This nozzle for Dyson hair dryers helps manage flyaways during daily styling. It is compatible with Dyson models HD01, HD02, HD03, HD04, HD08, and HD152, and offers two modes to smooth hair while drying. Use it during routine blow-drying to reduce frizz at the roots and along lengths, while guiding airflow through the hair for a sleek finish. Material: ABS plastic for durable use Size: 13 x 10.8 cm; weight about 117 g Two modes: smooth hair and anti-flyaway Airflow penetrates deep into the hair to detangle and smooth Note: nozzel? only; hair dryer not included Compatible with Dyson HD01, HD02, HD03, HD04, HD08, and HD152 Specifications: Material ABS; Size 13 x 10.8 cm; Weight ≈117 g. Fits compatible Dyson hair dryers listed above when using the dedicated nozzle attachment.

Lis Plus Moins

This replacement filter is designed for Xiaomi Air Purifier 1 and Air Purifier 2. It uses a three-layer filtration system with an accelerant to target formaldehyde, PM2.5, and odors. Use case: Ideal for homes dealing with new furniture emissions, cooking smells, or urban air, helping maintain cleaner indoor air between cleanings. Three-layer filtration with PP, PET, activated carbon, and accelerant. Specifically targets formaldehyde and PM2.5 while reducing odors. Accelerant material enhances decontamination and helps break contaminants into CO2 and H2O. Easy to install in Xiaomi Air Purifier 1 or 2. Replacement guidance: replace about twice a year for consistent airflow. Materials: PP, PET, accelerant, activated carbon. Light specifications Materials: PP, PET, accelerant, activated carbon Compatibility: Xiaomi Air Purifier 1 and Air Purifier 2 Dimensions: not provided Fit Fits Xiaomi Air Purifier 1 and 2 units; ensure correct alignment with the purifier’s filter slot when installing.

Lis Plus Moins

This replacement shaver head is designed for everyday grooming, featuring a stainless steel blade that delivers consistent cutting performance. It is built for easy maintenance and reliable compatibility. Ideal for quick swaps when wear is noticeable. Clean the shaver before installing, then snap the new head in place for regular use. Stainless steel blade provides durable, even cuts. Waterproof design allows rinsing under running water for simple cleaning. Easy to install and swap in minutes after cleaning the shaver. Environmentally friendly materials, durable and safe for daily use. Compatible with BG2026, BG2028, BG2036, TT2020 shavers. Specifications: Blade material: stainless steel; waterproof construction for wet or dry use; snap-in installation for easy replacement; compatible with BG2026, BG2028, BG2036 and TT2020. Fit: Works with BG2026, BG2028, BG2036 and TT2020 shavers.

Lis Plus Moins

This PTC Starter Relay for Refrigerator Use provides a compact, easy-to-install replacement relay for compatible refrigerators. It uses a 3-pin connection and a durable plastic housing in black. Ideal as a spare part when the compressor start relay fails or during routine maintenance. It offers a straightforward swap for DIY repairs without wiring changes. 3-pin connection compatible with standard refrigerator circuits Dimensions: 2.9 x 2.1 x 2.7 cm (1.1 x 0.8 x 1.1 in) Material: Plastic; Color: Black Net weight: 13 g; lightweight and easy to handle Easy to install; designed for direct replacement Package includes: 1 x PTC Starter Relay Light specifications: Small, non-conductive plastic body aids safe handling in tight appliance spaces. Fit: Suitable as a direct replacement for refrigerators that specify a 3-pin PTC starter relay.

Lis Plus Moins

Keep your dishwasher rack rolling smoothly with this 40 mm lower basket wheel replacement. It’s a simple, durable plastic wheel designed to replace a worn or broken part. When a basket wheel becomes loose or stops turning, this replacement helps maintain rack stability and proper loading. It's a practical solution for households using AEG Favorit, Privileg, and Zanussi dishwashers, where lower basket wheels are a common wear point. 40 mm diameter fits standard lower basket axles Made from sturdy plastic for repeated use Quick, tool-free snap-on installation Universal compatibility with AEG Favorit, Privileg, Zanussi lower baskets Replaces worn or detached wheels to restore basket glide Specifications: Material: plastic. Diameter: 40 mm. Fit: Designed for lower baskets that use 40 mm diameter wheels.

