The Car Heater Defroster Fan with three outlets is a compact 12V device designed to warm the cabin and help clear the windshield quickly. In winter, it provides fast air to the front area and supports defrost, defog, and deice tasks for safer visibility. Three outlets distribute warm air across a wider area. 180-degree rotating bracket allows flexible airflow direction. Copper wiring and heating element support reliable operation with minimal battery drain. Plug directly into the car cigarette lighter; no extra power source needed. Defrost, defog, and deice functions target the windshield. Compact, durable housing suits dash storage. Specifications: Power is 12V DC from the cigarette lighter. Air outlets are three with adjustable direction. Fits most cars and trucks with standard 12V lighter sockets.

Read more less

This Car Heater Inlet Water Hose Connector Plug provides a direct replacement for a worn or broken heater inlet plug in Buick Encore and related models. Use it during coolant system maintenance or when the original plug leaks or fails, making a straightforward swap that reduces downtime. It’s suitable for DIY repairs or shop service projects. Material and durability: wear-resistant plastic designed for long life Direct replacement: replaces worn or broken plugs OE references: 95089363, 95089364 Easy installation: simple swap with standard hose fittings Compatibility: Buick Encore and Chevrolet / Sonic / Trax / Opel Tracker Mokka Reliable performance: supports steady coolant flow and seal Specifications: Material: plastic; OE numbers: 95089363, 95089364. Fit: Buick Encore and the listed GM models; verify compatibility with OE numbers before purchase.

Read more less

This Car HID Headlight Conversion Cable comes in a 2-pack, designed for straightforward HID wiring without modifying stock wires. Use this cable when upgrading from stock headlights to HID assemblies or when replacing damaged connectors. It wires directly without modifying factory wires. Insulated for heat resistance in under-hood environments Low power consumption with reliable current delivery Pre-wired for plug-and-play installation No modification required to stock wires Copper conductors for effective conductivity Includes two connectors (male to female) to fit common HID setups Construction uses copper wiring with an insulated sheath designed for automotive use. Fits HID ballasts and headlight assemblies that use a standard male-to-female harness. Safe and simple to install, this cable set promotes clean connections and reduces the risk of loose wires during HID upgrades. Designed for use with standard HID ballasts and headlight inputs that require male-to-female connectors.

Read more less

Car Hidden Acrylic RGB LED Ambient Light Strip creates subtle, customizable interior mood lighting for your vehicle. Built from ABS and silicone, it stays flexible, discreet, and resistant to yellowing. Ideal for dashboards, footwells, and door panels, it hides along trim lines and adds ambient color without glare. Control options include a companion app, remote, and touch switch for quick changes. 12V DC input for vehicle use 5W nominal power RGB color options with streamer lighting Flexible, ultra-thin silicone strip with hidden LEDs App control plus touch button for convenient operation Includes main control box, auxiliary control boxes, and switch Specifications: Voltage 12V; Power 5W; Current 0.02A; Service life about 50,000 hours; Material ABS and silicone; LED beads RGB. Fit: Designed for 12V vehicle electrical systems; suitable for most cars, trucks, and SUVs.

Read more less

Car Hood Aluminum Foil Heat and Sound Insulation Pad provides a practical solution to reduce heat transfer and cabin noise. It uses oil-, water-, and heat-resistant aluminum foil with a soft, cut-friendly surface for installation. Apply on roofs, hoods, firewalls, chassis, trunks, or trunk lids to dampen noise and reflect heat. Do not cover chassis wiring or vents. Material and resistance: Aluminum foil with oil-, water-, and heat-resistance. Noise and UV control: Blocks UV rays and reduces reflected noise. Cuttable and easy to install: Can be trimmed to fit curved or flat areas. Adhesion: Strong backing remains sticky across extreme temperatures. Sizes and pattern: Checkered surface; available in four sizes: 250x180x5, 250x180x10, 400x250x5, 400x250x10 mm. Light specifications: Four size options support flexible placement; adhesive designed for durable performance. Fit: Can be trimmed to suit most layouts; avoid wiring and vents to ensure proper placement.

