage <2 mV. Fit: Designed for compact workspaces; suitable for home workshops, schools, and professional repair benches.

Read more less

Compact stainless steel angle gauge for checking screw thread cutting angles on metal lathes. Designed for precise verification of tool edge angles before threading. Ideal for machinists and hobbyists who machine screws or taps. Use the V-slots to confirm the angle of the cutting tool before each pass. Angles: 29°, 30°, 40°, 45°, 50°, 55°, 60°, 65° — a quick reference during setup. Material: Stainless steel, durable and corrosion resistant. Size: 35 mm × 20 mm × 2 mm; Color: Silver. Application: Checks tool angle while threading on metal turning lathes using the V slots. Compatibility: Works with standard screw-thread cutting tools and common threading setups. Notes: The color in photos may vary slightly due to lighting; measurement tolerance is ±1–3 cm. Optional light specifications: Compact, pocket-friendly dimensions support easy handling in tight spaces. Fit: Designed to work with standard screw-thread cutting tools on metal turning lathes.

Read more less

Magnetic Welding Positioner Triangular Holder, 75 Lb. Built from steel with a strong magnetic base, this holder offers hands-free positioning for welding tasks. Ideal for plane welding and low-altitude fixed workpieces, it secures parts at three points to reduce setup time and improve consistency. Capacity: holds up to 75 lb (34 kg) for stable fixtures. Construction: steel body with a powerful magnet for reliable, vibration-resistant clamping. Dimensions and weight: 122 x 25 x 20.4 mm; 1,014 g. Triangular design provides three-point contact for stable alignment. Compatibility: suitable for flat welds and simple fixtures on standard welding tables. Safety and operation: hands-free use reduces operator fatigue. Specifications: Model 75 lbs; dimensions 122 x 25 x 20.4 mm; weight 1,014 g; material steel; magnet strength strong. Fit: Designed to work with standard welding fixtures and tables that accommodate magnetic holders.

Read more less

This 100 ml push-down liquid container blends stainless steel and plastic for durability. The white bottle features scale marks at 50 ml and 100 ml for quick measurement. Ideal for nail art, makeup, and related applications, it also suits alcohol, solvents, and cleaning liquids in beauty, studio, or workshop settings. The push-down pump provides controlled dispensing, while a positive-seal cap helps minimize evaporation and leaks. Capacity: 100 ml with dual scale marks at 50 ml and 100 ml Materials: stainless steel components with a durable plastic body Color: white exterior with a secure, user-friendly pump Dispensing and seal: push-down pump plus positive-seal cap to minimize evaporation and leaks Compatibility: suitable for alcohol, chemical solvents, nail-art liquids, and makeup products Hardware compatibility: fits standard 100 ml pump dispensers and refill bottles Refill and maintenance: refillable design for repeated use in beauty or industrial settings Light specifications: 100 ml capacity, dual scale marks (50 ml/100 ml), white color, stainless steel + plastic construction. Fit: Compatible with standard 100 ml pump dispensers and common refill bottles used in salons and beauty studios.

Read more less

A compact, anti-scald soldering tool designed for precise circuit repair. Ideal for technicians and electronics hobbyists who remove or reflow solder on PCBs, ICs, and tiny components. Copper braided wire provides efficient solder absorption (solder wick). Wire lengths include 1.5/2.0/2.5 mm x 2 m and 3.0/3.5 mm x 1.5 m. Stainless steel heat-dissipation nozzle helps keep the handle area cooler. Fixed-frame take-up turntable makes rewinding and recycling excess wire easy. Translucent PP shell allows quick visual checks of remaining solder wick. Lightweight design at about 18 g with overall size 10.1 x 1.85 x 4.75 cm. Specifications: Material—copper wire; Size—10.1 x 1.85 x 4.75 cm; Weight—approx. 18 g; Wire options—1.5/2.0/2.5 mm x 2 m and 3.0/3.5 mm x 1.5 m. Fit: Compatible with standard electronics repair workflows and common bench setups.

