Indoor Lighting & Accessories

Wireless Flowing Water Controller for LED Strip Lights provides app-based control of animated, water-like effects for 12–24V LED installations. It supports up to 1024 control points and uses Bluetooth 5 for direct mobile operation. Use it to add subtle motion to under-cabinet lighting, retail displays, or portable signage where minimal wiring is preferred. The controller works with a 12–24V DC supply or a 27A 12V battery for temporary setups (battery not included). Supports 12–24V LED strips; up to 1024 pixels/control points. Bluetooth 5 wireless control; effective range under 15 m in typical interiors. Ten preset flowing modes adjustable via mobile app (no hub required). Compact inline controller for easy installation behind fixtures or in enclosures. Portable power option using a 27A 12V battery for short-term displays. Specifications: Voltage 12–24V DC; Wireless: Bluetooth 5; Effects: 10 presets. Fit: Designed for small to medium LED strip projects and decorative accents requiring animated flow effects.

Read more less

The Knob Controller Dimmer for single-color LED strip light provides manual, knob-based brightness control for 12–24 V DC LED strips in a compact, weather-resistant package. Use it for under-cabinet lighting, display cases, signage accents or outdoor damp locations where a small IP65 controller is needed. Suitable for installers and DIYers who need steady, one-channel dimming without complex programming. Input/output: 12–24 V DC input; one-way single-color output. Load limits: Max current <6 A; output power: 5 V up to 30 W, 12 V up to 72 W, 24 V up to 144 W. Control: Smooth rotary knob for continuous brightness adjustment. Protection: IP65-rated housing for moisture resistance in damp or exposed spots. Size & weight: 61 × 33 × 32 mm; 36 g—compact for tight installations. Specifications: Static power <1 W; single-channel output; fits standard 12–24 V single-color LED strips. Fit statement: Match the controller voltage and stay under 6 A total load; compatible with single-color LED strips and typical junction boxes or enclosures.

Read more less

Compact five-pack of mini 3-key dimmers for single-color LED strip lights. Each controller provides on/off and stepped brightness control in a low-profile, IP65-rated enclosure suitable for damp locations. Use for under-cabinet lighting, shelf accents, or small decorative backlighting where space is limited. The set supports multi-zone layouts without extra wiring complexity and installs inline with 12–24 V DC single-color strips. Compact size: 42 × 12 × 3 mm; 3.5 g each, fits tight channels and recessed cavities. Electrical: Input 12–24 V DC; load current <6 A per dimmer. Output power: 5 V <30 W; 12 V <72 W; 24 V <144 W. Interface: Three-button control for on/off and dimming. Durability: IP65 enclosure for protection against splashes and dust. Light specifications: static power consumption <1 W per unit. Fit: Designed for 12–24 V DC single-color LED strips and compatible drivers; keep total draw per dimmer under 6 A.

Read more less

The E27 Turnable Lamp Holder converts a standard E27 socket into a 90° adjustable socket, allowing precise control of bulb orientation without rewiring. Use it to redirect light in floor lamps, desk lamps, pendant retrofits, or ceiling fixtures where bulb angle affects glare, task lighting, or shadow control. Easy retrofit for DIY lighting adjustments. Adjustable angle: 90° rotation to direct light where needed. Compatibility: E27-to-E27 adapter fits standard E27 bulbs and sockets. Materials: Metal body with copper screw contacts for stable conductivity. Heat resistance: Designed for temperatures typical in household fixtures. Installation: Screw-in design requires no tools beyond hand-tightening. Light specifications: Metal housing; copper contacts; suitable for incandescent, LED, and CFL bulbs with E27 base (check bulb wattage against fixture rating). Fit: Compatible with standard E27 fixtures; verify socket clearance and orientation before installation.

Read more less

The E27 Socket Light Holder with UK Plug is a compact, plug-in lamp holder for rooms and small retail displays. It combines an E27 screw socket with a UK 3-pin plug and a built-in on/off switch for quick outlet control. Use it to convert a shelf, desk or temporary display into a lamp-ready surface without rewiring. Ideal for renters, market stalls, or workshops where permanent fixtures are not practical. Integrated switch: On/off rocker on the unit for convenient operation. Compatibility: Accepts standard E27 bulbs (LED, CFL, incandescent; bulb not included). Plug type: UK 3-pin fitted for standard British outlets. Construction: Gloss-finish plastic housing with molded contacts for reliable connection. Compact design: Low-profile form for use on shelves, lamps, and temporary fittings. Specifications: Material: plastic; Finish: gloss; Bulb base: E27; Plug: UK 3-pin. Fit: Works with any standard E27 bulb and fixtures designed for E27 sockets.