Read more less

This 5-piece set of PVC decorative stickers is designed for adding subtle style to your car's hood and sides. Each piece fits specific areas, offering a simple way to refresh your vehicle's appearance. For car owners looking to personalize their ride without permanent changes, these stickers provide an easy application process. Simply clean the surface, apply the stickers, and enjoy a customized look that can be removed without damaging the paint. Constructed from durable, lightweight PVC material that resists fading over time. Easy removal leaves no residue or tears on the car's surface. Includes two 15 x 2.4cm stickers for rear view mirrors, one 120 x 15cm for the hood, and two 220 x 11.5cm for the sides. Adheres firmly to maintain position during drives. Available in a versatile design that complements various car colors. Compact and flexible, allowing for straightforward installation on curved surfaces. These stickers suit everyday vehicles, ideal for enthusiasts seeking affordable customization options that enhance aesthetic appeal without long-term commitment.

Read more less

The Car Hood Fender Bumper Fixing Kit All In One provides a practical hardware set for repairing splash shields and nearby body panels. Designed for quick, direct replacement on compatible Infiniti and Nissan models, it helps restore secure mounting when original clips, bolts, and rivets wear or corrode from road salt and grime. Carbon steel construction offers corrosion and wear resistance Includes 15 body bolts, 10 extruded U-nuts, and 10 nylon push clips Surface finished with anodizing for durability in harsh conditions Direct replacement for stock hardware with proper fitment Compatible with 2003–2008 Infiniti G35 Sedan, 2003–2007 G35 Coupe, 2008–2014 G37/G37X, 2003–2008 Infiniti FX35/FX45, 2008–2012 Infiniti EX35, 2009–2014 Nissan 370Z, 2003–2009 Nissan 350Z Supports door trim, bumper, fender flare, grille, wheel well, air intake, engine cover, mud flap and splash guard retainers Light specifications: Material — carbon steel and plastic; Finish — anodized coating for improved longevity. Fit: Designed to replace stock splash shield hardware on the listed models and mounting points.

Read more less

This four-pack Car Horn Switch Button offers a compact on/off control for vehicles and small industrial electronics. Each switch has a 34 x 25 x 14 mm ABS shell with flame-retardant properties. Use this switch to replace worn horn buttons or add a simple, reliable control to dashboards, instrument panels, or enclosure housings. The press-and-hold action provides straightforward on/off operation. Material: ABS with flame-retardant protection Size: 34 x 25 x 14 mm for compact mounting Adhesive backing enables easy surface mounting on flat panels On/off control via press-and-hold action Pack of four switches for multiple circuits or spares Broad compatibility with automotive and industrial electronics Fit: designed for flat panels and dashboards where space is limited; adhesive backing supports quick installation in cars, control boxes, or small enclosures.

Read more less

The Car Hose Clamp Set is a 52-piece stainless steel clamp kit designed for dependable hose fastening in automotive, home, and industrial settings. Made from 304 stainless steel with rubber cushions, these clamps resist salt, corrosion, water, and oil exposure. The six clamp sizes cover a range from compact to medium hoses, and the transparent storage box keeps parts organized for quick access. Material: 304 stainless steel with 4 mm rubber cushions for gentle grip and vibration dampening Corrosion and rust resistance suitable for automotive and appliance environments Six sizes: 1/4" (6 mm) to 3/4" (19 mm) outer diameter; band width 12 mm; screw diameter 6 mm Total of 52 pieces in a clear storage box for easy organization Includes flexible range for hoses in engines, coolant lines, air ducts, and machinery Simple installation with standard screw drive; suitable for lightweight or medium-duty applications Specifications: Band width 12 mm; screw diameter 6 mm; steel sheet thickness 0.6 mm; rubber thickness 4 mm. Fits hoses with outer diameters from 6 to 19 mm (approximately 1/4" to 3/4").

Read more less

The Car Hose Spring Clip provides a practical, reusable solution for securing small-diameter hoses in automotive and workshop settings. Use these clips to route and stabilize air hoses, water lines, fuel lines, and silicone hoses, helping prevent movement and abrasion in tight spaces. Inner diameter: 6 mm; outer diameter: 7 mm; thickness: 0.5 mm; width: 6 mm. Material: spring steel 65Mn for consistent clamping force and durability. Compatibility: suitable for air hoses, water pipes, fuel lines, silicone hoses, and similar flexible tubing. Easy to install and remove with a straightforward clip-on design. Pack includes 10 pieces, offering multiple clips for different connections. Reusability: can be reused across projects without significant loss of grip. Specifications: 6 mm ID, 7 mm OD, 0.5 mm thickness, 6 mm width. Material: spring steel 65Mn. Pack: 10 pieces. Fit: Designed for hoses with a 6 mm inner diameter.