Read more less

The Multi Function Wrench Set is a compact, metal tool kit designed for precise adjustments on small hardware. Each wrench measures about 10 cm long and 2 cm wide, built for durability. Ideal for light electronics maintenance, hobby projects, electronics enclosures, and bicycle components, this set helps tighten or loosen small nuts and rods with control. Small-size metal construction for reliable use in compact spaces. Supports 3 mm, 4 mm, 5 mm bayonet pull/push rods and 5.5–8.0 mm nuts. Each piece is about 10 × 2 cm, making the set portable. Packaged in a net bag for simple storage and organization. Useful for hobbyists, DIY repairs, and quick field adjustments. Fit and storage: The compact 10 × 2 cm profile fits in small tool kits, drawers, or pockets.

Read more less

Push Down 200 ml Alcohol Dispenser Bottle combines stainless steel and plastic for a durable, low-profile dispenser ideal for cleaning, nail art, makeup, and general use. Use it at your workstation to dispense isopropyl alcohol, disinfectants, or light solvents with a controlled, push-down action. Material: stainless steel outer body with plastic internals for corrosion resistance. Capacity: 200 ml; scale marks at 50 ml, 100 ml, 150 ml, 250 ml for quick volume checks. Seal: positive-seal cap minimizes evaporation and spills when not in use. Color and design: white finish with a smooth pump for professional use. Compatibility: suitable for alcohol-based cleaners, solvents, nail art liquids, makeup removers, and cleaning tasks. Maintenance: easy to refill and clean between liquids. Specifications: white color; push-down pump; 200 ml capacity; scale marks. Fit: designed to fit typical 200 ml dispensing setups found in beauty studios, salons, and cleaning stations.

Read more less

This 15-piece set of lead-free soldering tips is designed for electronics work. Each tip combines a copper core with a chrome-plated alloy exterior for durable heat transfer. Ideal for repairing PCBs, wire joins, and small component work where steady, precise heat is required. Suitable for hobby projects and light professional electronics tasks. Copper core with chrome-plated alloy exterior for durable heat transfer. Chrome-plated outer layer provides brightness and rust resistance. Lead-free construction supports safer electronics soldering. Tip length about 4.1 cm per piece for reach in tight spaces. Includes 15 tips with broad applicability across common tasks. Total set weight approximately 71 g. Specifications: Copper core, chrome-plated alloy exterior; tip length about 4.1 cm per piece; total weight about 71 g for the 15-piece set. Fit: designed to fit standard soldering iron tip holders and common electronics workstations.

Read more less

This multi-function through-hole cable clamp is a compact, practical tool for electricians and wiring projects. Built for durability and everyday use, it combines several functions in one hand tool. Use it to guide and secure cables through through-holes, then perform light wire tasks such as peeling, cutting, and curling in tight spaces or panel installations. High-carbon steel with electroplating for durability and corrosion resistance. Multifunction through-hole clamp supports wire peeling, cutting, curling, and gripping in tight spaces. Safety protection design reduces finger exposure; lock position keeps jaws secure when not in use. Lightweight spring aids easy jaw opening and reduces hand fatigue during repetitive tasks. Compact dimensions: 22 x 5.3 x 2.1 cm, suited for panel work and dense wiring. Model designation EZ rj45 pliers indicates its intended cable tasks and tool family. Specifications: Size 22 x 5.3 x 2.1 cm; Material: high-carbon steel; Finish: electroplated. The tool is designed for electricians performing through-hole cable routing in electrical panels, junction boxes, and wiring assemblies where a compact, secure clamp is helpful.

Read more less

Leatherworking Spacing Gauge, 153mm, built from carbon steel with a textured wheel surface for durable, stable marking. It’s designed for precise, repeatable line work along leather edges. Ideal for laying out evenly spaced stitch lines, edge guides, and arc marks on belts, wallets, and bags. The anti-slip screw prevents drift, helping maintain consistent distances during marking. Material and finish: carbon steel with textured wheel surface for wear resistance. Size and grip: 153 mm overall length; compact, comfortable to hold for extended work. Precision mechanism: screw-driven spacing keeps the distance from the tip constant and reduces deviation. Marking capabilities: creates equidistant edge lines, arcs, and positioning marks on leather. Compatibility and use: suitable for leather projects and works with standard marking tools and layout workflows. Fit: Appropriate for hobbyists and professional leatherworkers seeking repeatable, accurate marks on leather and similar materials.

