This 18650 lithium battery protection board is engineered for 7.4V and 8.4V setups, providing fundamental safeguards to help maintain battery health in various electronic projects. In practical scenarios, it's useful for integrating into DIY battery packs for items like LED lamps, solar-powered devices, or 12V electronics, where it helps prevent overcharging and short circuits, potentially extending the lifespan of your batteries. Compact size: 35x16.6x2.5 mm, allowing for easy installation in space-limited designs Overcharge protection at 4.28V ± 0.05V to avoid voltage spikes Over-discharge cutoff at 2.9V ± 0.05V to protect against deep discharge Maximum working current of 3A, with peak instantaneous current up to 5A Low quiescent current under 3uA for minimal energy loss when idle Short circuit protection with delayed self-recovery for added safety Requires a charging voltage of 8.4-9V for compatible operation This board fits well in low-power applications such as massagers or monitoring systems, but it's important to ensure it matches your specific voltage needs for reliable performance.

Read more less

This 18650 lithium-ion battery charger is a practical device for recharging 18650 Li-ion batteries, complete with a US power plug for straightforward compatibility. In everyday scenarios, it's useful for hobbyists or users of devices like flashlights, vaporizers, or portable electronics, helping maintain battery life without the hassle of incompatible chargers or frequent replacements. Smart charging function to help prevent overcharging Wide input voltage range of AC100V-240V, 50-60Hz for global adaptability Output at 4.2V/650mA to suit standard 18650 batteries Includes a US power plug for easy connection to standard outlets Compact design for convenient storage and portability Compatible with most 18650 Li-ion batteries used in various applications Light specifications include DC 4.2V input, making it a straightforward choice for users needing reliable battery maintenance. This charger fits well for those with US electrical systems seeking an efficient way to power their devices.

Read more less

This 18cm DisplayPort male to female extension cable serves as a simple way to extend connections between DisplayPort devices, such as monitors and computers. In scenarios like tight desk arrangements or wall-mounted setups, this cable provides just enough length to bridge short gaps without creating cable clutter, making it ideal for organized workspaces. 18cm length minimizes excess cable, helping maintain a neat setup Male to female DisplayPort connectors for straightforward extension Compatible with standard DisplayPort devices, including most modern monitors and graphics cards Plug-and-play design requires no additional software or tools Supports high-definition video and audio signals through DisplayPort technology Compact size fits well in space-limited environments Light specifications include a length of 18cm, with standard DisplayPort connectors. This cable suits users needing a brief extension for precise connectivity needs.

Read more less

Metal pry tool for phone and tablet disassembly, 18cm — a compact all‑metal pry bar designed for precision opening of mobile device casings. The 18cm length balances reach and control for handheld repair tasks. Use case: suited to DIY screen replacements, battery swaps, and component access on phones and tablets. The flat head and stick‑slip edge let technicians and hobbyists ease seams open without applying excessive force. Material: single-piece metal construction for repeatable use and edge retention. Length: 18cm (7.1 in) offers controlled leverage in small cavities. Tip design: flat head for separating housings and lifting adhesive seams. Motion control: stick‑slip geometry reduces sudden slips during prying. Portable: slim profile fits standard tool rolls or pockets. Light specifications: 18cm total length; all‑metal body; flat pry tip; weight varies by alloy. Fit: compatible with most phone and tablet models that require a thin metal pry for edge separation; not intended for heavy structural prying or cutting.

Read more less

This 18cm x 26cm zip lock bag features a clear front and solid white back, designed for practical storage and packaging needs. In everyday use, these bags help keep items like cell phone cases, accessories, or small electronics protected from dust and moisture, making them handy for organizing drawers, travel, or shipping. Dimensions of 18cm x 26cm provide a compact size for various small items Clear front allows easy visibility of contents, while the white back offers a clean, opaque finish Zip lock closure ensures secure sealing for repeated use Material is durable plastic, suitable for recycling after use Protects against dust and damp, helping maintain item condition Versatile for phone accessories, tablet cases, or other small gadgets These bags fit well for anyone seeking reliable, everyday packaging solutions for personal or professional organization.