Lis Plus Moins

Carmen Bracket for Philips Shaver Series is a compact, daily-use accessory that helps organize and protect your shaver. Designed for Philips S1000, S1010, S1020, S1050, S1060 and S1070 models, it keeps the unit upright and within easy reach, with a stable resting place and a dedicated tool holder for maintenance accessories. Ideal for bathroom counters, vanities, or travel storage, this bracket maintains a tidy setup and reduces clutter in shared bathrooms or small apartments. Material: durable plastic that is lightweight and easy to clean. Includes Carmen bracket with an integrated tool holder for maintenance accessories. Easy to install; clean the shaver before mounting. Environmentally friendly materials designed to be safe for home use. Compact, space-saving design suitable for small counters and drawers. Fit: Philips S1000, S1010, S1020, S1050, S1060, S1070 shavers.

Lis Plus Moins

Xiaomi Replacement Water Filter for Mi Purifier, Activated Carbon, is a straightforward cartridge designed for Xiaomi’s water purifier. Designed for households using a Xiaomi Mi water purifier, it helps keep tap water's taste and odor neutral. Compatibility: fits Xiaomi Mi water purifier cartridges that use carbon filters. Filtration: activated carbon block reduces chlorine taste and odors. Replacement interval: replace 1–2 times per year. Installation: simple snap-in replacement; no tools required. Maintenance: sealed cartridge; replace and dispose per local guidelines. Pack contents: one replacement filter cartridge. Light specifications: Filtration media is activated carbon; designed for Xiaomi Mi water purifiers that accept carbon cartridges; standard cartridge dimensions fit common units. Fit: Suitable for Xiaomi Mi purifier models that accept carbon filter cartridges.

Lis Plus Moins

Replace or upgrade your freezer thermostat with the 425B7HH200977 controller. It operates at AC 250V, supports 4A/5A, and is compatible with 50/60 Hz power supplies in typical home refrigerators. Use this controller to restore reliable temperature control after a thermostat fault. It provides a -1 to -9 C input range (Warm In) and -20 to 25 C output range (Warm Out), with a simple 2-terminal connection and a 0.75 m probe for flexible placement. The assembly uses a metal-plastic housing and includes a ~85 cm cord. AC voltage: 250V; current rating: 4A/5A; frequency: 50 Hz/60 Hz Temperature ranges: Warm In -1 to -9 C; Warm Out -20 to 25 C Dimensions: approx 5.4 x 2.5 x 5.6 cm; Cord length ~85 cm Material: metal and plastic; Terminal configuration: 2 terminals Probe length: ~0.75 m; compatible with refrigerators using WDF19-K middle upper wire three inserts Fit: Designed for refrigerators using the 425B7HH200977 thermostat with WDF19-K wiring configuration.

Lis Plus Moins

This 45 x 60 cm kitchen exhaust fan filter captures grease, smoke, and dust before they accumulate on your hood. Designed for kitchens with 45 x 60 cm hoods, it helps reduce buildup and simplifies maintenance. Replace the filter when it becomes dirty to maintain airflow and kitchen cleanliness. Size and material: 45 x 60 cm; unwoven cloth; white color. Traps grease, oil mist, smoke and dust to reduce buildup. Simple replacement: remove a dirty filter and install a fresh one. Supports steady airflow without sagging or tearing during cooking. Compatible with standard 45 x 60 cm exhaust fans and hoods. Easy to store and handle; lightweight and flexible. Specifications: Size 45 x 60 cm; Material unwoven cloth; Color white. Fit: Designed to fit 45 x 60 cm exhaust fans and standard kitchen hoods.

Lis Plus Moins

This rotating three-head shaver replacement head offers a practical upgrade for Philips shavers. Constructed from polycarbonate, it weighs about 60 g and is designed for safe, easy maintenance. Use it to refresh a worn-out shaving surface, restore close shaves, and simplify cleaning after use. Rinse under running water to remove clippings. Compatible with Philips models: S6000, S6011, S6580, S6650, S7000, S7310, S7370, S7510, S7520, S7530, S7710, S7720, S7780, S7940, S7950, S7960, S797, S7980, SW6700, SW7700. Rotating three-head design maintains even contact across the skin for consistent trimming. Material: durable polycarbonate (PC), resistant to moisture with daily use. Easy cleaning: rinse under water; no detergents required. Environmentally friendly materials designed for durability and reuse. Specifications: Material—PC; Weight—approximately 60 g; Shaver head—Rotating 3 heads. Fit: Compatible with Philips shavers that use a rotating three-head head, including the models listed above.