Read more less

Compact waterproof LED driver for outdoor fixtures that delivers a steady constant-current output. The aluminum alloy shell and epoxy silicone encapsulation protect electronics from moisture and aid heat dissipation. Use-case: designed for exterior LED lamps, floodlights, street lights, miner lamps and tunnel lighting where a reliable 24–38V DC, 1.5A drive is required. Suited to installations exposed to rain, temperature swings and vibration. Output: Constant current 1500mA ±5% for stable LED brightness. Input range: AC 85–265V, 50/60Hz for wide compatibility. Enclosure: Thick aluminum alloy body for mechanical protection and thermal transfer. Waterproofing: Epoxy silicone encapsulation provides internal high-density sealing. Temperature: Operates between −40°C and 80°C for outdoor conditions. Specifications (light): Size 90 × 36 × 27 mm; Output DC 24–38V. Fit: for outdoor LED fixtures needing 24–38V DC at 1.5A constant current.

Read more less

The LED driver adapter is a compact, weather-ready constant-current power module for outdoor LED fixtures. It delivers 24–38 V DC at 900 mA with a wide AC input range for flexible installation. Designed for exterior lighting projects such as street lights, floodlights, tunnel lights and miner lamps, this adapter simplifies wiring and thermal management in confined housings and exposed locations. Input range: AC 85–265 V, 50/60 Hz for global compatibility Output: DC 24–38 V, constant current 900 mA ±5% Enclosure: thickened aluminum alloy shell for heat dissipation Protection: internal epoxy silicone encapsulation for moisture resistance Temperature range: operates from −40 to 80 °C Light specifications: size 88 × 30 × 20 mm; compact footprint suits narrow fixture cavities. Fit statement: Intended for fixtures that require 24–38 V DC at 900 mA; verify connector and mounting clearance before installation.

Read more less

The 24V 4A regulated switching power supply provides a steady DC source for LED installations where consistent brightness and low flicker are required. Use this compact unit for indoor retail displays, architectural accent lighting, control cabinets, or DIY LED strip projects that need a constant-voltage 24V feed. Its universal AC input suits varied mains voltages. Output: 24V DC up to 4A (96W) for LED strips, modules, and signage Input range: 88–264V AC for worldwide compatibility Protection: built-in overcurrent, short-circuit, and overvoltage safeguards Design: regulated switching topology to reduce voltage drift and flicker Size: compact enclosure 255 × 49 × 29 mm for tight mounting spaces Specifications (light): Input 88–264V AC; Output 24V DC, 4A; Enclosure 255×49×29 mm. Fit: Compatible with LED fixtures and strips specified for constant-voltage 24V input.

Read more less

The LED regulated switching power supply provides a constant-voltage output for stable LED lighting. Its compact design supports reliable operation in confined installations. Use this supply for LED strips, panels, and sign lighting where steady voltage is required to avoid flicker and uneven brightness. Suitable for installers replacing bulky transformers or fitting into shallow housings. Constant voltage design maintains uniform brightness across LED loads. Universal AC input 88–264 V AC for global compatibility and easy deployment. Compact footprint 170 x 49 x 29 mm fits tight fixtures and recessed enclosures. Protection features built-in overload, short-circuit, and over-temperature response. Low operating temperature reduces stress on LEDs and extends service life. Specifications: dimensions 170×49×29 mm; constant-voltage output; isolation between AC/DC. Fit: mounts in standard LED fixtures and enclosures sized for a 170 x 49 x 29 mm module.

Read more less

This 20W IP65 waterproof LED driver provides a constant-current supply for outdoor lighting that requires reliable DC drive. It is designed for floodlights, street lamps, tunnel lighting, and miner lamps exposed to dust and moisture. Use it where stable brightness and weather resistance matter: mounting inside outdoor luminaires, retrofit flood fixtures, or small streetlight assemblies. The aluminum enclosure and epoxy encapsulation reduce heat and protect internal components in variable temperatures. Power: 20W constant-current output (DC 24–38V) Current: 600 mA ±5% for consistent LED brightness Input: AC 85–265V, 50/60 Hz compatibility Ingress protection: IP65; suitable for rain and dust exposure Construction: Thick aluminum shell with epoxy silicone encapsulation Temperature range: -40 to 80°C for outdoor conditions Light specifications: size 83 × 30 × 20 mm; compact form for tight housings. Fit statement: Intended for fixtures requiring a 24–38V DC, 600 mA constant-current driver. Check fixture voltage/current needs before installation.