Read more less

The Car HUD Display projects essential driving data onto your windshield, aiding in GPS navigation and monitoring vehicle altitude for safer road trips. In daily commutes or long highway drives, this device helps by displaying speed, altitude, and alerts directly in your line of sight, reducing the need to glance at your dashboard and minimizing distractions. GPS/Beidou dual-channel for stable satellite signals, ensuring reliable data even in challenging areas Intelligent gradient system with free rotation for improved sensitivity and accurate readings Real-time monitoring of voltage, pitch, roll, and overspeed with audible alarms for enhanced safety High-definition color screen that automatically dims based on ambient light for better visibility ABS and PC materials, designed to withstand high and low temperatures for durability Energy-efficient operation that starts with the vehicle and shuts off when the engine does Light specifications include a compact size of about 12.7 x 2.5 x 6 cm and compatibility with most car models via DC 10-30V power supply. This HUD fits drivers seeking practical tools for navigation and vehicle monitoring on various road conditions.

Read more less

Car Imitation Engine Lock Body Decorative Stickers offer a simple way to enhance your vehicle's interior with subtle, non-functional accents. Available in a 2-pack, they feature a plastic design that mimics engine locks for added visual interest. In everyday use, these stickers work well for car owners looking to personalize their dashboard or console areas. They provide an easy option for refreshing a car's appearance without permanent modifications, suitable for both daily drivers and enthusiasts seeking minor customizations. Lightweight construction allows for effortless installation on various surfaces. Wear-resistant and scratch-resistant material ensures long-lasting durability. Soft and flexible design adapts to curved areas for a seamless fit. Compact size of 7 x 13 x 0.3 cm makes them ideal for tight spaces. Random decorative style adds a unique touch to your car's interior. Specifications include plastic material, which offers reliable adhesion. This product fits most standard vehicle interiors, providing a practical solution for aesthetic upgrades.

Read more less

This car inclined stainless steel muffler exhaust pipe is crafted from 304 stainless steel to resist rust and provide lasting durability. The black finish pairs with many exhaust systems, and a screw-fixed installation lets you retrofit it quickly. Ideal for universal installation on a wide range of vehicles where reducing exhaust noise and smoothing flow are priorities. It supports quieter operation on daily driving and lighter vibrations after installation, contributing to a calmer cabin and consistent exhaust feel. Material: 304 stainless steel for corrosion resistance and longevity Finish/Color: Black Dimensions: length 170 mm; inlet 76 mm; outlet 101 mm or 114 mm Installation: screw-fixed for straightforward mounting Compatibility: universal fit across many makes/models Noise/Performance: helps reduce exhaust noise and promote smoother exhaust flow Fit: Universal compatibility; verify inlet/outlet sizes on your exhaust system before installation.

Read more less

A car inclinometer is a practical tool that measures the slope and tilt of roads, helping drivers assess conditions more accurately. For those frequently driving on hilly or uneven terrains, such as rural roads or mountain passes, this device offers quick readings to adjust speed and approach, potentially reducing risks associated with steep inclines. Provides fast and accurate responses to slope and tilt changes for timely awareness. Features high sensitivity to detect even subtle angle variations during drives. Simple to operate with no complex setup, making it easy to carry and use on trips. Adheres securely to flat surfaces like a dashboard for straightforward installation. Delivers reliable data without overwhelming the driver, focusing on essential road information. This inclinometer suits drivers seeking added convenience for everyday commutes in varied landscapes, fitting seamlessly into standard vehicle setups.