Lis Plus Moins

Razor Head for Philips Shavers is a durable replacement part designed to restore everyday grooming performance. Use it when your current head shows reduced cutting efficiency or after cleaning to maintain smooth shaves. It is compatible with a wide range of Philips shaver models. Material: ABS; Cleaning method: water washing. Rotating 3-head design for even contact with skin. Environmentally friendly materials; healthy and safe. Compatibility: S8000/S8860/S8870/S8880/S8980/S9031/S9111/S9151/S9152/S9181/S9311/S9511/S9512/S9521/S9711/S9712/S9721/S9731/S9781/S9911/S9988/SW9700. Easy replacement with no special tools. Specifications: ABS body; washable with water; rotating 3-head configuration. Fit: Direct replacement for the listed Philips shavers; verify model compatibility before purchase.

Lis Plus Moins

Razor Cutter Accessories provide a universal replacement part for compatible shaving machines. Made from steel, it offers durable, rust-resistant construction for routine maintenance. This part is intended for replacing a worn cutter to maintain consistent shaving performance. It fits a wide range of models, making it suitable for personal grooming kits and repair projects. Material: steel with rust‑resistant construction Compatibility: S5570, S5560, S5380, S5370, S5230, S5210, S5091, S5130, S5110, S5095, S5090, S5082, S5081, S5080, S5079, S5078, S5077, S5015, S5013, S5011, S5010, S5008, S5000, S5420, S5076 Function: replacement cutter for shaving Weight: approximately 3 g; lightweight for easy handling Power/Voltage: depends on the shaver model; no built‑in power requirement Installation: designed for simple swap-in replacement on compatible models Optional specifications: weight 3 g; material steel. Fit: verify model compatibility with your shaver before purchase to ensure proper fit.

Lis Plus Moins

Gray anti-lifting nozzle for Dyson hair dryer accessory that helps shape and smooth hair by directing controlled, focused airflow for consistent results. Designed for home use, it helps achieve salon-like blowouts with reduced frizz, smoother ends, and more even drying across different hair types. Improves airflow efficiency for faster drying while keeping heat exposure manageable. Guides air along the hair shaft to reduce lift, frizz, and flyaways. Lowers air temperature by about 12°C for gentler styling and less product evaporation. Helps maintain natural moisture balance for healthier shine and less brittleness. 45-degree shaping technique: rotate the nozzle while styling to lift hair behind the head without overheating edges. Specifications: Color gray; Material heat-resistant plastic; Compatibility Dyson Supersonic hair dryer; Weight lightweight and balanced to reduce hand fatigue. Fit: Attaches to the Dyson nozzle and stays secure during use; for best results, use on damp hair and finish with cool airflow.

Lis Plus Moins

Gas Stove Switch Protective Cover, transparent, fits 6 cm diameter stove switches. Made from heat‑resistant material that remains stable up to 120°C, it helps shield the control from steam, splashes, and stains. Use this cover to protect the switch area during cooking and to help prevent accidental toggle. It also provides a barrier that can minimize oil exposure around the handle. Size: 6 cm diameter, 4 cm height; color: transparent Material: heat‑resistant safety material rated up to 120°C Functions: reduces risk of gas leakage by keeping the switch clean and protected; isolates oil stains Maintenance: easy to clean with a damp cloth; wipeable surface Safety: minimizes accidental switch operation during busy cooking Compatibility: suitable for gas stove switches with a ~6 cm diameter Specifications: 6 cm dia x 4 cm height; transparent; temperature rating up to 120°C. Fit: designed to fit gas stove switches with a 6 cm diameter for a secure, unobtrusive addition to your stove top.