Read more less

These 18mm spring clips offer a practical solution for securing car fuel and water hoses, helping to maintain tight connections and prevent potential leaks. In everyday use, such as during vehicle maintenance or repairs, these clips can be quickly applied to hoses like fuel lines or water pipes, ensuring they stay in place without slipping, which is useful for DIY enthusiasts or mechanics working on automotive projects. Made from durable spring steel 65MN material for reliable performance Compact design that's easy to operate and carry, requiring no special tools Versatile compatibility with air hoses, water pipes, fuel lines, and silicone hoses Each clip measures 18mm inner diameter, 20mm outer diameter, 1mm thickness, and 12mm width for precise fit Includes a pack of 10 clips, providing multiple options for various applications This product fits well for those involved in automotive upkeep, offering a straightforward way to handle hose securing tasks effectively.

Read more less

Compact 18‑megapixel digital camera with a 2.7-inch TFT LCD and CMOS sensor designed for student use and everyday photography. Records stills in JPEG and video in AVI at up to 1280x720 HD. Useful for classroom projects, travel snapshots, and casual family photos. Built-in scene modes, face priority and anti-shake help capture usable images without manual setup. 18MP CMOS sensor, 8x digital zoom Video: 1280x720 HD, 640x480 VGA, 320x240 QVGA; JPEG/AVI formats 2.7" TFT LCD, continuous shooting (VGA, 6 frames) Exposure EV-3 to EV+3, ISO Auto/100/200/400, white balance presets Flash: auto/forced/off/red-eye; features: macro, face priority, anti-shake USB 2.0 port; battery: 550mAh lithium‑ion Light specifications: size 9.2 x 6 x 2.5 cm; weight 180 g; system requirements Windows XP/Vista/7, Mac. Fit statement: Compact form and basic manual controls suit beginners and students who need a portable camera for assignments and everyday use.

Read more less

This 18W AU Plug Power Adapter offers a practical solution for charging devices on the go or at home. Whether you're traveling in Australia or using it daily, this adapter helps maintain device power for smartphones, tablets, and other gadgets, thanks to its compact design that slips easily into bags or pockets. Lightweight construction for effortless portability during trips AU plug type ensures compatibility with standard Australian outlets Universal input of AC100-240V, 50-60Hz, allowing use in various countries Multiple output options: DC3.6V-6.5V at 3A, 6.5V-9V at 2A, and 9V-12V at 1.5A, supporting a range of device charging needs Reliable performance for everyday use without unnecessary bulk With its versatile features, this adapter is a good fit for travelers or daily users seeking a straightforward charging option for compatible devices.

Read more less

1. Material: PC2. Weight: about 47 grams3. Size: US Plug 4.5x2x7 cm, EU Plug 4.5x2x8 cm, UK Plug 4.5x2x7.8 cm4. Input parameters: AC100-240V, 50--60Hz, 0.5A5. Output parameters: 5V/3A, 9V/2.4A, 12V/1.8A6. Scope of application: most smart phones and other digital products can be used7. Features: flame retardant material, safe and reliable, 6-fold protection, USB interface, wide applicability, 18W fast charge

Read more less

This 19-piece car cleaning brush and glove tool set groups brushes, sponges, cloths and gloves for routine vehicle maintenance. Components are designed for interior and exterior cleaning without abrasive contact on common finishes. Use it for weekly washes, wheel cleaning, dashboard dusting and vent detailing. Multiple brush sizes and a vent outlet brush reach tight areas; water‑absorbent cloths and wax sponges handle polishing and drying after washing. Versatile brushes: multiple heads with 25–35 mm bristle lengths for wheel rims, trim and crevices. Detail filament brushes: composite filaments for precise cleaning around emblems, seams and vents. Protective gloves: waterproof gloves to keep hands dry and reduce transfer of oils to surfaces. Polishing kit: orange wax sponges and microfiber wash cloth for streak‑free drying. Compact set: assorted plastics, PP and metal fittings; total net weight 930 g for easy storage. Light specifications: bristle length 25–35 mm; materials: plastics, polypropylene (PP), metal; includes vent brush and microfiber cloth. Fit: Designed for most passenger cars, SUVs and light trucks; suitable for home garage or mobile use.