Read more less

The Car Instrument Console Net Pocket Storage Hanging Bag helps organize small items within reach. Made of leather, it offers a simple, practical storage solution for the driver and passengers. Designed for a universal fit, it attaches to multiple locations including the door panel, front or rear seat area, gear head, armrest box, or trunk. Material: Leather; large size 21.5 cm × 14 cm (also available in small 17 cm × 12.5 cm). Universal fit with multiple mounting locations for flexible placement. Keeps tissues, cards, phones and other small items within easy reach. Easy installation: clean the mounting surface, apply once, press firmly, avoid re-pasting. Adhesive requires about 24 hours to cure; let the product sit before use. Sizes: Large 21.5 cm × 14 cm; Small 17 cm × 12.5 cm. Material: Leather. Before driving, verify the pocket is securely attached to prevent movement while driving. Fit: Universal type; suitable for most cars and interiors.

Read more less

Upgrade your car’s dashboard with a compact LED light for the instrument panel. This plug-and-play option fits 12V systems and requires no modifications. Ideal for night driving, it improves visibility of the speedometer, gauge cluster, and indicator lamps while keeping power usage low. Fast on/off response High luminous efficiency with low power draw Long service life and energy-saving operation Green, environmentally friendly materials Easy installation: plug and play, no wiring needed Suitable for Instrument Panel, Speedometer, Gauge Cluster, and Indicator Lamps Specifications: Working voltage 12V; power 0.2W. Fit: compatible with standard 12V automotive instrument panels.

Read more less

The Car Intelligent AI Box Wireless Android Auto Adapter adds Android Auto to your vehicle with a simple plug‑and‑play setup. Use it to view maps, read messages, and play music on the car display while keeping your phone duties integrated and hands-free. Non-destructive installation with plug‑and‑play setup; compact and flexible, fits in tight dash spaces. 5G WiFi provides stable wireless transmission with minimal dropouts during navigation or streaming. Android Auto links your phone to the car's infotainment system, enabling apps, navigation, calls, and messages on the dashboard. Widely compatible with a range of Android smartphones and head units that support Android Auto. Material: PC+PVC construction designed for automotive environments. Light specifications: Compact form factor suited for tight dash spaces. Material PC+PVC provides durable use in vehicles. Connectivity is wireless via 5G WiFi. Fit: Works with Android Auto‑enabled head units; verify phone model and vehicle compatibility before purchase.

Read more less

This car interior cleaning brush with soft bristles is designed for targeted cleaning of narrow areas in vehicles. Its soft PP bristles and sturdy ABS handle help remove dust and debris without scratching surfaces. Use it to clean air vents, seat crevices, console buttons, cup holders, steering wheel seams and other tight spaces where a cloth can’t reach. The brush is useful for daily drivers and home-detailing tasks that require precision rather than heavy-duty scrubbing. Soft PP bristles: gentle on plastic, vinyl and painted surfaces. ABS handle: durable grip with a firm brush connection to reduce bristle loss. Two sizes: short ~16 cm (45 g) and long ~24 cm (65 g) for different reach needs. Hanging hole: easy storage in a garage or tool bag. Versatile use: fits vents, seams, cup holders and electronics crevices. Light specifications: Materials: PP bristles, ABS handle. Colors: standard black handle with natural bristle color. Fit statement: Suitable for most car interiors and for users seeking a precise, low‑risk cleaning tool.

Read more less

This Car Interior Cleaning Gun is designed to remove dust from vents, dashboard crevices, seat seams and other tight areas without abrasive contact. The tool balances reach and control for routine interior cleaning of cars and light commercial vehicles. Use it with a standard air compressor to blow dust from air-conditioning vents, audio gaps, door edges and plastic trim. The rotating alloy nozzle accesses angled openings and helps dislodge trapped debris while keeping surfaces intact. Material: aluminum alloy body and rotating tube for corrosion resistance and reduced weight. Weight: approx. 450 g for handheld use. Pressure range: operates for everyday tasks at 4–8 kg; tube rated for broader 3–24 range. Connection: 1/4" interface compatible with common air compressors. Applications: vents, engine bay detailing, AC outlets, trimmed panels. Light specifications: rotating nozzle, alloy construction, 1/4" fitting, 450 g. Fit statement: suitable for car owners and detailers seeking a practical, compressor‑powered tool for routine interior and light engine/AC cleaning.