Read more less

The Digger Ignition Key is a stainless steel replacement designed for heavy equipment. It provides a dependable, durable option when a spare key is needed for excavators, loaders, and similar machines. Ideal for maintenance crews and fleet operators, this key can help minimize downtime by keeping spare ignition tools on hand. It is compatible with standard ignition switches used on many diggers and other heavy equipment. Material: stainless steel with a satin finish Compatibility: fits most standard ignition cylinders used in heavy equipment Durability: corrosion-resistant and wear-resistant Use: suitable as a spare or replacement key for field service Maintenance: easy to inspect and keep clean Light specifications: Not provided. Fit: Designed to replace a lost or damaged ignition key for diggers and similar machines; verify blade shape and ignition lock compatibility with your specific model before purchasing.

Read more less

The Cable Stripper Tool is a portable tool designed for everyday wiring tasks, with a compact 8 x 3 x 2 cm profile for easy carrying. It's suitable for electricians, DIY enthusiasts, automotive wiring, and electronics projects where clean insulation removal is needed without nicking conductors. Compact, portable size: about 8×3×2 cm fits in a pocket or tool pouch Durable construction: manganese steel forging with high-frequency quenching for high hardness Precise stripping: specially designed stripping holes ensure neat insulation removal without damaging the core Surface and corrosion protection: polished, blackened finish with anti-rust oil Anti-static handle: two-color plastic grip reduces static risk during sensitive work Easy to use: straightforward stripping action for everyday cable tasks Specifications (light): Material – manganese steel; finish – polished with anti-rust oil; handle – anti-static two-color plastic; size – 8 x 3 x 2 cm. Fit: Compact, hand-friendly design supports comfortable, one-handed use for common wiring tasks.

Read more less

The Home Welding Repair Tool Pen is a compact, 3-in-1 gas soldering tool designed for quick at-home metal repairs. Lightweight and easy to use, it fits in a hand and supports precise control. Use it for jewelry repairs, small electronics enclosures, copper fittings, and repair tasks around the workshop. Interchangeable soldering tip for precise, targeted work. Adjustable flame to 1300°C and soldering heat to 450°C. 8 ml fuel capacity; refill with pure butane gas; manual ignition. Lightweight design (~69 g) for comfortable handling. Requires a lighter for ignition; follow safety steps before use. Regular nozzle cleaning and tip replacement extend life. Specifications: Material: plastic body with metal tip; Weight: ~69 g; Capacity: ~8 ml; Fuel: pure butane; Temperature range: flame up to 1300°C and soldering iron up to 450°C; Ignition: manual. Fit: Ideal for DIY enthusiasts and home repairs on small metalwork; not intended for heavy industrial tasks.

Read more less

The Wooden Handle Window Spline Roller is a practical tool for screen installation and window screen repair. It pairs a solid wood handle with a steel convex/concave roller to press spline into the groove. Ideal for door and window shops, housekeeping contractors, and DIY home window projects where a secure spline seating is needed. Combination tool: wooden handle with a steel convex and concave roller for versatile spline seating. Durable construction: solid wood handle, low-carbon steel bearing, and cast iron pulley for long-lasting use. Universal compatibility: suitable for decorative strips, aluminum doors and windows. Easy operation: align the wheel with the tape and roll to press the spline into the slot. Mesh replacement: designed to simplify replacing the screen mesh or spline. Compact size: 214 × 40 mm profile fits tight spaces. Specifications: Size 214 × 40 mm. Materials include solid wood handle, low-carbon steel bearing, and cast iron pulley. Fit: suitable for standard window screens, decorative strips, and aluminum frame installations.