Read more less

The Waterproof Five-Way Junction Box protects circuit connections in outdoor and harsh environments. Constructed from PC plastic with IP68 sealing, it provides insulated, weather-resistant routing for up to five cables. Use cases include solar array wiring, garden and pathway lighting runs, and protected control-circuit joins where multiple cables converge; the five-way layout simplifies distribution and reduces the need for separate connectors. Five-way distribution: routes power or signal to multiple cables without additional junctions. Durable material: polycarbonate (PC) housing, sunproof and rated 94-V2 for flame retardance. Water and dust protection: IP68 sealing with supplied sealing rings for outdoor exposure. Electrical rating: 24 A, 450 V suitable for low-voltage power and many control circuits. Complete kit: includes terminal, 6 screws, and 6 sealing rings for assembly and mounting. Specifications (light): box size 72×48.5×37 mm; overall 130×109×37 mm; weight 119 g; cable entry ranges 4–9 mm, 9–12 mm, 12–15 mm. Fit: compatible with cables 4–15 mm using the supplied sealing rings and screws for secure installation in enclosures.

Read more less

This E12 to E14 bulb adapter converts an existing E12 socket to accept E14 bulbs, finished in black for discreet integration with lamps and fixtures. Use it to update older fixtures for compatibility with contemporary E14 LEDs or incandescent bulbs without rewiring or replacing the fixture. Suitable for desk lamps, chandeliers, wall sconces and ceiling lights where space is limited. Compact construction: small, lightweight design preserves fixture clearance and shade fit. Materials: copper conductor with fire‑resistant PBT insulation for electrical contact and thermal resistance. Compatibility: external E12 thread to internal E14 socket for standard household bulbs. Finish: matte black to match common fixture colors. Installation: screw-in adapter; no tools required for most lamp bases. Specifications: supports standard E14 bulb bases; size: compact adapter ~standard adapter dimensions; color: black; material: copper + PBT. Fit: intended for residential E12 sockets and E14 bulbs; verify socket clearance and bulb size before use.

Read more less

This LED strip light power supply features an iron housing and a regulated DC output designed for everyday installations. The metal enclosure aids heat dissipation and protects internal components for steady operation. Use it for under‑cabinet lighting, retail display cases, or DIY lighting runs where a protected, regulated source is needed. Built‑in protections reduce service interruptions and limit interference with nearby electronics. Durable housing: iron casing with protective finish for mechanical protection and thermal conduction. Output type: regulated DC suitable for standard LED strip systems. Protection features: short‑circuit, overload, and overvoltage protection included. EMI filter: built‑in filter to minimize interference with radios and controllers. Efficiency: designed for consistent operation and reduced energy loss. Specifications (optional): iron housing; DC regulated output; integrated EMI filter. Fit statement: Compatible with standard LED strips requiring a regulated DC supply and built‑in protection features.

Read more less

The E17 to E14 lamp bulbs adapter converts an E17 socket to accept standard E14 screw-base bulbs, enabling reuse of existing E14 bulbs in compact fixtures without changing the fixture. Use it in table lamps, nightlights, or ceiling fixtures where the socket is E17 but you have E14 bulbs on hand. It helps avoid buying new bulbs or replacing lamp holders when space is limited. Compact design: low-profile adapter fits tight fixtures and shades. Materials: conductive copper contact with fireproof PBT body for electrical connection and insulation. Compatibility: accepts standard E14 bulbs; connects to external E17 sockets. Installation: simple screw-in interface, no tools required. Heat tolerance: suitable for typical indoor lamp temperatures when used with compatible bulbs. Specifications: External interface E17; internal interface E14; materials copper + PBT. Fit: Designed for lamps and fixtures with an E17 socket where an E14 bulb is preferred.