Read more less

A PVC car interior decoration sticker designed for everyday use. It features a fine, natural texture and a waterproof surface. Use it to refresh dashboards, door panels, and console trims without permanent alteration. The material helps protect the surface and can be cut to fit irregular shapes. Material: PVC with a waterproof, moisture-resistant surface. Adhesive: Thick self-adhesive backing with three layers of water-based, non-drying adhesive for even sticking. Installation: Easy peel-and-stick application; clear patterns aid measurement and cutting. Maintenance: Simple to clean with a damp cloth to remove surface stains. Size: About 50 x 100 cm, suitable for standard car interior panels and can be trimmed to fit. Specifications: Size: approx. 50 x 100 cm; Material: PVC; Finish: textured; Backing: eco-friendly three-layer water-based adhesive. Fit: Best on flat to gently curved panels; for tight curves, trim to fit as needed.

Read more less

The Car Interior Door Lights 2 Pack delivers practical interior illumination for dashboard and dome areas with simple, reliable installation. Ideal for brightening entry points, map areas, and reading light tasks inside the cabin. These modules are designed to work with CAN‑BUS systems to minimize dashboard warnings and fit into common interior light housings with minimal effort. Aluminum alloy housing provides high-temperature resistance and durable, non-fading illumination High-brightness LED modules for clear, even interior lighting Low power consumption for efficient operation Easy, tool-free installation in standard interior light sockets 2-pack set offers coverage for multiple locations Suitable for dashboard, dome light, door well, and reading light applications Optional light specifications: designed for typical automotive electrical systems. Verify compatibility with your vehicle’s interior lighting setup. Fit: compatible with standard interior light housings and CAN‑BUS configurations.

Read more less

The Car Interior Door Lights are a compact 2-pack of 36mm white LED modules designed for reliable cabin illumination. Use them as reading lamps, dome lights, or door courtesy lights. CAN-BUS decoding helps avoid common installation issues in compatible vehicles. Each unit is designed for simple plug-and-play installation with standard automotive connectors. 36 mm diameter LED modules in a 2-pack for straightforward replacement White high-brightness LEDs for clear, even illumination Aluminum alloy housing with high-temperature resistance Low power consumption with steady, non-fading beams CAN-BUS compatible to minimize dashboard error indicators Specifications: 2-pack; 36 mm diameter; aluminum alloy housing; high-brightness white LEDs; energy efficient. Durable, corrosion-resistant build. Fit: Designed for 36 mm interior lighting sockets; verify space and polarity before installation.

Read more less

These Car Interior Door Panel Clips provide a practical, affordable option for reattaching interior panels after wear, breakage, or trim removal. The 100-pack uses durable plastic designed to endure frequent cabin use and occasional moisture exposure, without rust or corrosion. Ideal for DIY repairs when replacing damaged clips during panel removal for service, upgrades, or interior detailing across a range of vehicles. 100-piece pack covers common door panel clip sizes for quick replacements Durable, impact-resistant plastic resists wear, temperature changes, and moisture Tool-free installation: press and click to secure panels without screws Designed for a broad range of car models and interior trim designs Replaces worn or missing clips to restore solid panel alignment and reduce rattle Light specifications: Material: plastic; Pack size: 100 clips. Fit: Check your vehicle's clip type and mounting hole size to ensure compatibility before installation.

Read more less

This Soft Bristle Wooden Handle Dust Brush for Car Interior Cleaning is a practical tool for routine vehicle maintenance. It combines a lengthened wooden handle with soft fiber bristles to remove dust without scratching surfaces. Use it to reach air vents, center consoles, seat gaps and dashboard crevices. The lightweight design makes short-detailing sessions and quick touch-ups simple for drivers, rideshare operators, or anyone who stores cleaning tools in the glovebox. Handle: lengthened wooden handle with UV spray paint finish for a smooth, wear-resistant surface Bristles: soft fiber bristles arranged to minimize shedding and resist wear Size: approximately 25 x 10.5 cm for compact storage Weight: about 69 g—easy to maneuver during cleaning Compatibility: designed for interiors—vents, consoles, fabric and hard trim Specifications (approx.): 25x10.5 cm, 69 g, wooden handle, soft fiber bristles, UV-finish handle. Fit statement: Fits standard car storage compartments and is appropriate for most vehicle interiors; check measurements against your storage space if exact fit is required.

Read more less