Lis Plus Moins

The Air Conditioner Fin Cleaning Tool Coil Comb Folding Brush is a compact tool designed to clean and restore straight condenser fins on air conditioning units. Use it during routine maintenance to remove dust from straight condenser fins and to straighten fins that have bent, helping airflow and overall system efficiency. Stainless steel comb teeth provide durable, precise dust removal. Aluminum handle keeps the tool light and resistant to corrosion. Folding design with a white hoop to fix the wire and adjust tension; pull the hoop inward to set, insert into the condenser, then pull down to clean. Compact size 25 x 141 mm with 53.5 mm bristle length and 1 mm bristles. Total weight 50 g for easy handling in tight spaces. Specifications: Dimensions 25 x 141 mm; Bristle length 53.5 mm; Bristle thickness 1 mm; Weight 50 g; Material: stainless steel comb, aluminum handle. Fit: Designed for straight condenser fins on standard air conditioning units.

Lis Plus Moins

Philips Shaver Replacement Heads in Silver are spare blade heads designed for everyday maintenance of compatible razors. This replacement head helps maintain a close, even shave by replacing worn blades. It’s intended for routine upkeep and is easy to swap after cleaning the shaver. Compatible with PT870/PT877/PT878/PT927/AT830/AT880/AT920/AT928/4600 series shavers Easy installation after cleaning the shaver head; no tools required Material: plastic housing; color: silver finish Replacement head designed for daily shaving routines Provides a fresh blade surface for consistent contact and performance Secure fit reduces blade movement during shaving Lightweight, compact design for easy handling and storage Fit: Compatible with the models listed above; verify your shaver model to ensure compatibility.

Lis Plus Moins

Keep your razor ready for regular grooming with this 3-pack blade set for home use. Ideal as a spare replacement for routine maintenance; replace worn blades to maintain a clean, even shave. Clean the shaver head before installation to ensure proper seating. 3 blades per pack for convenient replacements Steel construction for durable, sharp performance Easy installation after cleaning the shaver head Broad compatibility with listed models: S300, S301, S311, S321, S330, S331, S360, S5420 and S100, S101, S106, S108, S110, S111, S116, S118 Designed for home use with a straightforward replacement process Precise fit ensures consistent cutting alignment Specifications: 3 blades per pack; steel construction; color silver. Fit: Compatible with S300, S301, S311, S321, S330, S331, S360, S5420 and S100, S101, S106, S108, S110, S111, S116, S118.

Lis Plus Moins

Replacement Razor Shaver Blade Head for Philips Shavers is a ready-to-install spare module for Philips SP9860, SP9863, SP9880, and 9000-series models. The kit includes a head cover, three brackets, three blades, and three nets, in a stainless steel blade assembly with a plastic frame. When blades wear, swap in this replacement head to maintain a clean, close shave. Clean the shaver before installation to ensure proper seating. Complete assembly: head cover, 3 brackets, 3 blades, 3 nets Material: stainless steel blades, plastic housing Compatibility: Philips SP9860, SP9863, SP9880, 9000-series Easy installation: swap-in design for quick setup Maintenance: simple cleaning during replacement Proper orientation: ensure blades seat correctly for best results Light specifications: stainless steel blades, plastic housing. Fit: Compatible with Philips SP9860, SP9863, SP9880, and 9000-series shavers. Confirm model before installing.

Lis Plus Moins

The Shaver Adapter Charger for HQ Series uses a universal input and EU plug for daily charging of compatible shavers. It supports worldwide mains and delivers a steady 15V output. Ideal for home, dorm, or travel, this adapter keeps HQ shavers ready with a compact, lightweight design. Input: 100-240V AC, 50/60Hz Output: 15V DC, 5.4W (max) Rated power: 7.5W input Compatibility: HQ5/HQ6/HQ7/HQ8/HQ9 series and select RQ/HS models Design: compact EU plug adapter for travel Light specifications: Rated input power 7.5W; input 100-240V, 50/60Hz; output 15V, 5.4W. Fit: EU plug design intended for HQ shavers in the listed compatibility scope; verify your model against the product scope before use.