Read more less

The 19mm Car Button Switch With Light is a compact, brass nickel-plated push-button with a flat head designed for weatherproof panel installations. It suits automotive dashboards, marine controls, and outdoor equipment where a visible, protected switch is needed in variable conditions. 19 mm mounting cutout with brass nickel-plated body and flat head LED indicator powered by 12–24 V for clear visibility Contact configuration: 1 normally open (NO) and 1 normally closed (NC) Terminal type: soldering; no pre-attached leads Rated for up to 4 A at 220 VAC Protection: IP67 waterproof, IK09 impact resistance; weight ≈ 17 g Optional light specifications: integrated LED operates within a 12–24 V supply, providing status indication in low-light environments. Fit and compatibility: designed for a 19 mm panel cutout; ensure the mounting hole matches the spec for secure installation.

Read more less

The 1 cm Cube Durable Silicone Ice Tray is crafted from food-grade silicone for safe, reusable ice shapes in everyday use. It features 1 cm cavities for consistent cubes and quick freezing in standard freezers. Use this tray for cocktails, iced coffee, or water, and also for small chocolate pieces or gelatin shapes for desserts and party treats. Flexible silicone allows easy release without cracking, and it’s easy to clean and store. 1 cm cube cavities for uniform cubes and fast chilling. Food-grade silicone material, BPA-free and safe for food contact. Versatile use—ice, small chocolates, gelatin, or candy molds. Easy release thanks to flexible, non-stick design; cubes pop out with little effort. Compact and reusable—stackable for space-saving storage and repeated use. Specifications — Material: silicone; Cube size: 1 cm; Use: freezer-friendly for ice, chocolate, and gelatin applications. Fit — Designed to work with standard drinkware and standard freezer layouts; store flat when not in use.

Read more less

The 1L Plush Hand Warmer is a portable heat bag wrapped in soft imitation sherpa fabric for steady, comfortable warmth. Use it at a desk, during commutes, or at home to warm hands, feet, or the torso. Plush exterior with uniform heat distribution Thick PVC inner tank with leak-proof seal Size 35 x 25 cm; weight about 230 g Fill to two-thirds of capacity and remove excess air Heat time about 4–8 hours depending on ambient temperature Safe handling; resistant to leakage when squeezed or shaken Specifications: Outer material imitation sherpa; inner tank thick PVC; capacity ~1 L (fill to 2/3); dimensions 35 x 25 cm; weight ~230 g. Fit: Suitable for anyone needing targeted warmth at home, work, or outdoors in cool weather.

Read more less

1 m Blue Waterproof Flexible Car Strip Light is a durable, flexible LED strip designed for automotive use. It provides compact lighting that fits along trim and panels in cars and motorcycles. Use it to add subtle accent lighting under dashboards, along door sills, inside trunks, or on fairings. The blue glow helps with low-illumination visibility without glare, and the flexible construction makes it easy to follow curves and corners on most vehicles. 60 LEDs (3528 SMD) for uniform blue light Flexible strip that bends to follow contours Waterproof design for exposure to moisture and weather 12V DC compatibility with most cars and motorcycles Length: 1 meter Specifications: LED type 60 x 3528 SMD; Color blue; Length 1 meter; Voltage 12 V DC; Waterproof construction. Fit: Suitable for 12V automotive electrical systems. Plan installation on interior or exterior surfaces with proper mounting and polarity checks.