Read more less

The Smart WiFi LED RGB Controller with IR Remote provides WiFi and infrared control for GRB LED strips, supporting DC 5–24V and up to 100W output in a compact 53×24×11 mm module. Use it to add adjustable color and brightness to living rooms, desks, cabinets, or gaming setups. Control via the Magic Home Pro app on Android/iOS or use the included IR remote as an offline backup. Dual control: WiFi app control and IR remote for local operation. Wide voltage range: DC 5–24V compatible with common LED strip power supplies. Output: Up to 100W, suitable for multiple short-to-medium length GRB strips. Compact size: Main unit 53×24×11 mm; remote 84×51×7 mm for discreet installation. Range and support: IR range up to 30 m; Magic Home Pro app on Android 4.0+ and iOS 9.0+. Light specifications: Channels GRB; operating temp -20°C to 50°C; control methods WiFi and IR. Fit: Designed for 5–24V RGB LED strips with GRB wiring and standard controller connections.

Read more less

The B15 to E14 Lamp Bulb Adapter Converter converts a B15 socket to accept E14 bulbs, expanding compatible bulb choices without replacing fixtures. It is compact and designed for indoor residential lighting. Use it to adapt table lamps, wall sconces, or small ceiling fixtures when you want to fit commonly available E14 bulbs for different color temperatures or LED replacements. Installation is tool-free and reversible. Interface: external B15 base to internal E14 socket Material: copper core conductor with fire‑resistant PBT housing Installation: tool-free, plug-in adapter for quick swaps Size: small, lightweight profile to fit most household fixtures Safety: designed for indoor use with basic heat resistance Light specifications: supports standard E14 bulb sizes and typical household wattages; not rated for outdoor or high‑temperature industrial use. Fit statement: compatible with standard B15 sockets and E14 bulbs in most residential lamps and fixtures.

Read more less

The LED Light Strip Controller with Bluetooth App Remote provides smartphone control for compatible 5V LED strips via a Bluetooth connection. It manages color, brightness and dynamic effects from a mobile app without additional hardware. Use it for living rooms, desks, cabinets or gaming setups to create consistent ambient lighting. Music-reactive modes and per-point color control let you match scenes to media or work tasks, and the USB 5V power keeps installation simple. Bluetooth app control: Pair and adjust settings from a phone within an open-area range up to 40 m. Color & brightness: Fine-grained color selection with block or gradient options and precise brightness control. Dynamic effects: Built-in music sync, color bounce and customizable animations via the app. Power & connectivity: USB-powered (5V) for easy integration with common strip kits. Per-point customization: Address individual LEDs for scene-accurate results. Specifications: Rated 5V, USB connection, Bluetooth mobile app control, 40 m open-range. Fit: Designed for USB-powered 5V LED strips; pairs with most 5V strip kits via the app.

Read more less

The E27 to B22 light bulb adapter lets you use B22 bayonet bulbs in fixtures with an E27 screw socket. It converts the E27 inner thread to a B22 outer bayonet, enabling more bulb choices without changing lamps or fittings. Use it in table lamps, ceiling fixtures, floor lamps or for temporary testing during bulb selection. Suitable for DIY lighting swaps and situations where replacing the fixture is impractical. Conversion type: E27 (screw) to B22 (bayonet) Installation: Tool-free—screw into E27 socket, insert B22 bulb Materials: copper conductive core, fire‑proof PBT housing Safety: high‑temperature resistant design for typical residential use Size & weight: compact 63×37×37 mm; 24 g Specifications: Size 63 x 37 x 37 mm; weight 24 g; conductive copper + fire‑proof PBT. Fit: Designed for standard E27 sockets to accept B22 bulbs in residential lighting fixtures.

Read more less

The E27 to E27 Light Lamp Bulbs Extension Adapter Converter provides a 95 mm inline extension for standard E27 screw bases, creating space between a bulb and its fixture without tools. Use it to move bulbs away from recessed sockets, inside tight lampshades, or where heat or contact risk exists. It accepts standard E27 bulbs on both ends and works with most residential fixtures, simplifying installation for table lamps, ceiling fittings, and vanity lights. Length: 95 mm overall; housing 38 × 38 mm; weight 20 g Materials: conductive copper contacts and fire‑resistant PBT housing Compatibility: accepts standard E27 bulbs on both ends (male-to-female) Installation: tool-free screw-in between socket and bulb Safety: designed for typical household bulb temperatures Fit: Designed for standard E27 sockets in home lighting setups; confirm fixture clearance and bulb length before use.