Lis Plus Moins

This Dyson Hair Dryer Straight Nozzle Attachment with Magnetic Clip is a practical add-on for compatible Dyson dryers. It attaches magnetically and features a heat-resistant outer shell for safer styling. Ideal for quick straightening at home or between sessions. The V-shaped opening guides hair with minimal snag, while the anti-scalding shell protects fingers. The magnesium-aluminum alloy panel heats quickly without preheating. Magnetic clip attachment for tool-free, secure mounting on Dyson dryers. V-shaped opening guides hair and reduces snag during clipping. Anti-scalding outer shell for safer handling during styling. Enlarged panel increases contact area for efficient straightening in a single pass. Fast-heating magnesium-aluminum alloy panel heats up quickly with no preheat. Dimensions: 16 x 5.4 cm; panel width 4.5 cm; weight 0.2 kg. Light specs: Material — anti-scalding shell; panel — magnesium-aluminum alloy. Weight 0.2 kg. Dimensions 16 x 5.4 cm (panel width 4.5 cm). Fit: Magnetic attachment works with Dyson dryers that use a compatible magnetic nozzle.

Lis Plus Moins

This Measuring Cup Sealing Lid provides a 100 ml measure and a sealing cap for Thermomix bowl openings. Built from durable plastic, it helps minimize heat loss during mixing and prevents spills. Use it when you need a quick 100 ml portion or want to add ingredients mid-process without removing the lid. It is compatible with Thermomix TM6, TM5, and TM312 for everyday cooking tasks. 100 ml measurement mark for quick portioning Seals the bowl opening to reduce heat loss and spills Compatible with Thermomix TM6, TM5, and TM312 Durable plastic construction with impact resistance Dimensions: diameter 65 mm, height 52 mm Easy to handle and clean Specifications: diameter 65 mm; height 52 mm; material: plastic; 100 ml marked on the lid. Fit: designed to fit Thermomix bowl openings for TM6, TM5, TM312 models.

Lis Plus Moins

The Thermomix Cutter Kit Replacement Container Set provides a practical, ready-to-use replacement for daily kitchen tasks with Thermomix TM5 and TM6. It uses a durable mix of ABS, acrylic, and stainless steel components to support repeated use and blade assembly maintenance. Package contents: 1 container, 1 top cover, 1 push rod, 1 cutting disc, 1 rocker Durable materials: ABS, acrylic, stainless steel construction for long‑term use Easy installation: no tools required, quick swap of damaged parts Dishwasher-safe and easy to clean for routine maintenance Compatible with Thermomix TM5 and TM6 processors For daily replacement to extend the life of your cooking machine Specifications: Material mix includes ABS, acrylic, and stainless steel; compatible with TM5 and TM6. Fit: Designed to replace the cutter kit in Thermomix TM5 and TM6 units.

Lis Plus Moins

This refrigerator thermostat controller features a metal body for durability and a precise switching mechanism to regulate cooling. Designed for replacement, it helps restore stable temperatures when the original thermostat fails. Ideal for repair or upgrade projects in compatible models, it manages compressor cycling to maintain consistent fridge temperatures. Use it to replace worn parts in domestic refrigerators that require a 250 V, 4–5 A thermostat. Model: 425B7HH200977 Voltage & current: AC 250V; 4A/5A; 50/60 Hz Temperature ranges: Warm In -1°C to -9°C; Warm Out -20°C to 25°C Construction: metal body with plastic components; 26 terminals Dimensions & cord: 5.4 × 2.5 × 5.6 cm; cord length 85 cm Compatibility: WDF18-L, WDF20-L, WDF19-K, WPF22-L Optional light specifications: Compact form factor and a standard 85 cm cord support easy installation in standard appliance openings. Fit: Compatible with WDF18-L, WDF20-L, WDF19-K, and WPF22-L refrigerator thermostats.

Lis Plus Moins

The Ceramic Cutter Head for Trimmer with 24 Teeth Replacement Blade provides dependable control for detailed grooming. Its ceramic blade offers a smooth, sharp cut close to the skin, with reduced jam risk and less heat buildup during use. Ideal for professional barbers and home grooming, it adds length and style to trimming sessions while maintaining control. The head is suitable for animal hair trimming as well, making it versatile for pets or home grooming scenarios. 24-teeth ceramic cutter head for even, consistent cuts Smooth, sharp ceramic surface minimizes snagging and pulls Reduces jam risk and heat buildup during trimming sessions Durable construction with quick, tool-free installation Suitable for barber shops and home grooming environments Also suitable for animal hair trimming Compatible with most electric clippers on the market Specifications: Material: ceramic; Teeth: 24; Compatible with most electric clippers on the market. Fit: Designed to fit most universal electric clippers on the market.

Lis Plus Moins