Read more less

This integrated spot welder pen is a compact handheld tool designed for battery pack assembly. Built with thick copper strips for efficient heat dissipation and a clean appearance, it supports durable, repeatable welds. The body is made from an aluminum-copper alloy, with a pen length of about 155 mm and a cable length around 85 cm. Use this pen in batch welding workflows where consistent pressure and one-handed operation improve throughput. The handle uses double springs that expand and contract independently, ensuring balanced pressure on both soldering pins and reducing large sparks during welding. Independent double-spring mechanism provides balanced pressure on two pins for stable welds. Built-in travel switch enables single-handed operation; no foot pedal required. Thick copper strips offer efficient heat dissipation and long-term durability. Material: aluminum-copper alloy; overall length ~155 mm; cable ~85 cm. Integrated design meant to be used with a compatible spot welding machine; not for standalone use. Suitable for battery pack assembly and batch welding tasks with consistent results. Specifications: Pen length about 155 mm; Cable length about 85 cm; Material: aluminum-copper alloy with copper strips. Fit: Designed to work with compatible spot welding equipment and standard electrodes as part of a battery pack assembly workflow.

Read more less

This portable, multifunction folding plier keychain is designed for everyday carry. It combines pliers, a screwdriver, and a knife in a compact stainless steel tool for simple, on-the-go tasks. Ideal for quick repairs at home, roadside inconveniences, or outdoor camping where a small, reliable tool helps handle minor chores. Material: stainless steel for durability and corrosion resistance Functions: pliers, screwdriver, and knife integrated into one compact tool Size: open length ~77 mm; closed length ~51 mm; overall width 30 mm and height 6.5 mm Portability: includes a keychain hoop for easy attachment to a bag, belt, or keyring Color: as shown Packaging: 1 piece per bag Fit: compatible with standard keychains and everyday carry setups, keeping this tool within reach.

Read more less

Plastic Handle Nail Remover Gripper is a compact, lever-based tool for removing nails in wood projects. It uses a metal body with an ergonomic, non-slip grip for comfortable operation. Designed to extract nails from door frames, picture frames, and other wooden components, it employs lever action to reduce effort and provide steady nail removal. Lever-action design reduces hand effort during nail removal. All-metal construction delivers stiffness and resists bending under use. Non-slip grip provides secure handling even when working overhead. Suitable for nails wider than 4.5 mm and nail thickness around 1 mm. Length 15 cm and weight 100 g for balanced, portable use. Compatible with door frames, picture frames, furniture trim, and similar applications. Specifications: Length 15 cm; Weight 100 g; Material: metal; Handle: non-slip grip. Fit: Designed to fit nails wider than 4.5 mm; ideal for door frames, picture frames, and furniture trim.

Read more less

The 120mm Contour Copy Duplicator Tool is a PVC profile gauge designed to copy curved outlines for precise marking and layout tasks. Ideal for winding pipes, circular frames, ducts, and other rounded objects, it provides an instant template for accurate tile cuts and form-fitting layouts. Material and color: PVC plastic; color Blue with Black; anti-rust and durable. Size and range: Size 146 x 105 x 26 mm; measuring range 0–120 mm. How it works: press the tooth against the object to match the contour, then trace the shape. Applications: pipes, ducts, circular frames, tile work, and other curved profiles. Durability and maintenance: durable, high-strength plastic that wipes clean and resists rust. Compatibility: suitable for copying contours on curved profiles across PVC, metal, and common plastics. Fit: handheld, compact tool designed for on-site use.

Read more less

The Anti-Static Tin Suction Tool is designed for one-handed use at home, offering precise control and minimal static buildup during tasks. Use it for lifting tiny metal pieces, positioning components, or handling tins in crafts and electronics projects where a gentle, predictable suction is needed. One-handed operation with a compact 20.5 cm body for easy maneuvering. Airtight double-ring oil seal reduces air leaks during lifting. Exchangeable tin-absorbing head keeps maintenance simple and parts clean. Anti-slip stripes on the handle provide a firm grip even when hands are slick. Suction power reaches up to 30 cm-Hg for controlled lifting. Made from ABS; lightweight variants weigh about 60 g (N-G) or 81 g (NA). Specifications: Length about 20.5 cm; Material ABS; Suction: 30 cm-Hg; Weight varies by model. Fit: Suitable for home workshops, hobbyists, electronics prep, and crafts that require careful tin handling.