Read more less

A one-meter long, cold-light LED strip designed for car decoration provides flexible, durable lighting for DIY styling and subtle accents. Its flexible, tube-like design lets you trace contours along dashboards, door panels, trunks, grills, or under seats. Waterproof construction supports both indoor and outdoor applications with steady, low-power illumination. Flexible, bendable tube that follows curved surfaces and can be cut to length Soft plastic housing for durable, easy installation Cool white LED light with neutral color and minimal glare Low energy consumption with a long lifespan Waterproof design suitable for indoor or outdoor use Simple integration with basic car power sources and mounting methods Specifications: Length: 1 m; Color: cool white; Material: soft plastic; Waterproof; Intended for car decoration and DIY projects. Fit: Suitable for lining dashboards, door trims, trunks, or exterior accents to add a subtle, uniform glow without overpowering the cabin ambience.

Read more less

The 1 m Waterproof USB Dashboard Extension Cable extends USB connectivity to car and motorcycle dashboards with a dual-port USB 3.0 interface. It is designed for automotive environments requiring a protected data link. Use cases include embedding a USB input to a panel or console, allowing external car audio devices or USB accessories to connect without loose cabling along the dash. Dual-port USB 3.0 extension for dash panels Backward compatible with USB 2.0 and USB 1.1 devices Waterproof design suitable for exposed dash areas 1.0 meter cable length for flexible routing Embedded mounting hole size 25 mm for panel installation Works with external car audio equipment USB inputs Specifications: Cable length 1.0 m; mounting hole diameter 25 mm; USB 3.0 interface (backward compatible with USB 2.0/1.1). Fit: Designed for dashboards and panels that accommodate a 25 mm mounting hole, suitable for cars and motorcycles.

Read more less

This 1mm width double-sided adhesive tape is designed for precise mobile screen repair and component bonding. It provides narrow, transparent adhesion for touch screens, LCD panels, and small electronic parts without altering the device's appearance. Use cases: suitable for DIY phone screen replacements, tablet digitizer installs, and small electronics assembly. The narrow 1mm profile helps place adhesive in tight seams, while the removable acrylic formula reduces residue on glass and plastic surfaces. Width: 1mm for precision placement in tight gaps. Material: Acrylic adhesive — pressure-sensitive and heat-resistant. Length: 25m roll for multiple repairs or production runs. Appearance: High transparency to preserve screen clarity. Performance: Strong viscosity, odor-free, and can be cut to shape. Light specifications: compatible with glass, plastic, and metal substrates; suitable for temperatures typical in device repair (hand-soldering/assembly range). Fit statement: 1mm width fits narrow bezels and small component joints—measure the gap before applying for optimal placement.

Read more less

2 in 1 18W QC3.0 Car Charger with an 8Pin cable offers a compact, in-vehicle charging solution for everyday road trips. Use it during daily commutes, family trips, or long drives when multiple devices need charging at once. 18W total output with QC3.0 USB: 5V/3A, 9V/2A, or 12V/1.5A to support fast charging on compatible devices USB2.0 port provides up to 5V/3.1A max for additional devices Small, low-profile design fits most vehicle cigarette-lighter sockets 8Pin cable features 150 copper wires, supports 3A fast charge and data up to 480 Mbps Cable length is 1 meter for flexible routing and neat installation Broad compatibility with phones and tablets from Apple, Samsung, Huawei, Xiaomi, and more Optional specifications: Input 12–32V DC; total output 18W; QC3.0 protocol supported; 1 m 8Pin cable with high-conductivity wiring and data rate up to 480 Mbps. Fit: Suitable for vehicles that provide 12–32V DC power and devices with an 8Pin connector.

Read more less

This 2 in 1 Car Aux and USB Adapter provides a practical way to connect audio from a portable device and power it in the car. The plastic housing keeps the unit lightweight and durable for daily use. Use it to play music from a phone or MP3 player through your car stereo while charging, without changing cables or interfaces. 2‑in‑1 design combines an auxiliary audio connection with a USB charging port. Plastic housing keeps the unit lightweight while resisting daily wear. Simple plug‑and‑play installation in compatible VW models. Compatible with VW Scirocco, New Magotan, Touran, and Polo head units. Allows audio streaming from a phone and charging at the same time. Fit: Designed for VW Scirocco, Magotan, Touran, and Polo vehicles with a standard AUX input.