Read more less

This 60 cm LED light strip connector cable links 2-pin JST LED strip segments with push-in male and female ends for tool-free assembly. The PVC-jacketed cable is intended for low-voltage decorative and architectural lighting where a short, flexible join is needed. Use it to extend runs, connect wall-washers or curtain and twinkle lights in tight or hard-to-reach areas. The compact 2‑pin JST ends suit narrow profiles and avoid re-soldering when rearranging layouts or replacing sections. Length: 60 cm flexible cable for short extensions Connectors: 2‑pin JST male and female, push-in Housing: PVC insulation for basic strain protection Installation: Tool-free plug-in connection Applications: LED strips, wall-washers, belt/curtain/twinkle lights Specifications: 60 cm length; 2‑pin JST connectors; PVC jacket. Fit: Designed to fit standard 2‑pin JST LED strip systems and similar low-profile lighting setups.

Read more less

This Magnetic LED Light for Home Cabinets and Night Use adds targeted, adjustable illumination where wired fixtures aren’t practical. Use it in kitchen cabinets, under shelves, or as a bedside reading light; the soft steady glow reduces eye strain while the 360° magnetic swivel lets you aim light precisely without tools. Mounting: Magnetic base plus double-sided tape for tool-free installation on metal or non‑metal surfaces. Controls: Touch-sensitive panel and remote control (up to 5 m) for on/off, brightness, color temperature, and timer settings. Adjustability: Continuous dimming and three color temperatures — 3000K, 4000K, 6000K — to match tasks and mood. Power: USB rechargeable with charge indicator; designed for repeated daily use without hardwiring. Placement: 360° rotating magnetic ball for precise aiming in tight spaces. Light specifications: 3 color temps, USB charging, remote range ~5 m. Fit: Designed to sit on shelves or inside cabinets and closets; suitable for most residential installations without permanent modification.

Read more less

This Space Rabbit Lamp projects stars and nebulae to create a calm, low-light environment for bedroom or living spaces. It combines a star projector and a basic desk lamp in one compact tabletop unit. Use on a nightstand or shelf for pre-sleep relaxation, quiet reading, or as ambient background lighting during conversations. Adjustable projection angle and customizable speed/brightness let you tune the effect without changing room lighting. Projection modes: stars and nebulae with eight nebula colors Timing: two auto-off options (45 or 90 minutes) Controls: remote control plus onboard adjustments for brightness and speed Power & compatibility: USB powered for use with adapters, power banks, or USB outlets Flexibility: functions as a star projector or basic desk lamp; adjustable projection angle Light specifications: USB power, remote control, multiple color modes. Fit: Compact design suits most nightstands and small desks; ideal for indoor mood lighting and casual stargazing.

Read more less

This starry projection lamp projects stars and nebulae with adjustable angle, speed, brightness and eight nebula colors to create subtle ambient lighting for bedrooms or desks. Use it for quiet evenings: reading, meditation, winding down before sleep, or as a low-glare desk lamp. USB power and two automatic timers (45/90 minutes) simplify setup and prevent overnight operation without manual shut-off. Projection control: adjustable angle for targeted coverage Light modes: eight nebula colors plus separate or combined star effects Adjustability: customizable speed and brightness for stars and nebulae Timers: 45- and 90-minute automatic shut-off Power: USB-powered for plug-in or power-bank use Light specifications: multiple color modes, variable brightness levels, compact footprint for bedside or desk placement. Fit statement: Suitable for small to medium rooms and users seeking flexible, low-profile ambient lighting without complex installation.

Read more less

Vintage LED Chandelier Lights combine retro filament styling with LED efficiency to update chandelier fixtures without rewiring. Anti-flicker circuitry and four adjustable color temperatures let you match warm or cool tones to room activities. Use in living rooms, dining areas, kitchens, or cafes where adjustable ambiance and steady light matter. Choose lower wattage for soft mood lighting or higher wattage for task areas that need clear, glare-controlled illumination. Adjustable color: four color temperatures (warm to cool) for different atmospheres. Power options: available in 2W, 4W, and 6W to balance brightness and energy use. Anti-flicker: steady output to reduce eye strain during extended use. Beam angle: 360° light distribution for even room coverage. Fit & styles: two aesthetic styles; compact, lightweight design for retrofit into existing chandeliers. Light specifications: LED, energy-saving, high light transmittance. Fit statement: compatible with most standard chandelier sockets; check socket type and physical dimensions before purchase.

Read more less