Read more less

Stainless Steel Mini Wire Cut Pliers with a red handle are compact, precise tools for electronics work in tight spaces. Designed for trimming thin wires and lightweight insulation in hobby projects, repairs, and classroom kits. The straight handle and comfortable grip support steady cuts. Jaws: Stainless steel jaws deliver durable, corrosion-resistant cutting with a clean edge for accurate results. Grip: Non-slip rubber handle provides secure control; straight design reduces hand fatigue during repeated tasks. Action: Lightweight spring returns the jaws after each cut for efficient, low-effort operation. Mouth: Oblique mouth with a flat cutting edge helps produce neat, flush end surfaces. Size: Red version 8.4 × 4.9 × 2 cm; Black version 8.4 × 4.3 × 2 cm. Available in red and black color variants, with corresponding sizes as listed. Fit: Fits in small tool kits, drawers, or pencil cases for convenient on-site electronics work.

Read more less

This stainless steel sand shovel is designed for beach exploration, gold panning, and light underwater use. Constructed from 304 stainless steel, it resists wear and rust while maintaining a sturdy, reliable scoop. With a compact 290 x 200 mm head and a balanced 1,457 g weight, the shovel offers comfortable control when sifting sand and sediment at the shoreline or while snorkeling near rocky patches. Material: 304 stainless steel for durability and corrosion resistance. Size and weight: 290 x 200 mm head; approximately 1,457 g for steady handling. Ergonomic handle: labor-saving design provides a secure grip during extended use. Filtering capability: effectively separates silt, clay, sand, shells and small stones. Portability: compact and light for easy carrying during surf and underwater exploration. Specifications: Material 304 stainless steel; Weight 1,457 g; Dimensions 290 x 200 mm. Best for hobbyists, casual beach explorers, and snorkelers seeking a dependable tool for shallow sediment collection.

Read more less

QianLi 1.5M Desoldering Wire is a low-residue copper braid designed for efficient solder removal and cleanup on precision electronics. Its braided pure red copper construction provides reliable capillary action for desoldering tasks in PCB work and component cleanup. Pure red copper braid with 2.0 mm width and plait-stitch construction Length 1.5 m for multiple uses Low-residue formula minimizes post-desoldering cleanup Anti-static plain-stitch braid for safer handling High heat conductivity and soft texture enable fast, clean desoldering Strong oxidation and corrosion resistance Beginner-friendly and easy to use Specifications: Length 1.5 m; Width 2.0 mm; Material: pure red copper; Color: copper-red; Packaging: sealed to protect braid. Fit: Suitable for precision electronics repair, hobbyist projects, and general desoldering tasks on PCBs and connectors.

Read more less

The 12 Inch Universal Water Purifier Belt Wrench is a carbon steel tool designed for home maintenance of purifier belts. It uses a plastic spray finish for durability and a secure grip. Ideal for loosening or tightening belts around water purifier housings, fittings, and pump assemblies in tight spaces where conventional wrenches struggle. Material and finish: carbon steel with a protective plastic spray coating. Two handle/belt configurations: 8-inch handle with 46 cm belt (2 cm wide); 12-inch handle with 57 cm belt (2.5 cm wide). Weight: about 280 g for the 8-inch variant; about 400 g for the 12-inch variant. Close bite design minimizes slipping without digging into the belt or oil grid. Easy to use: simple clamping action, adjustable belt length, and stable hand position. Durability: robust construction suited for repeated maintenance tasks. Optional light specifications: Color not specified; surface treatment is plastic spray to resist corrosion. The tool is designed to fit standard purifier belt sizes and fittings. Fit: Compatible with standard water purifier belt clamps and common home-maintenance tasks.

Read more less