Read more less

This 2-in-1 Bluetooth AUX device works as both a receiver and a transmitter for in-car audio. It plugs into any vehicle AUX input to enable wireless streaming from phones or transmit audio from non-Bluetooth sources. In daily use, switch to RX to play music from your phone through car speakers. Switch to TX to send audio from a non-Bluetooth source to Bluetooth headphones. 2-in-1 RX/TX modes with an easy switch; up to 10 m Bluetooth 5.3 with DSP processing and A2DP for clear stereo Built-in 240 mAh battery; ~50-minute charge time RX mode outputs audio to car speakers via AUX TX mode streams audio from non-Bluetooth devices to Bluetooth One-touch hands-free calling when connected Specifications at a glance: Bluetooth version 5.3; battery 240 mAh; charging time ~50 minutes; wireless range up to 10 meters. Fits vehicles with standard 3.5 mm AUX inputs for easy integration.

Read more less

This compact 2 In 1 Car Charger with Micro USB Cable provides in-vehicle charging for smartphones and tablets. Ideal for daily commutes and road trips, it keeps devices powered while you drive, with one fast-charging USB port for quick top-ups and a 1 m Micro USB cable. 18W total output with QC3.0 fast charging (5V/3A, 9V/2A, 12V/1.5A) USB 2.0 port up to 3.1A for additional devices Micro USB cable included (1 m) with 150 copper wires and 480 Mbps data transfer Compact, low-profile design fits most vehicle outlets Wide compatibility with Apple, Samsung, Huawei, Xiaomi, and other brands Specifications — Input: 12–32V DC; Output: 18W total; QC3.0 port: 5V/3A, 9V/2A, 12V/1.5A; USB 2.0 port: up to 3.1A; Cable length: 1 m; Micro USB cable uses 150 copper wires and supports 480 Mbps. Fit — Compatible with vehicles featuring 12–32V DC power outlets.

Read more less

This 2 in 1 carbon fiber gear decorative sticker is designed for Jeep Wrangler JK models from 2007 to 2010, offering a simple way to customize your vehicle's appearance. In everyday use, it's ideal for owners looking to add a subtle, personalized touch to their car's interior or exterior, such as on gear shifts or panels, without permanent alterations or professional help. Made from lightweight carbon fiber material for enhanced durability and resistance to wear. Features a 2 in 1 design, allowing for versatile application in multiple spots. Easy to install with no special tools required, making it accessible for DIY enthusiasts. Precisely tailored to fit Jeep Wrangler JK 2007-2010, ensuring a secure and neat attachment. Provides a clean, modern look that can help differentiate your vehicle from others on the road. Lightweight construction helps maintain the vehicle's original performance without added bulk. Light specifications: Material is carbon fiber; dimensions are standard for gear applications. For optimal fit, confirm your vehicle model before application.

Read more less

The 2 in 1 Carbon Fiber Gear Frame Sticker offers a practical way to customize the interior of Ford Mustang vehicles from 2015 to 2020. For Ford Mustang owners, this sticker serves as an easy addition to the gear frame, helping to refresh the dashboard area with a simple material that blends durability and a sleek finish, making routine drives more personalized without altering the original design. Constructed from carbon fiber for lasting resilience and reduced weight compared to plastic alternatives Simple peel-and-stick application, requiring no special tools or professional help Precisely sized to fit the gear frame on Ford Mustang models 2015-2020, ensuring a seamless integration Provides a matte texture that resists everyday wear, maintaining a clean look over time Lightweight build that won't add bulk, preserving the vehicle's handling feel This sticker fits well for those updating their Ford Mustang's interior with subtle, functional enhancements.

Read more less

1. Easy to install. 2. Decorate car appearances, make your car particular and unique. 3. Durable and light weight. 4. Suitable for Ford Mustang. 5. Material: carbon fiber

Read more less